compiled for debugging, when the server goes down
This happens in the following scenario:
- Server gets a shutdown message
- Servers sends error ER_CONNECTION_KILLED to the clients connection
- The client sends a query to the server, before the server has time to
close the connection to the client
- Client reads the ER_CONNECTION_KILLED error message
In the above case, the packet number for the reply is one less than
what the client expected and the client prints "Packets out of order".
Fixed the following way:
- The client accepts now error packages with a packet number
one less than expected.
- To ensure that this issue can be detected early in my_real_read(), error
messages sent to the client are not compressed, even when compressed protocol is used.
Commit#ebd24626ca38e7fa1e3da2acdcf88540be70fabe obsoleted the THREAD and
THREAD_SAFE_CLIENT preprocessor symbols. This is not removed in the
sql/net_serv.cc thereby the code that retries on EINTR became dead code.
Remove the THREAD_SAFE_CLIENT preprocessor directive form sql/net_serv.cc.
Also check errno for EINTR only if there is an error in preceding read call.
- Added testing if connection is killed to shortcut reading of connection data
This will allow us later in 10.2 to do a cleaner shutdown of slaves (less errors in the log)
- Add new status variables: Slaves_connected, Slaves_running and Slave_connections.
- Use MYSQL_SLAVE_NOT_RUN instead of 0 with slave_running.
- Don't print obvious extra warnings to the error log when slave is shut down normally.
On EOF vio_read returns 0, it's not an error so the errno
is not reset. If the previous error was EINTR the client
will loop forever. See also man recv.
The reason for the failure was a bug in an include file on debian that causes 'struct stat'
to have different sized depending on the environment.
This patch fixes so that we always include my_global.h or my_config.h before we include any other files.
Other things:
- Removed #include <my_global.h> in some include files; Better to always do this at the top level to have as few
"always-include-this-file-first' files as possible.
- Removed usage of some include files that where already included by my_global.h or by other files.
client/mysql_plugin.c:
Use my_global.h first
client/mysqlslap.c:
Remove duplicated include files
extra/comp_err.c:
Remove duplicated include files
include/m_string.h:
Remove duplicated include files
include/maria.h:
Remove duplicated include files
libmysqld/emb_qcache.cc:
Use my_global.h first
plugin/semisync/semisync.h:
Use my_pthread.h first
sql/datadict.cc:
Use my_global.h first
sql/debug_sync.cc:
Use my_global.h first
sql/derror.cc:
Use my_global.h first
sql/des_key_file.cc:
Use my_global.h first
sql/discover.cc:
Use my_global.h first
sql/event_data_objects.cc:
Use my_global.h first
sql/event_db_repository.cc:
Use my_global.h first
sql/event_parse_data.cc:
Use my_global.h first
sql/event_queue.cc:
Use my_global.h first
sql/event_scheduler.cc:
Use my_global.h first
sql/events.cc:
Use my_global.h first
sql/field.cc:
Use my_global.h first
Remove duplicated include files
sql/field_conv.cc:
Use my_global.h first
sql/filesort.cc:
Use my_global.h first
Remove duplicated include files
sql/gstream.cc:
Use my_global.h first
sql/ha_ndbcluster.cc:
Use my_global.h first
sql/ha_ndbcluster_binlog.cc:
Use my_global.h first
sql/ha_ndbcluster_cond.cc:
Use my_global.h first
sql/ha_partition.cc:
Use my_global.h first
sql/handler.cc:
Use my_global.h first
sql/hash_filo.cc:
Use my_global.h first
sql/hostname.cc:
