Shared variables of Delayed_insert may be updated without mutex protection
when delayed insert thread gets an error.
Re-acquire mutex earlier, so that shared variables are protected.
Problem was that notify_shared_lock() didn't abort an insert delayed thread
if it was in thr_upgrade_write_delay_lock().
ALTER TABLE first takes a weak_mdl_lock, then a thr_lock and then tries to upgrade
the mdl_lock.
Delayed insert thread first takes a mdl lock followed by a
thr_upgrade_write_delay_lock()
This caused insert delay to wait for alter table in thr_lock, while
alter table was waiting for the mdl lock by insert delay.
Fixed by telling mdl to run thr_lock_abort() for the insert delay thread table.
We also set thd->mysys_var->abort to 1 for the delay thread when it's killed
by alter table to ensure it doesn't ever get locked in thr_lock.
There was a race condition between delayed insert thread and connection thread
actually performing INSERT/REPLACE DELAYED. It was triggered by concurrent
INSERT/REPLACE DELAYED and statements that flush the same table either
explicitely or implicitely (like FLUSH TABLE, ALTER TABLE, ...).
This race condition was caused by a gap in delayed thread shutdown logic,
which allowed concurrent connection running INSERT/REPLACE DELAYED to change
essential data consequently leaving table in semi-consistent state.
Specifically query thread could decrease "tables_in_use" reference counter in
this gap, causing delayed insert thread to shutdown without releasing auto
increment and table lock.
Fixed by extending condition so that delayed insert thread won't shutdown
until there're locked tables.
Also removed volatile qualifier from tables_in_use and stacked_inserts since
they're supposed to be protected by mutexes.
1. the same message text for INSERT and INSERT IGNORE
2. no new warnings in UPDATE IGNORE yet (big change for 5.5)
and replace a commonly used expression with a
named constant
CONSTRAINT.
Analysis
=======
INSERT and UPDATE operations using the IGNORE keyword which
causes FOREIGN KEY constraint violations reports an error
despite using the IGNORE keyword.
Foreign key violation errors were not ignored and reported
as errors instead of warnings even when IGNORE was set.
Fix
===
Added code to ignore the foreign key violation errors and
report them as warnings when the IGNORE keyword is used.
Problem was that created table was not marked as used (not set query_id) and so opening tables for stored function pick it up (as opened place holder for it) and used changing TABLE internals.
CONVERT_CHARSET_PARTITION_CONSTANT:
SQL/SQL_PARTITION..CC:202
Issue:
-----
This problem happens under the following conditions:
1) A table partitioned with a character column as the key.
2) The expressions specified in the partition definition
requires a charset conversion. This can happen when the
server's default collation is different from the
expression's collation.
3) INSERT DELAYED is used to insert data into the table.
SOLUTION:
---------
While creating the delayed_insert object, initialize it
with the relevant select_lex.
send_result_set_metadata
Analysis
--------
Cursor inside trigger accessing NEW/OLD row leads server exit.
The reason for the bug was that implementation of function
create_tmp_table() was not considering Item::TRIGGER_FIELD_ITEM
as possible alternative for type of class being instantiated.
This was resulting in a mismatch between a number of columns
in result list and temp table definition. This mismatch leads
to the failure of assertion
DBUG_ASSERT(send_result_set_metadata.elements == item_list.elements)
in the method Materialized_cursor::send_result_set_metadata
in debug mode.
Fix:
---
Added code to consider Item::TRIGGER_FIELD_ITEM as valid
type while creating fields.
Call mysql_derived_reinit() if we are reusing view.
This is needed as during a previous error condition the view may not have been reset
sql/sql_derived.cc:
More DBUG_PRINT
Always reset merged_for_insert (no reason to not do that)
sql/sql_derived.h:
Added prototype
sql/sql_insert.cc:
More DBUG_PRINT
Added DBUG_ASSERT
sql/sql_view.cc:
Call mysql_derived_reinit() if we are reusing view.
This is needed as during a previous error condition the view may not have been reset
sql/table.cc:
More DBUG_PRINT
when restoring auto-inc value in INSERT ... ON DUPLICATE KEY UPDATE, take into account that
1. it may be changed in the UPDATE clause (old code did that)
2. it may be changed in the INSERT clause and then cause a dup key (old code missed that)
reset default fields not for every modified row, but only once,
at the beginning, as the set of modified fields doesn't change.
exception: INSERT ... ON DUPLICATE KEY UPDATE - the set of fields
does change per row and in that case we reset default fields per row.
The reason for the failure was a bug in an include file on debian that causes 'struct stat'
to have different sized depending on the environment.
This patch fixes so that we always include my_global.h or my_config.h before we include any other files.
Other things:
- Removed #include <my_global.h> in some include files; Better to always do this at the top level to have as few
"always-include-this-file-first' files as possible.
- Removed usage of some include files that where already included by my_global.h or by other files.
