Faster thr_alarm()
Added 'Opened_files' status variable to track calls to my_open()
Don't give warnings when running mysql_install_db
Added option --source-install to mysql_install_db
I had to do the following renames() as used polymorphism didn't work with Forte compiler on 64 bit systems
index_read() -> index_read_map()
index_read_idx() -> index_read_idx_map()
index_read_last() -> index_read_last_map()
restores from mysqlbinlog out
Problem: using "mysqlbinlog | mysql" for recoveries the connection_id()
result may differ from what was used when issuing the statement.
Fix: if there is a connection_id() in a statement, write to binlog
SET pseudo_thread_id= XXX; before it and use the value later on.
Bug #27417 thd->no_trans_update.stmt lost value inside of SF-exec-stack
Once had been set the flag might later got reset inside of a stored routine
execution stack.
The reason was in that there was no check if a new statement started at time
of resetting.
The artifact affects most of binlogable DML queries. Notice, that multi-update
is wrapped up within
bug@27716 fix, multi-delete bug@29136.
Fixed with saving parent's statement flag of whether the statement modified
non-transactional table, and unioning (merging) the value with that was gained
in mysql_execute_command.
Resettling thd->no_trans_update members into thd->transaction.`member`;
Asserting code;
Effectively the following properties are held.
1. At the end of a substatement thd->transaction.stmt.modified_non_trans_table
reflects the fact if such a table got modified by the substatement.
That also respects THD::really_abort_on_warnin() requirements.
2. Eventually thd->transaction.stmt.modified_non_trans_table will be computed as
the union of the values of all invoked sub-statements.
That fixes this bug#27417;
Computing of thd->transaction.all.modified_non_trans_table is refined to base to
the stmt's value for all the case including insert .. select statement which
before the patch had an extra issue bug@28960.
Minor issues are covered with mysql_load, mysql_delete, and binloggin of insert in
to temp_table select.
The supplied test verifies limitely, mostly asserts. The ultimate testing is defered
for bug@13270, bug@23333.
When innodb detects a deadlock it calls ha_rollback_trans() to rollback the
main transaction. But such action isn't allowed from inside of triggers and
functions. When it happen the 'Explicit or implicit commit' error is thrown
even if there is no commit/rollback statements in the trigger/function. This
leads to the user confusion.
Now the convert_error_code_to_mysql() function doesn't call the
ha_rollback_trans() function directly but rather calls the
mark_transaction_to_rollback function and returns an error.
The sp_rcontext::find_handler() now doesn't allow errors to be caught by the
trigger/function error handlers when the thd->is_fatal_sub_stmt_error flag
is set. Procedures are still allowed to catch such errors.
The sp_rcontext::find_handler function now accepts a THD handle as a parameter.
The transaction_rollback_request and the is_fatal_sub_stmt_error flags are
added to the THD class. The are initialized by the THD class constructor.
Now the ha_autocommit_or_rollback function rolls back main transaction
when not in a sub statement and the thd->transaction_rollback_request
is set.
The THD::restore_sub_statement_state function now resets the
thd->is_fatal_sub_stmt_error flag on exit from a sub-statement.
--long-query-time is now given in seconds with microseconds as decimals
--min_examined_row_limit added for slow query log
long_query_time user variable is now double with 6 decimals
Added functions to get time in microseconds
Added faster time() functions for system that has gethrtime() (Solaris)
We now do less time() calls.
Added field->in_read_set() and field->in_write_set() for easier field manipulation by handlers
set_var.cc and my_getopt() can now handle DOUBLE variables.
All time() calls changed to my_time()
my_time() now does retry's if time() call fails.
Added debug function for stopping in mysql_admin_table() when tables are locked
Some trivial function and struct variable renames to avoid merge errors.
Fixed compiler warnings
Initialization of some time variables on windows moved to my_init()
between perm and temp tables. Review fixes.
The original bug report complains that if we locked a temporary table
with LOCK TABLES statement, we would not leave LOCK TABLES mode
when this temporary table is dropped.
Additionally, the bug was escalated when it was discovered than
when a temporary transactional table that was previously
locked with LOCK TABLES statement was dropped, futher actions with
this table, such as UNLOCK TABLES, would lead to a crash.
The problem originates from incomplete support of transactional temporary
tables. When we added calls to handler::store_lock()/handler::external_lock()
to operations that work with such tables, we only covered the normal
server code flow and did not cover LOCK TABLES mode.
In LOCK TABLES mode, ::external_lock(LOCK) would sometimes be called without
matching ::external_lock(UNLOCK), e.g. when a transactional temporary table
was dropped. Additionally, this table would be left in the list of LOCKed
TABLES.
The patch aims to address this inadequacy. Now, whenever an instance
of 'handler' is destroyed, we assert that it was priorly
external_lock(UNLOCK)-ed. All the places that violate this assert
were fixed.
This patch introduces no changes in behavior -- the discrepancy in
behavior will be fixed when we start calling ::store_lock()/::external_lock()
for all tables, regardless whether they are transactional or not,
temporary or not.
Bug#25422 (Hang with log tables)
Bug 17876 (Truncating mysql.slow_log in a SP after using cursor locks the
thread)
Bug 23044 (Warnings on flush of a log table)
Bug 29129 (Resetting general_log while the GLOBAL READ LOCK is set causes
a deadlock)
Prior to this fix, the server would hang when performing concurrent
ALTER TABLE or TRUNCATE TABLE statements against the LOG TABLES,
which are mysql.general_log and mysql.slow_log.
The root cause traces to the following code:
in sql_base.cc, open_table()
if (table->in_use != thd)
{
/* wait_for_condition will unlock LOCK_open for us */
wait_for_condition(thd, &LOCK_open, &COND_refresh);
}
The problem with this code is that the current implementation of the
LOGGER creates 'fake' THD objects, like
- Log_to_csv_event_handler::general_log_thd
- Log_to_csv_event_handler::slow_log_thd
which are not associated to a real thread running in the server,
so that waiting for these non-existing threads to release table locks
cause the dead lock.
