Conflicts
=========
Text conflict in .bzr-mysql/default.conf
Text conflict in libmysqld/CMakeLists.txt
Text conflict in libmysqld/Makefile.am
Text conflict in mysql-test/collections/default.experimental
Text conflict in mysql-test/extra/rpl_tests/rpl_row_sp006.test
Text conflict in mysql-test/suite/binlog/r/binlog_tmp_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata_fatal.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_create_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_sp006_InnoDB.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_log.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_sp006.result
Text conflict in mysql-test/t/mysqlbinlog.test
Text conflict in sql/CMakeLists.txt
Text conflict in sql/Makefile.am
Text conflict in sql/log_event_old.cc
Text conflict in sql/rpl_rli.cc
Text conflict in sql/slave.cc
Text conflict in sql/sql_binlog.cc
Text conflict in sql/sql_lex.h
21 conflicts encountered.
NOTE
====
mysql-5.1-rpl-merge has been made a mirror of mysql-next-mr:
- "mysql-5.1-rpl-merge$ bzr pull ../mysql-next-mr"
This is the first cset (merge/...) committed after pulling
from mysql-next-mr.
2630.39.1, 2630.28.29, 2630.34.3, 2630.34.2, 2630.34.1, 2630.29.29,
2630.29.28, 2630.31.1, 2630.28.13, 2630.28.10, 2617.23.14 and
some other minor revisions.
This patch implements:
WL#4264 "Backup: Stabilize Service Interface" -- all the
server prerequisites except si_objects.{h,cc} themselves (they can
be just copied over, when needed).
WL#4435: Support OUT-parameters in prepared statements.
(and all issues in the initial patches for these two
tasks, that were discovered in pushbuild and during testing).
Bug#39519: mysql_stmt_close() should flush all data
associated with the statement.
After execution of a prepared statement, send OUT parameters of the invoked
stored procedure, if any, to the client.
When using the binary protocol, send the parameters in an additional result
set over the wire. When using the text protocol, assign out parameters to
the user variables from the CALL(@var1, @var2, ...) specification.
The following refactoring has been made:
- Protocol::send_fields() was renamed to Protocol::send_result_set_metadata();
- A new Protocol::send_result_set_row() was introduced to incapsulate
common functionality for sending row data.
- Signature of Protocol::prepare_for_send() was changed: this operation
does not need a list of items, the number of items is fully sufficient.
The following backward incompatible changes have been made:
- CLIENT_MULTI_RESULTS is now enabled by default in the client;
- CLIENT_PS_MULTI_RESUTLS is now enabled by default in the client.
The value was changed from 1024 to 2048,
because 1024 is already used.
Original revision:
------------------------------------------------------------
revno: 2476.657.259
committer: tsmith@bk-internal.mysql.com
timestamp: Tue 2008-01-29 19:32:44 +0100
message:
WL#4098: Add a status flag for slow queries
Add new result set status flag SERVER_QUERY_WAS_SLOW in mysql_com.h.
There is no server-side implementation to actually set this flag at this
time. This patch simply defines the interface so that applications can
make use of it. See the worklog for background.
------------------------------------------------------------
------------------------------------------------------------
revno: 2476.657.208
committer: anozdrin/alik@station.
timestamp: Tue 2007-12-04 17:22:53 +0300
message:
Remove rpl_probe, enable_rpl_parse and disable_rpl_parse commands
from mysqltest, the corresponding funtctions have been removed from
MySQL C API
------------------------------------------------------------
revno: 2476.981.1
committer: msvensson@pilot.mysql.com
timestamp: Mon 2007-11-26 19:03:23 +0100
message:
Bug#31952 Remove undocumented mysql_rpl_* functions.
- Functions removed + variables in st_mysql and st_mysql_options
renamed to "unused".
- Code updated to work without those functions and variables
local storage for query cache).
We need more than one pointer in a thread to
represent the query cache and net->query_cache_query can not be used
any more (due to ABI compatibility issues and to different life
time of NET and THD).
This is a backport of the following patch from 6.0:
----------------------------------------------------------
revno: 2476.1157.2
committer: kostja@bodhi.(none)
timestamp: Sat 2007-06-16 13:29:24 +0400
"have_profiling"
1) Renamed have_community_features server system variable to
have_profiling.
2) Removed eable-community-features configure option and
ENABLE_COMMUNITY_FEATURES macro.
3) Removed COMMUNITY_SERVER macro and replaced its usage by
ENABLED_PROFILING.
Only --enable-profiling is now needed to enable profiling.
It was the only existing "community feature", so there was
no need for both configure options.
Using --enable-community-features will give a warning message
since it no longer exists.
given an already connected MYSQL handle
mysql_real_connect() did not check whether the MYSQL connection
handler was already connected and connected again even if so.
Now a CR_ALREADY_CONNECTED error is returned.
revno: 2476.785.24
committer: kostja@bodhi.(none)
timestamp: Tue 2007-10-16 20:19:00 +0400
message:
Reflect a rename of a member in the client ABI (a compatible change).