client/mysql_plugin.c:
Use my_global.h first
client/mysqlslap.c:
Remove duplicated include files
extra/comp_err.c:
Remove duplicated include files
include/m_string.h:
Remove duplicated include files
include/maria.h:
Remove duplicated include files
libmysqld/emb_qcache.cc:
Use my_global.h first
plugin/semisync/semisync.h:
Use my_pthread.h first
sql/datadict.cc:
Use my_global.h first
sql/debug_sync.cc:
Use my_global.h first
sql/derror.cc:
Use my_global.h first
sql/des_key_file.cc:
Use my_global.h first
sql/discover.cc:
Use my_global.h first
sql/event_data_objects.cc:
Use my_global.h first
sql/event_db_repository.cc:
Use my_global.h first
sql/event_parse_data.cc:
Use my_global.h first
sql/event_queue.cc:
Use my_global.h first
sql/event_scheduler.cc:
Use my_global.h first
sql/events.cc:
Use my_global.h first
sql/field.cc:
Use my_global.h first
Remove duplicated include files
sql/field_conv.cc:
Use my_global.h first
sql/filesort.cc:
Use my_global.h first
Remove duplicated include files
sql/gstream.cc:
Use my_global.h first
sql/ha_ndbcluster.cc:
Use my_global.h first
sql/ha_ndbcluster_binlog.cc:
Use my_global.h first
sql/ha_ndbcluster_cond.cc:
Use my_global.h first
sql/ha_partition.cc:
Use my_global.h first
sql/handler.cc:
Use my_global.h first
sql/hash_filo.cc:
Use my_global.h first
sql/hostname.cc:
Use my_global.h first
sql/init.cc:
Use my_global.h first
sql/item.cc:
Use my_global.h first
sql/item_buff.cc:
Use my_global.h first
sql/item_cmpfunc.cc:
Use my_global.h first
sql/item_create.cc:
Use my_global.h first
sql/item_geofunc.cc:
Use my_global.h first
sql/item_inetfunc.cc:
Use my_global.h first
sql/item_row.cc:
Use my_global.h first
sql/item_strfunc.cc:
Use my_global.h first
sql/item_subselect.cc:
Use my_global.h first
sql/item_sum.cc:
Use my_global.h first
sql/item_timefunc.cc:
Use my_global.h first
sql/item_xmlfunc.cc:
Use my_global.h first
sql/key.cc:
Use my_global.h first
sql/lock.cc:
Use my_global.h first
sql/log.cc:
Use my_global.h first
sql/log_event.cc:
Use my_global.h first
sql/log_event_old.cc:
Use my_global.h first
sql/mf_iocache.cc:
Use my_global.h first
sql/mysql_install_db.cc:
Remove duplicated include files
sql/mysqld.cc:
Remove duplicated include files
sql/net_serv.cc:
Remove duplicated include files
sql/opt_range.cc:
Use my_global.h first
sql/opt_subselect.cc:
Use my_global.h first
sql/opt_sum.cc:
Use my_global.h first
sql/parse_file.cc:
Use my_global.h first
sql/partition_info.cc:
Use my_global.h first
sql/procedure.cc:
Use my_global.h first
sql/protocol.cc:
Use my_global.h first
sql/records.cc:
Use my_global.h first
sql/records.h:
Don't include my_global.h
Better to do this at the upper level
sql/repl_failsafe.cc:
Use my_global.h first
sql/rpl_filter.cc:
Use my_global.h first
sql/rpl_gtid.cc:
Use my_global.h first
sql/rpl_handler.cc:
Use my_global.h first
sql/rpl_injector.cc:
Use my_global.h first
sql/rpl_record.cc:
Use my_global.h first
sql/rpl_record_old.cc:
Use my_global.h first
sql/rpl_reporting.cc:
Use my_global.h first
sql/rpl_rli.cc:
Use my_global.h first
sql/rpl_tblmap.cc:
Use my_global.h first
sql/rpl_utility.cc:
Use my_global.h first
sql/set_var.cc:
Added comment
sql/slave.cc:
Use my_global.h first
sql/sp.cc:
Use my_global.h first
sql/sp_cache.cc:
Use my_global.h first
sql/sp_head.cc:
Use my_global.h first
sql/sp_pcontext.cc:
Use my_global.h first
sql/sp_rcontext.cc:
Use my_global.h first
sql/spatial.cc:
Use my_global.h first
sql/sql_acl.cc:
Use my_global.h first
sql/sql_admin.cc:
Use my_global.h first
sql/sql_analyse.cc:
Use my_global.h first
sql/sql_audit.cc:
Use my_global.h first
sql/sql_base.cc:
Use my_global.h first
sql/sql_binlog.cc:
Use my_global.h first
sql/sql_bootstrap.cc:
Use my_global.h first
Use my_global.h first
sql/sql_cache.cc:
Use my_global.h first
sql/sql_class.cc:
Use my_global.h first
sql/sql_client.cc:
Use my_global.h first
sql/sql_connect.cc:
Use my_global.h first
sql/sql_crypt.cc:
Use my_global.h first
sql/sql_cursor.cc:
Use my_global.h first
sql/sql_db.cc:
Use my_global.h first
sql/sql_delete.cc:
Use my_global.h first
sql/sql_derived.cc:
Use my_global.h first
sql/sql_do.cc:
Use my_global.h first
sql/sql_error.cc:
Use my_global.h first
sql/sql_explain.cc:
Use my_global.h first
sql/sql_expression_cache.cc:
Use my_global.h first
sql/sql_handler.cc:
Use my_global.h first
sql/sql_help.cc:
Use my_global.h first
sql/sql_insert.cc:
Use my_global.h first
sql/sql_lex.cc:
Use my_global.h first
sql/sql_load.cc:
Use my_global.h first
sql/sql_locale.cc:
Use my_global.h first
sql/sql_manager.cc:
Use my_global.h first
sql/sql_parse.cc:
Use my_global.h first
sql/sql_partition.cc:
Use my_global.h first
sql/sql_plugin.cc:
Added comment
sql/sql_prepare.cc:
Use my_global.h first
sql/sql_priv.h:
Added error if we use this before including my_global.h
This check is here becasue so many files includes sql_priv.h first.