In general, the design of Log_to_csv_event_handler does not fit into the
general architecture of the server, so that the concept of general_log_thd
and slow_log_thd has to be abandoned:
- this implementation does not work with table locking
- it will not work with commands like SHOW PROCESSLIST
- having the log tables always opened does not integrate well with DDL
operations / FLUSH TABLES / SET GLOBAL READ_ONLY
With this patch, the fundamental design of the LOGGER has been changed to:
- always open and close a log table when writing a log
- remove totally the usage of fake THD objects
- clarify how locking of log tables is implemented in general.
See WL#3984 for details related to the new locking design.
Additional changes (misc bugs exposed and fixed):
1)
mysqldump which would ignore some tables in dump_all_tables_in_db(),
but forget to ignore the same in dump_all_views_in_db().
2)
mysqldump would also issue an empty "LOCK TABLE" command when all the tables
to lock are to be ignored (numrows == 0), instead of not issuing the query.
3)
Internal errors handlers could intercept errors but not warnings
(see sql_error.cc).
4)
Implementing a nested call to open tables, for the performance schema tables,
exposed an existing bug in remove_table_from_cache(), which would perform:
in_use->some_tables_deleted=1;
against another thread, without any consideration about thread locking.
This call inside remove_table_from_cache() was not required anyway,
since calling mysql_lock_abort() takes care of aborting -- cleanly -- threads
that might hold a lock on a table.
This line (in_use->some_tables_deleted=1) has been removed.
we now have exclusive name lock on the table name in mysql_rm_table_part2,
we still should keep LOCK_open - some storage engines are not
ready for locking scope change and assume that LOCK_open is kept.
Still, the binary logging and query cache invalidation calls
moved out of LOCK_open scope.
Fixes some of the broken 5.1-runtime tests (tests break on asserts).
gettimeofday() can fail and presumably, so can time().
Keep an eye on it.
Since we have no data on this at all so far, we just
retry on failure (and log the event), assuming that
this is just an intermittant failure. This might of
course hang the threat until we succeed. Once we know
more about these failures, an appropriate more clever
scheme may be picked (only try so many times per thread,
etc., if that fails, return last "good" time() we got or
some such). Using sql_print_information() to log as this
probably only occurs in high load scenarios where the debug-
trace likely is disabled (or might interfere with testing
the effect). No test-case as this is a non-deterministic
issue.
By default MyISAM overwrites .MYD and .MYI files no
DATA DIRECTORY option is used. This can lead to two tables
using the same .MYD and .MYI files (that can't be dropped).
To prevent CREATE TABLE from overwriting a file a new option
is introduced : keep_files_on_create
When this is on the CREATE TABLE throws an error if either
the .MYD or .MYI exists for a MyISAM table.
The option is off by default (resulting in compatible behavior).
The SELECT INTO OUTFILE FIELDS ENCLOSED BY digit or minus sign,
followed by the same LOAD DATA INFILE statement, used wrond encoding
of non-string fields contained the enclosed character in their text
representation.
Example:
SELECT 15, 9 INTO OUTFILE 'text' FIELDS ENCLOSED BY '5';
Old encoded result in the text file:
5155 595
^ was decoded as the 1st enclosing character of the 2nd field;
^ was skipped as garbage;
^ ^ was decoded as a pair of englosing characters of the 1st field;
^ was decoded as traling space of the first field;
^^ was decoded as a doubled enclosed character.
New encoded result in the text file:
51\55 595
^ ^ pair of enclosing characters of the 1st field;
^^ escaped enclosed character.
Add more accessors to MySQL internals in mysql/plugin.h, for storage
engine plugins.
Add some accessors specific to the InnoDB storage engine, to allow
InnoDB to be compiled as a plugin (without MYSQL_SERVER). InnoDB
has additional requirements, due to its foreign key support, etc.
The `SELECT 'r' INTO OUTFILE ... FIELDS ENCLOSED BY 'r' ' statement
encoded the 'r' string to a 4 byte string of value x'725c7272'
(sequence of 4 characters: r\rr).
The LOAD DATA statement decoded this string to a 1 byte string of
value x'0d' (ASCII Carriage Return character) instead of the original
'r' character.
The same error also happened with the FIELDS ENCLOSED BY clause
followed by special characters: 'n', 't', 'r', 'b', '0', 'Z' and 'N'.
NOTE 1: This is a result of the undocumented feature: the LOAD DATA INFILE
recognises 2-byte input sequences like \n, \t, \r and \Z in addition
to documented 2-byte sequences: \0 and \N. This feature should be
documented (here backspace character is a default ESCAPED BY character,
in the real-life example it may be any ESCAPED BY character).
NOTE 2, changed behaviour:
Now the `SELECT INTO OUTFILE' statement with the `FIELDS ENCLOSED BY'
clause followed by one of: 'n', 't', 'r', 'b', '0', 'Z' or 'N' characters
encodes this special character itself by doubling it ('r' --> 'rr'),
not by prepending it with an escape character.
leads to the table corruption
New Field::store() method implemented to explicitly set thd->count_cuted_fields
before value storing, instead of (incorrectly) setting it in the CSV storage engine.
Thread row counter now properly incremented during check and repair in the CSV engine.
ALTER VIEW is currently not supported as a prepared statement
and should be disabled as such as they otherwise could cause server crashes.
ALTER VIEW is currently not supported when called from stored
procedures or functions for related reasons and should also be disabled.
This patch disables these DDL statements and adjusts the appropriate test
cases accordingly.