----------------------------------------------------------
revno: 2476.423.26
committer: kostja@bodhi.(none)
timestamp: Tue 2007-10-16 20:12:37 +0400
message:
Update the client ABI to reflect member rename
(this is a backward-compatible change).
----------------------------------------------------------
revno: 2476.785.22
committer: kostja@bodhi.(none)
timestamp: Tue 2007-10-16 19:37:25 +0400
message:
Remove some remains of support of 3.22 protocol. This was in fact dead code,
since the option to talk 3.22 protocol was removed in 4.1 and there
is no other protocol negotiation mechanism besides this option.
Options loaded from config files were added before command line
arguments, and they were parsed together, which could interprete
the following:
option-a
option-b
as --option-a=--option-b if 'option-a' requires a value, and
caused confusing.
Because all options that requires a value are always given in
the form '--option=value', so it's an error if there is no
'=value' part for such an option read from config file.
This patch added a separator to separate the arguments from
config files and that from command line, so that they can be
handled differently. And report an error for options loaded
from config files that requires a value and is not given in the
form '--option=value'.
http://lists.mysql.com/commits/59686
Cleanup pthread_self(), pthread_create(), pthread_join() implementation on Windows.
Prior implementation is was unnecessarily complicated and even differs in embedded
and non-embedded case.
Improvements in this patch:
* pthread_t is now the unique thread ID, instead of HANDLE returned by beginthread
This simplifies pthread_self() to be just straight GetCurrentThreadId().
prior it was much art involved in passing the beginthread() handle from the caller
to the TLS structure in the child thread ( did not work for the main thread of
course)
* remove MySQL specific my_thread_init()/my_thread_end() from pthread_create.
No automagic is done on Unix on pthread_create(). Having the same on Windows will
improve portability and avoid extra #ifdef's
* remove redefinition of getpid() - it was defined as GetCurrentThreadId()
DECIMAL and TIMESTAMP used to have NUM_FLAG, but NEWDECIMAL was forgotten.
It's correct that TIMESTAMP does not have the flag nowadays (manual will be updated, connectors
developers will be notified).
This patch provides performance improvements:
- send_fields() when character_set_results = latin1
is now about twice faster for column/table/database
names, consisting on ASCII characters.
Changes:
- Protocol doesn't use "convert" temporary buffer anymore,
and converts strings directly to "packet".
- General conversion optimization: quick conversion
of ASCII strings was added.
modified files:
include/m_ctype.h
- Adding a new flag.
- Adding a new function prototype
libmysqld/lib_sql.cc
- Adding quick conversion method for embedded library:
conversion is now done directly to result buffer,
without using a temporary buffer.
mysys/charset.c
- Mark all dynamic ucs2 character sets as non-ASCII
- Mark some dymamic 7bit and 8bit charsets as non-ASCII
(for example swe7 is not fully ASCII compatible).
sql/protocol.cc
- Adding quick method to convert a string directly
into protocol buffer, without using a temporary buffer.
sql/protocol.h
- Adding a new method prototype
sql/sql_string.cc
Optimization for conversion between two ASCII-compatible charsets:
- quickly convert ASCII strings,
switch to mc_wc->wc_mb method only when a non-ASCII character is met.
- copy four ASCII characters at once on i386
strings/conf_to_src.c
- Marking non-ASCII character sets with a flag.
strings/ctype-extra.c
- Regenerating ctype-extra.c by running "conf_to_src".
strings/ctype-uca.c
- Marking UCS2 character set as non-ASCII.
strings/ctype-ucs2.c
- Marking UCS2 character set as non-ASCII.
strings/ctype.c
- A new function to detect if a 7bit or 8bit character set
is ascii compatible.
htttp://lists.mysql.com/commits/50957?f=plain
Always use TLS functions instead of __declspec(thread) to access
thread local storage variables.
The change removes the necessity to recomplile the same source
files twice - with USE_TLS for DLLs and without USE_TLS for EXEs.
Real benefit of this change is better readability and maintainability
of TLS functions within MySQL.
There is a performance loss using TlsXXX functions compared to __declspec
but the difference is negligible in practice. In a sysbench-like benchmark
I ran with with TlsGetValue, pthread_[get|set]_specific was called 600000000
times and took 0.17sec of total 35min CPU time, or 0.008%.
Backport from 6.0 to 5.1.
Only those sync points are included, which are used in debug_sync.test.
The Debug Sync Facility allows to place synchronization points
in the code:
open_tables(...)
DEBUG_SYNC(thd, "after_open_tables");
lock_tables(...)
When activated, a sync point can
- Send a signal and/or
- Wait for a signal
Nomenclature:
- signal: A value of a global variable that persists
until overwritten by a new signal. The global
variable can also be seen as a "signal post"
or "flag mast". Then the signal is what is
attached to the "signal post" or "flag mast".
- send a signal: Assign the value (the signal) to the global
variable ("set a flag") and broadcast a
global condition to wake those waiting for
a signal.
- wait for a signal: Loop over waiting for the global condition until
the global value matches the wait-for signal.
Please find more information in the top comment in debug_sync.cc
or in the worklog entry.
NOTE: Backporting the patch to next-mr.
