timestamp primary key
Since TIMESTAMP values are adjusted by the current time zone
settings in both numeric and string contexts, using any
expressions involving TIMESTAMP values as a
(sub)partitioning function leads to undeterministic behavior of
partitioned tables. The effect may vary depending on a storage
engine, it can be either incorrect data being retrieved or
stored, or an assertion failure. The root cause of this is the
fact that the calculated partition ID may differ from a
previously calculated ID for the same data due to timezone
adjustments of the partitioning expression value.
Fixed by disabling any expressions involving TIMESTAMP values
to be used in partitioning functions with the follwing two
exceptions:
1. Creating or altering into a partitioned table that violates
the above rule is not allowed, but opening existing such tables
results in a warning rather than an error so that such tables
could be fixed.
2. UNIX_TIMESTAMP() is the only way to get a
timezone-independent value from a TIMESTAMP column, because it
returns the internal representation (a time_t value) of a
TIMESTAMP argument verbatim. So UNIX_TIMESTAMP(timestamp_column)
is allowed and should be used to fix existing tables if one
wants to use TIMESTAMP columns with partitioning.
Bug#42546 Backup: RESTORE fails, thinking it finds an existing table
The problem occured when a MDL locking conflict happened for a non-existent
table between a CREATE and a INSERT statement. The code for CREATE
interpreted this lock conflict to mean that the table existed,
which meant that the statement failed when it should not have.
The problem could occur for CREATE TABLE, CREATE TABLE LIKE and
ALTER TABLE RENAME.
This patch fixes the problem for CREATE TABLE and CREATE TABLE LIKE.
It is based on code backported from the mysql-6.1-fk tree written
by Dmitry Lenev. CREATE now uses normal open_and_lock_tables() code
to acquire exclusive locks. This means that for the test case in the bug
description, CREATE will wait until INSERT completes so that it can
get the exclusive lock. This resolves the reported bug.
The patch also prohibits CREATE TABLE and CREATE TABLE LIKE under
LOCK TABLES. Note that this is an incompatible change and must
be reflected in the documentation. Affected test cases have been
updated.
mdl_sync.test contains tests for CREATE TABLE and CREATE TABLE LIKE.
Fixing the issue for ALTER TABLE RENAME is beyond the scope of this
patch. ALTER TABLE cannot be prohibited from working under LOCK TABLES
as this could seriously impact customers and a proper fix would require
a significant rewrite.
SPATIAL and FULLTEXT indexes don't support algorithm
selection.
Disabled by creating a special grammar rule for these
in the parser.
Added some encasulation of duplicate parser code.
------------------------------------------------------------
revno: 2617.68.25
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-next-bg-pre2-2
timestamp: Wed 2009-09-16 18:26:50 +0400
message:
Follow-up for one of pre-requisite patches for fixing bug #30977
"Concurrent statement using stored function and DROP FUNCTION
breaks SBR".
Made enum_mdl_namespace enum part of MDL_key class and removed MDL_
prefix from the names of enum members. In order to do the latter
changed name of PROCEDURE symbol to PROCEDURE_SYM (otherwise macro
which was automatically generated for this symbol conflicted with
MDL_key::PROCEDURE enum member).
----------------------------------------------------------
revno: 2617.69.24
committer: Konstantin Osipov <kostja@sun.com>
branch nick: 5.4-42546
timestamp: Fri 2009-08-14 19:22:05 +0400
message:
A pre-requisite for a fix for Bug#42546 "Backup: RESTORE fails, thinking it
finds an existing table"
Back-port from WL 148 "Foreign keys" feature tree a patch
that introduced Prelocking_strategy class -- a way to parameterize
open_tables() behaviour, implemented by Dmitry Lenev.
(Part of WL#4284).
Support for flushing individual logs, so that the user can
selectively flush a subset of the server logs.
Flush of individual logs is done according to the
following syntax:
FLUSH <log_category> LOGS;
The syntax is extended so that the user is able to flush a
subset of logs:
FLUSH [log_category LOGS,];
where log_category is one of:
SLOW
ERROR
BINARY
ENGINE
GENERAL
RELAY.