Additional tests has been added to reflect on the fact that we do support
CREATE/ALTER/DROP TABLE for Prepared Statements (PS), Stored Procedures (SP)
and PS within SP.
CREATE/DROP TEMPORARY TABLE + ROLLBACK on master
The transaction ability of the storage engines of
the tables on the replication master and the replication
slave must generally be the same.
When the storage engine type of the slave is
non-transactional then transactions on the master that
mix update of transactional and non-transactional tables
should be avoided because they will cause inconsistency of
the data between the master's transactional table and the
slave's non-transactional table.
The effect described by this bug is actually expected.
A detailed test case is added (to be merged later to
the updated rpl_ddl.test), as there was no coverage
by the existing tests.
Some code cleanup is also added by this change.
The method select_insert::send_error does two things, it rolls back a statement
being executed and outputs an error message. But when a
nonexistent column is referenced, an error message has been published already and
there is no need to publish another.
Fixed by moving all functionality beyond publishing an error message into
select_insert::abort() and calling only that function.
Coding style: classes start with a capital letter.
Rename some classes related to parsing:
create_field -> Create_field
foreign_key -> Foreign_key
key_part_spec -> Key_part_spec
The result of the CHECK OPTION condition evaluation over an
updated record and records of merged tables was arbitrary and
dependant on the order of records in the merged tables during
the execution of SELECT statement.
The CHECK OPTION expression was evaluated over expired record
buffers (with arbitrary data in the fields).
Rowids of tables used in the CHECK OPTION expression were
added to temporary table rows. The multi_update::do_updates()
method was modified to restore necessary record buffers
before evaluation of the CHECK OPTION condition.
Moving code to check storage engine capabilities to after tables
are locked. Moving code to cache table flags so that table flags
are read from the storage engine at the beginning of the statement
in addition to when the storage engine is opened.
To handle CREATE-SELECT, the decision function is called after the
table is created and it is called with all tables that are in the select
part of the statement as well as the newly created table.
The reason for the bug was that replaying of a query on slave could not be possible since its event
was recorded with the killed error. Due to the specific of handling INSERT, which per-row-while-loop is
unbreakable to killing, the query on transactional table should have not appeared in binlog unless
there was a call to a stored routine that got interrupted with killing (and then there must be an error
returned out of the loop).
The offered solution added the following rule for binlogging of INSERT that accounts the above
specifics:
For INSERT on transactional-table if the error was not set the only raised flag
is harmless and is ignored via masking out on time of creation of binlog event.
For both table types the combination of raised error and KILLED flag indicates that there
was potentially partial execution on master and consistency is under the question.
In that case the code continues to binlog an event with an appropriate killed error.
The fix relies on the specified behaviour of stored routine that must propagate the error
to the top level query handling if the thd->killed flag was raised in the routine execution.
The patch adds an arg with the default killed-status-unset value to Query_log_event::Query_log_event.
Bug#4968 ""Stored procedure crash if cursor opened on altered table"
Bug#6895 "Prepared Statements: ALTER TABLE DROP COLUMN does nothing"
Bug#19182 "CREATE TABLE bar (m INT) SELECT n FROM foo; doesn't work from
stored procedure."
Bug#19733 "Repeated alter, or repeated create/drop, fails"
Bug#22060 "ALTER TABLE x AUTO_INCREMENT=y in SP crashes server"
Bug#24879 "Prepared Statements: CREATE TABLE (UTF8 KEY) produces a
growing key length" (this bug is not fixed in 5.0)
Re-execution of CREATE DATABASE, CREATE TABLE and ALTER TABLE
statements in stored routines or as prepared statements caused
incorrect results (and crashes in versions prior to 5.0.25).
In 5.1 the problem occured only for CREATE DATABASE, CREATE TABLE
SELECT and CREATE TABLE with INDEX/DATA DIRECTOY options).
The problem of bugs 4968, 19733, 19282 and 6895 was that functions
mysql_prepare_table, mysql_create_table and mysql_alter_table are not
re-execution friendly: during their operation they modify contents
of LEX (members create_info, alter_info, key_list, create_list),
thus making the LEX unusable for the next execution.
In particular, these functions removed processed columns and keys from
create_list, key_list and drop_list. Search the code in sql_table.cc
for drop_it.remove() and similar patterns to find evidence.
The fix is to supply to these functions a usable copy of each of the
above structures at every re-execution of an SQL statement.
To simplify memory management, LEX::key_list and LEX::create_list
were added to LEX::alter_info, a fresh copy of which is created for
every execution.
The problem of crashing bug 22060 stemmed from the fact that the above
metnioned functions were not only modifying HA_CREATE_INFO structure
in LEX, but also were changing it to point to areas in volatile memory
of the execution memory root.
The patch solves this problem by creating and using an on-stack
copy of HA_CREATE_INFO in mysql_execute_command.
Additionally, this patch splits the part of mysql_alter_table
that analizes and rewrites information from the parser into
a separate function - mysql_prepare_alter_table, in analogy with
mysql_prepare_table, which is renamed to mysql_prepare_create_table.
Made year 2000 handling more uniform
Removed year 2000 handling out from calc_days()
The above removes some bugs in date/datetimes with year between 0 and 200
Now we get a note when we insert a datetime value into a date column
For default values to CREATE, don't give errors for warning level NOTE
Fixed some compiler failures
Added library ws2_32 for windows compilation (needed if we want to compile with IOCP support)
Removed duplicate typedef TIME and replaced it with MYSQL_TIME
Better (more complete) fix for: Bug#21103 "DATE column not compared as DATE"
Fixed properly Bug#18997 "DATE_ADD and DATE_SUB perform year2K autoconversion magic on 4-digit year value"
Fixed Bug#23093 "Implicit conversion of 9912101 to date does not match cast(9912101 as date)"
Replacing binlog_row_based_if_mixed with variable binlog_stmt_flags
holding several flags and adding member functions to manipulate the
flags.
