------------------------------------------------------------------------
r4399 | marko | 2009-03-12 09:38:05 +0200 (Thu, 12 Mar 2009) | 2 lines
branches/5.1: row_sel_get_clust_rec_for_mysql(): Store the cursor position
also for unlock_row(). (Bug #39320)
------------------------------------------------------------------------
r4400 | marko | 2009-03-12 10:06:44 +0200 (Thu, 12 Mar 2009) | 5 lines
branches/5.1: Fix a bug in multi-table semi-consistent reads.
Remember the acquired record locks per table handle (row_prebuilt_t)
rather than per transaction (trx_t), so that unlock_row should successfully
unlock all non-matching rows in multi-table operations.
This deficiency was found while investigating Bug #39320.
------------------------------------------------------------------------
These were submitted as rb://94 and rb://96 and approved by Heikki Tuuri.
* Remove old Innobase copyright lines from C source files
* Add a reference to the GPLv2 license as recommended by the lawyers
at Oracle Legal
[Step 27/28]
* Remove old Innobase copyright lines from C source files
* Add a reference to the GPLv2 license as recommended by the lawyers
at Oracle Legal
[Step 26/28]
while accessing table->locks or un_member.tab_lock.locks.
This is related to Issue #158. According to static analysis,
the added debug assertions should always hold.
lock_table_has_to_wait_in_queue(), lock_queue_iterator_reset(),
lock_queue_iterator_get_prev(), add_trx_relevant_locks_to_cache(),
fetch_data_into_cache(): Add ut_ad(mutex_own(&kernel_mutex)).
------------------------------------------------------------------------
r3911 | sunny | 2009-01-13 14:15:24 +0200 (Tue, 13 Jan 2009) | 13 lines
branches/5.1: Fix Bug#38187 Error 153 when creating savepoints
InnoDB previously treated savepoints as a stack e.g.,
SAVEPOINT a;
SAVEPOINT b;
SAVEPOINT c;
SAVEPOINT b; <- This would delete b and c.
This fix changes the behavior to:
SAVEPOINT a;
SAVEPOINT b;
SAVEPOINT c;
SAVEPOINT b; <- Does not delete savepoint c
------------------------------------------------------------------------
r3930 | marko | 2009-01-14 15:51:30 +0200 (Wed, 14 Jan 2009) | 4 lines
branches/5.1: dict_load_table(): If dict_load_indexes() fails,
invoke dict_table_remove_from_cache() instead of dict_mem_table_free(),
so that the data dictionary will not point to freed data.
(Bug #42075, Issue #153, rb://76 approved by Heikki Tuuri)
------------------------------------------------------------------------
satisfy some conditions when UNIV_DEBUG is defined.
HASH_SEARCH(): New parameter: ASSERTION. All users will pass an appropriate
ut_ad() or nothing.
dict_table_add_to_columns(): Assert that the table being added to the data
dictionary cache is not already being pointed to by the name_hash and
id_hash tables.
HASH_SEARCH_ALL(): New macro, for use in dict_table_add_to_columns().
dict_mem_table_free(): Set ut_d(table->cached = FALSE), so that we can
check ut_ad(table->cached) when traversing the hash tables, as in
HASH_SEARCH(name_hash, dict_sys->table_hash, ...) and
HASH_SEARCH(id_hash, dict_sys->table_id_hash, ...).
dict_table_get_low(), dict_table_get_on_id_low(): Assert
ut_ad(!table || table->cached).
fil_space_get_by_id(): Check ut_ad(space->magic_n == FIL_SPACE_MAGIC_N)
in HASH_SEARCH(hash, fil_system->spaces, ...).
fil_space_get_by_name(): Check ut_ad(space->magic_n == FIL_SPACE_MAGIC_N)
in HASH_SEARCH(name_hash, fil_system->name_hash, ...).
buf_buddy_block_free(): Check that the blocks are in valid state in
HASH_SEARCH(hash, buf_pool->zip_hash, ...).
buf_page_hash_get(): Check that the blocks are in valid state in
HASH_SEARCH(hash, buf_pool->page_hash, ...).
get_share(), free_share(): Check ut_ad(share->use_count > 0) in
HASH_SEARCH(table_name_hash, innobase_open_tables, ...).
This was posted as rb://75 for tracking down errors similar to Issue #153.