sql/sql_profile.cc:
Use my_global.h first
sql/sql_reload.cc:
Use my_global.h first
sql/sql_rename.cc:
Use my_global.h first
sql/sql_repl.cc:
Use my_global.h first
sql/sql_select.cc:
Use my_global.h first
sql/sql_servers.cc:
Use my_global.h first
sql/sql_show.cc:
Added comment
sql/sql_signal.cc:
Use my_global.h first
sql/sql_statistics.cc:
Use my_global.h first
sql/sql_table.cc:
Use my_global.h first
sql/sql_tablespace.cc:
Use my_global.h first
sql/sql_test.cc:
Use my_global.h first
sql/sql_time.cc:
Use my_global.h first
sql/sql_trigger.cc:
Use my_global.h first
sql/sql_udf.cc:
Use my_global.h first
sql/sql_union.cc:
Use my_global.h first
sql/sql_update.cc:
Use my_global.h first
sql/sql_view.cc:
Use my_global.h first
sql/sys_vars.cc:
Added comment
sql/table.cc:
Use my_global.h first
sql/thr_malloc.cc:
Use my_global.h first
sql/transaction.cc:
Use my_global.h first
sql/uniques.cc:
Use my_global.h first
sql/unireg.cc:
Use my_global.h first
sql/unireg.h:
Removed inclusion of my_global.h
storage/archive/ha_archive.cc:
Added comment
storage/blackhole/ha_blackhole.cc:
Use my_global.h first
storage/csv/ha_tina.cc:
Use my_global.h first
storage/csv/transparent_file.cc:
Use my_global.h first
storage/federated/ha_federated.cc:
Use my_global.h first
storage/federatedx/federatedx_io.cc:
Use my_global.h first
storage/federatedx/federatedx_io_mysql.cc:
Use my_global.h first
storage/federatedx/federatedx_io_null.cc:
Use my_global.h first
storage/federatedx/federatedx_txn.cc:
Use my_global.h first
storage/heap/ha_heap.cc:
Use my_global.h first
storage/innobase/handler/handler0alter.cc:
Use my_global.h first
storage/maria/ha_maria.cc:
Use my_global.h first
storage/maria/unittest/ma_maria_log_cleanup.c:
Remove duplicated include files
storage/maria/unittest/test_file.c:
Added comment
storage/myisam/ha_myisam.cc:
Move sql_plugin.h first as this includes my_global.h
storage/myisammrg/ha_myisammrg.cc:
Use my_global.h first
storage/oqgraph/oqgraph_thunk.cc:
Use my_config.h and my_global.h first
One could not include my_global.h before oqgraph_thunk.h (don't know why)
storage/spider/ha_spider.cc:
Use my_global.h first
storage/spider/hs_client/config.cpp:
Use my_global.h first
storage/spider/hs_client/escape.cpp:
Use my_global.h first
storage/spider/hs_client/fatal.cpp:
Use my_global.h first
storage/spider/hs_client/hstcpcli.cpp:
Use my_global.h first
storage/spider/hs_client/socket.cpp:
Use my_global.h first
storage/spider/hs_client/string_util.cpp:
Use my_global.h first
storage/spider/spd_conn.cc:
Use my_global.h first
storage/spider/spd_copy_tables.cc:
Use my_global.h first
storage/spider/spd_db_conn.cc:
Use my_global.h first
storage/spider/spd_db_handlersocket.cc:
Use my_global.h first
storage/spider/spd_db_mysql.cc:
Use my_global.h first
storage/spider/spd_db_oracle.cc:
Use my_global.h first
storage/spider/spd_direct_sql.cc:
Use my_global.h first
storage/spider/spd_i_s.cc:
Use my_global.h first
storage/spider/spd_malloc.cc:
Use my_global.h first
storage/spider/spd_param.cc:
Use my_global.h first
storage/spider/spd_ping_table.cc:
Use my_global.h first
storage/spider/spd_sys_table.cc:
Use my_global.h first
storage/spider/spd_table.cc:
Use my_global.h first
storage/spider/spd_trx.cc:
Use my_global.h first
storage/xtradb/handler/handler0alter.cc:
Use my_global.h first
storage/xtradb/handler/i_s.cc:
Use my_global.h first
~40% bugfixed(*) applied
~40$ bugfixed reverted (incorrect or we're not buggy)
~20% bugfixed applied, despite us being not buggy
(*) only changes in the server code, e.g. not cmakefiles
SHOW PROCESSLIST, SHOW BINLOGS
Problem: A deadlock was occurring when 4 threads were
involved in acquiring locks in the following way
Thread 1: Dump thread ( Slave is reconnecting, so on
Master, a new dump thread is trying kill
zombie dump threads. It acquired thread's
LOCK_thd_data and it is about to acquire
mysys_var->current_mutex ( which LOCK_log)
Thread 2: Application thread is executing show binlogs and
acquired LOCK_log and it is about to acquire
LOCK_index.
Thread 3: Application thread is executing Purge binary logs
and acquired LOCK_index and it is about to
acquire LOCK_thread_count.
Thread 4: Application thread is executing show processlist
and acquired LOCK_thread_count and it is
about to acquire zombie dump thread's
LOCK_thd_data.
Deadlock Cycle:
Thread 1 -> Thread 2 -> Thread 3-> Thread 4 ->Thread 1
The same above deadlock was observed even when thread 4 is
executing 'SELECT * FROM information_schema.processlist' command and
acquired LOCK_thread_count and it is about to acquire zombie
dump thread's LOCK_thd_data.
Analysis:
There are four locks involved in the deadlock. LOCK_log,
LOCK_thread_count, LOCK_index and LOCK_thd_data.
LOCK_log, LOCK_thread_count, LOCK_index are global mutexes
where as LOCK_thd_data is local to a thread.
We can divide these four locks in two groups.
Group 1 consists of LOCK_log and LOCK_index and the order
should be LOCK_log followed by LOCK_index.
Group 2 consists of other two mutexes
LOCK_thread_count, LOCK_thd_data and the order should
be LOCK_thread_count followed by LOCK_thd_data.
Unfortunately, there is no specific predefined lock order defined
to follow in the MySQL system when it comes to locks across these
two groups. In the above problematic example,
there is no problem in the way we are acquiring the locks
if you see each thread individually.
But If you combine all 4 threads, they end up in a deadlock.
Fix:
Since everything seems to be fine in the way threads are taking locks,
In this patch We are changing the duration of the locks in Thread 4
to break the deadlock. i.e., before the patch, Thread 4
('show processlist' command) mysqld_list_processes()
function acquires LOCK_thread_count for the complete duration
of the function and it also acquires/releases
each thread's LOCK_thd_data.