Use my_global.h first
sql/init.cc:
Use my_global.h first
sql/item.cc:
Use my_global.h first
sql/item_buff.cc:
Use my_global.h first
sql/item_cmpfunc.cc:
Use my_global.h first
sql/item_create.cc:
Use my_global.h first
sql/item_geofunc.cc:
Use my_global.h first
sql/item_inetfunc.cc:
Use my_global.h first
sql/item_row.cc:
Use my_global.h first
sql/item_strfunc.cc:
Use my_global.h first
sql/item_subselect.cc:
Use my_global.h first
sql/item_sum.cc:
Use my_global.h first
sql/item_timefunc.cc:
Use my_global.h first
sql/item_xmlfunc.cc:
Use my_global.h first
sql/key.cc:
Use my_global.h first
sql/lock.cc:
Use my_global.h first
sql/log.cc:
Use my_global.h first
sql/log_event.cc:
Use my_global.h first
sql/log_event_old.cc:
Use my_global.h first
sql/mf_iocache.cc:
Use my_global.h first
sql/mysql_install_db.cc:
Remove duplicated include files
sql/mysqld.cc:
Remove duplicated include files
sql/net_serv.cc:
Remove duplicated include files
sql/opt_range.cc:
Use my_global.h first
sql/opt_subselect.cc:
Use my_global.h first
sql/opt_sum.cc:
Use my_global.h first
sql/parse_file.cc:
Use my_global.h first
sql/partition_info.cc:
Use my_global.h first
sql/procedure.cc:
Use my_global.h first
sql/protocol.cc:
Use my_global.h first
sql/records.cc:
Use my_global.h first
sql/records.h:
Don't include my_global.h
Better to do this at the upper level
sql/repl_failsafe.cc:
Use my_global.h first
sql/rpl_filter.cc:
Use my_global.h first
sql/rpl_gtid.cc:
Use my_global.h first
sql/rpl_handler.cc:
Use my_global.h first
sql/rpl_injector.cc:
Use my_global.h first
sql/rpl_record.cc:
Use my_global.h first
sql/rpl_record_old.cc:
Use my_global.h first
sql/rpl_reporting.cc:
Use my_global.h first
sql/rpl_rli.cc:
Use my_global.h first
sql/rpl_tblmap.cc:
Use my_global.h first
sql/rpl_utility.cc:
Use my_global.h first
sql/set_var.cc:
Added comment
sql/slave.cc:
Use my_global.h first
sql/sp.cc:
Use my_global.h first
sql/sp_cache.cc:
Use my_global.h first
sql/sp_head.cc:
Use my_global.h first
sql/sp_pcontext.cc:
Use my_global.h first
sql/sp_rcontext.cc:
Use my_global.h first
sql/spatial.cc:
Use my_global.h first
sql/sql_acl.cc:
Use my_global.h first
sql/sql_admin.cc:
Use my_global.h first
sql/sql_analyse.cc:
Use my_global.h first
sql/sql_audit.cc:
Use my_global.h first
sql/sql_base.cc:
Use my_global.h first
sql/sql_binlog.cc:
Use my_global.h first
sql/sql_bootstrap.cc:
Use my_global.h first
Use my_global.h first
sql/sql_cache.cc:
Use my_global.h first
sql/sql_class.cc:
Use my_global.h first
sql/sql_client.cc:
Use my_global.h first
sql/sql_connect.cc:
Use my_global.h first
sql/sql_crypt.cc:
Use my_global.h first
sql/sql_cursor.cc:
Use my_global.h first
sql/sql_db.cc:
Use my_global.h first
sql/sql_delete.cc:
Use my_global.h first
sql/sql_derived.cc:
Use my_global.h first
sql/sql_do.cc:
Use my_global.h first
sql/sql_error.cc:
Use my_global.h first
sql/sql_explain.cc:
Use my_global.h first
sql/sql_expression_cache.cc:
Use my_global.h first
sql/sql_handler.cc:
Use my_global.h first
sql/sql_help.cc:
Use my_global.h first
sql/sql_insert.cc:
Use my_global.h first
sql/sql_lex.cc:
Use my_global.h first
sql/sql_load.cc:
Use my_global.h first
sql/sql_locale.cc:
Use my_global.h first
sql/sql_manager.cc:
Use my_global.h first
sql/sql_parse.cc:
Use my_global.h first
sql/sql_partition.cc:
Use my_global.h first
sql/sql_plugin.cc:
Added comment
sql/sql_prepare.cc:
Use my_global.h first
sql/sql_priv.h:
Added error if we use this before including my_global.h
This check is here becasue so many files includes sql_priv.h first.