Merge 2929:3458 from branches/5.1 (resolving conflict in c3257,
note also that r3363 reverted r2933 so there are not changes in
mysql-test/innodb-autoinc.result with the current merge):
------------------------------------------------------------------------
r2933 | calvin | 2008-10-30 02:57:31 +0200 (Thu, 30 Oct 2008) | 10 lines
Changed paths:
M /branches/5.1/mysql-test/innodb-autoinc.result
branches/5.1: correct the result file innodb-autoinc.result
Change the followings:
auto_increment_increment
auto_increment_offset
to
auto-increment-increment
auto-increment-offset
------------------------------------------------------------------------
r2981 | marko | 2008-11-07 14:54:10 +0200 (Fri, 07 Nov 2008) | 5 lines
Changed paths:
M /branches/5.1/row/row0mysql.c
branches/5.0: row_mysql_store_col_in_innobase_format(): Correct a misleading
comment. In the UTF-8 encoding, ASCII takes 1 byte per character, while
the "latin1" character set (normally ISO-8859-1, but in MySQL it actually
refers to the Windows Code Page 1252 a.k.a. CP1252, WinLatin1)
takes 1 to 3 bytes (1 to 2 bytes for the ISO-8859-1 subset).
------------------------------------------------------------------------
r3114 | calvin | 2008-11-14 20:31:48 +0200 (Fri, 14 Nov 2008) | 8 lines
Changed paths:
M /branches/5.1/handler/ha_innodb.cc
branches/5.1: fix bug#40386: Not flushing query cache after truncate
ha_statistics.records can not be 0 unless the table is empty, set to
1 instead. The original problem of bug#29507 is fixed in the server.
Additional test was done with the fix of bug#29507 in the server.
Approved by: Heikki (on IM)
------------------------------------------------------------------------
r3257 | inaam | 2008-11-24 22:06:50 +0200 (Mon, 24 Nov 2008) | 13 lines
Changed paths:
M /branches/5.1/handler/ha_innodb.cc
M /branches/5.1/srv/srv0srv.c
M /branches/5.1/trx/trx0trx.c
branches/5.1 bug#40760
The config param innodb_thread_concurrency is dynamically set and is
read when a thread enters/exits innodb. If the value is changed between
the enter and exit time the behaviour becomes erratic.
The fix is not to use srv_thread_concurrency when exiting, instead use
the flag trx->declared_to_be_inside_innodb.
rb://57
Approved by: Marko
------------------------------------------------------------------------
r3363 | calvin | 2008-12-04 19:00:20 +0200 (Thu, 04 Dec 2008) | 13 lines
Changed paths:
M /branches/5.1/mysql-test/innodb-autoinc.result
branches/5.1: revert the changes in r2933
The changes in r2933 causes test failure on Linux.
More investigation is needed for Windows.
Change the followings in innodb-autoinc.result:
auto-increment-increment
auto-increment-offset
back to:
auto_increment_increment
auto_increment_offset
------------------------------------------------------------------------
r3412 | vasil | 2008-12-05 10:46:18 +0200 (Fri, 05 Dec 2008) | 7 lines
Changed paths:
M /branches/5.1/trx/trx0undo.c
branches/5.1:
Add the traditional 2 spaces after the timestamp so the message does
not look like:
070223 13:26:01InnoDB: Warning: canno....
------------------------------------------------------------------------
r3458 | vasil | 2008-12-09 11:21:08 +0200 (Tue, 09 Dec 2008) | 51 lines
Changed paths:
M /branches/5.1/mysql-test/innodb_bug34300.test
branches/5.1:
Merge a change from MySQL to fix the failing innodb_bug34300 mysql-test:
main.innodb_bug34300 [ fail ]
mysqltest: At line 11: query 'SET @@max_allowed_packet=16777216' failed: 1621: SESSION variable 'max_allowed_packet' is read-only. Use SET GLOBAL to assign the value
Aborting: main.innodb_bug34300 failed in default mode.
The changeset is this:
------------------------------------------------------------
revno: 2709.1.10
committer: Staale Smedseng <staale.smedseng@sun.com>
branch nick: b22891-51-bugteam
timestamp: Thu 2008-11-20 08:51:48 +0100
message:
A fix for Bug#22891 "session level max_allowed_packet can be
set but is ignored".
This patch makes @@session.max_allowed_packed and
@@session.net_buffer_length read-only as suggested in the bug
report. The user will have to use SET GLOBAL (and reconnect)
to alter the session values of these variables.