Text conflict in mysql-test/collections/default.experimental
Text conflict in mysql-test/r/show_check.result
Text conflict in mysql-test/r/sp-code.result
Text conflict in mysql-test/suite/binlog/r/binlog_tmp_table.result
Text conflict in mysql-test/suite/rpl/t/disabled.def
Text conflict in mysql-test/t/show_check.test
Text conflict in mysys/my_delete.c
Text conflict in sql/item.h
Text conflict in sql/item_cmpfunc.h
Text conflict in sql/log.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/repl_failsafe.cc
Text conflict in sql/slave.cc
Text conflict in sql/sql_parse.cc
Text conflict in sql/sql_table.cc
Text conflict in sql/sql_yacc.yy
Text conflict in storage/myisam/ha_myisam.cc
Corrected results for
stm_auto_increment_bug33029.reject 2009-12-01
20:01:49.000000000 +0300
<andrei> @@ -42,9 +42,6 @@
<andrei> RETURN i;
<andrei> END//
<andrei> CALL p1();
<andrei> -Warnings:
<andrei> -Note 1592 Statement may not be safe to log in statement
format.
<andrei> -Note 1592 Statement may not be safe to log in statement
format.
There should be indeed no Note present because there is in fact autoincrement
top-level query in sp() that triggers inserting in yet another auto-inc table.
(todo: alert DaoGang to improve the test).
Problem: Some system functions that could return different values on
master and slave were not marked unsafe. In particular:
GET_LOCK
IS_FREE_LOCK
IS_USED_LOCK
MASTER_POS_WAIT
RELEASE_LOCK
SLEEP
SYSDATE
VERSION
Fix: Mark these functions unsafe.
This patch borrows ideas, text and code from Kristofer
Pettersson's patch.
An assignment of a system variable sharing the same base
name as a declared stored procedure variable in the same
context could lead to a crash.
The reason was that during the parsing of the syntactic
rule 'option_value' an uninitialized set_var object was
pushed to the parameter stack of the SET statement. The
parent rule 'option_type_value' interpreted the existence
of variables on the parameter stack as an assignment and
wrapped it in a sp_instr_set object.
As the procedure later was executed an attempt was made
to run the method 'check()' on an uninitialized member
object (NULL value) belonging to the previously created
but uninitialized object.
This patch refactors the 'internal_variable_name' rule and
copies the semantic analysis part to the depending parent
rule: 'option_value'. This makes it possible to account
for any prefixes affecting the interpretation of the
internal_variable_name.
------------------------------------------------------------
revno: 2476.784.4
revision-id: sp1r-davi@moksha.local-20071008114751-46069
parent: sp1r-davi@moksha.local-20071003002731-48537
committer: davi@moksha.local
timestamp: Mon 2007-10-08 08:47:51 -0300
message:
Bug#27249 table_wild with alias: select t1.* as something
Aliases to table wildcards are silently ignored, but they should
not be allowed as it is non-standard and currently useless. There
is not point in having a alias to a wildcard of column names.
The solution is to rewrite the select_item rule so that aliases
for table wildcards are not accepted.
Contribution by Martin Friebe
------------------------------------------------------------
revno: 2572.2.1
revision-id: sp1r-davi@mysql.com/endora.local-20080227225948-16317
parent: sp1r-anozdrin/alik@quad.-20080226165712-10409
committer: davi@mysql.com/endora.local
timestamp: Wed 2008-02-27 19:59:48 -0300
message:
Bug#27525 table not found when using multi-table-deletes with aliases over several databas
Bug#30234 Unexpected behavior using DELETE with AS and USING
The multi-delete statement has a documented limitation that
cross-database multiple-table deletes using aliases are not
supported because it fails to find the tables by alias if it
belongs to a different database. The problem is that when
building the list of tables to delete from, if a database
name is not specified (maybe an alias) it defaults to the
name of the current selected database, making impossible to
to properly resolve tables by alias later. Another problem
is a inconsistency of the multiple table delete syntax that
permits ambiguities in a delete statement (aliases that refer
to multiple different tables or vice-versa).
