MariaDB-backup needs to check for SLAVE MONITOR as that is
what is returned by SHOW GRANTS.
Update test to ensure that warnings about missing privileges
do not occur when the backup is successful.
Reviewer: Andrew Hutchings
Thanks Eugene for reporting the issue.
The problem was two fold:
- REPAIR TABLE t1 USE_FRM did not work for transactional
Aria tables (Table was thought to be repaired, which it was not) which
caused issues in later usage of the table.
- When swapping tmp_data file to data file, sort_info files where not
updated. This caused problems if there was several unique keys and
there was a duplicate for the second key.
safety first - tell mariadb client not to execute dangerous
cli commands, they cannot be present in the dump anyway.
wrapping the command in /*!999999 ..... */ guarantees that
if a non-mariadb-cli client loads the dump and sends it to the
server - the server will ignore the command it doesn't understand
on disable_indexes(HA_KEY_SWITCH_NONUNIQ_SAVE) the engine does
not know that the long unique is logically unique, because on the
engine level it is not. And the engine disables it,
Change the disable_indexes/enable_indexes API. Instead of the enum
mode, send a key_map of indexes that should be enabled. This way the
server will decide what is unique, not the engine.
This commit fixes sporadic failures in galera_3nodes_sr.GCF-336
test. The following changes have been made here:
1) A small addition to the test itself which should make
it more deterministic by waiting for non-primary state
before COMMIT;
2) More careful handling of the wsrep_ready variable in
the server code (it should always be protected with mutex).
No additional tests are required.
the test waits for the event to get stuck on MASTER_DELAY,
but on a slow/overloaded slave the event might pass MASTER_DELAY
before the test starts waiting.
Wait for the event to get stuck on the LOCK TABLES (after MASTER_DELAY),
the event cannot avoid that,
Problem:
========
- Currently mariabackup have to reread the pages in case they are
modified by server concurrently. But while reading the undo
tablespace, mariabackup failed to do reread the page in case of
error.
Fix:
===
Mariabackup --backup functionality should have retry logic
while reading the undo tablespaces.
(returns NULL) and for Date/DateTime returns "INTEGER"
Analysis:
When the first character of json is scanned it is number. Based on that
integer is returned.
Fix:
Scan rest of the json before returning the final result to ensure json is
valid in the first place in order to have a valid type.
Problem:
========
- InnoDB wrongly calulates the record size in
btr_node_ptr_max_size() when prefix index of
the column has to be stored externally.
Fix:
====
- InnoDB should add the maximum field size to
record size when the field is a fixed length one.
Regexp_processor_pcre::fix_owner() called Regexp_processor_pcre::compile(),
which could fail on the regex syntax error in the pattern and put
an error into the diagnostics area. However, the callers:
- Item_func_regex::fix_length_and_dec()
- Item_func_regexp_instr::fix_length_and_dec()
still returned "false" in such cases, which made the code
crash later inside Diagnostics_area::set_ok_status().
Fix:
- Change the return type of fix_onwer() from "void" to "bool"
and return "true" whenever an error is put to the DA
(e.g. on the syntax error in the pattern).
- Fixing fix_length_and_dec() of the mentioned Item_func_xxx
classes to return "true" if fix_onwer() returned "true".
Replicated events have time associated with them from originating
node which will be used for commit timestamp. Associated time can
be set in past before event is even applied.
For WSREP replication we don't need to use time information from
event.
Addressed review comments:
Jan Lindström <jan.lindstrom@galeracluster.com>
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Tests using MW-369.inc sometimes hanged after
signaling two debug sync points inside a Galera
library. Replaced Galera library sync point
with server code sync point when possible and
added more wait_conditions to make sure we are
in correct state.
Tests effected: MW-369, MW-402, MDEV-27276, and
mysql-wsrep#332.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
This commit contains a fix for the code that extracts and parses
the CN (common name, domain name) record from certificates using
the openssl utility. This code is also made common to the rsync
and mariabackup scripts. There is also some systematization of
the use of 'printf' and 'echo' builtins/utilities.
