valgrind pointed to a buffer allocated by my_realloc which looked fishy
Replaced size with what was probably intended, added test case.
Now also fixed line after review comment
NULLable BIGINT and INT columns in comparison
Problem: a consequence of the fix for 43668.
Some Arg_comparator inner initialization missed,
that may lead to unpredictable (wrong) comparison
results.
Fix: always properly initialize Arg_comparator
before its usage.
Enable partition_innodb_plugin.test for BUG#32430
applied revisions: r6134, r6137, r6153
Detailed revision comments:
r6134 | marko | 2009-11-04 09:57:29 +0200 (Wed, 04 Nov 2009) | 5 lines
branches/zip: innobase_convert_identifier(): Convert table names with
explain_filename() to address Bug #32430: 'show innodb status'
causes errors Invalid (old?) table or database name in logs.
rb://134 approved by Sunny Bains
r6137 | marko | 2009-11-04 15:24:28 +0200 (Wed, 04 Nov 2009) | 1 line
branches/zip: dict_index_too_big_for_undo(): Correct a typo.
r6153 | vasil | 2009-11-10 15:33:22 +0200 (Tue, 10 Nov 2009) | 145 lines
branches/zip: Merge r6125:6152 from branches/5.1:
(everything except the last white-space change was skipped as it is already
in branches/zip)
------------------------------------------------------------------------
r6127 | vasil | 2009-10-30 11:18:25 +0200 (Fri, 30 Oct 2009) | 18 lines
Changed paths:
M /branches/5.1/Makefile.am
M /branches/5.1/mysql-test/innodb-autoinc.result
M /branches/5.1/mysql-test/innodb-autoinc.test
branches/5.1:
Backport c6121 from branches/zip:
------------------------------------------------------------------------
r6121 | sunny | 2009-10-30 01:42:11 +0200 (Fri, 30 Oct 2009) | 7 lines
Changed paths:
M /branches/zip/mysql-test/innodb-autoinc.result
branches/zip: This test has been problematic for sometime now. The underlying
bug is that the data dictionaries get out of sync. In the AUTOINC code we
try and apply salve to the symptoms. In the past MySQL made some unrelated
change and the dictionaries stopped getting out of sync and this test started
to fail. Now, it seems they have reverted that changed and the test is
passing again. I suspect this is not he last time that this test will change.
------------------------------------------------------------------------
------------------------------------------------------------------------
r6129 | vasil | 2009-10-30 17:14:22 +0200 (Fri, 30 Oct 2009) | 4 lines
Changed paths:
M /branches/5.1/Makefile.am
branches/5.1:
Revert a change to Makefile.am that sneaked unnoticed in c6127.
------------------------------------------------------------------------
r6136 | marko | 2009-11-04 12:28:10 +0200 (Wed, 04 Nov 2009) | 15 lines
Changed paths:
M /branches/5.1/handler/ha_innodb.cc
M /branches/5.1/include/ha_prototypes.h
M /branches/5.1/ut/ut0ut.c
branches/5.1: Port r6134 from branches/zip:
------------------------------------------------------------------------
r6134 | marko | 2009-11-04 07:57:29 +0000 (Wed, 04 Nov 2009) | 5 lines
branches/zip: innobase_convert_identifier(): Convert table names with
explain_filename() to address Bug #32430: 'show innodb status'
causes errors Invalid (old?) table or database name in logs.
rb://134 approved by Sunny Bains
------------------------------------------------------------------------
innobase_print_identifier(): Replace with innobase_convert_name().
innobase_convert_identifier(): New function, called by innobase_convert_name().
------------------------------------------------------------------------
r6149 | vasil | 2009-11-09 11:15:01 +0200 (Mon, 09 Nov 2009) | 5 lines
Changed paths:
M /branches/5.1/CMakeLists.txt
branches/5.1:
Followup to r5700: Adjust the changes so they are the same as in the BZR
repository.
