The problem occurs in parallel replication in GTID mode, when we are using
multiple replication domains. In this case, if the SQL thread stops, the
slave GTID position may refer to a different point in the relay log for each
domain.
The bug was that when the SQL thread was stopped and restarted (but the IO
thread was kept running), the SQL thread would resume applying the relay log
from the point of the most advanced replication domain, silently skipping all
earlier events within other domains. This caused replication corruption.
This patch solves the problem by storing, when the SQL thread stops with
multiple parallel replication domains active, the current GTID
position. Additionally, the current position in the relay logs is moved back
to a point known to be earlier than the current position of any replication
domain. Then when the SQL thread restarts from the earlier position, GTIDs
encountered are compared against the stored GTID position. Any GTID that was
already applied before the stop is skipped to avoid duplicate apply.
This patch should have no effect if multi-domain GTID parallel replication is
not used. Similarly, if both SQL and IO thread are stopped and restarted, the
patch has no effect, as in this case the existing relay logs are removed and
re-fetched from the master at the current global @@gtid_slave_pos.
The bug occurs when a transaction does a retry after all transactions have
done mark_start_commit() in a batch of group commit from the master. In this
case, the retrying transaction can unmark_start_commit() after the following
batch has already started running and de-allocated the GCO. Then after retry,
the transaction will re-do mark_start_commit() on a de-allocated GCO, and also
wakeup of later GCOs can be lost.
This was seen "in the wild" by a user, even though it is not known exactly
what circumstances can lead to retry of one transaction after all transactions
in a group have reached the commit phase.
The lifetime around GCO was somewhat clunky anyway. With this patch, a GCO
lives until rpl_parallel_entry::last_committed_sub_id has reached the last
transaction in the GCO. This guarantees that the GCO will still be alive when
a transaction does mark_start_commit(). Also, we now loop over the list of
active GCOs for wakeup, to ensure we do not lose a wakeup even in the
problematic case.
Implement a new mode for parallel replication. In this mode, all transactions
are optimistically attempted applied in parallel. In case of conflicts, the
offending transaction is rolled back and retried later non-parallel.
This is an early-release patch to facilitate testing, more changes to user
interface / options will be expected. The new mode is not enabled by default.
The code that handles free lists of various objects passed to worker threads
in parallel replication handles freeing in batches, to avoid taking and
releasing LOCK_rpl_thread too often. However, it was possible for freeing to
be delayed to the point where one thread could stall the SQL driver thread due
to full queue, while other worker threads might be idle. This could
significantly degrade possible parallelism and thus performance.
Clean up the batch freeing code so that it is more robust and now able to
regularly free batches of object, so that normally the queue will not run full
unless the SQL driver thread is really far ahead of the worker threads.
After-review changes.
For this patch in 10.0, we do not introduce a new public storage engine API,
we just fix the InnoDB/XtraDB issues. In 10.1, we will make a better public
API that can be used for all storage engines (MDEV-6429).
Eliminate the background thread that did deadlock kills asynchroneously.
Instead, we ensure that the InnoDB/XtraDB code can handle doing the kill from
inside the deadlock detection code (when thd_report_wait_for() needs to kill a
later thread to resolve a deadlock).
(We preserve the part of the original patch that introduces dedicated mutex
and condition for the slave init thread, to remove the abuse of
LOCK_thread_count for start/stop synchronisation of the slave init thread).
replication causing replication to fail.
Remove the temporary fix for MDEV-5914, which used READ COMMITTED for parallel
replication worker threads. Replace it with a better, more selective solution.
The issue is with certain edge cases of InnoDB gap locks, for example between
INSERT and ranged DELETE. It is possible for the gap lock set by the DELETE to
block the INSERT, if the DELETE runs first, while the record lock set by
INSERT does not block the DELETE, if the INSERT runs first. This can cause a
conflict between the two in parallel replication on the slave even though they
ran without conflicts on the master.
With this patch, InnoDB will ask the server layer about the two involved
transactions before blocking on a gap lock. If the server layer tells InnoDB
that the transactions are already fixed wrt. commit order, as they are in
parallel replication, InnoDB will ignore the gap lock and allow the two
transactions to proceed in parallel, avoiding the conflict.