The error string ER_VARIABLE_IS_READONLY is introduced.
Tests are modified accordingly.
modified:
mysql-test/r/func_compress.result
mysql-test/r/max_allowed_packet_basic.result
mysql-test/r/max_allowed_packet_func.result
mysql-test/r/net_buffer_length_basic.result
mysql-test/r/packet.result
mysql-test/r/union.result
mysql-test/r/variables.result
mysql-test/t/func_compress.test
mysql-test/t/innodb_bug34300.test
mysql-test/t/max_allowed_packet_basic.test
mysql-test/t/max_allowed_packet_func.test
mysql-test/t/net_buffer_length_basic.test
mysql-test/t/packet.test
mysql-test/t/union.test
mysql-test/t/variables.test
sql/set_var.cc
sql/set_var.h
sql/share/errmsg.txt
------------------------------------------------------------
------------------------------------------------------------------------
Fix Mantis issue#103 mysql_addons.c depends on THD internals - please remove it
Use MySQL's thd_get_thread_id() instead of our own ib_thd_get_thread_id()
since MySQL implemented the former, see http://bugs.mysql.com/30930.
Approved by: Marko (https://svn.innodb.com/rb/r/40, rb://40)
an index or table. We have to skip this check when loading table definitions
from the data dictionary, because we could otherwise refuse to load old
tables (even uncompressed ones). This addresses Issue #119.
The first "row too large" check was implemented in MySQL 5.0.3
to address MySQL Bug #5682. In the InnoDB Plugin 1.0.2, a more
accurate check was implemented in innodb_strict_mode. We now
make the check unconditional.
dict_create_index_step(): Pass strict=TRUE to dict_index_add_to_cache().
trx_is_strict(), thd_is_strict(): Remove.
innodb-zip.test: Test in innodb_strict_mode=OFF.
innodb_bug36169.test: Ensure that none of the tables can be created.
rb://56 approved by Sunny Bains.
1. We add a vector of locks to trx_t. This array contains the autoinc
locks granted to a transaction. There is one per table.
2. We enforce releasing of these locks in the reverse order from the
one in which they are acquired. The assumption is that since the
AUTOINC locks are statement level locks. Nested statements introduced
by triggers are stacked it should hold.
There was some cleanup done to the vector code too by adding const and
some new functions. Rename dict_table_t::auto_inc_lock to autoinc_lock.
Fix Bug#26316 Triggers create duplicate entries on auto-increment columns
rb://22
trx_sys_file_format_max_upgrade(): Rename from
trx_sys_file_format_max_update(). Improve the documentation. Add a
const qualifier to the parameter "name". Replace the parameter
"flags" with "format_id", because this function should deal with file
format identifiers, not with table flags.
trx_sys_file_format_max_write(), trx_sys_file_format_max_set(): Add a
const qualifier to the parameter "name".
ha_innodb.cc: Correct the spelling in some comments: "side effect".
Remove redundant prototypes for some static callback functions.
innodb_file_format_name_update(), innodb_file_format_check_update():
Correct the function signature. Use appropriate pointer type conversions.
MYSQL_SYSVAR_STR(file_format), MYSQL_SYSVAR_STR(file_format_check):
Remove the type conversions from the callback function pointers. When
the function signatures match, no type conversion is needed. The type
conversions would only prevent compilation warnings for any mismatch.
Approved by Sunny in rb://25.
to the data dictionary records. This should fix Issue #83.
row_drop_table_for_mysql_no_commit(): Rename back to
row_drop_table_for_mysql(). Commit the transaction if the data
dictionary was not locked when the function was called. Otherwise,
neither commit the transaction nor unlock the data dictionary.
row_merge_drop_table(): Let row_drop_table_for_mysql() take care of
locking the data dictionary.
dict_create_or_check_foreign_constraint_tables(),
trx_rollback_active(), row_create_table_for_mysql(),
row_create_index_for_mysql(), row_table_add_foreign_constraints():
Explicitly commit the transaction, because row_drop_table_for_mysql()
would no longer commit it, given that the data dictionary will be
locked during the calls.
Approved by Sunny (over IM). rb://23
buf_block_dbg_add_level(block, level): Define as an empty macro when
UNIV_SYNC_DEBUG is not defined. Remove #ifdef UNIV_SYNC_DEBUG around
all invocations.
the maximum record size will never exceed the B-tree page size limit.