LOCK_thread_count is used to protect addition and
deletion of threads in global threads list. While show
process list is looping through all the existing threads,
it will be a problem if a thread is exited but there is no problem
if a new thread is added to the system. Hence a new mutex is
introduced "LOCK_thd_remove" which will protect deletion
of a thread from global threads list. All threads which are
getting exited should acquire LOCK_thd_remove
followed by LOCK_thread_count. (It should take LOCK_thread_count
also because other places of the code still thinks that exit thread
is protected with LOCK_thread_count. In this fix, we are changing
only 'show process list' query logic )
(Eg: unlink_thd logic will be protected with
LOCK_thd_remove).
Logic of mysqld_list_processes(or file_schema_processlist)
will now be protected with 'LOCK_thd_remove' instead of
'LOCK_thread_count'.
Now the new locking order after this patch is:
LOCK_thd_remove -> LOCK_thd_data -> LOCK_log ->
LOCK_index -> LOCK_thread_count
SHOW PROCESSLIST, SHOW BINLOGS
Problem: A deadlock was occurring when 4 threads were
involved in acquiring locks in the following way
Thread 1: Dump thread ( Slave is reconnecting, so on
Master, a new dump thread is trying kill
zombie dump threads. It acquired thread's
LOCK_thd_data and it is about to acquire
mysys_var->current_mutex ( which LOCK_log)
Thread 2: Application thread is executing show binlogs and
acquired LOCK_log and it is about to acquire
LOCK_index.
Thread 3: Application thread is executing Purge binary logs
and acquired LOCK_index and it is about to
acquire LOCK_thread_count.
Thread 4: Application thread is executing show processlist
and acquired LOCK_thread_count and it is
about to acquire zombie dump thread's
LOCK_thd_data.
Deadlock Cycle:
Thread 1 -> Thread 2 -> Thread 3-> Thread 4 ->Thread 1
The same above deadlock was observed even when thread 4 is
executing 'SELECT * FROM information_schema.processlist' command and
acquired LOCK_thread_count and it is about to acquire zombie
dump thread's LOCK_thd_data.
Analysis:
There are four locks involved in the deadlock. LOCK_log,
LOCK_thread_count, LOCK_index and LOCK_thd_data.
LOCK_log, LOCK_thread_count, LOCK_index are global mutexes
where as LOCK_thd_data is local to a thread.
We can divide these four locks in two groups.
Group 1 consists of LOCK_log and LOCK_index and the order
should be LOCK_log followed by LOCK_index.
Group 2 consists of other two mutexes
LOCK_thread_count, LOCK_thd_data and the order should
be LOCK_thread_count followed by LOCK_thd_data.
Unfortunately, there is no specific predefined lock order defined
to follow in the MySQL system when it comes to locks across these
two groups. In the above problematic example,
there is no problem in the way we are acquiring the locks
if you see each thread individually.
But If you combine all 4 threads, they end up in a deadlock.
Fix:
Since everything seems to be fine in the way threads are taking locks,
In this patch We are changing the duration of the locks in Thread 4
to break the deadlock. i.e., before the patch, Thread 4
('show processlist' command) mysqld_list_processes()
function acquires LOCK_thread_count for the complete duration
of the function and it also acquires/releases
each thread's LOCK_thd_data.
LOCK_thread_count is used to protect addition and
deletion of threads in global threads list. While show
process list is looping through all the existing threads,
it will be a problem if a thread is exited but there is no problem
if a new thread is added to the system. Hence a new mutex is
introduced "LOCK_thd_remove" which will protect deletion
of a thread from global threads list. All threads which are
getting exited should acquire LOCK_thd_remove
followed by LOCK_thread_count. (It should take LOCK_thread_count
also because other places of the code still thinks that exit thread
is protected with LOCK_thread_count. In this fix, we are changing
only 'show process list' query logic )
(Eg: unlink_thd logic will be protected with
LOCK_thd_remove).
Logic of mysqld_list_processes(or file_schema_processlist)
will now be protected with 'LOCK_thd_remove' instead of
'LOCK_thread_count'.
Now the new locking order after this patch is:
LOCK_thd_remove -> LOCK_thd_data -> LOCK_log ->
LOCK_index -> LOCK_thread_count
This will help the following replicaition scenario:
MariaDB 10.0 master (statement replication) -> MariaDB 10.0 slave (row based replication) -> MySQL or MariaDB 5.x slave
mysql-test/r/mysqld--help.result:
Updated help text
mysql-test/suite/rpl/r/create_or_replace_mix.result:
Added more tests
mysql-test/suite/rpl/r/create_or_replace_row.result:
Added more tests
mysql-test/suite/rpl/r/create_or_replace_statement.result:
Added more tests
mysql-test/suite/rpl/t/create_or_replace.inc:
Added more tests
sql/handler.h:
Added org_options so that we can detect what come from the query and what was possible added later.
sql/sql_insert.cc:
Only write CREATE OR REPLACE if was originally specified or if we delete a conflicting table as part of create
sql/sql_parse.cc:
Remember orginal create options
sql/sql_table.cc:
Only write CREATE OR REPLACE if was originally specified or if we delete a conflicting table as part of create
sql/sys_vars.cc:
Updated help text
mysql-test/r/create_or_replace.result:
More tests for create or replace
mysql-test/t/create_or_replace.test:
More tests for create or replace
sql/log.cc:
Don't use binlog_hton if binlog is not enabmed
sql/sql_base.cc:
We have to call restart_trans_for_tables also if tables where not locked with LOCK TABLES.
If not, we will get a crash in TokuDB
sql/sql_insert.cc:
Don't call binlog_reset_cache() if we don't have binary log open
sql/sql_table.cc:
Don't log to binary log if not open
Better test if we where using create or replace ... select
storage/tokudb/mysql-test/tokudb_mariadb/r/create_or_replace.result:
More tests for create or replace
storage/tokudb/mysql-test/tokudb_mariadb/t/create_or_replace.test:
More tests for create or replace
Now if CREATE OR REPLACE fails but we have deleted a table already, we will generate a DROP TABLE in the binary log.