Improve the fix for MDEV-6020. When InnoDB itself detects a deadlock, it now
asks the server layer for any preferences about which transaction to roll
back. In case of parallel replication with two transactions T1 and T2 fixed to
commit T1 before T2, the server layer will ask InnoDB to roll back T2 as the
deadlock victim, not T1. This helps in some cases to avoid excessive deadlock
rollback, as T2 will in any case need to wait for T1 to complete before it can
itself commit.
Also some misc. fixes found during development and testing:
- Remove thd_rpl_is_parallel(), it is not used or needed.
- Use KILL_CONNECTION instead of KILL_QUERY when a parallel replication
worker thread is killed to resolve a deadlock with fixed commit
ordering. There are some cases, eg. in sql/sql_parse.cc, where a KILL_QUERY
can be ignored if the query otherwise completed successfully, and this
could cause the deadlock kill to be lost, so that the deadlock was not
correctly resolved.
- Fix random test failure due to missing wait_for_binlog_checkpoint.inc.
- Make sure that deadlock or other temporary errors during parallel
replication are not printed to the the error log; there were some places
around the replication code with extra error logging. These conditions can
occur occasionally and are handled automatically without breaking
replication, so they should not pollute the error log.
- Fix handling of rgi->gtid_sub_id. We need to be able to access this also at
the end of a transaction, to be able to detect and resolve deadlocks due to
commit ordering. But this value was also used as a flag to mark whether
record_gtid() had been called, by being set to zero, losing the value. Now,
introduce a separate flag rgi->gtid_pending, so rgi->gtid_sub_id remains
valid for the entire duration of the transaction.
- Fix one place where the code to handle ignored errors called reset_killed()
unconditionally, even if no error was caught that should be ignored. This
could cause loss of a deadlock kill signal, breaking deadlock detection and
resolution.
- Fix a couple of missing mysql_reset_thd_for_next_command(). This could
cause a prior error condition to remain for the next event executed,
causing assertions about errors already being set and possibly giving
incorrect error handling for following event executions.
- Fix code that cleared thd->rgi_slave in the parallel replication worker
threads after each event execution; this caused the deadlock detection and
handling code to not be able to correctly process the associated
transactions as belonging to replication worker threads.
- Remove useless error code in slave_background_kill_request().
- Fix bug where wfc->wakeup_error was not cleared at
wait_for_commit::unregister_wait_for_prior_commit(). This could cause the
error condition to wrongly propagate to a later wait_for_prior_commit(),
causing spurious ER_PRIOR_COMMIT_FAILED errors.
- Do not put the binlog background thread into the processlist. It causes
too many result differences in mtr, but also it probably is not useful
for users to pollute the process list with a system thread that does not
really perform any user-visible tasks...
replication causing replication to fail.
In parallel replication, we run transactions from the master in parallel, but
force them to commit in the same order they did on the master. If we force T1
to commit before T2, but T2 holds eg. a row lock that is needed by T1, we get
a deadlock when T2 waits until T1 has committed.
Usually, we do not run T1 and T2 in parallel if there is a chance that they
can have conflicting locks like this, but there are certain edge cases where
it can occasionally happen (eg. MDEV-5914, MDEV-5941, MDEV-6020). The bug was
that this would cause replication to hang, eventually getting a lock timeout
and causing the slave to stop with error.
With this patch, InnoDB will report back to the upper layer whenever a
transactions T1 is about to do a lock wait on T2. If T1 and T2 are parallel
replication transactions, and T2 needs to commit later than T1, we can thus
detect the deadlock; we then kill T2, setting a flag that causes it to catch
the kill and convert it to a deadlock error; this error will then cause T2 to
roll back and release its locks (so that T1 can commit), and later T2 will be
re-tried and eventually also committed.
The kill happens asynchroneously in a slave background thread; this is
necessary, as the reporting from InnoDB about lock waits happen deep inside
the locking code, at a point where it is not possible to directly call
THD::awake() due to mutexes held.