For uncompressed tables, there should always be enough space for two
records in an empty B-tree page. For compressed tables, there should
be enough space for storing two node pointer records or one data
record in an empty page in uncompressed format.
dict_build_table_def_step(): Remove the inaccurate check for table row
size.
dict_index_too_big_for_tree(): New function: check if the index
records would be too big for a B-tree page.
dict_index_add_to_cache(): Add the parameter "strict". Invoke
dict_index_too_big_for_tree() if it is set.
trx_is_strict(), thd_is_strict(): New functions, for determining if
innodb_strict_mode is enabled for the current transaction.
dict_create_index_step(): Pass the new parameter strict of
dict_index_add_to_cache() as trx_is_strict(trx). All other callers
pass it as FALSE.
innodb.test: Enable innodb_strict_mode before attempting to create a
table with a too big record size.
innodb-zip.test: Remove the test of inserting random data. Add tests
for checking that the maximum record lengths are enforced at table
creation time.
recovery, tolerate clustered index records whose externally stored
columns have not been written. This should remove the assertion failures
that were reported as Mantis issue#58, issue#62, issue#64.
trx_is_recv(): New function: TRUE if this transaction is rolling back
an incomplete transaction in crash recovery.
enum trx_rbmode: Rollback modes: no rollback, normal rollback, crash recovery.
btr_cur_pessimistic_delete(), btr_free_externally_stored_field(),
btr_rec_free_externally_stored_fields():
Replace the ibool parameter with enum trx_rbmode.
btr_free_externally_stored_field(): If field_ref is zero, return
but assert ut_a(rbmode == RB_RECOVERY). Unless InnoDB has crashed
while inserting a clustered index record, field_ref should not be zero.
btr_rec_free_updated_extern_fields(): Add the parameter enum trx_rbmode.
btr_cur_pessimistic_update(): Pass the rbmode parameter to
btr_rec_free_updated_extern_fields().
row_undo_ins(), row_undo_mod_upd_del_sec(): If row_build_index_entry()
fails, assert trx_is_recv() and skip this secondary index.
row_undo_mod_upd_del_sec(): Empty the heap at the end of each loop
iteration in order to conserve memory and to reduce the number of
low-level memory allocations.
Fixes a race in recovery where the recovery thread recovering a
PREPARED trx and the background rollback thread can both try
to free the trx after its status is set to COMMITTED_IN_MEMORY.
trx->is_recovered flag was introduced in r2040.
Reviewed by: Sunny
This fix makes two basic changes in blob handling:
(The bug was introduced in r2252)
1) The blob prefixes are no longer stored in the undo if
a) We are modifying a delete marked record and
b) The record was delete marked by an already committed trx.
2) When building old row version to check if one of these versions
can hold an implicit lock on the record we stop our probe if
a) The version is delete marked and
b) The delete marking is done by a trx which is different from
the current active trx on the record.
Reviewed by: Heikki
This is to fix an unintended side effect of file_format_check changes.
We were reading the trx system page (TRX_SYS_PAGE_NO) before starting
recovery and that resulted in redo logs not being applied to the page.
The fix is to force a reread by calling buf_pool_invalidate().
This, however, made necessary that any writes to page are deferred to
until after the redo log application.
Reviewed by: Sunny
Implement the system tablespace tagging described on the wiki:
https://svn.innodb.com/innobase/InnoDB_version_and_feature_compatibility
A brief description of the changes:
* The file format tag will be saved in the trx system page, starting at
(UNIV_PAGE_SIZE - 16) for 8 bytes.
* The configuration parameter innodb_file_format_check is introduced.
This variable can be set to on/off and any of the supported file
formats in the configuration file, but can only be set to any of
the supported file formats during runtime. The default is on.
* During table create/open, check the current file format against
the max in file_format_max. If the current file format is newer,
update file_format_max and tag the system tablespace with the
newer one in a normal mtr.