Added code to generate a warning when an attempt to log an unsafe
statement to the binary log was made. The warning is both pushed to the
SHOW WARNINGS table and written to the error log. The prevent flooding
the error log, the warning is just written to the error log once per
open session.
The following type conversions was done:
- Changed byte to uchar
- Changed gptr to uchar*
- Change my_string to char *
- Change my_size_t to size_t
- Change size_s to size_t
Removed declaration of byte, gptr, my_string, my_size_t and size_s.
Following function parameter changes was done:
- All string functions in mysys/strings was changed to use size_t
instead of uint for string lengths.
- All read()/write() functions changed to use size_t (including vio).
- All protocoll functions changed to use size_t instead of uint
- Functions that used a pointer to a string length was changed to use size_t*
- Changed malloc(), free() and related functions from using gptr to use void *
as this requires fewer casts in the code and is more in line with how the
standard functions work.
- Added extra length argument to dirname_part() to return the length of the
created string.
- Changed (at least) following functions to take uchar* as argument:
- db_dump()
- my_net_write()
- net_write_command()
- net_store_data()
- DBUG_DUMP()
- decimal2bin() & bin2decimal()
- Changed my_compress() and my_uncompress() to use size_t. Changed one
argument to my_uncompress() from a pointer to a value as we only return
one value (makes function easier to use).
- Changed type of 'pack_data' argument to packfrm() to avoid casts.
- Changed in readfrm() and writefrom(), ha_discover and handler::discover()
the type for argument 'frmdata' to uchar** to avoid casts.
- Changed most Field functions to use uchar* instead of char* (reduced a lot of
casts).
- Changed field->val_xxx(xxx, new_ptr) to take const pointers.
Other changes:
- Removed a lot of not needed casts
- Added a few new cast required by other changes
- Added some cast to my_multi_malloc() arguments for safety (as string lengths
needs to be uint, not size_t).
- Fixed all calls to hash-get-key functions to use size_t*. (Needed to be done
explicitely as this conflict was often hided by casting the function to
hash_get_key).
- Changed some buffers to memory regions to uchar* to avoid casts.
- Changed some string lengths from uint to size_t.
- Changed field->ptr to be uchar* instead of char*. This allowed us to
get rid of a lot of casts.
- Some changes from true -> TRUE, false -> FALSE, unsigned char -> uchar
- Include zlib.h in some files as we needed declaration of crc32()
- Changed MY_FILE_ERROR to be (size_t) -1.
- Changed many variables to hold the result of my_read() / my_write() to be
size_t. This was needed to properly detect errors (which are
returned as (size_t) -1).
- Removed some very old VMS code
- Changed packfrm()/unpackfrm() to not be depending on uint size
(portability fix)
- Removed windows specific code to restore cursor position as this
causes slowdown on windows and we should not mix read() and pread()
calls anyway as this is not thread safe. Updated function comment to
reflect this. Changed function that depended on original behavior of
my_pwrite() to itself restore the cursor position (one such case).
- Added some missing checking of return value of malloc().
- Changed definition of MOD_PAD_CHAR_TO_FULL_LENGTH to avoid 'long' overflow.
- Changed type of table_def::m_size from my_size_t to ulong to reflect that
m_size is the number of elements in the array, not a string/memory
length.
- Moved THD::max_row_length() to table.cc (as it's not depending on THD).
Inlined max_row_length_blob() into this function.
- More function comments
- Fixed some compiler warnings when compiled without partitions.
- Removed setting of LEX_STRING() arguments in declaration (portability fix).
- Some trivial indentation/variable name changes.
- Some trivial code simplifications:
- Replaced some calls to alloc_root + memcpy to use
strmake_root()/strdup_root().
- Changed some calls from memdup() to strmake() (Safety fix)
- Simpler loops in client-simple.c
This bug affects multi-row INSERT ... ON DUPLICATE into table
with PRIMARY KEY of AUTO_INCREMENT field and some additional UNIQUE indices.
If the first row in multi-row INSERT contains duplicated values of UNIQUE
indices, then following rows of multi-row INSERT (with either duplicated or
unique key field values) may me applied to _arbitrary_ records of table as
updates.
This bug was introduced in 5.0. Related code was widely rewritten in 5.1, and
5.1 is already free of this problem. 4.1 was not affected too.
When updating the row during INSERT ON DUPLICATE KEY UPDATE, we called
restore_auto_increment(), which set next_insert_id back to 0, but we
forgot to set clear_next_insert_id back to 0.
restore_auto_increment() function has been fixed.
Add a new autoconf paremeter --{en,dis}able-community-features . The
default is disable for enterprise servers.
Though this is a 5.0 tree, it is only to be merged into the 5.0-community
tree and the global 5.1 tree, never to the 5.0-enterprise tree.
The issue found with bug 25411 is due to the function skip_rear_comments()
which damages the source code while implementing a work around.
The root cause of the problem is in the lexical analyser, which does not
process special comments properly.
For special comments like :
[1] aaa /*!50000 bbb */ ccc
since 5.0 is a version older that the current code, the parser is in lining
the content of the special comment, so that the query to process is
[2] aaa bbb ccc
However, the text of the query captured when processing a stored procedure,
stored function or trigger (or event in 5.1), can be after rebuilding it:
[3] aaa bbb */ ccc
which is wrong.
To fix bug 25411 properly, the lexical analyser needs to return [2] when
in lining special comments.
In order to implement this, some preliminary cleanup is required in the code,
which is implemented by this patch.
Before this change, the structure named LEX (or st_lex) contains attributes
that belong to lexical analysis, as well as attributes that represents the
abstract syntax tree (AST) of a statement.
Creating a new LEX structure for each statements (which makes sense for the
AST part) also re-initialized the lexical analysis phase each time, which
is conceptually wrong.