sql/sql_profile.cc:
Use my_global.h first
sql/sql_reload.cc:
Use my_global.h first
sql/sql_rename.cc:
Use my_global.h first
sql/sql_repl.cc:
Use my_global.h first
sql/sql_select.cc:
Use my_global.h first
sql/sql_servers.cc:
Use my_global.h first
sql/sql_show.cc:
Added comment
sql/sql_signal.cc:
Use my_global.h first
sql/sql_statistics.cc:
Use my_global.h first
sql/sql_table.cc:
Use my_global.h first
sql/sql_tablespace.cc:
Use my_global.h first
sql/sql_test.cc:
Use my_global.h first
sql/sql_time.cc:
Use my_global.h first
sql/sql_trigger.cc:
Use my_global.h first
sql/sql_udf.cc:
Use my_global.h first
sql/sql_union.cc:
Use my_global.h first
sql/sql_update.cc:
Use my_global.h first
sql/sql_view.cc:
Use my_global.h first
sql/sys_vars.cc:
Added comment
sql/table.cc:
Use my_global.h first
sql/thr_malloc.cc:
Use my_global.h first
sql/transaction.cc:
Use my_global.h first
sql/uniques.cc:
Use my_global.h first
sql/unireg.cc:
Use my_global.h first
sql/unireg.h:
Removed inclusion of my_global.h
storage/archive/ha_archive.cc:
Added comment
storage/blackhole/ha_blackhole.cc:
Use my_global.h first
storage/csv/ha_tina.cc:
Use my_global.h first
storage/csv/transparent_file.cc:
Use my_global.h first
storage/federated/ha_federated.cc:
Use my_global.h first
storage/federatedx/federatedx_io.cc:
Use my_global.h first
storage/federatedx/federatedx_io_mysql.cc:
Use my_global.h first
storage/federatedx/federatedx_io_null.cc:
Use my_global.h first
storage/federatedx/federatedx_txn.cc:
Use my_global.h first
storage/heap/ha_heap.cc:
Use my_global.h first
storage/innobase/handler/handler0alter.cc:
Use my_global.h first
storage/maria/ha_maria.cc:
Use my_global.h first
storage/maria/unittest/ma_maria_log_cleanup.c:
Remove duplicated include files
storage/maria/unittest/test_file.c:
Added comment
storage/myisam/ha_myisam.cc:
Move sql_plugin.h first as this includes my_global.h
storage/myisammrg/ha_myisammrg.cc:
Use my_global.h first
storage/oqgraph/oqgraph_thunk.cc:
Use my_config.h and my_global.h first
One could not include my_global.h before oqgraph_thunk.h (don't know why)
storage/spider/ha_spider.cc:
Use my_global.h first
storage/spider/hs_client/config.cpp:
Use my_global.h first
storage/spider/hs_client/escape.cpp:
Use my_global.h first
storage/spider/hs_client/fatal.cpp:
Use my_global.h first
storage/spider/hs_client/hstcpcli.cpp:
Use my_global.h first
storage/spider/hs_client/socket.cpp:
Use my_global.h first
storage/spider/hs_client/string_util.cpp:
Use my_global.h first
storage/spider/spd_conn.cc:
Use my_global.h first
storage/spider/spd_copy_tables.cc:
Use my_global.h first
storage/spider/spd_db_conn.cc:
Use my_global.h first
storage/spider/spd_db_handlersocket.cc:
Use my_global.h first
storage/spider/spd_db_mysql.cc:
Use my_global.h first
storage/spider/spd_db_oracle.cc:
Use my_global.h first
storage/spider/spd_direct_sql.cc:
Use my_global.h first
storage/spider/spd_i_s.cc:
Use my_global.h first
storage/spider/spd_malloc.cc:
Use my_global.h first
storage/spider/spd_param.cc:
Use my_global.h first
storage/spider/spd_ping_table.cc:
Use my_global.h first
storage/spider/spd_sys_table.cc:
Use my_global.h first
storage/spider/spd_table.cc:
Use my_global.h first
storage/spider/spd_trx.cc:
Use my_global.h first
storage/xtradb/handler/handler0alter.cc:
Use my_global.h first
storage/xtradb/handler/i_s.cc:
Use my_global.h first
The bug was that my_real_read() called net_before_header_psi() multiple times for long packets.
Fixed by adding a flag when we are reading a header.
Did also some cleanups to interface of my_net_read() to avoid unnecessary calls if performance schema is not used.
- Added my_net_read_packet() as a replacement for my_net_read(). my_net_read() is still in the client library for old clients.
- Removed THD->m_server_idle (not needed anymore as this is now given as argument to my_net_read_packet()
- Added my_net_read_packet(), which is a new version of my_net_read() with a new parameter if we are doing a read for a new command from the server.
- Added tests for compressed protocol and big packets
include/mysql.h.pp:
Added my_net_read_packet() as a replacement for my_net_read()
include/mysql_com.h:
Added my_net_read_packet() as a replacement for my_net_read()
mysql-test/r/mysql_client_test_comp.result:
New test
mysql-test/t/mysql_client_test-master.opt:
Added max_allowed_packet to be able to test big packets and packet size overflows.
mysql-test/t/mysql_client_test_comp-master.opt:
New test
mysql-test/t/mysql_client_test_nonblock-master.opt:
Added max_allowed_packet to be able to test big packets and packet size overflows.
sql-common/client.c:
Use my_net_read_packet()
sql/mf_iocache.cc:
Use my_net_read_packet()
sql/mysqld.cc:
Removed THD->m_server_idle (not needed anymore as this is now given as argument to my_net_read_packet()
sql/net_serv.cc:
Added argument to my_real_read() to indicte if we are reading the first block of the next statement and should call performance schema.
Added 'compatibilty function' my_net_read().