This fixes this issue.
In addition, for a failing CREATE OR REPLACE TABLE ... SELECT we don't generate a log of all the inserted rows, only the DROP TABLE.
I added code for not logging DROP TEMPORARY TABLE for tables where the CREATE TABLE was not logged. This code will be activated in 10.1
by removing the code protected by DONT_LOG_DROP_OF_TEMPORARY_TABLES.
mysql-test/suite/rpl/r/create_or_replace_mix.result:
More test cases
mysql-test/suite/rpl/r/create_or_replace_row.result:
More test cases
mysql-test/suite/rpl/r/create_or_replace_statement.result:
More test cases
mysql-test/suite/rpl/t/create_or_replace.inc:
More test cases
sql/log.cc:
Added binlog_reset_cache() to clear the binary log.
sql/log.h:
Added prototype
sql/sql_insert.cc:
If CREATE OR REPLACE TABLE ... SELECT fails:
- Don't log anything if nothing changed
- If table was deleted, log a DROP TABLE.
Remember if we table creation of temporary tables was logged.
sql/sql_table.cc:
Added log_drop_table()
Remember if we table creation of temporary tables was logged.
If CREATE OR REPLACE TABLE ... SELECT fails and a table was deleted, log a DROP TABLE.
sql/sql_table.h:
Added prototype
sql/sql_truncate.cc:
Remember if we table creation of temporary tables was logged.
sql/table.h:
Added table_creation_was_logged
mysql-test/r/create_or_replace.result:
Added test of releasing of metadata locks
mysql-test/t/create_or_replace.test:
Added test of releasing of metadata locks
sql/handler.h:
Added marker if table was deleted as part of CREATE OR REPLACE
sql/sql_base.cc:
Added Locked_tables_list::unlock_locked_table()
sql/sql_class.h:
New prototypes
sql/sql_insert.cc:
Unlock metadata locks for deleted table in case of error. Also do unlock tables if this was the only locked table.
sql/sql_table.cc:
Unlock metadata locks for deleted table in case of error. Also do unlock tables if this was the only locked table.
This is port of fix for MySQL BUG#17647863.
revno: 5572
revision-id: jon.hauglid@oracle.com-20131030232243-b0pw98oy72uka2sj
committer: Jon Olav Hauglid <jon.hauglid@oracle.com>
timestamp: Thu 2013-10-31 00:22:43 +0100
message:
Bug#17647863: MYSQL DOES NOT COMPILE ON OSX 10.9 GM
Rename test() macro to MY_TEST() to avoid conflict with libc++.
Move TABLE::in_use out of LOCK_open.
This is done with assumtion that foreign threads accessing TABLE::in_use
will only need consistent value _after_ marking table for flush and purging
unused table instances. In this case TABLE::in_use will always point to a
valid thread object.
Previously FLUSH TABLES thread may wait for tables flushed subsequently by
concurrent threads which breaks the above assumption, e.g.:
open tables: t1 (version= 1)
thr1 (FLUSH TABLES): refresh_version++
thr1 (FLUSH TABLES): purge table cache
open tables: none
thr2 (SELECT * FROM t1): open tables: t1
open tables: t1 (version= 2)
thr2 (FLUSH TABLES): refresh_version++
thr2 (FLUSH TABLES): purge table cache
thr1 (FLUSH TABLES): wait for old tables (including t1 with version 2)
It is fixed so that FLUSH TABLES waits only for tables that were open
heretofore.
- CREATE TABLE is by default executed on the slave as CREATE OR REPLACE
- DROP TABLE is by default executed on the slave as DROP TABLE IF NOT EXISTS
This means that a slave will by default continue even if we try to create
a table that existed on the slave (the table will be deleted and re-created) or
if we try to drop a table that didn't exist on the slave.
This should be safe as instead of having the slave stop because of an inconsistency between
master and slave, it will fix the inconsistency.
Those that would prefer to get a stopped slave instead for the above cases can set slave_ddl_exec_mode to STRICT.
- Ensure that a CREATE OR REPLACE TABLE which dropped a table is replicated
- DROP TABLE that generated an error on master is handled as an identical DROP TABLE on the slave (IF NOT EXISTS is not added in this case)
- Added slave_ddl_exec_mode variable to decide how DDL's are replicated
New logic for handling BEGIN GTID ... COMMIT from the binary log:
- When we find a BEGIN GTID, we start a transaction and set OPTION_GTID_BEGIN
- When we find COMMIT, we reset OPTION_GTID_BEGIN and execute the normal COMMIT code.
- While OPTION_GTID_BEGIN is set:
- We don't generate implict commits before or after statements
- All tables are regarded as transactional tables in the binary log (to ensure things are executed exactly as on the master)
- We reset OPTION_GTID_BEGIN also on rollback
This will help ensuring that we don't get any sporadic commits (and thus new GTID's) on the slave and will help keep the GTID's between master and slave in sync.
mysql-test/extra/rpl_tests/rpl_log.test:
Added testing of mode slave_ddl_exec_mode=STRICT
mysql-test/r/mysqld--help.result:
New help messages
mysql-test/suite/rpl/r/create_or_replace_mix.result:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/r/create_or_replace_row.result:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/r/create_or_replace_statement.result:
Testing replication of create or replace
mysql-test/suite/rpl/r/rpl_gtid_startpos.result:
Test must be run in slave_ddl_exec_mode=STRICT as part of the test depends on that DROP TABLE should fail on slave.