With this patch, the previous st_lex structure has been split in two:
- st_lex represents the Abstract Syntax Tree for a statement. The name "lex"
has not been changed to avoid a bigger impact in the code base.
- class lex_input_stream represents the internal state of the lexical
analyser, which by definition should *not* be reinitialized when parsing
multiple statements from the same input stream.
This change is a pre-requisite for bug 25411, since the implementation of
lex_input_stream will later improve to deal properly with special comments,
and this processing can not be done with the current implementation of
sp_head::reset_lex and sp_head::restore_lex, which interfere with the lexer.
This change set alone does not fix bug 25411.
streamline the event worker thread work flow and try to eliminate
possibilities for memory corruptions that might have been
lurking in previous (complicated) code.
This patch:
* removes Event_job_data::compile that was never used
* cleans up Event_job_data::execute to minimize juggling with
thread context and eliminate unneded code paths
* Implements Security_context::change/restore_security_context
to be able to re-use these methods in all stored programs
This is to maybe fix Bug#27733 "Valgrind failures in
remove_table_from_cache".
Review comments applied.
skipped):
By moving statement end actions from Rows_log_event::do_apply_event() to
Rows_log_event::do_update_pos() they will always be executed, even if
Rows_log_event::do_apply_event() is skipped because the event originated
at the same server. This because Rows_log_event::do_update_pos() is always
executed (unless Rows_log_event::do_apply_event() failed with an error,
in which case the slave stops with an error anyway).
Adding test case.
Fixing logic to detect if inside a group. If a rotate event occured
when an initial prefix of events for a statement, but for which the
table did contain a key, last_event_start_time is set to zero, causing
rotate to end the group but without unlocking any tables. This left a
lock hanging around, which subsequently triggered an assertion when a
second attempt was made to lock the same sequence of tables.
In order to solve the above problem, a new flag was added to the relay
log info structure that is used to indicate that the replication thread
is currently executing a statement. Using this flag, the replication
thread is in a group if it is either in a statement or inside a trans-
action.
The patch also eliminates some gratuitous header file inclusions that
were not needed (and caused compile errors) and replaced them with
forward definitions.
Made year 2000 handling more uniform
Removed year 2000 handling out from calc_days()
The above removes some bugs in date/datetimes with year between 0 and 200
Now we get a note when we insert a datetime value into a date column
For default values to CREATE, don't give errors for warning level NOTE
Fixed some compiler failures
Added library ws2_32 for windows compilation (needed if we want to compile with IOCP support)
Removed duplicate typedef TIME and replaced it with MYSQL_TIME
Better (more complete) fix for: Bug#21103 "DATE column not compared as DATE"
Fixed properly Bug#18997 "DATE_ADD and DATE_SUB perform year2K autoconversion magic on 4-digit year value"
Fixed Bug#23093 "Implicit conversion of 9912101 to date does not match cast(9912101 as date)"
thd->options' OPTION_STATUS_NO_TRANS_UPDATE bit was not restored at the end of SF() invocation, where
SF() modified non-ta table.
As the result of this artifact it was not possible to detect whether there were any side-effects when
top-level query ends.
If the top level query table was not modified and the bit is lost there would be no binlogging.
Fixed with preserving the bit inside of thd->no_trans_update struct. The struct agregates two bool flags
telling whether the current query and the current transaction modified any non-ta table.
The flags stmt, all are dropped at the end of the query and the transaction.
context was used as an argument of GROUP_CONCAT.
Ensured correct setting of the depended_from field in references
generated for set functions aggregated in outer selects.
A wrong value of this field resulted in wrong maps returned by
used_tables() for these references.
Made sure that a temporary table field is added for any set function
aggregated in outer context when creation of a temporary table is
needed to execute the inner subquery.
To correctly decide which predicates can be evaluated with a given table
the optimizer must know the exact set of tables that a predicate depends
on. If that mask is too wide (refer to non-existing tables) the optimizer
can erroneously skip a predicate.
One such case of wrong table usage mask were the aggregate functions.
The have a all-1 mask (meaning depend on all tables, including non-existent
ones).
Fixed by making a real used_tables mask for the aggregates. The mask is
constructed in the following way :
1. OR the table dependency masks of all the arguments of the aggregate.
2. If all the arguments of the function are from the local name resolution
context and it is evaluated in the same name resolution
context where it is referenced all the tables from that name resolution
context are OR-ed to the dependency mask. This is to denote that an
aggregate function depends on the number of rows it processes.
3. Handle correctly the case of an aggregate function optimization (such that
the aggregate function can be pre-calculated and made a constant).
Made sure that an aggregate function is never a constant (unless subject of a
specific optimization and pre-calculation).
One other flaw was revealed and fixed in the process : references were
not calling the recalculation method for used_tables of their targets.
touched but not actually changed.
The LAST_INSERT_ID() is reset to 0 if no rows were inserted or changed.
This is the case when an INSERT ... ON DUPLICATE KEY UPDATE updates a row
with the same values as the row contains.
Now the LAST_INSERT_ID() values is reset to 0 only if there were no rows
successfully inserted or touched.
The new 'touched' field is added to the COPY_INFO structure. It holds the
number of rows that were touched no matter whether they were actually
changed or not.
fixes).
The legend: on a replication slave, in case a trigger creation
was filtered out because of application of replicate-do-table/
replicate-ignore-table rule, the parsed definition of a trigger was not
cleaned up properly. LEX::sphead member was left around and leaked
memory. Until the actual implementation of support of
replicate-ignore-table rules for triggers by the patch for Bug 24478 it
was never the case that "case SQLCOM_CREATE_TRIGGER"
was not executed once a trigger was parsed,
so the deletion of lex->sphead there worked and the memory did not leak.
