START SLAVE UNTIL MASTER ... specifies only SQL thread to stop.
rpl_slave_skip erronously deployed waiting for stop of both threads.
Corrected with deploying the correct macro.
Notice, earlier a similar bug@47749 was fixed in mysql-trunk.
The test failed due to Bug #29790.
However, logics of the failing part does not need I_S selecting.
Fixing to remove the non-deterministic I_S selecting as redundant
from a part of the test dealing with BUG@22864.
removed in MySQL 6.0
CREATE TABLE... TYPE= returns the warning "The syntax
'TYPE=storage_engine' is deprecated and will be removed in
MySQL 6.0. Please use 'ENGINE=storage_engine' instead"
This syntax is deprecated already from version 5.4.4, so
the message has been changed.
In addition, the deprecation macro was changed to reflect
the ServerPT decision not to include version number in the
warning message.
A number of test result files have been changed as a
consequence of the change in the deprecation macro.
into slow log
While processing a statement, down the mysql_parse execution
stack, the thd->enable_slow_log can be assigned to
opt_log_slow_admin_statements, depending whether one is executing
administrative statements, such as ALTER TABLE, OPTIMIZE,
ANALYZE, etc, or not. This can have an impact on slow logging for
statements that are executed after an administrative statement
execution is completed.
When executing statements directly from the user this is fine
because, the thd->enable_slow_log is reset right at the beginning
of the dispatch_command function, ie, everytime a new statement
is set is set to execute.
On the other hand, for slave SQL thread (sql_thd) the story is a
bit different. When in SBR the sql_thd applies statements by
calling mysql_parse. Right after, it calls log_slow_statement
function to log them if they take too long. Calling mysql_parse
directly is fine, but also means that dispatch_command function
is bypassed. As a consequence, thd->enable_slow_log does not get
a chance to be reset before the next statement to be executed by
the sql_thd. If the statement just executed by the sql_thd was an
administrative statement and logging of admin statements was
disabled, this means that sql_thd->enable_slow_log will be set to
0 (disabled) from that moment on. End result: sql_thd stops
logging slow statements.
We fix this by resetting the value of sql_thd->enable_slow_log to
the value of opt_log_slow_slave_statements right after
log_slow_stement is called by the sql_thd.
To 5.x Release
Notes
=====
This is a backport of BUG#23300 into 5.1 GA.
Original cset revid (in betony):
luis.soares@sun.com-20090929140901-s4kjtl3iiyy4ls2h
Description
===========
When using replication, the slave will not log any slow query
logs queries replicated from the master, even if the
option "--log-slow-slave-statements" is set and these take more
than "log_query_time" to execute.
In order to log slow queries in replicated thread one needs to
set the --log-slow-slave-statements, so that the SQL thread is
initialized with the correct switch. Although setting this flag
correctly configures the slave thread option to log slow queries,
there is an issue with the condition that is used to check
whether to log the slow query or not. When replaying binlog
events the statement contains the SET TIMESTAMP clause which will
force the slow logging condition check to fail. Consequently, the
slow query logging will not take place.
This patch addresses this issue by removing the second condition
from the log_slow_statements as it prevents slow queries to be
binlogged and seems to be deprecated.
Bug #49984 Test 'rpl_loaddata_symlink' fails with "Could not find target log"
Sometimes the symbolic link is available on Windows if
you have some Unix (emulation) layer installed like
Cygwin, MKS or other. But symbolic link is not always
available. It depends on versions, file volume and
system environment of Windows. And the symbolic link
is not typically used on Windows, at least not in the
degree and style they are used on Unix. We can not
change the test case to do without symbolic link,
because the test case is used to test that if the
symbolic link works fine.
To fix the problem, skip the test on windows.
Original revision:
------------------------------------------------------------
revision-id: li-bing.song@sun.com-20100130124925-o6sfex42b6noyc6x
parent: joro@sun.com-20100129145427-0n79l9hnk0q43ajk
committer: <Li-Bing.Song@sun.com>
branch nick: mysql-5.1-bugteam
timestamp: Sat 2010-01-30 20:49:25 +0800
message:
Bug #48321 CURRENT_USER() incorrectly replicated for DROP/RENAME USER;
REVOKE/GRANT; ALTER EVENT.
The following statements support the CURRENT_USER() where a user is needed.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENT
but, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, All above statements are rewritten when they are binlogged.
The CURRENT_USER() is expanded to the real user's name and host.