Added my_net_read_packet(), which is a new version of my_net_read() with a new parameter if we are doing a read for a new command from the server.
sql/sql_class.cc:
Removed m_server_idle (not needed anymore)
sql/sql_class.h:
Removed m_server_idle (not needed anymore)
sql/sql_parse.cc:
Removed m_server_idle (not needed anymore)
tests/mysql_client_test.c:
Added tests for compressed protocol and big packets
This is port of fix for MySQL BUG#17647863.
revno: 5572
revision-id: jon.hauglid@oracle.com-20131030232243-b0pw98oy72uka2sj
committer: Jon Olav Hauglid <jon.hauglid@oracle.com>
timestamp: Thu 2013-10-31 00:22:43 +0100
message:
Bug#17647863: MYSQL DOES NOT COMPILE ON OSX 10.9 GM
Rename test() macro to MY_TEST() to avoid conflict with libc++.
AND 'KILL SESSION' LEAD TO CRASH
Analysis:
--------
This situation occurs when the connection executes query
"show engine innodb status" and this connection is killed by
executing statement "kill <con>" by another connection.
In function "innodb_show_status", function "stat_print"
is called to print the status but return value of function
is not checked. After killing connection, if write to
connection fails then error is returned and same is set
in Diagnostic area. Since FALSE is returned from
"innodb_show_status" now, assert to check no error
is set in function "set_eof_status" (called from
my_eof) is failing.
Fix:
----
Changed code to check return value of function "stat_print"
in "innodb_show_status".
AND 'KILL SESSION' LEAD TO CRASH
Analysis:
--------
This situation occurs when the connection executes query
"show engine innodb status" and this connection is killed by
executing statement "kill <con>" by another connection.
In function "innodb_show_status", function "stat_print"
is called to print the status but return value of function
is not checked. After killing connection, if write to
connection fails then error is returned and same is set
in Diagnostic area. Since FALSE is returned from
"innodb_show_status" now, assert to check no error
is set in function "set_eof_status" (called from
my_eof) is failing.
Fix:
----
Changed code to check return value of function "stat_print"
in "innodb_show_status".
includes:
* remove some remnants of "Bug#14521864: MYSQL 5.1 TO 5.5 BUGS PARTITIONING"
* introduce LOCK_share, now LOCK_ha_data is strictly for engines
* rea_create_table() always creates .par file (even in "frm-only" mode)
* fix a 5.6 bug, temp file leak on dummy ALTER TABLE
Base code and idea from a patch from by plinux at Taobao.
The idea is that we mark all memory that are thread specific with MY_THREAD_SPECIFIC.
Memory counting is done per thread in the my_malloc_size_cb_func callback function from my_malloc().
There are plenty of new asserts to ensure that for a debug server the counting is correct.
Information_schema.processlist gets two new columns: MEMORY_USED and EXAMINED_ROWS.
- The later is there mainly to show how query is progressing.
The following changes in interfaces was needed to get this to work:
- init_alloc_root() amd init_sql_alloc() has extra option so that one can mark memory with MY_THREAD_SPECIFIC
- One now have to use alloc_root_set_min_malloc() to set min memory to be allocated by alloc_root()
- my_init_dynamic_array() has extra option so that one can mark memory with MY_THREAD_SPECIFIC
- my_net_init() has extra option so that one can mark memory with MY_THREAD_SPECIFIC
- Added flag for hash_init() so that one can mark hash table to be thread specific.
- Added flags to init_tree() so that one can mark tree to be thread specific.
- Removed with_delete option to init_tree(). Now one should instead use MY_TREE_WITH_DELETE_FLAG.
- Added flag to Warning_info::Warning_info() if the structure should be fully initialized.
- String elements can now be marked as thread specific.
- Internal HEAP tables are now marking it's memory as MY_THREAD_SPECIFIC.
- Changed type of myf from int to ulong, as this is always a set of bit flags.
Other things:
- Removed calls to net_end() and thd->cleanup() as these are now done in ~THD()
- We now also show EXAMINED_ROWS in SHOW PROCESSLIST
- Added new variable 'memory_used'
- Fixed bug where kill_threads_for_user() was using the wrong mem_root to allocate memory.
- Removed calls to the obsoleted function init_dynamic_array()
- Use set_current_thd() instead of my_pthread_setspecific_ptr(THR_THD,...)
client/completion_hash.cc:
Updated call to init_alloc_root()
client/mysql.cc:
Updated call to init_alloc_root()
client/mysqlbinlog.cc:
init_dynamic_array() -> my_init_dynamic_array()
Updated call to init_alloc_root()
client/mysqlcheck.c:
Updated call to my_init_dynamic_array()
client/mysqldump.c:
Updated call to init_alloc_root()
client/mysqltest.cc:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
Fixed compiler warnings
extra/comp_err.c:
Updated call to my_init_dynamic_array()
extra/resolve_stack_dump.c:
Updated call to my_init_dynamic_array()
include/hash.h:
Added HASH_THREAD_SPECIFIC
include/heap.h:
Added flag is internal temporary table.
include/my_dir.h:
Safety fix: Ensure that MY_DONT_SORT and MY_WANT_STAT don't interfer with other mysys flags
include/my_global.h:
Changed type of myf from int to ulong, as this is always a set of bit flags.
include/my_sys.h:
Added MY_THREAD_SPECIFIC and MY_THREAD_MOVE
Added malloc_flags to DYNAMIC_ARRAY
Added extra mysys flag argument to my_init_dynamic_array()
Removed deprecated functions init_dynamic_array() and my_init_dynamic_array.._ci
Updated paramaters for init_alloc_root()
include/my_tree.h:
Added my_flags to allow one to use MY_THREAD_SPECIFIC with hash tables.