------------------------------------------------------------------------
r6150 | vasil | 2009-11-09 11:43:31 +0200 (Mon, 09 Nov 2009) | 58 lines
Changed paths:
M /branches/5.1/handler/ha_innodb.cc
branches/5.1:
Merge a part of r2911.5.5 from MySQL:
(the other part of this was merged in c5700)
------------------------------------------------------------
revno: 2911.5.5
committer: Vladislav Vaintroub <vvaintroub@mysql.com>
branch nick: 5.1-innodb_plugin
timestamp: Wed 2009-06-10 10:59:49 +0200
message:
Backport WL#3653 to 5.1 to enable bundled innodb plugin.
Remove custom DLL loader code from innodb plugin code, use
symbols exported from mysqld.
removed:
storage/innodb_plugin/handler/handler0vars.h
storage/innodb_plugin/handler/win_delay_loader.cc
added:
storage/mysql_storage_engine.cmake
win/create_def_file.js
modified:
CMakeLists.txt
include/m_ctype.h
include/my_global.h
include/my_sys.h
include/mysql/plugin.h
libmysqld/CMakeLists.txt
mysql-test/mysql-test-run.pl
mysql-test/t/plugin.test
mysql-test/t/plugin_load-master.opt
mysys/charset.c
sql/CMakeLists.txt
sql/handler.h
sql/mysql_priv.h
sql/mysqld.cc
sql/sql_class.cc
sql/sql_class.h
sql/sql_list.h
sql/sql_profile.h
storage/Makefile.am
storage/archive/CMakeLists.txt
storage/blackhole/CMakeLists.txt
storage/csv/CMakeLists.txt
storage/example/CMakeLists.txt
storage/federated/CMakeLists.txt
storage/heap/CMakeLists.txt
storage/innobase/CMakeLists.txt
storage/innobase/handler/ha_innodb.cc
storage/innodb_plugin/CMakeLists.txt
storage/innodb_plugin/handler/ha_innodb.cc
storage/innodb_plugin/handler/handler0alter.cc
storage/innodb_plugin/handler/i_s.cc
storage/innodb_plugin/plug.in
storage/myisam/CMakeLists.txt
storage/myisammrg/CMakeLists.txt
win/Makefile.am
win/configure.js
------------------------------------------------------------------------
r6152 | vasil | 2009-11-10 15:30:20 +0200 (Tue, 10 Nov 2009) | 4 lines
Changed paths:
M /branches/5.1/handler/ha_innodb.cc
branches/5.1:
White space fixup.
------------------------------------------------------------------------
SET TRANSACTION ISOLATION LEVEL is used to temporarily set
the trans.iso.level for the next transaction. After the
transaction, the iso.level is (re-)set to value of the
session variable 'tx_isolation'.
The bug is caused by setting the thd->variables.tx_isolation
field to the value of the session variable upon each
statement commit. It should only be set at the end of the
full transaction.
The fix has been to remove the setting of the variable in
ha_autocommit_or_rollback if we're in a transaction, as it
will be correctly set in either ha_rollback or
ha_commit_one_phase.
If, on the other hand, we're in autocommit mode, tx_isolation
will be explicitly set here.
1. BUG#47720 - REPLACE INTO Autoincrement column with negative values.
Detailed revision comments:
r6235 | sunny | 2009-11-26 01:14:42 +0200 (Thu, 26 Nov 2009) | 9 lines
branches/5.1: Fix Bug#47720 - REPLACE INTO Autoincrement column with negative values.
This bug is similiar to the negative autoinc filter patch from earlier,
with the additional handling of filtering out the negative column values
set explicitly by the user.
rb://184
Approved by Heikki.
1. BUG#49032 - auto_increment field does not initialize to last value
in InnoDB Storage Engine
2. Fix whitespace issues and fix tests and make read float/double arg const
Detailed revision comments:
r6231 | sunny | 2009-11-25 10:26:27 +0200 (Wed, 25 Nov 2009) | 7 lines
branches/5.1: Fix BUG#49032 - auto_increment field does not initialize to last value in InnoDB Storage Engine.