* During startup, write the tag to the error log and check it against
DICT_TF_FORMAT_MAX. Refuse to start with error, if
-- DICT_TF_FORMAT_MAX < the tag, and
-- innodb_file_format_check is ON
Print out a warning , if
-- DICT_TF_FORMAT_MAX < the tag, but
-- innodb_file_format_check is off
* The system tablespace tag is re-settable using:
set innodb_file_format_check = <file_format>
Approved by: Sunny
externally stored columns.
innodb-zip.test: Correct the test case. Without the fixes, the test
would fail, because the BLOB would be prepended with a 768-byte prefix
of the data.
row_upd_index_replace_new_col_vals_index_pos(),
row_upd_index_replace_new_col_vals(): Use only one "heap"
parameter that must be non-NULL. When fetching externally
stored columns, use upd_field_t::orig_len.
upd_get_field_by_field_no(): New accessor function, for retrieving
an field from an update vector by field_no.
row_upd_index_replace_new_col_val(): New function, for replacing the
value from an update vector. This used to be duplicated code in
row_upd_index_replace_new_col_vals_index_pos() and
row_upd_index_replace_new_col_vals().
variable innodb_file_format. Implement file format version stamping of
*.ibd files and SYS_TABLES.TYPE.
This change breaks introduces an incompatible change for for
compressed tables. We can do this, as we have not released yet.
innodb-zip.test: Add tests for stricter KEY_BLOCK_SIZE and ROW_FORMAT
checks.
DICT_TF_COMPRESSED_MASK, DICT_TF_COMPRESSED_SHIFT: Replace with
DICT_TF_ZSSIZE_MASK, DICT_TF_ZSSIZE_SHIFT.
DICT_TF_FORMAT_MASK, DICT_TF_FORMAT_SHIFT, DICT_TF_FORMAT_51,
DICT_TF_FORMAT_ZIP: File format version, stored in table->flags,
in the .ibd file header, and in SYS_TABLES.TYPE.
dict_create_sys_tables_tuple(): Write the table flags to SYS_TABLES.TYPE
if the format is at least DICT_TF_FORMAT_ZIP. For old formats
(DICT_TF_FORMAT_51), write DICT_TABLE_ORDINARY as the table type.
DB_TABLE_ZIP_NO_IBD: Remove the error code. The error handling is done
in ha_innodb.cc; as a failsafe measure, dict_build_table_def_step() will
silently clear the compression and format flags instead of returning this
error.
dict_mem_table_create(): Assert that no extra bits are set in the flags.
dict_sys_tables_get_zip_size(): Rename to dict_sys_tables_get_flags().
Check all flag bits, and return ULINT_UNDEFINED if the combination is
unsupported.
dict_boot(): Document the SYS_TABLES columns N_COLS and TYPE.
dict_table_get_format(), dict_table_set_format(),
dict_table_flags_to_zip_size(): New accessors to table->flags.
dtuple_convert_big_rec(): Introduce the auxiliary variables
local_len, local_prefix_len. Store a 768-byte prefix locally
if the file format is less than DICT_TF_FORMAT_ZIP.
dtuple_convert_back_big_rec(): Restore the columns.
srv_file_format: New variable: innodb_file_format.
fil_create_new_single_table_tablespace(): Replace the parameter zip_size
with table->flags.
fil_open_single_table_tablespace(): Replace the parameter zip_size_in_k
with table->flags. Check the flags.
fil_space_struct, fil_space_create(), fil_op_write_log():
Replace zip_size with flags.
fil_node_open_file(): Note a TODO item for InnoDB Hot Backup.
Check that the tablespace flags match.
fil_space_get_zip_size(): Rename to fil_space_get_flags(). Add a
wrapper for fil_space_get_zip_size().
fsp_header_get_flags(): New function.
fsp_header_init_fields(): Replace zip_size with flags.
FSP_SPACE_FLAGS: New name for the tablespace flags. This field used
to be called FSP_PAGE_ZIP_SIZE, or FSP_LOWEST_NO_WRITE. It has always
been written as 0 in MySQL/InnoDB versions 4.1 to 5.1.
MLOG_ZIP_FILE_CREATE: Rename to MLOG_FILE_CREATE2. Add a 32-bit
parameter for the tablespace flags.
ha_innobase::create(): Check the table attributes ROW_FORMAT and
KEY_BLOCK_SIZE. Issue errors if they are inappropriate, or warnings
if the inherited attributes (in ALTER TABLE) will be ignored.
PAGE_ZIP_MIN_SIZE_SHIFT: New constant: the 2-logarithm of PAGE_ZIP_MIN_SIZE.
lock_get_table(), locks_row_eq_lock(), buf_page_get_mutex(): Add return
after ut_error. On Windows, ut_error is not declared as "noreturn".