WL#4828 Augment DBUG_ENTER/DBUG_EXIT to crash MySQL in different functions
-------
The assessment of the replication code in the presence of faults is extremely
import to increase reliability. In particular, one needs to know if servers
will either correctly recovery or print out appropriate error messages thus
avoiding unexpected problems in a production environment.
In order to accomplish this, the current patch refactories the debug macros
already provided in the source code and introduces three new macros that
allows to inject faults, specifically crashes, while entering or exiting a
function or method. For instance, to crash a server while returning from
the init_slave function (see module sql/slave.cc), one needs to do what
follows:
1 - Modify the source replacing DBUG_RETURN by DBUG_CRASH_RETURN;
DBUG_CRASH_RETURN(0);
2 - Use the debug variable to activate dbug instructions:
SET SESSION debug="+d,init_slave_crash_return";
The new macros are briefly described below:
DBUG_CRASH_ENTER (function) is equivalent to DBUG_ENTER which registers the
beginning of a function but in addition to it allows for crashing the server
while entering the function if the appropriate dbug instruction is activate.
In this case, the dbug instruction should be "+d,function_crash_enter".
DBUG_CRASH_RETURN (value) is equivalent to DBUG_RETURN which notifies the
end of a function but in addition to it allows for crashing the server
while returning from the function if the appropriate dbug instruction is
activate. In this case, the dbug instruction should be
"+d,function_crash_return". Note that "function" should be the same string
used by either the DBUG_ENTER or DBUG_CRASH_ENTER.
DBUG_CRASH_VOID_RETURN (value) is equivalent to DBUG_VOID_RETURN which
notifies the end of a function but in addition to it allows for crashing
the server while returning from the function if the appropriate dbug
instruction is activate. In this case, the dbug instruction should be
"+d,function_crash_return". Note that "function" should be the same string
used by either the DBUG_ENTER or DBUG_CRASH_ENTER.
To inject other faults, for instance, wrong return values, one should rely
on the macros already available. The current patch also removes a set of
macros that were either not being used or were redundant as other macros
could be used to provide the same feature. In the future, we also consider
dynamic instrumentation of the code.
BUG#45747 DBUG_CRASH_* is not setting the strict option
---------
When combining DBUG_CRASH_* with "--debug=d:t:i:A,file" the server crashes
due to a call to the abort function in the DBUG_CRASH_* macro althought the
appropriate keyword has not been set.
Restore a stub of the removed mysql_odbc_escape_string function
to fix a ABI breakage. The function was intended to be private
and used only by Connector/ODBC, but, unfortunately, it was exported
as part of the ABI. Nonetheless, only a stub is restored as the
original function is inherently broken and shouldn't be used.
This restoration only applies to MySQL 5.0. This will be addressed
differently in later versions -- reworked library versioning.
Bug#24509 - 2048 file descriptor limit on windows needs increasing, also
WL#3049 - improved Windows I/O
The patch replaces the use of the POSIX I/O interfaces in mysys on Windows with
the Win32 API calls (CreateFile, WriteFile, etc). The Windows HANDLE for the open
file is stored in the my_file_info struct, along with a flag for append mode
because the Windows API does not support opening files in append mode in all cases)
The default max open files has been increased to 16384 and can be increased further
by setting --max-open-files=<value> during the server start.
Another major change in this patch that almost all Windows specific file IO code
has been moved to a new file my_winfile.c, greatly reducing the amount of code
in #ifdef blocks within mysys, thus improving readability.
Minor enhancements:
- my_(f)stat() is changed to use __stati64 structure with 64 file size
and timestamps. It will return correct file size now (C runtime implementation
used to report outdated information)
- my_lock on Windows is prepared to handle additional timeout parameter
- after review : changed __WIN__ to _WIN32 in the new and changed code.
can crash under load
Backport from 5.1.
Does also include key cache fixes from:
Bug 44068 (RESTORE can disable the MyISAM Key Cache)
Bug 40944 (Backup: crash after myisampack)
CREATE TABLE...LIKE...
The mysql server option 'sync_frm' is ignored when table is created with
syntax CREATE TABLE .. LIKE..
Fixed by adding the MY_SYNC flag and calling my_sync() from my_copy() when
the flag is set.
In mysql_create_table(), when the 'sync_frm' is set, MY_SYNC flag is passed
to my_copy().
Note: TestCase is not attached and can be tested manually using debugger.
with gcc 4.3.2
This patch fixes a number of GCC warnings about variables used
before initialized. A new macro UNINIT_VAR() is introduced for
use in the variable declaration, and LINT_INIT() usage will be
gradually deprecated. (A workaround is used for g++, pending a
patch for a g++ bug.)
GCC warnings for unused results (attribute warn_unused_result)
for a number of system calls (present at least in later
Ubuntus, where the usual void cast trick doesn't work) are
also fixed.
bzr branch mysql-5.1-performance-version mysql-trunk # Summit
cd mysql-trunk
bzr merge mysql-5.1-innodb_plugin # which is 5.1 + Innodb plugin
bzr rm innobase # remove the builtin
Next step: build, test fixes.
- Define and pass compile time path variables as pre-processor definitions to
mimic the makefile build.
- Set new CMake version and policy requirements explicitly.