mysql-test/suite/rpl/r/rpl_row_log.result:
Updated result
mysql-test/suite/rpl/r/rpl_row_log_innodb.result:
Updated result
mysql-test/suite/rpl/r/rpl_row_show_relaylog_events.result:
Updated result
mysql-test/suite/rpl/r/rpl_stm_log.result:
Updated result
mysql-test/suite/rpl/r/rpl_stm_mix_show_relaylog_events.result:
Updated result
mysql-test/suite/rpl/r/rpl_temp_table_mix_row.result:
Updated result
mysql-test/suite/rpl/t/create_or_replace.inc:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_mix.cnf:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_mix.test:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_row.cnf:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_row.test:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_statement.cnf:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_statement.test:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/rpl_gtid_startpos.test:
Test must be run in slave_ddl_exec_mode=STRICT as part of the test depends on that DROP TABLE should fail on slave.
mysql-test/suite/rpl/t/rpl_stm_log.test:
Removed some lines
mysql-test/suite/sys_vars/r/slave_ddl_exec_mode_basic.result:
Testing of slave_ddl_exec_mode
mysql-test/suite/sys_vars/t/slave_ddl_exec_mode_basic.test:
Testing of slave_ddl_exec_mode
sql/handler.cc:
Regard all tables as transactional in commit if OPTION_GTID_BEGIN is set.
This is to ensure that statments are not commited too early if non transactional tables are used.
sql/log.cc:
Regard all tables as transactional in commit if OPTION_GTID_BEGIN is set.
Also treat 'direct' log events as transactional (to get them logged as they where on the master)
sql/log_event.cc:
Ensure that the new error from DROP TABLE when trying to drop a view is treated same as the old one.
Store error code that slave expects in THD.
Set OPTION_GTID_BEGIN if we find a BEGIN.
Reset OPTION_GTID_BEGIN if we find a COMMIT.
sql/mysqld.cc:
Added slave_ddl_exec_mode_options
sql/mysqld.h:
Added slave_ddl_exec_mode_options
sql/rpl_gtid.cc:
Reset OPTION_GTID_BEGIN if we record a gtid (safety)
sql/sql_class.cc:
Regard all tables as transactional in commit if OPTION_GTID_BEGIN is set.
sql/sql_class.h:
Added to THD: log_current_statement and slave_expected_error
sql/sql_insert.cc:
Ensure that CREATE OR REPLACE is logged if table was deleted.
Don't do implicit commit for CREATE if we are under OPTION_GTID_BEGIN
sql/sql_parse.cc:
Change CREATE TABLE -> CREATE OR REPLACE TABLE for slaves
Change DROP TABLE -> DROP TABLE IF EXISTS for slaves
CREATE TABLE doesn't force implicit commit in case of OPTION_GTID_BEGIN
Don't do commits before or after any statement if OPTION_GTID_BEGIN was set.
sql/sql_priv.h:
Added OPTION_GTID_BEGIN
sql/sql_show.cc:
Enhanced store_create_info() to also be able to handle CREATE OR REPLACE
sql/sql_show.h:
Updated prototype
sql/sql_table.cc:
Ensure that CREATE OR REPLACE is logged if table was deleted.
sql/sys_vars.cc:
Added slave_ddl_exec_mode
sql/transaction.cc:
Added warning if we got a GTID under OPTION_GTID_BEGIN
Using CREATE OR REPLACE TABLE is be identical to
DROP TABLE IF EXISTS table_name;
CREATE TABLE ...;
Except that:
* CREATE OR REPLACE is be atomic (now one can create the same table between drop and create).
* Temporary tables will not shadow the table name for the DROP as the CREATE TABLE tells us already if we are using a temporary table or not.
* If the table was locked with LOCK TABLES, the new table will be locked with the same lock after it's created.
Implementation details:
- We don't anymore open the to-be-created table during CREATE TABLE, which the original code did.
- There is no need to open a table we are planning to create. It's enough to check if the table exists or not.
- Removed some of duplicated code for CREATE IF NOT EXISTS.
- Give an error when using CREATE OR REPLACE with IF NOT EXISTS (conflicting options).
- As a side effect of the code changes, we don't anymore have to internally re-prepare prepared statements with CREATE TABLE if the table exists.
- Made one code path for all testing if log table are in use.
- Better error message if one tries to create/drop/alter a log table in use
- Added back disabled rpl_row_create_table test as it now seams to work and includes a lot of interesting tests.
- Added HA_LEX_CREATE_REPLACE to mark if we are using CREATE OR REPLACE
- Aligned CREATE OR REPLACE parsing code in sql_yacc.yy for TABLE and VIEW
- Changed interface for drop_temporary_table() to make it more reusable
- Changed Locked_tables_list::init_locked_tables() to work on the table object instead of the table list object. Before this it used a mix of both, which was not good.
- Locked_tables_list::unlock_locked_tables(THD *thd) now requires a valid thd argument. Old usage of calling this with 0 i changed to instead call Locked_tables_list::reset()
- Added functions Locked_tables_list:restore_lock() and Locked_tables_list::add_back_last_deleted_lock() to be able to easily add back a locked table to the lock list.
- Added restart_trans_for_tables() to be able to restart a transaction.
- DROP_ACL is required if one uses CREATE TABLE OR REPLACE.
- Added drop of normal and temporary tables in create_table_imp() if CREATE OR REPLACE was used.