Deadlock is assumed to be (very) rarely occuring, so this patch tries to
minimise the performance impact on the normal case where no deadlocks occur,
rather than optimise the handling of the occasional deadlock.
Also fix transaction retry due to deadlock when it happens after a transaction
already signalled to later transactions that it started to commit. In this
case we need to undo this signalling (and later redo it when we commit again
during retry), so following transactions will not start too early.
Also add a missing thd->send_kill_message() that got triggered during testing
(this corrects an incorrect fix for MySQL Bug#58933).
Handle retry of event groups that span multiple relay log files.
- If retry reaches the end of one relay log file, move on to the next.
- Handle refcounting of relay log files, and avoid purging relay log
files until all event groups have completed that might have needed
them for transaction retry.
Start implementing that an event group can be re-tried in parallel replication
if it fails with a temporary error (like deadlock).
Patch is very incomplete, just some very basic retry works.
Stuff still missing (not complete list):
- Handle moving to the next relay log file, if event group to be retried
spans multiple relay log files.
- Handle refcounting of relay log files, to ensure that we do not purge a
relay log file and then later attempt to re-execute events out of it.
- Handle description_event_for_exec - we need to save this somehow for the
possible retry - and use the correct one in case it differs between relay
logs.
- Do another retry attempt in case the first retry also fails.
- Limit the max number of retries.
- Lots of testing will be needed for the various edge cases.
If replication breaks in GTID mode, it is not trivial to determine the GTID of
the failing event group. This is a problem, as such GTID is needed eg. to
explicitly set @@gtid_slave_pos to skip to after that event group, or to
compare errors on different servers, etc.
Fix by ensuring that relevant slave errors logged to the error log include the
GTID of the event group containing the problem event.
MySQL 5.6 implemented WL#344, which is about a MASTER_DELAY option to CHANGE
MASTER. But as part of this worklog, the format of the realy-log.info file was
changed. The new format is not understood by earlier versions, and nor by
MariaDB 10.0, so changing server to those versions would cause the slave to
abort with an error due to reading incorrect data out of relay-log.info.
Fix this by backporting from the WL#344 patch just the code that understands
the new relay-log.info format. We still write out the old format, and none of
the MASTER_DELAY feature is backported with this commit.
The previous patch for this bug was unfortunately completely wrong.
The purpose of cached_charset is to remember which character set we
have installed currently in the THD, so that in the common case where
charset does not change between queries, we do not need to update it
in the THD. Thus, it is important that the cached_charset field is
tightly coupled to the THD for which it handles caching.
Thus the right place to put cached_charset seems to be in the THD.
This patch introduces a field THD:system_thread_info where such info
in general can be placed without further inflating the THD with unused
data for other threads (THD is already far too big as it is). It then
moves the cached_charset into this slot for the SQL driver thread and
for the parallel replication worker threads.
The THD::rpl_filter field is also moved inside system_thread_info, to
keep the size of THD unchanged. Moving further fields in to reduce the
size of THD is a separate task, filed as MDEV-6164.
Replication caches the character sets used in a query, to be able to quickly
reuse them for the next query in the common case of them not having changed.
In parallel replication, this caching needs to be per-worker-thread. The
code was not modified to handle this correctly, so the caching in one worker
could cause another worker to run a query using the wrong character set,
causing replication corruption.
When a transaction fails in parallel replication, it should signal the error
to any following transactions doing wait_for_prior_commit() on it. But the
code for this was incorrect, and would not correctly remember a prior error
when sending the signal. This caused corruption when slave stopped due to an
error.
Fix by remembering the error code when we first get an error, and passing the
saved error code to wakeup_subsequent_commits().
Thanks to nanyi607rao who reported this bug on
maria-developers@lists.launchpad.net and analysed the root cause.
With parallel replication, there can be any number of events queued on
in-memory lists in the worker threads.
For normal STOP SLAVE, we want to skip executing any remaining events on those
lists and stop as quickly as possible.
However, for START SLAVE UNTIL, when the UNTIL position is reached in the SQL
driver thread, we must _not_ stop until all already queued events for the
workers have been executed - otherwise we would stop too early, before the
actual UNTIL position had been completely reached.