Removed with_delete. One should now instead use MY_TREE_WITH_DELETE_FLAG
Updated parameters to init_tree()
include/myisamchk.h:
Added malloc_flags to allow one to use MY_THREAD_SPECIFIC for checks.
include/mysql.h:
Added MYSQL_THREAD_SPECIFIC_MALLOC
Used 'unused1' to mark memory as thread specific.
include/mysql.h.pp:
Updated file
include/mysql_com.h:
Used 'unused1' to mark memory as thread specific.
Updated parameters for my_net_init()
libmysql/libmysql.c:
Updated call to init_alloc_root() to mark memory thread specific.
libmysqld/emb_qcache.cc:
Updated call to init_alloc_root()
libmysqld/lib_sql.cc:
Updated call to init_alloc_root()
mysql-test/r/create.result:
Updated results
mysql-test/r/user_var.result:
Updated results
mysql-test/suite/funcs_1/datadict/processlist_priv.inc:
Update to handle new format of SHOW PROCESSLIST
mysql-test/suite/funcs_1/datadict/processlist_val.inc:
Update to handle new format of SHOW PROCESSLIST
mysql-test/suite/funcs_1/r/is_columns_is.result:
Update to handle new format of SHOW PROCESSLIST
mysql-test/suite/funcs_1/r/processlist_priv_no_prot.result:
Updated results
mysql-test/suite/funcs_1/r/processlist_val_no_prot.result:
Updated results
mysql-test/t/show_explain.test:
Fixed usage of debug variable so that one can run test with --debug
mysql-test/t/user_var.test:
Added test of memory_usage variable.
mysys/array.c:
Added extra my_flags option to init_dynamic_array() and init_dynamic_array2() so that one can mark memory with MY_THREAD_SPECIFIC
All allocated memory is marked with the given my_flags.
Removed obsolete function init_dynamic_array()
mysys/default.c:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
mysys/hash.c:
Updated call to my_init_dynamic_array_ci().
Allocated memory is marked with MY_THREAD_SPECIFIC if HASH_THREAD_SPECIFIC is used.
mysys/ma_dyncol.c:
init_dynamic_array() -> my_init_dynamic_array()
Added #if to get rid of compiler warnings
mysys/mf_tempdir.c:
Updated call to my_init_dynamic_array()
mysys/my_alloc.c:
Added extra parameter to init_alloc_root() so that one can mark memory with MY_THREAD_SPECIFIC
Extend MEM_ROOT with a flag if memory is thread specific.
This is stored in block_size, to keep the size of the MEM_ROOT object identical as before.
Allocated memory is marked with MY_THREAD_SPECIFIC if used with init_alloc_root()
mysys/my_chmod.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_chsize.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_copy.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_create.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_delete.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_error.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_fopen.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_fstream.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_getwd.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_lib.c:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
Updated DBUG_PRINT because of change of myf type
mysys/my_lock.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_malloc.c:
Store at start of each allocated memory block the size of the block and if the block is thread specific.
Call malloc_size_cb_func, if set, with the memory allocated/freed.
Updated DBUG_PRINT because of change of myf type
mysys/my_open.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_pread.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_read.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_redel.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_rename.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_seek.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_sync.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_thr_init.c:
Ensure that one can call my_thread_dbug_id() even if thread is not properly initialized.
mysys/my_write.c:
Updated DBUG_PRINT because of change of myf type
mysys/mysys_priv.h:
Updated parameters to sf_malloc and sf_realloc()
mysys/safemalloc.c:
Added checking that for memory marked with MY_THREAD_SPECIFIC that it's the same thread that is allocation and freeing the memory.
Added sf_malloc_dbug_id() to allow MariaDB to specify which THD is handling the memory.
Added my_flags arguments to sf_malloc() and sf_realloc() to be able to mark memory with MY_THREAD_SPECIFIC.
Added sf_report_leaked_memory() to get list of memory not freed by a thread.
mysys/tree.c:
Added flags to init_tree() so that one can mark tree to be thread specific.