Add explicit type casts when assigning ulint to byte to get rid of
"possible loss of precision" warnings.
struct i_s_table_cache_struct: Declare rows_used, rows_allocd as ulint
instead of ullint. 32 bits should be enough.
fill_innodb_trx_from_cache(), i_s_zip_fill_low(): Cast 64-bit unsigned
integers to longlong when calling Field::store(longlong, bool is_unsigned).
Otherwise, the compiler would implicitly convert them to double and
invoke Field::store(double) instead.
recv_truncate_group(), recv_copy_group(), recv_calc_lsn_on_data_add():
Cast ib_uint64_t expressions to ulint to get rid of "possible loss of
precision" warnings. (There should not be any loss of precision in
these cases.)
log_close(), log_checkpoint_margin(): Declare some variables as ib_uint64_t
instead of ulint, so that there won't be any potential loss of precision.
mach_write_ull(): Cast the second argument of mach_write_to_4() to ulint.
OS_FILE_FROM_FD(): Cast the return value of _get_osfhandle() to HANDLE.
row_merge_dict_table_get_index(): Cast the parameter of mem_free() to (void*)
in order to get rid of the bogus MSVC warning C4090, which has been reported
as MSVC bug 101661:
<http://connect.microsoft.com/VisualStudio/feedback/ViewFeedback.aspx?FeedbackID=101661>
row_mysql_read_blob_ref(): To get rid of a bogus MSVC warning C4090,
drop a const qualifier.
suggested by Heikki, because it breaks row_vers_impl_x_locked_off_kernel();
see Mantis issue #10.
However, now that Heikki's fix has been removed, the code may break elsewhere
when it tries to dereference half-freed or completely freed externally
stored columns.
about undo_rec possibly being uninitialized. When trx_undo_get_undo_rec()
leaves undo_rec uninitialized, both functions will return DB_MISSING_HISTORY
without dereferencing undo_rec.
This closes Mantis issue #7.
in r2276. Now the following symbols will be exported when InnoDB is built
as a dynamic plugin:
* the virtual method pointer table of class ha_innodb
* the three variables that MySQL will reference when linking at runtime:
_mysql_plugin_declarations_
_mysql_plugin_interface_version_
_mysql_sizeof_struct_st_plugin_
Furthermore, the following symbols are weak globals, to allow us to access
the built-in InnoDB in the mysqld executable, in case it contains a statically
linked InnoDB:
builtin_innobase_plugin
innodb_hton_ptr
symbols. Use it for all definitions of non-static variables and functions.
lexyy.c, make_flex.sh: Declare yylex as UNIV_INTERN, not static. It is
referenced from pars0grm.c.
Actually, according to
nm .libs/ha_innodb.so|grep -w '[ABCE-TVXYZ]'
the following symbols are still global:
* The vtable for class ha_innodb
* pars0grm.c: The function yyparse() and the variables yychar, yylval, yynerrs
The required changes to the Bison-generated file pars0grm.c will be addressed
in a separate commit, which will add a script similar to make_flex.sh.
The class ha_innodb is renamed from class ha_innobase by a #define. Thus,
there will be no clash with the builtin InnoDB. However, there will be some
overhead for invoking virtual methods of class ha_innodb. Ideas for making
the vtable hidden are welcome. -fvisibility=hidden is not available in GCC 3.
btr_cur_pessimistic_update(): Note why the externally stored columns
of a record on a latched page cannot have been purged.
trx_undo_get_undo_rec(): Clarify that the stack of versions is locked
all the way down to the purge view.
trx_undo_prev_version_build(): Set *old_vers = NULL also when the record
could have been purged already. Add some clarifying comments.
creating indexes. Lock the user table inside the user transaction.
enum trx_dict_op: Remove TRX_OP_INDEX_MAY_WAIT.
ha_innobase::add_index(): Lock the user tables within prebuilt->trx.
Commit the data dictionary transaction before creating indexes.
ha_innobase::final_drop_index(): Lock the user table within prebuilt->trx.
to the undo log, also store the original length of the column, so that the
changes will be correctly undone in transaction rollback or when fetching
previous versions of the row.
innodb-zip.test: New file, for tests of the compression.
upd_field_t: Add orig_len, the original length of new_val.
btr_push_update_extern_fields(): Restore the original prefix of the column.
