This patch contains two fixes:
* wsrep_handle_mdl_conflict(): handle the case where SR transaction
is in aborting state. Previously, a BF-BF conflict was reported, and
the process would abort.
* wsrep_thd_bf_abort(): do not restore thread vars after calling
wsrep_bf_abort(). Thread vars are already restored in wsrep-lib if
necessary. This also removes the assumption that the caller of
wsrep_thd_bf_abort() is the given bf_thd, which is not the case.
Also in this patch:
* Remove unnecessary check for active victim transaction in
wsrep_thd_bf_abort(): the exact same check is performed later in
wsrep_bf_abort().
* Make wsrep_thd_bf_abort() and wsrep_log_thd() const-correct.
* Change signature of wsrep_abort_thd() to take THD pointers instead
of void pointers.
Use my_thread_var::stack_ends_here inside lf_pinbox_real_free() for address
where thread stack ends.
Remove LF_PINS::stack_ends_here.
It is not safe to assume that mysys_var that was used during pin allocation,
remains correct during free. E.g with binlog group commit in Innodb,
that frees pins for multiple Innodb transactions, it does not work
correctly.
The fix consists of three commits backported from 10.3:
1) Cleanup isnan() portability checks
(cherry picked from commit 7ffd7fe962)
2) Cleanup isinf() portability checks
Original problem reported by Wlad: re-compilation of 10.3 on top of 10.2
build would cache undefined HAVE_ISINF from 10.2, whereas it is expected
to be 1 in 10.3.
std::isinf() seem to be available on all supported platforms.
(cherry picked from commit bc469a0bdf)
3) Use std::isfinite in C++ code
This is addition to parent revision fixing build failures.
(cherry picked from commit 54999f4e75)
Don't save/restore HP_INFO as it could be changed by a concurrent thread.
different parts of HP_INFO are protected by different mutexes and
the mutex that protect most of the HP_INFO does not protect its open_list
data.
As a bonus, make heap_check_heap() to take const HP_INFO* and not
make any changes there whatsoever.
Lock wait can happen on secondary index when doing FK checks for wsrep.
We should just return error to upper layer and applier will retry
operation when needed.
This applies to large allocations.
This maps to the way Linux does it in MDEV-10814 except FreeBSD uses
different constants.
Adjust error string to match to implementation.
Tested on FreeBSD-12.0
MYSQL_PLUGIN_IMPORT did not work correctly for the RocksDB helper library
rocksdb_aux_lib, because that library was not compiled with
-DMYSQL_DYNAMIC_PLUGIN.
Fix DBUG such that it does not depend on exported data, only on functions
(which do not need MYSQL_PLUGIN_IMPORT decoration)
Use a "getter" function _db_my_assert() instead of DLL-exported variable.
Also, reduce object code duplication by moving more of the DBUG_ASSERT
logic inside the _db_my_assert() function, and add unlikely() and
ATTRIBUTE_COLD hints to ensure that the 'assertion failed' code will
be separated from the main control flow logic. Thus, the compiler can
move the unlikely() code to the end of the compiled function, reachable
via a forward conditional branch, which the processor's branch predictor
could assume 'not taken'.
Commit 536215e32f in MariaDB Server 10.3.1
introduced the compiler flag (not cmake option) DBUG_ASSERT_AS_PRINTF
that converts DBUG_ASSERT in non-debug builds into printouts.
For debug builds, it could be useful to be able to convert DBUG_ASSERT
into a warning or error printout, to allow execution to continue.
This would allow debug builds to be used for reproducing hard failures
that occur with release builds.
my_assert: A Boolean flag (set by default), tied to the new option
debug_assert that is available on debug builds only.
When set, DBUG_ASSERT() will invoke assert(), like it did until now.
When unset, DBUG_ASSERT() will invoke fprintf(stderr, ...)
with the file name, line number and assertion expression.
- Added mariadb-# to load_default_groups to all mariadb-# scripts and
mariadb-binaries.
- Added mariadbd and mariadbd-"version" to load_default_groups for the
mysqld/mariadb server
- Added mariadb-client to load_default_groups for the mysql/mariadb client
Other things
- Ignored mysql-test/lib/My/SafeProcess/wsrep_check_version
- mysql_install_db will now automatically detect if run from srcdir
MDEV-19486 and one more similar bug appeared because handler::write_row() interface
welcomes to modify buffer by storage engine. But callers are not ready for that
thus bugs are possible in future.
handler::write_row():
handler::ha_write_row(): make argument const
On clang, use __builtin_readcyclecounter() when available.
Hinted by Sergey Vojtovich. (This may lead to runtime failure
on ARM systems. The hardware should be available on ARMv8 (AArch64),
but access to it may require special privileges.)