Based on logs we might start SST before donor has reached
Primary state. Because this test shutdowns all nodes we
need to make sure when we start nodes that previous nodes
have reached Primary state and joined the cluster.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
The test could fail with a duplicate key error because switching to non-GTID
mode could start at the wrong old-style position. The position could be
wrong when the previous GTID connect was stopped before receiving the fake
GTID list event which gives the old-style position corresponding to the GTID
connected position.
Work-around by injecting an extra event and syncing the slave before
switching to non-GTID mode.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
MDL wait consists of short 1 second waits (this is not configurable)
repeated until lock_wait_timeout is reached. The stage is changed
to Waiting and back every second. To have predictable result in the
test the query should filter all sequences of X, "Waiting for MDL", X,
leaving just X.
Problem:
========
mariabackup --prepare fails to write the pages in encrypted format.
This issue happens only for default encrypted table when
innodb_encrypt_tables variable is enabled.
Fix:
====
backup process should write the value of innodb_encrypt_tables
variable in configuration file. prepare should enable the
variable based on configuration file.
The root cause of the failure is a bug in the Linux network stack:
https://lore.kernel.org/netdev/87sf0ldk41.fsf@urd.knielsen-hq.org/T/#u
If the slave does a connect(2) at the exact same time that kill -9 of the
master process closes the listening socket, the FIN or RST packet is lost in
the kernel, and the slave ends up timing out waiting for the initial
communication from the server. This timeout defaults to
--slave-net-timeout=120, which causes include/master_gtid_wait.inc to time
out first and fail the test.
Work-around this problem by reducing the --slave-net-timeout for this test
case. If this problem turns up in other tests, we can consider reducing the
default value for all tests.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
If replicating an event in ROW format, and InnoDB detects a deadlock
while searching for a row, the row event will error and rollback in
InnoDB and indicate that the binlog cache also needs to be cleared,
i.e. by marking thd->transaction_rollback_request. In the normal
case, this will trigger an error in Rows_log_event::do_apply_event()
and cause a rollback. During the Rows_log_event::do_apply_event()
cleanup of a successful event application, there is a DBUG_ASSERT in
log_event_server.cc::rows_event_stmt_cleanup(), which sets the
expectation that thd->transaction_rollback_request cannot be set
because the general rollback (i.e. not the InnoDB rollback) should
have happened already. However, if the replica is configured to skip
deadlock errors, the rows event logic will clear the error and
continue on, as if no error happened. This results in
thd->transaction_rollback_request being set while in
rows_event_stmt_cleanup(), thereby triggering the assertion.
This patch fixes this in the following ways:
1) The assertion is invalid, and thereby removed.
2) The rollback case is forced in rows_event_stmt_cleanup() if
transaction_rollback_request is set.
Note the differing behavior between transactions which are skipped
due to deadlock errors and other errors. When a transaction is
skipped due to an ignored deadlock error, the entire transaction is
rolled back and skipped (though note MDEV-33930 which allows
statements in the same transaction after the deadlock-inducing one
to commit). When a transaction is skipped due to ignoring a
different error, only the erroring statements are rolled-back and
skipped - the rest of the transaction will execute as normal. The
effect of this can be seen in the test results. The added test case
to rpl_skip_error.test shows that only statements which are ignored
due to non-deadlock errors are ignored in larger transactions. A
diff between rpl_temporary_error2_skip_all.result and
rpl_temporary_error2.result shows that all statements in the errored
transaction are rolled back (diff pasted below):
: diff rpl_temporary_error2.result rpl_temporary_error2_skip_all.result
49c49
< 2 1
---
> 2 NULL
51c51
< 4 1
---
> 4 NULL
53c53
< * There will be two rows in t2 due to the retry.
---
> * There will be one row in t2 because the ignored deadlock does not retry.
57d56
< 1
59c58
< 1
---
> 0
Reviewed By:
============
Andrei Elkin <andrei.elkin@mariadb.com>
On Windows systems, occurrences of ERROR_SHARING_VIOLATION due to
conflicting share modes between processes accessing the same file can
result in CreateFile failures.
mysys' my_open() already incorporates a workaround by implementing
wait/retry logic on Windows.