The code did not handle UNTIL correctly, stopping too early due to not
executing the queued events to completion. Fix this, and also implement that
an explicit STOP SLAVE in the middle (when the SQL driver thread has reached
the UNTIL position but the workers have not) _will_ cause an immediate stop.
Clean up and improve the parallel implementation code, mainly related to
scheduling of work to threads and handling of stop and errors.
Fix a lot of bugs in various corner cases that could lead to crashes or
corruption.
Fix that a single replication domain could easily grab all worker threads and
stall all other domains; now a configuration variable
--slave-domain-parallel-threads allows to limit the number of
workers.
Allow next event group to start as soon as previous group begins the commit
phase (as opposed to when it ends it); this allows multiple event groups on
the slave to participate in group commit, even when no other opportunities for
parallelism are available.
Various fixes:
- Fix some races in the rpl.rpl_parallel test case.
- Fix an old incorrect assertion in Log_event iocache read.
- Fix repeated malloc/free of wait_for_commit and rpl_group_info objects.
- Simplify wait_for_commit wakeup logic.
- Fix one case in queue_for_group_commit() where killing one thread would
fail to correctly signal the error to the next, causing loss of the
transaction after slave restart.
- Fix leaking of pthreads (and their allocated stack) due to missing
PTHREAD_CREATE_DETACHED attribute.
- Fix how one batch of group-committed transactions wait for the previous
batch before starting to execute themselves. The old code had a very
complex scheduling where the first transaction was handled differently,
with subtle bugs in corner cases. Now each event group is always scheduled
for a new worker (in a round-robin fashion amongst available workers).
Keep a count of how many transactions have started to commit, and wait for
that counter to reach the appropriate value.
- Fix slave stop to wait for all workers to actually complete processing;
before, the wait was for update of last_committed_sub_id, which happens a
bit earlier, and could leave worker threads potentially accessing bits of
the replication state that is no longer valid after slave stop.
- Fix a couple of places where the test suite would kill a thread waiting
inside enter_cond() in connection with debug_sync; debug_sync + kill can
crash in rare cases due to a race with mysys_var_current_mutex in this
case.
- Fix some corner cases where we had enter_cond() but no exit_cond().
- Fix that we could get failure in wait_for_prior_commit() but forget to flag
the error with my_error().
- Fix slave stop (both for normal stop and stop due to error). Now, at stop
we pick a specific safe point (in terms of event groups executed) and make
sure that all event groups before that point are executed to completion,
and that no event group after start executing; this ensures a safe place to
restart replication, even for non-transactional stuff/DDL. In error stop,
make sure that all prior event groups are allowed to execute to completion,
and that any later event groups that have started are rolled back, if
possible. The old code could leave eg. T1 and T3 committed but T2 not, or
it could even leave half a transaction not rolled back in some random
worker, which would cause big problems when that worker was later reused
after slave restart.
- Fix the accounting of amount of events queued for one worker. Before, the
amount was reduced immediately as soon as the events were dequeued (which
happens all at once); this allowed twice the amount of events to be queued
in memory for each single worker, which is not what users would expect.
- Fix that an error set during execution of one event was sometimes not
cleared before executing the next, causing problems with the error
reporting.
- Fix incorrect handling of thd->killed in worker threads.
MDEV-4984: Implement MASTER_GTID_WAIT() and @@LAST_GTID.
MDEV-4726: Race in mysql-test/suite/rpl/t/rpl_gtid_stop_start.test
MDEV-5636: Deadlock in RESET MASTER
MASTER_GTID_WAIT() is similar to MASTER_POS_WAIT(), but works with a
GTID position rather than an old-style filename/offset.
@@LAST_GTID gives the GTID assigned to the last transaction written
into the binlog.
Together, the two can be used by applications to obtain the GTID of
an update on the master, and then do a MASTER_GTID_WAIT() for that
position on any read slave where it is important to get results that
are caught up with the master at least to the point of the update.
The implementation of MASTER_GTID_WAIT() is implemented in a way
that tries to minimise the performance impact on the SQL threads,
even in the presense of many waiters on single GTID positions (as
from @@LAST_GTID).
The problem was a race between the SQL driver thread and the worker threads.