- Changed DATADIR to MYSQL_DATADIR to avoid conflicting definition in
Platform SDK header ObjIdl.h which also defines DATADIR.
A REPLACE in the MERGE engine is actually a REPLACE
into one (FIRST or LAST) of the underlying MyISAM
tables. So in effect the server works on the meta
data of the MERGE table, while the real insert happens
in the MyISAM table.
The MERGE table has no index, while MyISAM has a
unique index. When a REPLACE into a MERGE table (
and the REPLACE conflicts with a duplicate in a
child table) is done, we try to access the duplicate
key information for the MERGE table. This information
actually does not exist, hence this results in a crash.
The problem can be resolved by modifying the MERGE
engine to provide us the duplicate key information
directly, instead of just returning the MyISAM index
number as the error key. Then the SQL layer (or "the
server") does not try to access the key_info of the
MERGE table, which does not exist.
The current patch modifies the MERGE engine to provide
the position for a record where a unique key violation
occurs.
not logged
Errors encountered during initialization of the SSL subsystem
are printed to stderr, rather than to the error log.
This patch adds a parameter to several SSL init functions to
report the error (if any) out to the caller. The function
init_ssl() in mysqld.cc is moved after the initialization of
the log subsystem, so that any error messages can be logged to
the error log. Printing of messages to stderr has been
retained to get diagnostic output in a client context.
it returns misleading 'table is full'
Innodb returns a misleading error message "table is full"
when the number of active concurrent transactions is greater
than 1024.
Fixed by adding errorcode "ER_TOO_MANY_CONCURRENT_TRXS" to the
error codes. Innodb should return HA_TOO_MANY_CONCURRENT_TRXS
to mysql which is then mapped to ER_TOO_MANY_CONCURRENT_TRXS
Note: testcase is not written as this was reproducible only by
changing innodb code.
Fixed the following problems:
1. cmake 2.6 warning because of a changed default on
how the dependencies to libraries with a specified
path are resolved.
Fixed by requiring cmake 2.6.
2. Removed an obsolete pre-NT4 hack including defining
Windows system defines to alter the behavior of windows.h.
3. Disabled warning C4065 on compiling sql_yacc.cc because
of a know incompatibility in some of the newer bison binaries.
and base tables
myrg_attach_children() could reuse a buffer that was allocated
previously based on a definition of a child table. The problem
was that the child's definition might have been changed, so
reusing the buffer could lead to crashes or valgrind errors
under some circumstances.
Fixed by changing myrg_attach_children() so that the
rec_per_key_part buffer is reused only when the child table
have not changed, and reallocated otherwise (the old buffer is
deallocated if necessary).
unnecessarily
The problem is that libmysqlclient.so is built with THREAD
undefined, while a client compiling against the same header
files will see THREAD as defined and definitions in
my_pthread.h will be included, possibly resulting in undefined
symbols that cannot be resolved with libmysqlclient.so.
The suggested solution is to require that clients wanting to
link with libmysqlclient.so should be built with
MYSQL_CLIENT_NO_THREADS defined. This requires a documentation
change, and more details for this will be supplied if this
patch is approved.
The MYSQL_CLIENT_NO_THREADS define was renamed from
UNDEF_THREADS_HACK, to get a more suitable (less suspicious)
name for the define. (The UNDEF_THREADS_HACK is retained for
backwards compatibility, though.)
This patch is also in anticipation of WL#4958, which will
remove this problem altogether by dropping the building of
libmysqlclient.
Failure to allocate memory for the hash->array element,
caused hash_init to return without initializing the other
members of the hash. Thus although the dynamic array
buffer may be allocated at a later point in the code, the
incompletely initialized hash caused fatal failures.
This patch moves the initialization of the other members
of the hash above the array allocation, so that the usage
of this hash will not result in fatal failures.
As described in the bug, the problem is not new in 5.4, but newly tickled.
We need a register whose lower 8 bits can be accessed, and must request
such from the assembler. Using a "q" constraint instead of "r" constraint
accomplishes this.
include/Makefile.am: use @PERL@ to call scripts/dheadgen.pl - don't rely on #! /usr/bin/perl
scripts/dheadgen.pl: use 2-arg open() for compatibility with older Perl versions
storage/innobase/srv/srv0srv.c: Don't use C++-style comments in C code
Bug#34309: '_PC' macro redefinition
For reasons that are now a mystery, we had defined a CPP symbol to
help ancient compilers work better (in some way that's lost to history).
This interferes with at least one modern compiler.
Now, don't define the _PC symbol. Those other underscore-leading
symbols are suspect also, but at least the names aren't inscrutable.
Let's leave them for now.
The problem was that new lock types were being added without a
corresponding description. Since the lock types (enum values)
are used as indices to the description array, the descriptions
could be shifted depending on the lock type. The solution is to
ensure that every lock type has a correspondent description.
produce incorrect results for ROUND()
Added a workaround and a configure check to test whether
isinf() is affected by the GCC bug #39228.
Since no code in MySQL server is currently affected by that
bug, the patch is actually a safeguard for possible future
code modifications. No test cases or changelog entries are
needed.