------------------------------------------------------------
REVOKE/GRANT; ALTER EVENT.
The following statements support the CURRENT_USER() where a user is needed.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENT
but, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, All above statements are rewritten when they are binlogged.
The CURRENT_USER() is expanded to the real user's name and host.
The 'rpl_get_master_version_and_clock' test verifies if the slave I/O
thread tries to reconnect to master when it tries to get the values of
the UNIX_TIMESTAMP, SERVER_ID from master under network disconnection.
So the master server is restarted for making the transient network
disconnection, during the period the COM_REGISTER_SLAVE failures are
produced in server log file when the slave I/O thread tries to
register on master.
To fix the problem, suppress COM_REGISTER_SLAVE failures in server log
file by mtr suppression, because they are expected.
In RBR, DDL statement will change binlog format to non row-based
format before it is binlogged, but the binlog format was not be
restored, and then manipulating a temporary table can not reset binlog
format to row-based format rightly. So that the manipulated statement
is binlogged with statement-based format.
To fix the problem, restore the state of binlog format after the DDL
statement is binlogged.
cant find record
Some engines return data for the record. Despite the fact that
the null bit is set for some fields, their old value may still in
the row. This can happen when unpacking an AI from the binlog on
top of a previous record in which a field is set to NULL, which
previously contained a value. Ultimately, this may cause the
comparison of records to fail when the slave is doing an index or
range scan.
We fix this by deploying a call to reset() for each field that is
set to null while unpacking a row from the binary log.
Furthermore, we also add mixed mode test case to cover the
scenario where updating and setting a field to null through a
Query event and later searching it through a rows event will
succeed.
Finally, we also change the reset() method, from Field_bit class,
so that it takes into account bits stored among the null bits and
not only the ones stored in the record.
It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables in statement and mixed modes.
In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.
In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.
So, in this patch we introduce the option
- "--binlog-direct-non-transactional-updates" that can be used to bypass
the current behavior in order to write directly to binary log statements
that change non-transactional tables.
'CREATE TABLE IF NOT EXISTS ... SELECT' statement were causing 'CREATE
TEMPORARY TABLE ...' to be written to the binary log in row-based
mode (a.k.a. RBR), when there was a temporary table with the same name.
Because the 'CREATE TABLE ... SELECT' statement was executed as
'INSERT ... SELECT' into the temporary table. Since in RBR mode no
other statements related to temporary tables are written into binary log,
this sometimes broke replication.
This patch changes behavior of 'CREATE TABLE [IF NOT EXISTS] ... SELECT ...'.
it ignores existence of temporary table with the
same name as table being created and is interpreted
as attempt to create/insert into base table. This makes behavior of
'CREATE TABLE [IF NOT EXISTS] ... SELECT' consistent with
how ordinary 'CREATE TABLE' and 'CREATE TABLE ... LIKE' behave.
BUG#49481: RBR: MyISAM and bit fields may cause slave to stop on delete:
cant find record
BUG#49482: RBR: Replication may break on deletes when MyISAM tables +
char field are used
When using MyISAM tables, despite the fact that the null bit is
set for some fields, their old value is still in the row. This
can cause the comparison of records to fail when the slave is
doing an index or range scan.
We fix this by avoiding memcmp for MyISAM tables when comparing
records. Additionally, when comparing field by field, we first
check if both fields are not null and if so, then we compare
them. If just one field is null we return failure immediately. If
both fields are null, we move on to the next field.
Problem: When RAND() is binlogged in statement mode, the seed is
binlogged too, so the replication slave generates the same
sequence of random numbers. This makes replication work in many
cases, but not in all cases: the order of rows is not guaranteed
for, e.g., UPDATE or INSERT...SELECT statements, so the row data
will be different if master and slave retrieve the rows in
different orders.
Fix: Mark RAND() as unsafe. It will generate a warning if
binlog_format=STATEMENT and switch to row-logging if
binlog_format=ROW.
Manually deleteing one or more entries from 'master-bin.index', will
cause master infinitely loop to send one binlog file.
When starting a dump session, master opens index file and search the binlog file
which is being requested by the slave. The position of the binlog file in the
index file is recorded. it will be used to find the next binlog file when current
binlog file has dumped completely. As only the position is used, it may
not get the correct file if some entries has been removed manually from the index file.
the master will reopen the current binlog file which has been dump completely
and redump it if it can not get the next binlog file's name from index file.
It obviously is a logical error.