The SQL driver thread would set rli->last_master_timestamp to zero to
mark that it has caught up with the master, while the worker threads would
set it to the timestamp of the executed event. This can happen out-of-order
in parallel replication, causing the "caught up" status to be overwritten
and Seconds_Behind_Master to wrongly grow when the slave is idle.
To fix, introduce a separate flag rli->sql_thread_caught_up to mark that the
SQL driver thread is caught up. This avoids issues with worker threads
overwriting the SQL driver thread status. In parallel replication, we then
make SHOW SLAVE STATUS check in addition that all worker threads are idle
before showing Seconds_Behind_Master as 0 due to slave idle.
MDEV-5217: Incorrect event pos update leading to corruption of reading of events from relay log
The rli->event_relay_log_pos was sometimes undated incorrectly when using
parallel replication, especially around relay log rotates. This could cause
the SQL thread to seek into an invalid position in the relay log, resulting in
errors about invalid events or even random corruption in some cases.
MDEV-5189: Error handling in parallel replication.
Fix error handling in parallel worker threads when a query fails:
- Report the error to the error log.
- Return the error back, and set rli->abort_slave.
- Stop executing more events after the error.
Fix some more parts of old-style position updates.
Now we save in rgi some coordinates for master log and relay log, so
that in do_update_pos() we can use the right set of coordinates with
the right events.
The Rotate_log_event::do_update_pos() is fixed in the parallel case
to not directly update relay-log.info (as Rotate event runs directly
in the driver SQL thread, ahead of actual event execution). Instead,
group_master_log_file is updated as part of do_update_pos() in each
event execution.
In the parallel case, position updates happen in parallel without
any ordering, but taking care that position is not updated backwards.
Since position update happens only after event execution this leads
to the right result.
Also fix an access-after-free introduced in an earlier commit.
Fix some part of update of old-style coordinates in parallel replication:
- Ignore XtraDB request for old-style coordinates, not meaningful for
parallel replication (must use GTID to get crash-safe parallel slave).
- Only update relay log coordinates forward, not backwards, to ensure
that parallel threads do not conflict with each other.
- Move future_event_relay_log_pos to rgi.
-row_stmt_start_timestamp
-last_event_start_time
-long_find_row_note
-trans_retries
Added slave_executed_entries_lock to protect rli->executed_entries
Added primitives for thread safe 64 bit increment
Update rli->executed_entries when event has executed, not when event has been sent to sql execution thread
sql/log_event.cc:
row_stmt_start and long_find_row_note is now in rpl_group_info
sql/mysqld.cc:
Added slave_executed_entries_lock to protect rli->executed_entries
sql/mysqld.h:
Added slave_executed_entries_lock to protect rli->executed_entries
Added primitives for thread safe 64 bit increment
sql/rpl_parallel.cc:
Update rli->executed_entries when event has executed, not when event has been sent to sql execution thread
sql/rpl_rli.cc:
Moved row_stmt_start_timestamp, last_event_start_time and long_find_row_note from Relay_log_info to rpl_group_info
sql/rpl_rli.h:
Moved trans_retries, row_stmt_start_timestamp, last_event_start_time and long_find_row_note from Relay_log_info to rpl_group_info
sql/slave.cc:
Use rgi for trans_retries and last_event_start_time
Update rli->executed_entries when event has executed, not when event has been sent to sql execution thread
Reset trans_retries when object is created
- Made slaves temporary table multi-thread slave safe by adding mutex around save_temporary_table usage.
- rli->save_temporary_tables is the active list of all used temporary tables
- This is copied to THD->temporary_tables when temporary tables are opened and updated when temporary tables are closed
- Added THD->lock_temporary_tables() and THD->unlock_temporary_tables() to simplify this.
- Relay_log_info->sql_thd renamed to Relay_log_info->sql_driver_thd to avoid wrong usage for merged code.
- Added is_part_of_group() to mark functions that are part of the next function. This replaces setting IN_STMT when events are executed.
- Added is_begin(), is_commit() and is_rollback() functions to Query_log_event to simplify code.
- If slave_skip_counter is set run things in single threaded mode. This simplifies code for skipping events.