We use the appropriate function to read the column value for non-integer
autoinc column types, namely float and double.
rb://208. Approved by Marko.
r6232 | sunny | 2009-11-25 10:27:39 +0200 (Wed, 25 Nov 2009) | 2 lines
branches/5.1: This is an interim fix, fix white space errors.
r6233 | sunny | 2009-11-25 10:28:35 +0200 (Wed, 25 Nov 2009) | 2 lines
branches/5.1: This is an interim fix, fix tests and make read float/double arg const.
r6234 | sunny | 2009-11-25 10:29:03 +0200 (Wed, 25 Nov 2009) | 2 lines
branches/5.1: This is an interim fix, fix whitepsace issues.
1. BUG#48482 - innodb-autoinc.test fails with results difference
2. enable the disabled test
Detailed revision comments:
r6230 | sunny | 2009-11-24 23:52:43 +0200 (Tue, 24 Nov 2009) | 3 lines
branches/5.1: Fix autoinc failing test results.
(this should be skipped when merging 5.1 into zip)
Fix for failure on windows PB2 because of the result content mismatch.
In windows additional information about TCP port was causing failures.
Added to regex.
for each record'
There was an error in an internal structure in the range
optimizer (SEL_ARG). Bad design causes parts of a data
structure not to be initialized when it is in a certain
state. All client code must check that this state is not
present before trying to access the structure's data. Fixed
by
- Checking the state before trying to access data (in
several places, most of which not covered by test case.)
- Copying the keypart id when cloning SEL_ARGs
BUG#46000 - using index called GEN_CLUST_INDEX crashes server
Detailed revision comments:
r6180 | jyang | 2009-11-17 10:54:57 +0200 (Tue, 17 Nov 2009) | 7 lines
branches/5.0: Merge/Port fix for bug #46000 from branches/5.1
-r5895 to branches/5.0. Disallow creating index with the
name of "GEN_CLUST_INDEX" which is reserved for the default
system primary index. Minor adjusts on table name screening
format for added tests.
BUG#47777 - innodb dies with spatial pk: Failing assertion: buf <= original_buf + buf_len
Detailed revision comments:
r6178 | jyang | 2009-11-17 08:52:11 +0200 (Tue, 17 Nov 2009) | 6 lines
branches/5.0: Merge fix for bug #47777 from branches/5.1 -r6045
to bracnches/5.0. Treat the Geometry data same as Binary BLOB
in ha_innobase::store_key_val_for_row(), since the Geometry
data is stored as Binary BLOB in Innodb.
mysql client displays wrong character-set of server. When a user changes the
charset of a server, mysql client 'status' command displays wrong charset but
the command "SHOW VARIABLES LIKE "%charset%" displayed correct charset results.
The problem is only with the mysql client's 'status' command output.
In mysql client, the method mysql_store_lazy_result() returns 0 for
success and non-zero for failure. The method com_status() was using this method
wrongly. Fixed all such instances according to return value of the method
mysql_store_lazy_result().
The problem is that the server could crash when attempting
to access a non-conformant proc system table. One such case
was a crash when invoking stored procedure related statements
on a 5.1 server with a proc system table in the 5.0 format.
The solution is to validate the proc system table format
before attempts to access it are made. If the table is not
in the format that the server expects, a message is written
to the error log and the statement that caused the table to
be accessed fails.
Bug #48370 Absolutely wrong calculations with GROUP BY and
decimal fields when using IF
Added the test cases in the above two bugs for regression
testing.
Added additional tests that demonstrate a incomplete fix.
Added a new factory method for Field_new_decimal to
create a field from an (decimal returning) Item.
In the new method made sure that all the precision and
length variables are capped in a proper way.
This is required because Item's can have larger precision
than the decimal fields and thus need to be capped when
creating a field based on an Item type.
Fixed the wrong typecast to Item_decimal.
When merging ranges during calculation of the result of OR
to two range sets the current range may be obsoleted by the
resulting merged range.
The first overlapping range can be obsoleted as well.
Fixed by moving the pointer to the first overlapping range to the
pointer of the resulting union range.
Added few comments at key places in key_or().