Even though it is allowed to manually change index file,
but it is not recommended. so after this patch, master
sends a fatal error to slave and close the dump session if a new binlog file
has been generated and master can not get it from the index file.
For tables with metadata sizes ranging from 251 to 255 the size
of the event data (m_data_size) was being improperly calculated
in the Table_map_log_event constructor. This was due to the fact
that when writing the Table_map_log_event body (in
Table_map_log_event::write_data_body) a call to net_store_length
is made for packing the m_field_metadata_size. It happens that
net_store_length uses *one* byte for storing
m_field_metadata_size when it is smaller than 251 but *three*
bytes when it exceeds that value. BUG 42749 had already
pinpointed and fix this fact, but the fix was incomplete, as the
calculation in the Table_map_log_event constructor considers 255
instead of 251 as the threshold to increment m_data_size by
three. Thence, the window for having a mismatch between the
number of bytes written and the number of bytes accounted in the
event length (m_data_size) was left open for
m_field_metadata_size values between 251 and 255.
We fix this by changing the condition in the Table_map_log_event
constructor to match the one in the net_store_length, ie,
increment one byte if m_field_metadata_size < 251 and three if it
exceeds this value.
In statement-based or mixed-mode replication, use DROP TEMPORARY TABLE
to drop multiple tables causes different errors on master and slave,
when one or more of these tables do not exist. Because when executed
on slave, it would automatically add IF EXISTS to the query to ignore
all ER_BAD_TABLE_ERROR errors.
To fix the problem, do not add IF EXISTS when executing DROP TEMPORARY
TABLE on the slave, and clear the ER_BAD_TABLE_ERROR error after
execution if the query does not expect any errors.
When the $diff_statement variable for diff_master_slave.inc was
put in multiple lines, the rear part of the statement would be
missing when being executed on Windows systems.
Fixed the problem by always putting the value for $diff_statement
in one line.
The bug is caused by a race condition between the
INSERT DELAYED thread and the client thread's FLUSH TABLE. The
FLUSH TABLE does not guarantee (as is (wrongly) suggested in the
test case) that the INSERT DELAYED is ever executed. The
execution of the test case will thus not be deterministic.
The fix has been to do a deterministic verification that both
threads are complete by checking the content of the table.
This test case tests a circular replication of four hosts.
A--->B--->C--->D--->A
The replicate is slow and needs more time to replicate all data in the circle.
The time it spends to replicate, sometimes, is longer than the time that
wait_condition.inc spends to wait that all data has been replicated. This
cause sporadical failure of this test case.
This patch uses sync_slave_with_master to ensure that all data can be replicated
successfully in the circle.
'LOAD DATA CONCURRENT [LOCAL] INFILE ...' statment only is binlogged as
'LOAD DATA [LOCAL] INFILE ...' in SBR and MBR. As a result, if replication is on,
queries on slaves will be blocked by the replication SQL thread.
This patch write code to write 'CONCURRENT' into the log event if 'CONCURRENT' option
is in the original statement in SBR and MBR.
{PROCEDURE|FUNCTION} FROM ...'
The master would hit an assertion when binary log was
active. This was due to the fact that the thread's diagnostics
area was being cleared before writing to the binlog,
independently of mysql_routine_grant returning an error or
not. When mysql_routine_grant was to return an error, the return
value and the diagnostics area contents would
mismatch. Consequently, neither my_ok would be called nor an
error would be signaled in the diagnostics area, eventually
triggering the assertion in net_end_statement.
We fix this by not clearing the diagnostics area at binlogging
time.
escaped field names
When in mixed or statement mode, the master logs LOAD DATA
queries by resorting to an Execute_load_query_log_event. This
event does not contain the original query, but a rewritten
version of it, which includes the table field names. However, the
rewrite does not escape the field names. If these names match a
reserved keyword, then the slave will stop with a syntax error
when executing the event.
We fix this by escaping the fields names as it happens already
for the table name.
The 'slave_patternload_file' is assigned to the real path of the load data file
when initializing the object of Relay_log_info. But the path of the load data
file is not formatted to real path when executing event from relay log. So the
error will be encountered if the path of the load data file is a symbolic link.
Actually the global 'opt_secure_file_priv' is not formatted to real path when
loading data from file. So the same thing will happen too.
To fix these errors, the path of the load data file should be formatted to
real path when executing event from relay log. And the 'opt_secure_file_priv'
should be formatted to real path when loading data infile.