- Updating state of relay log (IN_STMT and IN_TRANSACTION) is moved to one single function: update_state_of_relay_log()
We can't use OPTION_BEGIN to check for the state anymore as the sql_driver and sql execution threads may be different.
Clear IN_STMT and IN_TRANSACTION in init_relay_log_pos() and Relay_log_info::cleanup_context() to ensure the flags doesn't survive slave restarts
is_in_group() is now independent of state of executed transaction.
- Reset thd->transaction.all.modified_non_trans_table() if we did set it for single table row events.
This was mainly for keeping the flag as documented.
- Changed slave_open_temp_tables to uint32 to be able to use atomic operators on it.
- Relay_log_info::sleep_lock -> rpl_group_info::sleep_lock
- Relay_log_info::sleep_cond -> rpl_group_info::sleep_cond
- Changed some functions to take rpl_group_info instead of Relay_log_info to make them multi-slave safe and to simplify usage
- do_shall_skip()
- continue_group()
- sql_slave_killed()
- next_event()
- Simplifed arguments to io_salve_killed(), check_io_slave_killed() and sql_slave_killed(); No reason to supply THD as this is part of the given structure.
- set_thd_in_use_temporary_tables() removed as in_use is set on usage
- Added information to thd_proc_info() which thread is waiting for slave mutex to exit.
- In open_table() reuse code from find_temporary_table()
Other things:
- More DBUG statements
- Fixed the rpl_incident.test can be run with --debug
- More comments
- Disabled not used function rpl_connect_master()
mysql-test/suite/perfschema/r/all_instances.result:
Moved sleep_lock and sleep_cond to rpl_group_info
mysql-test/suite/rpl/r/rpl_incident.result:
Updated result
mysql-test/suite/rpl/t/rpl_incident-master.opt:
Not needed anymore
mysql-test/suite/rpl/t/rpl_incident.test:
Fixed that test can be run with --debug
sql/handler.cc:
More DBUG_PRINT
sql/log.cc:
More comments
sql/log_event.cc:
Added DBUG statements
do_shall_skip(), continue_group() now takes rpl_group_info param
Use is_begin(), is_commit() and is_rollback() functions instead of inspecting query string
We don't have set slaves temporary tables 'in_use' as this is now done when tables are opened.
Removed IN_STMT flag setting. This is now done in update_state_of_relay_log()
Use IN_TRANSACTION flag to test state of relay log.
In rows_event_stmt_cleanup() reset thd->transaction.all.modified_non_trans_table if we had set this before.
sql/log_event.h:
do_shall_skip(), continue_group() now takes rpl_group_info param
Added is_part_of_group() to mark events that are part of the next event. This replaces setting IN_STMT when events are executed.
Added is_begin(), is_commit() and is_rollback() functions to Query_log_event to simplify code.
sql/log_event_old.cc:
Removed IN_STMT flag setting. This is now done in update_state_of_relay_log()
do_shall_skip(), continue_group() now takes rpl_group_info param
sql/log_event_old.h:
Added is_part_of_group() to mark events that are part of the next event.
do_shall_skip(), continue_group() now takes rpl_group_info param
sql/mysqld.cc:
Changed slave_open_temp_tables to uint32 to be able to use atomic operators on it.
Relay_log_info::sleep_lock -> Rpl_group_info::sleep_lock
Relay_log_info::sleep_cond -> Rpl_group_info::sleep_cond
sql/mysqld.h:
Updated types and names
sql/rpl_gtid.cc:
More DBUG
sql/rpl_parallel.cc:
Updated TODO section
Set thd for event that is execution
Use new is_begin(), is_commit() and is_rollback() functions.
More comments
sql/rpl_rli.cc:
sql_thd -> sql_driver_thd
Relay_log_info::sleep_lock -> rpl_group_info::sleep_lock
Relay_log_info::sleep_cond -> rpl_group_info::sleep_cond
Clear IN_STMT and IN_TRANSACTION in init_relay_log_pos() and Relay_log_info::cleanup_context() to ensure the flags doesn't survive slave restarts.
Reset table->in_use for temporary tables as the table may have been used by another THD.