The first step for a solution and proper implementation of
the cross-databse multiple table delete is to get rid of any
ambiguities in a multiple table statement. Currently, the parser
is accepting multiple table delete statements that have no obvious
meaning, such as:
DELETE a1 FROM db1.t1 AS a1, db2.t2 AS a1;
DELETE a1 AS a1 FROM db1.t1 AS a1, db2.t2 AS a1;
The solution is to resolve the left part of a delete statement
using the right part, if the a table on right has an alias,
it must be referenced in the left using the given alias. Also,
each table on the left side must match unambiguously only one
table in the right side.
mysql-next-mr-bugfixing.
Bug no 32858 was fixed in two different ways in what was
then called mysql 5.1 and 6.0. The fix in 6.0 was very
different since bugfix no 33204 was present. Furthermore,
the two fixes were not compatible. Hence in order to
backport Bug#33204 to the 5.1-based mysql-next-mr-bugfixing,
it was necessary to remove the 5.1 fix of 32858 and apply
the 6.0 version of the fix.
# Bug#24690 Stored functions: RETURNing UTF8 strings
# do not return UTF8_UNICODE_CI collation
#
# Bug#17903: cast to char results in binary
# Regression. The character set was not being properly initialized
# for CAST() with a type like CHAR(2) BINARY, which resulted in
# incorrect results or even a server crash.
#
Backporting from mysql-6.0-codebase.
mysql-test/r/sp-ucs2.result:
mysql-test/t/sp-ucs2.test:
Adding tests
sql/mysql_priv.h:
Adding prototype
sql/sp.cc
Remember COLLATE clause for non-default collations
sql/sql_parse.cc
Adding a new helper function
sql/sql_yacc.yy
- Allow "CHARACTER SET cs COLLATE cl" in
SP parameters, RETURNS, DECLARE
- Minor reorganization for "ASCII" and "UNICODE"
related rules, to make the code more readable,
also to allow these aliases:
* "VARCHAR(10) ASCII BINARY" -> CHARACTER SET latin1 COLLATE latin1_bin
* "VARCHAR(10) BINARY ASCII" -> CHARACTER SET latin1 COLLATE latin1_bin
* "VARCHAR(10) UNICODE BINARY" -> CHARACTER SET ucs2 COLLATE ucs2_bin
* "VARCHAR(10) BINARY UNICODE" -> CHARACTER SET ucs2 COLLATE ucs2_bin
Previously these four aliases returned the error
"This version of MySQL does not yet support return value collation".
Note:
This patch allows "VARCHAR(10) CHARACTER SET cs COLLATE cl"
and the above four aliases.
"VARCHAR(10) COLLATE cl" is still not allowed
i.e. when COLLATE is given without CHARACTER SET.
If we want to support this, we need an architecture decision
which character set to use by default.
Backport for 5.5
The root cause of this bug is that the grammar for GROUP BY clauses,
when using WITH CUBE or WITH ROLLUP, cause conflicts with the grammar
for VIEW, when using WITH CHECK OPTION.
The solution is to implement two token look ahead when parsing a WITH token,
to disambiguate the non standard WITH CUBE and WITH ROLLUP syntaxes.
Patch based on code from Marc Alff and Antony Curtis
having clause...
The fix for bug 46184 was not very complete. It was not covering
views using temporary tables and multiple tables in a FROM clause.
Fixed by reverting the fix for 46184 and making a more general
check that is checking at the right execution stage and for all
of the non-supported cases.
Now PROCEDURE ANALYZE on non-top level SELECT is also forbidden.
Updated the analyse.test and subselect.test accordingly.
Backport for 5.5
In non debug builds, the statements:
- SHOW PROCEDURE CODE
- SHOW FUNCTION CODE
used to fail with a "syntax error", which is misleading.
These statements have been changed to return the following error for non
debug builds:
ERROR HY000: The 'SHOW PROCEDURE|FUNCTION CODE' feature is disabled; you
need MySQL built with '--with-debug' to have it working
For debug builds (./configure --with-debug), nothing is changed.
Item_sum::set_aggregator() may be called multiple times during query preparation.
On subsequent calls: verify that the aggregator type is the same,
and re-use the existing Aggregator.