- Added reacquiring of table locks in mysql_create_table() and mysql_create_like_table()
mysql-test/include/commit.inc:
With new code we get fewer status increments
mysql-test/r/commit_1innodb.result:
With new code we get fewer status increments
mysql-test/r/create.result:
Added testing of create or replace with timeout
mysql-test/r/create_or_replace.result:
Basic testing of CREATE OR REPLACE TABLE
mysql-test/r/partition_exchange.result:
New error message
mysql-test/r/ps_ddl.result:
Fewer reprepares with new code
mysql-test/suite/archive/discover.result:
Don't rediscover archive tables if the .frm file exists
(Sergei will look at this if there is a better way...)
mysql-test/suite/archive/discover.test:
Don't rediscover archive tables if the .frm file exists
(Sergei will look at this if there is a better way...)
mysql-test/suite/funcs_1/r/innodb_views.result:
New error message
mysql-test/suite/funcs_1/r/memory_views.result:
New error message
mysql-test/suite/rpl/disabled.def:
rpl_row_create_table should now be safe to use
mysql-test/suite/rpl/r/rpl_row_create_table.result:
Updated results after adding back disabled test
mysql-test/suite/rpl/t/rpl_create_if_not_exists.test:
Added comment
mysql-test/suite/rpl/t/rpl_row_create_table.test:
Added CREATE OR REPLACE TABLE test
mysql-test/t/create.test:
Added CREATE OR REPLACE TABLE test
mysql-test/t/create_or_replace-master.opt:
Create logs
mysql-test/t/create_or_replace.test:
Basic testing of CREATE OR REPLACE TABLE
mysql-test/t/partition_exchange.test:
Error number changed as we are now using same code for all log table change issues
mysql-test/t/ps_ddl.test:
Fewer reprepares with new code
sql/handler.h:
Moved things around a bit in a structure to get better alignment.
Added HA_LEX_CREATE_REPLACE to mark if we are using CREATE OR REPLACE
Added 3 elements to end of HA_CREATE_INFO to be able to store state to add backs locks in case of LOCK TABLES.
sql/log.cc:
Reimplemented check_if_log_table():
- Simpler and faster usage
- Can give error messages
This gives us one code path for allmost all error messages if log tables are in use
sql/log.h:
New interface for check_if_log_table()
sql/slave.cc:
More logging
sql/sql_alter.cc:
New interface for check_if_log_table()
sql/sql_base.cc:
More documentation
Changed interface for drop_temporary_table() to make it more reusable
Changed Locked_tables_list::init_locked_tables() to work on the table object instead of the table list object. Before this it used a mix of both, which was not good.
Locked_tables_list::unlock_locked_tables(THD *thd) now requires a valid thd argument. Old usage of calling this with 0 i changed to instead call Locked_tables_list::reset()
Added functions Locked_tables_list:restore_lock() and Locked_tables_list::add_back_last_deleted_lock() to be able to easily add back a locked table to the lock list.
Check for command number instead of open_strategy of CREATE TABLE was used.
Added restart_trans_for_tables() to be able to restart a transaction. This was needed in "create or replace ... select" between the drop table and the select.
sql/sql_base.h:
Added and updated function prototypes
sql/sql_class.h:
Added new prototypes to Locked_tables_list class
Added extra argument to select_create to avoid double call to eof() or send_error()
- I needed this in some edge case where the table was not created against expections.
sql/sql_db.cc:
New interface for check_if_log_table()
sql/sql_insert.cc:
Remember position to lock information so that we can reaquire table lock for LOCK TABLES + CREATE OR REPLACE TABLE SELECT. Later add back the lock by calling restore_lock().
Removed one not needed indentation level in create_table_from_items()
Ensure we don't call send_eof() or abort_result_set() twice.
sql/sql_lex.h:
Removed variable that I temporarly added in an earlier changeset
sql/sql_parse.cc:
Removed old test code (marked with QQ)
Ensure that we have open_strategy set as TABLE_LIST::OPEN_STUB in CREATE TABLE
Removed some IF NOT EXISTS code as this is now handled in create_table_table_impl().
Set OPTION_KEEP_LOGS later. This code had to be moved as the test for IF EXISTS has changed place.
DROP_ACL is required if one uses CREATE TABLE OR REPLACE.
sql/sql_partition_admin.cc:
New interface for check_if_log_table()
sql/sql_rename.cc:
New interface for check_if_log_table()
sql/sql_table.cc:
New interface for check_if_log_table()
Moved some code in mysql_rm_table() under a common test.
- Safe as temporary tables doesn't have statistics.
- !is_temporary_table(table) test was moved out from drop_temporary_table() and merged with upper level code.
- Added drop of normal and temporary tables in create_table_imp() if CREATE OR REPLACE was used.
- Added reacquiring of table locks in mysql_create_table() and mysql_create_like_table()
- In mysql_create_like_table(), restore table->open_strategy() if it was changed.
- Re-test if table was a view after opening it.
sql/sql_table.h:
New prototype for mysql_create_table_no_lock()
sql/sql_yacc.yy:
Added syntax for CREATE OR REPLACE TABLE
Reuse new code for CREATE OR REPLACE VIEW
sql/table.h:
Added name for enum type
sql/table_cache.cc:
More DBUG
Added variable "OLD_MODE" that can be used to turn off the new behavior
mysql-test/r/insert.result:
Added test case
mysql-test/r/mysqld--help.result:
Added old_mode
mysql-test/suite/sys_vars/r/old_mode_basic.result:
Added testing of new variable
mysql-test/suite/sys_vars/t/old_mode_basic.test:
Added testing of new variable
mysql-test/t/insert.test:
Added test case
sql/sql_class.h:
Added bit flags for OLD_MODE
sql/sql_insert.cc:
Disable duplicate key warnings for INSERT IGNORE of OLD_MODE NO_DUP_KEY_WARNINGS_WITH_IGNORE is used
sql/sql_show.cc:
Don't show progress reporting on SHOW PROCESSLIST if OLD_MODE NO_PROGRESS_INFO is used
sql/sys_vars.cc:
Added OLD_MODE
Main fix was to not cache derivied tables as they may be temporary tables that are deleted before the next query.
This was a bit tricky as Item_field::fix_fields depended on cached_tables to be set to resolve some columns.
mysql-test/r/sp-bugs.result:
Added test case
mysql-test/t/sp-bugs.test:
Added test case
sql/item.cc:
Fixed fix_outer_field to handle case where found field did not have in cached_table
Idea is that if cached_table is not avaliable, use from_field->table->pos_in_table_list instead
sql/records.cc:
Also accept INTERNAL_TMP_TABLE for memmap
sql/sql_base.cc:
More DBUG_PRINT
Fixed that setup_natural_join_row_types() is not run twice.