Removed with_delete option to init_tree(). Now one should instead use MY_TREE_WITH_DELETE_FLAG.
Updated call to init_alloc_root()
All allocated memory is marked with the given malloc flags
mysys/waiting_threads.c:
Updated call to my_init_dynamic_array()
sql-common/client.c:
Updated call to init_alloc_root() and my_net_init() to mark memory thread specific.
Updated call to my_init_dynamic_array().
Added MYSQL_THREAD_SPECIFIC_MALLOC so that client can mark memory as MY_THREAD_SPECIFIC.
sql-common/client_plugin.c:
Updated call to init_alloc_root()
sql/debug_sync.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/event_scheduler.cc:
Removed calls to net_end() as this is now done in ~THD()
Call set_current_thd() to ensure that memory is assigned to right thread.
sql/events.cc:
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/filesort.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/filesort_utils.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/ha_ndbcluster.cc:
Updated call to init_alloc_root()
Updated call to my_net_init()
Removed calls to net_end() and thd->cleanup() as these are now done in ~THD()
sql/ha_ndbcluster_binlog.cc:
Updated call to my_net_init()
Updated call to init_sql_alloc()
Removed calls to net_end() and thd->cleanup() as these are now done in ~THD()
sql/ha_partition.cc:
Updated call to init_alloc_root()
sql/handler.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
Added missing call to my_dir_end()
sql/item_func.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/item_subselect.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/item_sum.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/log.cc:
More DBUG
Updated call to init_alloc_root()
sql/mdl.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/mysqld.cc:
Added total_memory_used
Updated call to init_alloc_root()
Move mysql_cond_broadcast() before my_thread_end()
Added mariadb_dbug_id() to count memory per THD instead of per thread.
Added my_malloc_size_cb_func() callback function for my_malloc() to count memory.
Move initialization of mysqld_server_started and mysqld_server_initialized earlier.
Updated call to my_init_dynamic_array().
Updated call to my_net_init().
Call my_pthread_setspecific_ptr(THR_THD,...) to ensure that memory is assigned to right thread.
Added status variable 'memory_used'.
Updated call to init_alloc_root()
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/mysqld.h:
Added set_current_thd()
sql/net_serv.cc:
Added new parameter to my_net_init() so that one can mark memory with MY_THREAD_SPECIFIC.
Store in net->thread_specific_malloc if memory is thread specific.
Mark memory to be thread specific if requested.
sql/opt_range.cc:
Updated call to my_init_dynamic_array()
Updated call to init_sql_alloc()
Added MY_THREAD_SPECIFIC to allocated memory.
sql/opt_subselect.cc:
Updated call to init_sql_alloc() to mark memory thread specific.
sql/protocol.cc:
Fixed compiler warning
sql/records.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/rpl_filter.cc:
Updated call to my_init_dynamic_array()
sql/rpl_handler.cc:
Updated call to my_init_dynamic_array2()
sql/rpl_handler.h:
Updated call to init_sql_alloc()
sql/rpl_mi.cc:
Updated call to my_init_dynamic_array()
sql/rpl_tblmap.cc:
Updated call to init_alloc_root()
sql/rpl_utility.cc:
Updated call to my_init_dynamic_array()
sql/slave.cc:
Initialize things properly before calling functions that allocate memory.
Removed calls to net_end() as this is now done in ~THD()
sql/sp_head.cc:
Updated call to init_sql_alloc()
Updated call to my_init_dynamic_array()
Added parameter to warning_info() that it should be fully initialized.
sql/sp_pcontext.cc:
Updated call to my_init_dynamic_array()
sql/sql_acl.cc:
Updated call to init_sql_alloc()
Updated call to my_init_dynamic_array()
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_admin.cc:
Added parameter to warning_info() that it should be fully initialized.
sql/sql_analyse.h:
Updated call to init_tree() to mark memory thread specific.
sql/sql_array.h:
Updated call to my_init_dynamic_array() to mark memory thread specific.
sql/sql_audit.cc:
Updated call to my_init_dynamic_array()
sql/sql_base.cc:
Updated call to init_sql_alloc()
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_cache.cc:
Updated comment
sql/sql_class.cc:
Added parameter to warning_info() that not initialize it until THD is fully created.
Updated call to init_sql_alloc()
Mark THD::user_vars has to be thread specific.
Updated call to my_init_dynamic_array()
Ensure that memory allocated by THD is assigned to the THD.
More DBUG
Always acll net_end() in ~THD()
Assert that all memory signed to this THD is really deleted at ~THD.
Fixed set_status_var_init() to not reset memory_used.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_class.h:
Added MY_THREAD_SPECIFIC to allocated memory.
Added malloc_size to THD to record allocated memory per THD.
sql/sql_delete.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/sql_error.cc:
Added 'initialize' parameter to Warning_info() to say if should allocate memory for it's structures.