Use IN_TRANSACTION instead of OPTION_BEGIN to check state of relay log.
Removed IN_STMT flag setting. This is now done in update_state_of_relay_log()
sql/rpl_rli.h:
Changed relay log state flags to bit masks instead of bit positions (most other code we have uses bit masks)
Added IN_TRANSACTION to mark if we are in a BEGIN ... COMMIT section.
save_temporary_tables is now thread safe
Relay_log_info::sleep_lock -> rpl_group_info::sleep_lock
Relay_log_info::sleep_cond -> rpl_group_info::sleep_cond
Relay_log_info->sql_thd renamed to Relay_log_info->sql_driver_thd to avoid wrong usage for merged code
is_in_group() is now independent of state of executed transaction.
sql/slave.cc:
Simplifed arguments to io_salve_killed(), sql_slave_killed() and check_io_slave_killed(); No reason to supply THD as this is part of the given structure.
set_thd_in_use_temporary_tables() removed as in_use is set on usage in sql_base.cc
sql_thd -> sql_driver_thd
More DBUG
Added update_state_of_relay_log() which will calculate the IN_STMT and IN_TRANSACTION state of the relay log after the current element is executed.
If slave_skip_counter is set run things in single threaded mode.
Simplifed arguments to io_salve_killed(), check_io_slave_killed() and sql_slave_killed(); No reason to supply THD as this is part of the given structure.
Added information to thd_proc_info() which thread is waiting for slave mutex to exit.
Disabled not used function rpl_connect_master()
Updated argument to next_event()
sql/sql_base.cc:
Added mutex around usage of slave's temporary tables. The active list is always kept up to date in sql->rgi_slave->save_temporary_tables.
Clear thd->temporary_tables after query (safety)
More DBUG
When using temporary table, set table->in_use to current thd as the THD may be different for slave threads.
Some code is ifdef:ed with REMOVE_AFTER_MERGE_WITH_10 as the given code in 10.0 is not yet in this tree.
In open_table() reuse code from find_temporary_table()
sql/sql_binlog.cc:
rli->sql_thd -> rli->sql_driver_thd
Remove duplicate setting of rgi->rli
sql/sql_class.cc:
Added helper functions rgi_lock_temporary_tables() and rgi_unlock_temporary_tables()
Would have been nicer to have these inline, but there was no easy way to do that
sql/sql_class.h:
Added functions to protect slaves temporary tables
sql/sql_parse.cc:
Added DBUG_PRINT
sql/transaction.cc:
Added comment
The ignored events are not written to the relay log, but instead a fake
Rotate event is generated to handle update of position.
Extend this for Gtid so we similarly generate a fake Gtid_list event
to update the GTID position.
Also fix an unrelated test issue that got triggered by the added test cases.
Fix a bunch of issues found with locking, ordering, and non-thread-safe stuff
in Relay_log_info.
Now able to do a simple benchmark, showing 4.5 times speedup for applying a
binlog with 10000 REPLACE statements.
Fix some bugs around waiting for worker threads to end during SQL slave stop.
Free Log_event after parallel execution (still needs to be made thread-safe by
using rpl_group_info rather than rli).
Hook in the wait-for-prior-commit logic (not really tested yet).
Clean up some resource maintenance around rpl_group_info (may still be some
smaller issues there though).
Add a ToDo list at the top of rpl_parallel.cc
Implement START SLAVE UNTIL master_gtid_pos = "<GTID position>".
Add test cases, including a test showing how to use this to promote
a new master among a set of slaves.
Fix things so that a master can switch with MASTER_GTID_POS=AUTO to a slave
that was previously running with log_slave_updates=0, by looking into the
slave replication state on the master when the slave requests something not
present in the binlog.
Be a bit more strict about what position the slave can ask for, to avoid some
easy-to-hit misconfiguration errors.
Start over with seq_no counter when RESET MASTER.
- Fix that slave GTID state was updated from the wrong place in the code,
causing random crashing and other misery.
- Fix updates to mysql.rpl_slave_state to not go to binlog (this would cause
duplicate key errors on the slave and is generally the wrong thing to do).