Original code modified context->first_name_resolution_table also for second executions.
This was wrong as this could give wrong results if some joins had been optimized away between calls.
sql/sql_derived.cc:
Mark derived tables as internal temporary tables (INTERNAL_TMP_TABLE), not as NON_TRANSACTIONAL_TMP_TABLE.
This is more correct as the tables are not visible by the end user.
sql/sql_insert.cc:
Reset pos_in_table_list before calling fix_fields.
One of the consequences of the change of not caching all generated tables in Item_ident is that
pos_in_table_list needs to be correct in calls to fix_fields.
sql/sql_lex.cc:
More DBUG_PRINT
sql/sql_parse.cc:
Don't cache derivied tables as they may be temporary tables that are deleted before the next query
sql/sql_select.cc:
Reset table_vector. This was required as some code checked the vector to see if temporary tables had already been created.
sql/table.cc:
Mark tables with field translations as cacheable (as these will not disapper between stmt executions.
- Added MALLOC_LIBRARY variable to hold name of malloc library
- Back ported valgrind related fixes from jemalloc 3.4.1 to the included jemalloc 3.3.1
- Renamed bitmap_init() and bitmap_free() to my_bitmap_init() and my_bitmap_free() to avoid clash with jemalloc 3.4.1
- Use option --soname-synonyms=somalloc=NON to valgrind when using jemalloc
- Show version related variables in mysqld --help
-- Added SHOW_VALUE_IN_HELP marker
Increased back_log to 150 as the original value was a bit too small
CMakeLists.txt:
Added MALLOC_LIBRARY variable to hold name of malloc library
cmake/jemalloc.cmake:
Added MALLOC_LIBRARY variable to hold name of malloc library
config.h.cmake:
Added MALLOC_LIBRARY variable to hold name of malloc library
extra/jemalloc/ChangeLog:
Updates changelog
extra/jemalloc/include/jemalloc/internal/arena.h:
Backported valgrind fixes from jemalloc 3.4.1
extra/jemalloc/include/jemalloc/internal/jemalloc_internal.h.in:
Backported valgrind fixes from jemalloc 3.4.1
extra/jemalloc/include/jemalloc/internal/private_namespace.h:
Backported valgrind fixes from jemalloc 3.4.1
extra/jemalloc/include/jemalloc/internal/tcache.h:
Backported valgrind fixes from jemalloc 3.4.1
extra/jemalloc/src/arena.c:
Backported valgrind fixes from jemalloc 3.4.1
include/my_bitmap.h:
Renamed bitmap_init() and bitmap_free() to my_bitmap_init() and my_bitmap_free() to avoid clash with jemalloc 3.4.1
mysql-test/mysql-test-run.pl:
Use option --soname-synonyms=somalloc=NON to valgrind when using jemalloc
mysql-test/valgrind.supp:
Supression of memory leak in OpenSuse 12.3
mysys/my_bitmap.c:
Renamed bitmap_init() and bitmap_free() to my_bitmap_init() and my_bitmap_free()
sql/ha_ndbcluster_binlog.cc:
Renames
sql/ha_ndbcluster_cond.h:
Renames
sql/ha_partition.cc:
Renames
sql/handler.cc:
Renames
sql/item_subselect.cc:
Renames
sql/log_event.cc:
Renames
sql/log_event_old.cc:
Renames
sql/mysqld.cc:
Renames
Show version related variables in mysqld --help
sql/opt_range.cc:
Renames
sql/opt_table_elimination.cc:
Renames
sql/partition_info.cc:
Renames
sql/rpl_injector.h:
Renames
sql/set_var.h:
Renames
sql/slave.cc:
Renames
sql/sql_bitmap.h:
Renames
sql/sql_insert.cc:
Renames
sql/sql_lex.h:
Renames
sql/sql_parse.cc:
Renames
sql/sql_partition.cc:
Renames
sql/sql_select.cc:
Renames
sql/sql_show.cc:
Renames
sql/sql_update.cc:
Renames
sql/sys_vars.cc:
Show version related variables in mysqld --help
sql/sys_vars.h:
Added SHOW_VALUE_IN_HELP marker for variables that should be shown in --help
sql/table.cc:
Renames
sql/table.h:
Removed not used bitmap_init_value
storage/connect/ha_connect.cc:
Removed compiler warning
storage/maria/ma_open.c:
Renames
unittest/mysys/bitmap-t.c:
Renames
- the problem was caused by EXPLAIN INSERT SELECT. For that statement,
the code would call select_insert::prepare2(), which would call
handler->ha_start_bulk_insert(). The corresponding handler->end_bulk_insert()
call is made from select_insert::send_eof or select_insert::abort_result_set
which are never called for EXPLAIN INSERT SELECT.
- Fixed by re-using approach of mysql-5.6: don't call ha_start_bulk_insert() if
we are in EXPLAIN.
The merge is still missing a few hunks related to temporary tables and
InnoDB log file size. The associated code did not seem to exist in
10.0, so the merge of that needs more work. Until this is fixed, there
are a number of test failures as a result.
- It turns out, there are statements that will call lex_start(thd->lex)
after parsing has been finished. lex_start() will set lex->explain=NULL,
which will lose the pointer to already allocated Explain_plan object.
- To get rid of this, switch to lazy creation of lex->explain. Now, it is
created only when we get a part ot query plan.
Update the SHOW EXPLAIN code to work with the
new architecture (part#1):
Before, SHOW EXPLAIN operated on real query plan structures,
which meant it had to check when SELECTs are created/deleted.
SELECTs would call apc_target->enable() when they got a query
plan and disable() when their query plan was deleted.
Now, Explain data structure becomes available at once (and we
call apc_target->enable()) and then it stays until it is deleted
(when that happens, we call apc_target->disable()).