- Header <sys/ttydefaults.h> missing or not usable on QNX and OpenServer 6
include/my_global.h
- Moved down definition of function rint(), as for some platforms (in
this case Netware) 'longlong' is not defined until later in
"my_global.h"
Probe definition file is now a separate file that is copied during
build to the correct location, this enforces dependency requirements
correctly and allows builds to work when using the current or separate
build directories
Took the Xfree implementation (based on the same rewrite as the NDB one)
and added it instead of the current implementation.
Added a macro to make the calls to MD5 more streamlined.
When disk is full, server may waiting for free space while
writing binlog, relay-log or MyISAM tables. The server will
continue after user have freed some space. But the error
message printed was not quite clear about the how often the
error message is printed, and there will be a delay before
the server continue and user freeing space. And caused users
thinking that the server was hanging forever.
This patch fixed the problem by making the error messages
printed more clear. The error message is split into two part,
the first part will only be printed once, and the second part
will be printed very 10 times.
Message first part:
Disk is full writing '<filename>' (Errcode: <errorno>). Waiting
for someone to free space... (Expect up to 60 secs delay for
server to continue after freeing disk space)
Message second part:
Retry in 60 secs, Message reprinted in 600 secs
in load_defaults()
load_defaults(), my_search_option_files() and
my_print_default_files() utilized a global variable
containing a pointer to thread local memory. This could lead
to race conditions when those functions were called with high
concurrency.
Fixed by changing the interface of the said functions to avoid
the necessity for using a global variable.
Since we cannot change load_defaults() prototype for API
compatibility reasons, it was renamed my_load_defaults().
Now load_defaults() is a thread-unsafe wrapper around
a thread-safe version, my_load_defaults().
for bug #15936.
On some platforms fenv.h may #undef the min/max macros
defined in my_global.h.
Fixed by moving the #include directive for fenv.h from
mysqld.cc to my_global.h before definitions for min/max.
Add all HA error numbers and descriptions to perror.
Add reminder to header.
This is already fixed in smarter ways in future codebases, and this
codebase is unlikely to change, since new development is forbidden
here.
Improved data typing of server variables in InnoDB to avoid bugs on
Windows.
Workaround for bug in gcc assembler on 32-bit Mac OS X as well as
on Solaris.
Both of our own implementations of rint(3) were inconsistent with the
most common behavior of rint() on those platforms that have it: round
to nearest, break ties by rounding to nearest even.
Fixed by leaving just one implementation of rint() in our source tree,
and changing its behavior to match the most common native
implementations on other platforms.
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
code backported from 6.0
per-file messages:
include/my_global.h
Remove SC_MAXWIDTH. This is unused and irrelevant nowadays.
include/my_sys.h
Remove errbuf declaration and unused definitions.
mysys/my_error.c
Remove errbuf definition and move and adjust ERRMSGSIZE.
mysys/my_init.c
Declare buffer on the stack and use my_snprintf.
mysys/safemalloc.c
Use size explicitly. It's more than enough for the message at hand.
sql/sql_error.cc
Use size explicitly. It's more than enough for the message at hand.
sql/sql_parse.cc
Declare buffer on the stack. Use my_snprintf as it will result in
less stack space being used than by a system provided sprintf --
this allows us to put the buffer on the stack without causing much
trouble. Also, the use of errbuff here was not thread-safe as the
function can be entered concurrently from multiple threads.
sql/sql_table.cc
Use MYSQL_ERRMSG_SIZE. Extra space is not needed as my_snprintf will
nul terminate strings.
storage/myisam/ha_myisam.cc
Use MYSQL_ERRMSG_SIZE.
sql/share/errmsg.txt
Error message truncation in test "innodb" in embedded mode
filename in the error message can safely take up to 210 symbols.
upgrading lock, even with low_priority_updates
The problem is that there is no mechanism to control whether a
delayed insert takes a high or low priority lock on a table.
The solution is to modify the delayed insert thread ("handler")
to take into account the global value of low_priority_updates
when taking table locks. The value of low_priority_updates is
retrieved when the insert delayed thread is created and will
remain the same for the duration of the thread.
For reasons that are now a mystery, we had defined a CPP symbol to
help ancient compilers work better (in some way that's lost to history).
This interferes with at least one modern compiler.
Now, don't define the _PC symbol. Those other underscore-leading
symbols are suspect also, but at least the names aren't inscrutable.
Let's leave them for now.
myisam_repair_threads > 1 causes crash
Problem: parallel repair (myisam_repair_threads > 1) of a myisam
table with two or more fulltext keys that use the same parser may
lead to a server crash. ALTER TABLE ENABLE KEYS is affected as well.
Fix: properly initialize fulltext structures for parallel repair.
Note: 1. there's no deterministic test case.