The fix:
The real cause of the bug is that there is no 1 or 2 places where
we can clean up the main LEX after parse. And the reason we
can not have just one or two places where we clean up the LEX is
asymmetric behaviour of MYSQLparse in case of success or error.
One of the root causes of this behaviour is the code in Item::Item()
constructor. There, a newly created item adds itself to THD::free_list
- a single-linked list of Items used in a statement. Yuck. This code
is unaware that we may have more than one statement active at a time,
and always assumes that the free_list of the current statement is
located in THD::free_list. One day we need to be able to explicitly
allocate an item in a given Query_arena.
Thus, when parsing a definition of a stored procedure, like
CREATE PROCEDURE p1() BEGIN SELECT a FROM t1; SELECT b FROM t1; END;
we actually need to reset THD::mem_root, THD::free_list and THD::lex
to parse the nested procedure statement (SELECT *).
The actual reset and restore is implemented in semantic actions
attached to sp_proc_stmt grammar rule.
The problem is that in case of a parsing error inside a nested statement
Bison generated parser would abort immediately, without executing the
restore part of the semantic action. This would leave THD in an
in-the-middle-of-parsing state.
This is why we couldn't have had a single place where we clean up the LEX
after MYSQLparse - in case of an error we needed to do a clean up
immediately, in case of success a clean up could have been delayed.
This left the door open for a memory leak.
One of the following possibilities were considered when working on a fix:
- patch the replication logic to do the clean up. Rejected
as breaks module borders, replication code should not need to know the
gory details of clean up procedure after CREATE TRIGGER.
- wrap MYSQLparse with a function that would do a clean up.
Rejected as ideally we should fix the problem when it happens, not
adjust for it outside of the problematic code.
- make sure MYSQLparse cleans up after itself by invoking the clean up
functionality in the appropriate places before return. Implemented in
this patch.
- use %destructor rule for sp_proc_stmt to restore THD - cleaner
than the prevoius approach, but rejected
because needs a careful analysis of the side effects, and this patch is
for 5.0, and long term we need to use the next alternative anyway
- make sure that sp_proc_stmt doesn't juggle with THD - this is a
large work that will affect many modules.
Cleanup: move main_lex and main_mem_root from Statement to its
only two descendants Prepared_statement and THD. This ensures that
when a Statement instance was created for purposes of statement backup,
we do not involve LEX constructor/destructor, which is fairly expensive.
In order to track that the transformation produces equivalent
functionality please check the respective constructors and destructors
of Statement, Prepared_statement and THD - these members were
used only there.
This cleanup is unrelated to the patch.
Bug 18914 (Calling certain SPs from triggers fail)
Bug 20713 (Functions will not not continue for SQLSTATE VALUE '42S02')
Bug 21825 (Incorrect message error deleting records in a table with a
trigger for inserting)
Bug 22580 (DROP TABLE in nested stored procedure causes strange dependency
error)
Bug 25345 (Cursors from Functions)
This fix resolves a long standing issue originally reported with bug 8407,
which affect the behavior of Stored Procedures, Stored Functions and Trigger
in many different ways, causing symptoms reported by all the bugs listed.
In all cases, the root cause of the problem traces back to 8407 and how the
server locks tables involved with sub statements.
Prior to this fix, the implementation of stored routines would:
- compute the transitive closure of all the tables referenced by a top level
statement
- open and lock all the tables involved
- execute the top level statement
"transitive closure of tables" means collecting:
- all the tables,
- all the stored functions,
- all the views,
- all the table triggers
- all the stored procedures
involved, and recursively inspect these objects definition to find more
references to more objects, until the list of every object referenced does
not grow any more.
This mechanism is known as "pre-locking" tables before execution.
The motivation for locking all the tables (possibly) used at once is to
prevent dead locks.
One problem with this approach is that, if the execution path the code
really takes during runtime does not use a given table, and if the table is
missing, the server would not execute the statement.
This in particular has a major impact on triggers, since a missing table
referenced by an update/delete trigger would prevent an insert trigger to run.
Another problem is that stored routines might define SQL exception handlers
to deal with missing tables, but the server implementation would never give
user code a chance to execute this logic, since the routine is never
executed when a missing table cause the pre-locking code to fail.
With this fix, the internal implementation of the pre-locking code has been
relaxed of some constraints, so that failure to open a table does not
necessarily prevent execution of a stored routine.
In particular, the pre-locking mechanism is now behaving as follows:
1) the first step, to compute the transitive closure of all the tables
possibly referenced by a statement, is unchanged.
2) the next step, which is to open all the tables involved, only attempts
to open the tables added by the pre-locking code, but silently fails without
reporting any error or invoking any exception handler is the table is not
present. This is achieved by trapping internal errors with
Prelock_error_handler
3) the locking step only locks tables that were successfully opened.
4) when executing sub statements, the list of tables used by each statements
is evaluated as before. The tables needed by the sub statement are expected
to be already opened and locked. Statement referencing tables that were not
opened in step 2) will fail to find the table in the open list, and only at
this point will execution of the user code fail.
5) when a runtime exception is raised at 4), the instruction continuation
destination (the next instruction to execute in case of SQL continue
handlers) is evaluated.
This is achieved with sp_instr::exec_open_and_lock_tables()
6) if a user exception handler is present in the stored routine, that
handler is invoked as usual, so that ER_NO_SUCH_TABLE exceptions can be
trapped by stored routines. If no handler exists, then the runtime execution
will fail as expected.
With all these changes, a side effect is that view security is impacted, in
two different ways.
First, a view defined as "select stored_function()", where the stored
function references a table that may not exist, is considered valid.
The rationale is that, because the stored function might trap exceptions
during execution and still return a valid result, there is no way to decide
when the view is created if a missing table really cause the view to be invalid.