Add the parameter heap where memory will be allocated if necessary.
trx_undo_rec_get_col_val(): Add the output parameter orig_len.
trx_undo_page_report_modify_ext(): New function: Write an externally
stored column to the undo log. This is only called from
trx_undo_page_report_modify(), and this is the only caller of
trx_undo_page_fetch_ext().
trx_undo_update_rec_get_update(): Read the original length of the column
prefix to upd_field->orig_len.
row_build(), row_upd_index_replace_new_col_vals_index_pos(), and
row_upd_index_replace_new_col_vals() are safe.
btr_cur_optimistic_update(), btr_cur_pessimistic_update(): Note that
the B-tree page of the clustered index record is latched in mtr.
trx_undo_prev_version_build(): Add const qualifiers to index_rec
and rec. Note that the page of index_rec is latched in index_mtr.
row_vers_impl_x_locked_off_kernel(), row_vers_old_has_index_entry():
Note that the stack of versions is locked by mtr and thus it is
safe to call row_build().
Change the format of TRX_IDs in INFORMATION_SCHEMA tables from DEC to
HEX.
The current TRX_IDs are hard to remember and track down: 426355, 428466,
428566, etc.
In HEX:
* there are less "digits", the strings are shorter;
* since there are 16 instead of 10 "digits", the chance of having
repeating ones are smaller.
The above look like 68173, 689B2, 68A16 in HEX.
Discussed with: Ken
Approved by: Heikki (via IM)
btr_copy_blob_prefix(), btr_copy_externally_stored_field_prefix_low():
Document the return value as "number of bytes written", not "bytes written".
trx_undo_page_fetch_ext(): Explain the assertion ut_a(ext_len).
row_build_index_entry(): Explain the assertion ut_a(!ext).
Bugfix: Lock the MySQL mutex LOCK_thread_count before accessing
trx->mysql_query_str to avoid race conditions where MySQL sets it to
NULL after we have checked that it is not NULL and before we access it.
Approved by: Marko
enough prefixes of externally stored columns, so that purge will not have
to dereference any BLOB pointers, which may be invalid. This will not be
necessary for logging inserts, because inserts are no-ops in purge, and
the record will remain locked during transaction rollback.
TODO: in dict_build_table_def_step() or dict_build_index_def_step(),
prevent the creation of tables with too many columns for which a
prefix index is defined. This is because there is a size limit of undo
log records, and for each prefix-indexed column, the log must store
REC_MAX_INDEX_COL_LEN + BTR_EXTERN_FIELD_REF_SIZE bytes.
trx_undo_page_report_insert(): Assert that the index is clustered.
trx_undo_page_fetch_ext(): New function, for fetching the BLOB prefix
in trx_undo_page_report_modify().
trx_undo_page_report_modify(): Write long enough prefixes of the externally
stored columns to the undo log.
trx_undo_rec_get_partial_row(): Remove the parameter "ext". Assert that
the undo log contains long enough prefixes of the externally stored columns.
purge_node_t: Remove the field "ext".
* Change terminology:
wait lock -> requested lock
waited lock -> blocking lock
new: requesting transaction (the trx what owns the requested lock)
new: blocking transaction (the trx that owns the blocking lock)
* Add transaction ids to INFORMATION_SCHEMA.INNODB_LOCK_WAITS. This is
somewhat redundant because transaction ids can be found in INNODB_LOCKS
(which can be joined with INNODB_LOCK_WAITS) but would help users to
write shorter joins (one table less) in some cases where they want to
find which transaction is blocking which.
Suggested by: Ken
Approved by: Heikki
Only add indexed BLOBs to row_ext.
trx_undo_rec_get_partial_row(): Move the BLOB fetching to row_ext_create().
row_build(): Pass only those BLOBs to row_ext_create() that are referenced by
ordering columns of some indexes, similar to trx_undo_rec_get_partial_row().
row_ext_create(): Add the parameter "tuple". Move the implementation
from row0ext.ic to row0ext.c.
row_ext_lookup_ith(), row_ext_lookup(): Return a const pointer. Remove
the parameters "field" and "f_len". Make the row_ext_t* parameter const.
row_ext_t: Remove the field zip_size.
field_ref_zero[]: Declare in btr0types.h instead of btr0cur.h.
row_ext_lookup_low(): Rename to row_ext_cache_fill() and change the
signature.