2. now we call parser->init() for each fulltext key
(not for each fulltext parser used).
conflicts:
Text conflict in client/mysqltest.cc
Text conflict in mysql-test/include/wait_until_connected_again.inc
Text conflict in mysql-test/lib/mtr_report.pm
Text conflict in mysql-test/mysql-test-run.pl
Text conflict in mysql-test/r/events_bugs.result
Text conflict in mysql-test/r/log_state.result
Text conflict in mysql-test/r/myisam_data_pointer_size_func.result
Text conflict in mysql-test/r/mysqlcheck.result
Text conflict in mysql-test/r/query_cache.result
Text conflict in mysql-test/r/status.result
Text conflict in mysql-test/suite/binlog/r/binlog_index.result
Text conflict in mysql-test/suite/binlog/r/binlog_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_packet.result
Text conflict in mysql-test/suite/rpl/t/rpl_packet.test
Text conflict in mysql-test/t/disabled.def
Text conflict in mysql-test/t/events_bugs.test
Text conflict in mysql-test/t/log_state.test
Text conflict in mysql-test/t/myisam_data_pointer_size_func.test
Text conflict in mysql-test/t/mysqlcheck.test
Text conflict in mysql-test/t/query_cache.test
Text conflict in mysql-test/t/rpl_init_slave_func.test
Text conflict in mysql-test/t/status.test
Add #define HAVE_CHARSET_name in config-win.h for all character sets that MySQL
supports. Add comments to config/ac-macros/character_sets.m4 and config-win.h
so hopefully they will be updated in sync.
The MONTHNAME/DAYNAME functions
returns binary string, so the LOWER/UPPER functions
are not effective on the result of MONTHNAME/DAYNAME call.
Character set of the MONTHNAME/DAYNAME function
result has been changed to connection character set.
The problem here is that embedded server starts handle_thread manager
thread on mysql_library_init() does not stop it on mysql_library_end().
At shutdown, my_thread_global_end() waits for thread count to become 0,
but since we did not stop the thread it will give up after 5 seconds.
Solution is to move shutdown for handle_manager thread from kill_server()
(mysqld specific) to clean_up() that is used by both embedded and mysqld.
This patch also contains some refactorings - to avoid duplicate code,
start_handle_manager() and stop_handle_manager() functions are introduced.
Unused variables are eliminated. handle_manager does not rely on global
variable abort_loop anymore to stop (abort_loop is not set for embedded).
Note: Specifically on Windows and when using DBUG version of libmysqld,
the complete solution requires removing obsolete code my_thread_init()
from my_thread_var(). This has a side effect that a DBUG statement
after my_thread_end() can cause thread counter to be incremented, and
embedded will hang for some seconds. Or worse, my_thread_init() will
crash if critical sections have been deleted by the global cleanup
routine that runs in a different thread.
This patch also fixes and revert prior changes for Bug#38293
"Libmysqld crash in mysql_library_init if language file missing".
Root cause of the crash observed in Bug#38293 was bug in my_thread_init()
described above
bigint' fails on windows.
Visual Studio does not take into account some x86 hardware limitations
which leads to incorrect results when converting large DOUBLE values
to BIGINT UNSIGNED ones.
Fixed by adding a workaround for double->ulonglong conversion on
Windows.
That's a Win-specific error.
When we create libmysqld.dll we have many libraries like mysys, dbug,
strings, etc linked into that dll, so the application built upon
this library shouldn't link these libraries to itself, rather use
those inside the dll.
Fixed by redirecting calls into the libmysqld.dll
per-file comments:
dbug/dbug.c
Bug#38293 Libmysqld crash in mysql_library_init if language file missing
fake _db_something definitions added
include/my_dbug.h
Bug#38293 Libmysqld crash in mysql_library_init if language file missing
fake _db_something declarations added
libmysqld/examples/CMakeLists.txt
Bug#38293 Libmysqld crash in mysql_library_init if language file missing
superfluous libraries removed from linking
libmysqld/libmysqld.def
Bug#38293 Libmysqld crash in mysql_library_init if language file missing
set of mysys functions added to the export section
Several functions (mostly in mysqld.cc) directly call
exit() function in case of errors, which is not a desired
behaviour expecially in the embedded-server library.
Fixed by making these functions return error sign instead
of exiting.
per-file comments:
include/my_getopt.h
Bug#39289 libmysqld.a calls exit() upon error
added 'error' retvalue for my_getopt_register_get_addr
libmysqld/lib_sql.cc
Bug#39289 libmysqld.a calls exit() upon error
unireg_clear() function implemented
mysys/default.c
Bug#39289 libmysqld.a calls exit() upon error
error returned instead of exit() call
mysys/mf_tempdir.c
Bug#39289 libmysqld.a calls exit() upon error
free_tmpdir() - fixed so it's not produce crash on uninitialized
tmpdir structure
mysys/my_getopt.c
Bug#39289 libmysqld.a calls exit() upon error
error returned instead of exit() call
sql/mysql_priv.h
Bug#39289 libmysqld.a calls exit() upon error
unireg_abort definition fixed for the embedded server
sql/mysqld.cc
Bug#39289 libmysqld.a calls exit() upon error
various functions fixed
error returned instead of exit() call
The abi_check target instroduced as part of WL#4380 verifies
changes to mysql.h. mysql.h in turn includes mysql_version.h.
mysql_version.h is a file that is generated during the configure
phase. We must ensure that mysql_version.h is cleaned only during
distclean and not during clean.