Secondly, testing for existence of tables is now done later during
execution. View security, which consist of trapping errors and return a
generic ER_VIEW_INVALID (to prevent disclosing information) was only
implemented at very specific phases covering *opening* tables, but not
covering the runtime execution. Because of this existing limitation,
errors that were previously trapped and converted into ER_VIEW_INVALID are
not trapped, causing table names to be reported to the user.
This change is exposing an existing problem, which is independent and will
be resolved separately.
can be specified
Currently MySQL allows one to specify what indexes to ignore during
join optimization. The scope of the current USE/FORCE/IGNORE INDEX
statement is only the FROM clause, while all other clauses are not
affected.
However, in certain cases, the optimizer
may incorrectly choose an index for sorting and/or grouping, and
produce an inefficient query plan.
This task provides the means to specify what indexes are
ignored/used for what operation in a more fine-grained manner, thus
making it possible to manually force a better plan. We do this
by extending the current IGNORE/USE/FORCE INDEX syntax to:
IGNORE/USE/FORCE INDEX [FOR {JOIN | ORDER | GROUP BY}]
so that:
- if no FOR is specified, the index hint will apply everywhere.
- if MySQL is started with the compatibility option --old_mode then
an index hint without a FOR clause works as in 5.0 (i.e, the
index will only be ignored for JOINs, but can still be used to
compute ORDER BY).
See the WL#3527 for further details.
"Server Variables for Plugins"
Implement support for plugins to declare server variables.
Demonstrate functionality by removing InnoDB specific code from sql/*
New feature for HASH - HASH_UNIQUE flag
New feature for DYNAMIC_ARRAY - initializer accepts preallocated ptr.
Completed support for plugin reference counting.
This patch fixes problem that LOAD DATA could use different
character sets when loading files on master and on slave sides:
- Adding replication of thd->variables.collation_database
- Adding optional character set clause into LOAD DATA
Note, the second way, with explicit CHARACTER SET clause
should be the recommended way to load data using an alternative
character set.
The old way, using "SET @@character_set_database=xxx" should be
gradually depricated.
Triggers in SBR mode."
BUG#14914 "SP: Uses of session variables in routines are not always
replicated"
BUG#25167 "Dupl. usage of user-variables in trigger/function is not
replicated correctly"
User-defined variables used inside of stored functions/triggers in
statements which did not update tables directly were not replicated.
We also had problems with replication of user-defined variables which
were used in triggers (or stored functions called from table-updating
statements) more than once.
This patch addresses the first issue by enabling logging of all
references to user-defined variables in triggers/stored functions
and not only references from table-updating statements.
The second issue stemmed from the fact that for user-defined
variables used from triggers or stored functions called from
table-updating statements we were writing binlog events for each
reference instead of only one event for the first reference.
This problem is already solved for stored functions called from
non-updating statements with help of "event unioning" mechanism.
So the patch simply extends this mechanism to the case affected.
It also fixes small problem in this mechanism which caused wrong
logging of references to user-variables in cases when non-updating
statement called several stored functions which used the same
variable and some of these function calls were omitted from binlog
as they were not updating any tables.
Fixed compile-pentium64 scripts
Fixed wrong estimate of update_with_key_prefix in sql-bench
Merge bk-internal.mysql.com:/home/bk/mysql-5.1 into mysql.com:/home/my/mysql-5.1
Fixed unsafe define of uint4korr()
Fixed that --extern works with mysql-test-run.pl
Small trivial cleanups
This also fixes a bug in counting number of rows that are updated when we have many simultanous queries
Move all connection handling and command exectuion main loop from sql_parse.cc to sql_connection.cc
Split handle_one_connection() into reusable sub functions.
Split create_new_thread() into reusable sub functions.
Added thread_scheduler; Preliminary interface code for future thread_handling code.
Use 'my_thread_id' for internal thread id's
Make thr_alarm_kill() to depend on thread_id instead of thread
Make thr_abort_locks_for_thread() depend on thread_id instead of thread
In store_globals(), set my_thread_var->id to be thd->thread_id.
Use my_thread_var->id as basis for my_thread_name()
The above changes makes the connection we have between THD and threads more soft.
Added a lot of DBUG_PRINT() and DBUG_ASSERT() functions
Fixed compiler warnings
Fixed core dumps when running with --debug
Removed setting of signal masks (was never used)
Made event code call pthread_exit() (portability fix)
Fixed that event code doesn't call DBUG_xxx functions before my_thread_init() is called.
Made handling of thread_id and thd->variables.pseudo_thread_id uniform.
Removed one common 'not freed memory' warning from mysqltest
Fixed a couple of usage of not initialized warnings (unlikely cases)
Suppress compiler warnings from bdb and (for the moment) warnings from ndb
to a single statement.
---
Bug#24795: SHOW PROFILE
Profiling is only partially functional on some architectures. Where
there is no getrusage() system call, presently Null values are
returned where it would be required. Notably, Windows needs some love
applied to make it as useful.
Syntax this adds:
SHOW PROFILES
SHOW PROFILE [types] [FOR QUERY n] [OFFSET n] [LIMIT n]
where "n" is an integer
and "types" is zero or many (comma-separated) of
"CPU"
"MEMORY" (not presently supported)
"BLOCK IO"
"CONTEXT SWITCHES"
"PAGE FAULTS"
"IPC"
"SWAPS"
"SOURCE"
"ALL"
It also adds a session variable (boolean) "profiling", set to "no"
by default, and (integer) profiling_history_size, set to 15 by
default.
This patch abstracts setting THDs' "proc_info" behind a macro that
can be used as a hook into the profiling code when profiling
support is compiled in. All future code in this line should use
that mechanism for setting thd->proc_info.
---
Tests are now set to omit the statistics.
---
Adds an Information_schema table, "profiling" for access to
"show profile" data.