This is used by THD::THD() to not allocate memory until THD is ready.
Added Warning_info::free_memory()
sql/sql_error.h:
Updated Warning_info() class.
sql/sql_handler.cc:
Updated call to init_alloc_root() to mark memory thread specific.
sql/sql_insert.cc:
More DBUG
sql/sql_join_cache.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/sql_lex.cc:
Updated call to my_init_dynamic_array()
sql/sql_lex.h:
Updated call to my_init_dynamic_array()
sql/sql_load.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/sql_parse.cc:
Removed calls to net_end() and thd->cleanup() as these are now done in ~THD()
Ensure that examined_row_count() is reset before query.
Fixed bug where kill_threads_for_user() was using the wrong mem_root to allocate memory.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
Don't restore thd->status_var.memory_used when restoring thd->status_var
sql/sql_plugin.cc:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
Don't allocate THD on the stack, as this causes problems with valgrind when doing thd memory counting.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_prepare.cc:
Added parameter to warning_info() that it should be fully initialized.
Updated call to init_sql_alloc() to mark memory thread specific.
sql/sql_reload.cc:
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_select.cc:
Updated call to my_init_dynamic_array() and init_sql_alloc() to mark memory thread specific.
Added MY_THREAD_SPECIFIC to allocated memory.
More DBUG
sql/sql_servers.cc:
Updated call to init_sql_alloc() to mark memory some memory thread specific.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_show.cc:
Updated call to my_init_dynamic_array()
Mark my_dir() memory thread specific.
Use my_pthread_setspecific_ptr(THR_THD,...) to mark that allocated memory should be allocated to calling thread.
More DBUG.
Added malloc_size and examined_row_count to SHOW PROCESSLIST.
Added MY_THREAD_SPECIFIC to allocated memory.
Updated call to init_sql_alloc()
Added parameter to warning_info() that it should be fully initialized.
sql/sql_statistics.cc:
Fixed compiler warning
sql/sql_string.cc:
String elements can now be marked as thread specific.
sql/sql_string.h:
String elements can now be marked as thread specific.
sql/sql_table.cc:
Updated call to init_sql_alloc() and my_malloc() to mark memory thread specific
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
Fixed compiler warning
sql/sql_test.cc:
Updated call to my_init_dynamic_array() to mark memory thread specific.
sql/sql_trigger.cc:
Updated call to init_sql_alloc()
sql/sql_udf.cc:
Updated call to init_sql_alloc()
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_update.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/table.cc:
Updated call to init_sql_alloc().
Mark memory used by temporary tables, that are not for slave threads, as MY_THREAD_SPECIFIC
Updated call to init_sql_alloc()
sql/thr_malloc.cc:
Added my_flags argument to init_sql_alloc() to be able to mark memory as MY_THREAD_SPECIFIC.
sql/thr_malloc.h:
Updated prototype for init_sql_alloc()
sql/tztime.cc:
Updated call to init_sql_alloc()
Updated call to init_alloc_root() to mark memory thread specific.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/uniques.cc:
Updated calls to init_tree(), my_init_dynamic_array() and my_malloc() to mark memory thread specific.
sql/unireg.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
storage/csv/ha_tina.cc:
Updated call to init_alloc_root()
storage/federated/ha_federated.cc:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
Ensure that memory allocated by fedarated is registered for the system, not for the thread.
storage/federatedx/federatedx_io_mysql.cc:
Updated call to my_init_dynamic_array()
storage/federatedx/ha_federatedx.cc:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
storage/heap/ha_heap.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
storage/heap/heapdef.h:
Added parameter to hp_get_new_block() to be able to do thread specific memory tagging.
storage/heap/hp_block.c:
Added parameter to hp_get_new_block() to be able to do thread specific memory tagging.
storage/heap/hp_create.c:
- Internal HEAP tables are now marking it's memory as MY_THREAD_SPECIFIC.
- Use MY_TREE_WITH_DELETE instead of removed option 'with_delete'.
storage/heap/hp_open.c:
Internal HEAP tables are now marking it's memory as MY_THREAD_SPECIFIC.