The problem is that the function used by the server to increase
the thread's priority (pthread_setschedparam) has the unintended
side-effect of changing the calling thread scheduling policy,
possibly overwriting a scheduling policy set by a sysadmin.
The solution is to rely on the pthread_setschedprio function, if
available, as it only changes the scheduling priority and does not
change the scheduling policy. This function is usually available on
Solaris and Linux, but it use won't work by default on Linux as the
the default scheduling policy only accepts a static priority 0 -- this
is acceptable for now as priority changing on Linux is broken anyway.
The problem is that MySQL's 'fast' mutex implementation uses the
random() routine to determine the spin delay. Unfortunately, the
routine interface is not thead-safe and some implementations (eg:
glibc) might use a internal lock to protect the RNG state, causing
excessive locking contention if lots of threads are spinning on
a MySQL's 'fast' mutex. The code was also misusing the value
of the RAND_MAX macro, this macro represents the largest value
that can be returned from the rand() function, not random().
The solution is to use the quite simple Park-Miller random number
generator. The initial seed is set to 1 because the previously used
generator wasn't being seeded -- the initial seed is 1 if srandom()
is not called.
Futhermore, the 'fast' mutex implementation has several shortcomings
and provides no measurable performance benefit. Therefore, its use is
not recommended unless it provides directly measurable results.
This patch contains fixes for two problems:
1. As originally reported, the server crashed on Mac OS X when trying to access
an EXAMPLE table after the EXAMPLE plugin was installed.
It turned out that the dynamically loaded EXAMPLE plugin called the
function hash_earch() from a Mac OS X system library, instead of
hash_earch() from MySQL's mysys library. Makefile.am in storage/example
does not include libmysys. So the Mac OS X linker arranged the hash_search()
function to be linked to the system library when the shared object is
loaded.
One possible solution would be to include libmysys into the linkage of
dynamic plugins. But then we must have a libmysys.so, which must be
used by the server too. This could have a minimal performance impact,
but foremost the change seems to bee too risky at the current state of
MySQL 5.1.
The selected solution is to rename MySQL's hash_search() to my_hash_search()
like it has been done before with hash_insert() and hash_reset().
Since this is the third time, we need to rename a hash_*() function,
I did renamed all hash_*() functions to my_hash_*().
To avoid changing a zillion calls to these functions, and announcing
this to hundreds of developers, I added defines that map the old names
to the new names.
This change is in hash.h and hash.c.
2. The other problem was improper implementation of the handlerton-to-plugin
mapping. We use a fixed-size array to hold a plugin reference for each
handlerton. On every install of a handler plugin, we allocated a new slot
of the array. On uninstall we did not free it. After some uninstall/install
cycles the array overflowed. We did not check for overflow.
One fix is to check for overflow to stop the crashes.
Another fix is to free the array slot at uninstall and search for a free slot
at plugin install.
This change is in handler.cc.
The problem is that when statement-based replication was enabled,
statements such as INSERT INTO .. SELECT FROM .. and CREATE TABLE
.. SELECT FROM need to grab a read lock on the source table that
does not permit concurrent inserts, which would in turn be denied
if the source table is a log table because log tables can't be
locked exclusively.
The solution is to not take such a lock when the source table is
a log table as it is unsafe to replicate log tables under statement
based replication. Furthermore, the read lock that does not permits
concurrent inserts is now only taken if statement-based replication
is enabled and if the source table is not a log table.
test_if_data_home_dir fixed to look into real path.
Checks added to mi_open for symlinks into data home directory.
per-file messages:
include/my_sys.h
Bug#32167 another privilege bypass with DATA/INDEX DIRECTORY.
my_is_symlink interface added
include/myisam.h
Bug#32167 another privilege bypass with DATA/INDEX DIRECTORY.
myisam_test_invalid_symlink interface added
myisam/mi_check.c
Bug#32167 another privilege bypass with DATA/INDEX DIRECTORY.
mi_open_datafile calls modified
myisam/mi_open.c
Bug#32167 another privilege bypass with DATA/INDEX DIRECTORY.
code added to mi_open to check for symlinks into data home directory.
mi_open_datafile now accepts 'original' file path to check if it's
an allowed symlink.
myisam/mi_static.c
Bug#32167 another privilege bypass with DATA/INDEX DIRECTORY.
myisam_test_invlaid_symlink defined
myisam/myisamchk.c
Bug#32167 another privilege bypass with DATA/INDEX DIRECTORY.
mi_open_datafile call modified
myisam/myisamdef.h
Bug#32167 another privilege bypass with DATA/INDEX DIRECTORY.
mi_open_datafile interface modified - 'real_path' parameter added
mysql-test/r/symlink.test
Bug#32167 another privilege bypass with DATA/INDEX DIRECTORY.
error codes corrected as some patch now rejected pointing inside datahome
mysql-test/r/symlink.result
Bug#32167 another privilege bypass with DATA/INDEX DIRECTORY.
error messages corrected in the result
mysys/my_symlink.c
Bug#32167 another privilege bypass with DATA/INDEX DIRECTORY.
my_is_symlink() implementsd
my_realpath() now returns the 'realpath' even if a file isn't a symlink
sql/mysql_priv.h
Bug#32167 another privilege bypass with DATA/INDEX DIRECTORY.
test_if_data_home_dir interface
sql/mysqld.cc
Bug#32167 another privilege bypass with DATA/INDEX DIRECTORY.
myisam_test_invalid_symlik set with the 'test_if_data_home_dir'
sql/sql_parse.cc
Bug#32167 another privilege bypass with DATA/INDEX DIRECTORY.
error messages corrected
test_if_data_home_dir code fixed
1) Remove solaris sparc specific output produced by the
pre-processor in the .out files
2) Ensure compatibility of preprocessor options for solaris/sparc
platform.
test_if_data_home_dir fixed to look into real path.