---
Merge zippy.cornsilk.net:/home/cmiller/work/mysql/mysql-5.0-community-3--bug24795
into zippy.cornsilk.net:/home/cmiller/work/mysql/mysql-5.0-community
---
Fix merge problems.
---
Fixed one bug in the query_source being NULL.
Updated test results.
---
Include more thorough profiling tests.
Improve support for prepared statements.
Use session-specific query IDs, starting at zero.
---
Selecting from I_S.profiling is no longer quashed in profiling, as
requested by Giuseppe.
Limit the size of captured query text.
No longer log queries that are zero length.
- Implement --secure-file-priv=<dir> option that limits
"load_file", "LOAD DATA" and "SELECT .. INTO OUTFILE" to work
with files in specified dir.
- Use above option for mysqld in mysql-test-run.pl
Protocol_simple->Protocol_text; Protocol_prep->Protocol_binary
and also THD::protocol_simple->THD::protocol_text,
THD::protocol_prep->THD::protocol_binary.
Reason: the binary protocol is not bound to be used only with
prepared statements long term (see WL#3559 "Decouple binary protocol
from prepared statements"). Renaming now is pressing because
the fix for BUG#735 "Prepared Statements: there is
no support for Query Cache" will introduce a new member
in class Query_cache_flags telling about the protocol's nature.
Other reason: "simple" is less accurate than "text".
Future patches for BUG#735 will rely on this cset.
Corrected spelling in copyright text
Makefile.am:
Don't update the files from BitKeeper
Many files:
Removed "MySQL Finland AB & TCX DataKonsult AB" from copyright header
Adjusted year(s) in copyright header
Many files:
Added GPL copyright text
Removed files:
Docs/Support/colspec-fix.pl
Docs/Support/docbook-fixup.pl
Docs/Support/docbook-prefix.pl
Docs/Support/docbook-split
Docs/Support/make-docbook
Docs/Support/make-makefile
Docs/Support/test-make-manual
Docs/Support/test-make-manual-de
Docs/Support/xwf
from log):
When row-based logging is used, the CREATE-SELECT is written as two
parts: as a CREATE TABLE statement and as the rows for the table. For
both transactional and non-transactional tables, the CREATE TABLE
statement was written to the transaction cache, as were the rows, and
on statement end, the entire transaction cache was written to the binary
log if the table was non-transactional. For transactional tables, the
events were kept in the transaction cache until end of transaction (or
statement that were not part of a transaction).
For the case when AUTOCOMMIT=0 and we are creating a transactional table
using a create select, we would then keep the CREATE TABLE statement and
the rows for the CREATE-SELECT, while executing the following statements.
On a rollback, the transaction cache would then be cleared, which would
also remove the CREATE TABLE statement. Hence no table would be created
on the slave, while there is an empty table on the master.
This relates to BUG#22865 where the table being created exists on the
master, but not on the slave during insertion of rows into the newly
created table. This occurs since the CREATE TABLE statement were still
in the transaction cache until the statement finished executing, and
possibly longer if the table was transactional.
This patch changes the behaviour of the CREATE-SELECT statement by
adding an implicit commit at the end of the statement when creating
non-temporary tables. Hence, non-temporary tables will be written to the
binary log on completion, and in the even of AUTOCOMMIT=0, a new
transaction will be started. Temporary tables do not commit an ongoing
transaction: neither as a pre- not a post-commit.
The events for both transactional and non-transactional tables are
saved in the transaction cache, and written to the binary log at end
of the statement.
- Removed not used variables and functions
- Added #ifdef around code that is not used
- Renamed variables and functions to avoid conflicts
- Removed some not used arguments
Fixed some class/struct warnings in ndb
Added define IS_LONGDATA() to simplify code in libmysql.c
I did run gcov on the changes and added 'purecov' comments on almost all lines that was not just variable name changes
Bug#4968 "Stored procedure crash if cursor opened on altered table"
Bug#19733 "Repeated alter, or repeated create/drop, fails"
Bug#19182 "CREATE TABLE bar (m INT) SELECT n FROM foo; doesn't work from
stored procedure."
Bug#6895 "Prepared Statements: ALTER TABLE DROP COLUMN does nothing"
Bug#22060 "ALTER TABLE x AUTO_INCREMENT=y in SP crashes server"
Test cases for bugs 4968, 19733, 6895 will be added in 5.0.
Re-execution of CREATE DATABASE, CREATE TABLE and ALTER TABLE
statements in stored routines or as prepared statements caused
incorrect results (and crashes in versions prior to 5.0.25).
In 5.1 the problem occured only for CREATE DATABASE, CREATE TABLE
SELECT and CREATE TABLE with INDEX/DATA DIRECTOY options).
The problem of bugs 4968, 19733, 19282 and 6895 was that functions
mysql_prepare_table, mysql_create_table and mysql_alter_table were not
re-execution friendly: during their operation they used to modify contents
of LEX (members create_info, alter_info, key_list, create_list),
thus making the LEX unusable for the next execution.
In particular, these functions removed processed columns and keys from
create_list, key_list and drop_list. Search the code in sql_table.cc
for drop_it.remove() and similar patterns to find evidence.
The fix is to supply to these functions a usable copy of each of the
above structures at every re-execution of an SQL statement.
To simplify memory management, LEX::key_list and LEX::create_list
were added to LEX::alter_info, a fresh copy of which is created for
every execution.
The problem of crashing bug 22060 stemmed from the fact that the above
metnioned functions were not only modifying HA_CREATE_INFO structure in
LEX, but also were changing it to point to areas in volatile memory of
the execution memory root.
The patch solves this problem by creating and using an on-stack
copy of HA_CREATE_INFO (note that code in 5.1 already creates and
uses a copy of this structure in mysql_create_table()/alter_table(),
but this approach didn't work well for CREATE TABLE SELECT statement).