But this does not help if files are opened using shell redirection like
mysqltest traditionally did it, i.e via
--echo exec "some text" > output_file
In such cases, it is cmd.exe, that opens the output_file, and it
won't do any sharing-violation retries.
This commit addresses the issue by introducing a new built-in command,
'write_line', in mysqltest. This new command serves as a brief alternative
to 'write_file', with a single line output, that also resolves variables
like "exec" would.
Internally, this command will use my_open(), and therefore retry-on-error
logic.
Hopefully this will eliminate the very sporadic "can't open file because
it is used by another process" error on CI.
Issue:
------
The actual order of acquisition of the IBUF pessimistic insert mutex
(SYNC_IBUF_PESS_INSERT_MUTEX) and IBUF header page latch
(SYNC_IBUF_HEADER) w.r.t space latch (SYNC_FSP) differs from the order
defined in sync0types.h. It was not discovered earlier as the path to
ibuf_remove_free_page was not covered by the mtr test. Ideal order and
one defined in sync0types.h is as follows.
SYNC_IBUF_HEADER -> SYNC_IBUF_PESS_INSERT_MUTEX -> SYNC_FSP
In ibuf_remove_free_page, we acquire space latch earlier and we have
the order as follows resulting in the assert with innodb_sync_debug=on.
SYNC_FSP -> SYNC_IBUF_HEADER -> SYNC_IBUF_PESS_INSERT_MUTEX
Fix:
---
We do maintain this order in other places and there doesn't seem to be
any real issue here. To reduce impact in GA versions, we avoid doing
extensive changes in mutex ordering to match the current
SYNC_IBUF_PESS_INSERT_MUTEX order. Instead we relax the ordering check
for IBUF pessimistic insert mutex using SYNC_NO_ORDER_CHECK.
Test was waiting INSERT-clause to make rollback but
wait_condition was too tight. State could be
Freeing items or Rollback. Fixed wait_condition
to expect one of them.
create_partitioning_metadata() should only mark transaction r/w
if it actually did anything (that is, the table is partitioned).
otherwise it's a no-op, called even for temporary tables and
it shouldn't do anything at all
In the case if some unique key fields are nullable, there can be
several records with the same key fields in unique index with at least
one key field equal to NULL, as NULL != NULL.
When transaction is resumed after waiting on the record with at least one
key field equal to NULL, and stored in persistent cursor record is
deleted, persistent cursor can be restored to the record with all key
fields equal to the stored ones, but with at least one field equal to
NULL. And such record is wrongly treated as a record with the same unique
key as stored in persistent cursor record one, what is wrong as
NULL != NULL.
The fix is to check if at least one unique field is NULL in restored
persistent cursor position, and, if so, then don't treat the record as
one with the same unique key as in the stored record key.
dict_index_t::nulls_equal was removed, as it was initially developed for
never existed in MariaDB "intrinsic tables", and there is no code, which
would set it to "true".
Reviewed by Marko Mäkelä.
The test failure in rpl.rpl_domain_id_filter_restart is caused by
MDEV-33887. That is, the test uses master_pos_wait() (called
indirectly by sync_slave_with_master) to try and wait for the
replica to catch up to the master. However, the waited on
transaction is ignored by the configured
CHANGE MASTER TO IGNORE_DOMAIN_IDS=()
As MDEV-33887 reports, due to the IO thread updating the binlog
coordinates and the SQL thread updating the GTID state, if the
replica is stopped in-between these updates, the replica state will
be inconsistent. That is, the test expects that the GTID state will
be updated, so upon restart, the replica will be up-to-date.
However, if the replica is stopped before the SQL thread updates its
GTID state, then upon restart, the replica will fetch the previously
ignored event, which is no longer ignored upon restart, and execute
it. This leads to the sporadic extra row in t2.
This patch changes master_pos_wait() to use master_gtid_wait() to
ensure the replica state is consistent with the master state.
increase the MASTER_CONNECT_RETRY time under valgrind,
otherwise the slave gives up retrying before the master is ready
also, cosmetic cleanup of rpl_semi_sync_master_shutdown.test