Checks added to mi_open for symlinks into data home directory.
per-file messages:
include/my_sys.h
Bug#32167 another privilege bypass with DATA/INDEX DIRECTORY.
my_is_symlink interface added
mysql-test/r/udf.result
test result fixed (not related to #32167)
mysys/my_symlink.c
my_is_symlink() implementsd
my_realpath() now returns the 'realpath' even if a file isn't a symlink
1) Modified abi_check rule to not write into the
distribution directory.
2) Added the .pp files to EXTRA_DIST so that it will
be included in the distribution
Pull out some of unpack_dirname() into normalize_dirname(); this
new function does not expand "~" to the home directory. Use this
function in unpack_dirname(), and use it during init_default_directories()
to remove duplicate entries without losing track of which directory
is a user's home dir.
Another problem is that the backtrace facility wasn't being
enabled for non-Linux targets even if the target OS has the
backtrace functions. Also, the stacktrace functions inside
mysqltest were being used without proper checks for their
presence in the build.
The problem was that when a embedded linked version of mysqltest
crashed there was no way to obtain a stack trace if no core file
is available. Another problem is that the embedded version of
libmysql was not behaving (crash) the same as the non-embedded with
respect to sending commands to a explicitly closed connection.
The solution is to generate a mysqltest's stack trace on crash
and to enable "reconnect" if the connection handle was explicitly
closed so the behavior matches the non-embedded one.
added a rule that use gcc to generate preprocessor output (gcc -E)
that can be then compared to a already generated output using
the diff utility.
Ran make test on the repository to verify changes.
PREPARE", review fixes:
- make the patch follow the specification of WL#4166 and remove
the new error that was originally introduced.
Now the client never gets an error from reprepare, unless it failed.
I.e. even if the statement at hand returns a completely different
result set, this is not considered a server error.
The C API library, that can not handle this situation, was modified to
return a client error.
Added additional test coverage.
for ENGINE=MRG_MYISAM (should be optimized out).
Before WL#3281 MERGE engine had the HA_NOT_EXACT_COUNT flag
unset, and it worked with COUNT optimization as desired.
After the removal of the HA_NOT_EXACT_COUNT flag neither
HA_STATS_RECORDS_IS_EXACT (opposite to former HA_NOT_EXACT_COUNT
flag) nor modern HA_HAS_RECORDS flag were not added to MERGE
table flag mask.
1. The HA_HAS_RECORDS table flag has been set.
2. The ha_myisammrg::records method has been overridden to
calculate total number of records in underlying tables.
WL#4165 Prepared statements: validation
WL#4166 Prepared statements: automatic re-prepare
Fixes
Bug#27430 Crash in subquery code when in PS and table DDL changed after PREPARE
Bug#27690 Re-execution of prepared statement after table was replaced with a view crashes
Bug#27420 A combination of PS and view operations cause error + assertion on shutdown
The basic idea of the patch is to keep track of table metadata between
prepared statement prepare and execute. If some table used in the statement
has changed, the prepared statement is re-prepared before execution.
See WL#4165 and WL#4166 contents and comments in the code for details
of the implementation.
When linking with some external programs, "multiple definition
of `init_time'"
Rename init_time() to my_init_time() to avoid collision with other
libraries (particularly libmng).
The server used to trust blindly information from the client about
its capabilities. During the connection handshake the server sends
information about what it supports and then the client sends back a
set of capabilities which cover all of the server's or less.
Before this changeset the server didn't check whether the flags sent
by the client were valid for the server. For example, if the server
doesn't support compressed protocol but the client does and sends that
bit turned on, the server didn't check it. The change make the server code
less error prone to problems related to the value of THD::client_capabilities.
Clearly there is no vulnerability being fixed but this is a maintainenance
fix to prevent misusage in the future.
The bool data type was redefined to BOOL (4 bytes on windows).
Removed the #define and fixed some of the warnings that were uncovered
by this.
Note that the fix also disables 2 warnings :
4800 : 'type' : forcing value to bool 'true' or 'false' (performance warning)
4805: 'operation' : unsafe mix of type 'type' and type 'type' in operation
These warnings will be handled in a separate bug, as they are performance related or bogus.
Fixed to int the return type of functions that return more than
2 distinct values.
The problem is that unimplemented WIN32 version of pthread_kill
is returning ESRCH no matter the arguments, causing calls to
mysqld_list_processes to set the procinfo to dead because
pthread_kill returns non zero. The dead procinfo would show
up on a second invocation of show processlist.