We remove support for the proprietary Sun Microsystems compiler,
and rely on clang or the __GNUC__ assembler syntax instead.
For now, we retain support for IA-64 (Itanium) and 32-bit SPARC,
even though those platforms are likely no longer widely used.
We remove support for clock_gettime(CLOCK_SGI_CYCLE),
because Silicon Graphics ceased supporting IRIX in December 2013.
This was the only cycle timer interface available for MIPS.
On PowerPC, we rely on the GCC 4.8 __builtin_ppc_get_timebase()
(or clang __builtin_readcyclecounter()), which should be equivalent
to the old assembler code on both 64-bit and 32-bit targets.
Starting with the Intel Skylake microarchitecture, the PAUSE
instruction latency is about 140 clock cycles instead of earlier 10.
On AMD processors, the latency could be 10 or 50 clock cycles,
depending on microarchitecture.
Because of this big range of latency, let us scale the loops around
the PAUSE instruction based on timing results at server startup.
my_cpu_relax_multiplier: New variable: How many times to invoke PAUSE
in a loop. Only defined for IA-32 and AMD64.
my_cpu_init(): Determine with RDTSC the time to run 16 PAUSE instructions
in two unrolled loops according, and based on the quicker of the two
runs, initialize my_cpu_relax_multiplier. This form of calibration was
suggested by Mikhail Sinyavin from Intel.
LF_BACKOFF(), ut_delay(): Use my_cpu_relax_multiplier when available.
ut_delay(): Define inline in my_cpu.h.
UT_COMPILER_BARRIER(): Remove. This does not seem to have any effect,
because in our ut_delay() implementation, no computations are being
performed inside the loop. The purpose of UT_COMPILER_BARRIER() was to
prohibit the compiler from reordering computations. It was not
emitting any code.
cmake -DCMAKE_C_COMPILER=clang -DCMAKE_CXX_COMPILER=clang++ -DCMAKE_BUILD_TYPE=Debug
Maintainer mode makes all warnings errors. This patch fix warnings. Mostly about
deprecated `register` keyword.
Too much warnings came from Mroonga and I gave up on it.
Restore the detection of default charset in command line utilities.
It worked up to 10.1, but was broken by Connector/C.
Moved code for detection of default charset from sql-common/client.c
to mysys, and make command line utilities to use this code if charset
was not specified on the command line.
Server and command line tools now support option --tls_version to specify the
TLS version between client and server. Valid values are TLSv1.0, TLSv1.1, TLSv1.2, TLSv1.3
or a combination of them. E.g.
--tls_version=TLSv1.3
--tls_version=TLSv1.2,TLSv1.3
In case there is a gap between versions, the lowest version will be used:
--tls_version=TLSv1.1,TLSv1.3 -> Only TLSv1.1 will be available.
If the used TLS library doesn't support the specified TLS version, it will use
the default configuration.
Limitations:
SSLv3 is not supported. The default configuration doesn't support TLSv1.0 anymore.
TLSv1.3 protocol currently is only supported by OpenSSL 1.1.0 (client and server) and
GnuTLS 3.6.5 (client only).
Overview of TLS implementations and protocols
Server:
+-----------+-----------------------------------------+
| Library | Supported TLS versions |
+-----------+-----------------------------------------+
| WolfSSL | TLSv1.1, TLSv1,2 |
+-----------+-----------------------------------------+
| OpenSSL | (TLSv1.0), TLSv1.1, TLSv1,2, TLSv1.3 |
+-----------+-----------------------------------------+
| LibreSSL | (TLSv1.0), TLSv1.1, TLSv1,2, TLSv1.3 |
+-----------+-----------------------------------------+
Client (MariaDB Connector/C)
+-----------+-----------------------------------------+
| Library | Supported TLS versions |
+-----------+-----------------------------------------+
| GnuTLS | (TLSv1.0), TLSv1.1, TLSv1.2, TLSv1.3 |
+-----------+-----------------------------------------+
| Schannel | (TLSv1.0), TLSv1.1, TLSv1.2 |
+-----------+-----------------------------------------+
| OpenSSL | (TLSv1.0), TLSv1.1, TLSv1,2, TLSv1.3 |
+-----------+-----------------------------------------+
| LibreSSL | (TLSv1.0), TLSv1.1, TLSv1,2, TLSv1.3 |
+-----------+-----------------------------------------+
Using different recommended speedup options for WolfSSL.
- Enable x64 assembly code on Intel.
- in my_crypt.cc, align EVP_CIPHER_CTX buffer, since some members need
alignment of 16 (for AESNI instructions), when assembler is enabled.
- Adjust MY_AES_CTX_SIZE
- Enable fastmath in wolfssl (large integer math).