storage/heap/hp_write.c:
Added new parameter to hp_get_new_block()
storage/maria/ma_bitmap.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_blockrec.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_check.c:
Updated call to init_alloc_root()
storage/maria/ma_ft_boolean_search.c:
Updated calls to init_tree() and init_alloc_root()
storage/maria/ma_ft_nlq_search.c:
Updated call to init_tree()
storage/maria/ma_ft_parser.c:
Updated call to init_tree()
Updated call to init_alloc_root()
storage/maria/ma_loghandler.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_open.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_sort.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_write.c:
Updated calls to my_init_dynamic_array() and init_tree()
storage/maria/maria_pack.c:
Updated call to init_tree()
storage/maria/unittest/sequence_storage.c:
Updated call to my_init_dynamic_array()
storage/myisam/ft_boolean_search.c:
Updated call to init_tree()
Updated call to init_alloc_root()
storage/myisam/ft_nlq_search.c:
Updated call to init_tree()
storage/myisam/ft_parser.c:
Updated call to init_tree()
Updated call to init_alloc_root()
storage/myisam/ft_stopwords.c:
Updated call to init_tree()
storage/myisam/mi_check.c:
Updated call to init_alloc_root()
storage/myisam/mi_write.c:
Updated call to my_init_dynamic_array()
Updated call to init_tree()
storage/myisam/myisamlog.c:
Updated call to init_tree()
storage/myisam/myisampack.c:
Updated call to init_tree()
storage/myisam/sort.c:
Updated call to my_init_dynamic_array()
storage/myisammrg/ha_myisammrg.cc:
Updated call to init_sql_alloc()
storage/perfschema/pfs_check.cc:
Rest current_thd
storage/perfschema/pfs_instr.cc:
Removed DBUG_ENTER/DBUG_VOID_RETURN as at this point my_thread_var is not allocated anymore, which can cause problems.
support-files/compiler_warnings.supp:
Disable compiler warning from offsetof macro.
and small collateral changes
mysql-test/lib/My/Test.pm:
somehow with "print" we get truncated writes sometimes
mysql-test/suite/perfschema/r/digest_table_full.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/dml_handler.result:
host table is not ported over yet
mysql-test/suite/perfschema/r/information_schema.result:
host table is not ported over yet
mysql-test/suite/perfschema/r/nesting.result:
this differs, because we don't rewrite general log queries, and multi-statement
packets are logged as a one entry. this result file is identical to what mysql-5.6.5
produces with the --log-raw option.
mysql-test/suite/perfschema/r/relaylog.result:
MariaDB modifies the binlog index file directly, while MySQL 5.6 has a feature "crash-safe binlog index" and modifies a special "crash-safe" shadow copy of the index file and then moves it over. That's why this test shows "NONE" index file writes in MySQL and "MANY" in MariaDB.
mysql-test/suite/perfschema/r/server_init.result:
MariaDB initializes the "manager" resources from the "manager" thread, and starts this thread only when --flush-time is not 0. MySQL 5.6 initializes "manager" resources unconditionally on server startup.
mysql-test/suite/perfschema/r/stage_mdl_global.result:
this differs, because MariaDB disables query cache when query_cache_size=0. MySQL does not
do that, and this causes useless mutex locks and waits.
mysql-test/suite/perfschema/r/statement_digest.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/statement_digest_consumers.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/statement_digest_long_query.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/rpl/r/rpl_mixed_drop_create_temp_table.result:
will be updated to match 5.6 when alfranio.correia@oracle.com-20110512172919-c1b5kmum4h52g0ni and anders.song@greatopensource.com-20110105052107-zoab0bsf5a6xxk2y are merged
mysql-test/suite/rpl/r/rpl_non_direct_mixed_mixing_engines.result:
will be updated to match 5.6 when anders.song@greatopensource.com-20110105052107-zoab0bsf5a6xxk2y is merged
sql/sql_insert.cc:
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
******
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
sql/sql_table.cc:
small cleanup
******
small cleanup
- Fixed some issues with partitions and connection_string, which also fixed lp:716890 "Pre- and post-recovery crash in Aria"
- Fixed wrong assert in Aria
Now need to merge with latest xtradb before pushing
sql/ha_partition.cc:
Ensure that m_ordered_rec_buffer is not freed before close.
sql/mysqld.cc:
Changed to use opt_stack_trace instead of opt_pstack.
Removed references to pstack
sql/partition_element.h:
Ensure that connect_string is initialized
storage/maria/ma_key_recover.c:
Fixed wrong assert
if max_allowed_packet >= 16M.
This bug was introduced by patch for bug#42503.
This patch restores behaviour that there was before patch
for bug#42503 was applied.
sql/net_serv.cc:
Restored original right condition.
if max_allowed_packet >= 16M.
This bug was introduced by patch for bug#42503.
This patch restores behaviour that there was before patch
for bug#42503 was applied.
It includes speed optimizations for HANDLER READ by caching as much as possible in HANDLER OPEN
Other things:
- Added mysqld option --disable-thr-alarm to be able to benchmark things without thr_alarm
- Changed 'Locked' state to 'System lock' and 'Table lock' (these where used in the code but never shown to end user)
- Better error message if mysql_install_db.sh fails
- Moved handler function prototypes to sql_handler.h
- Remove not anymore used 'thd->locked' member
include/thr_alarm.h:
Added my_disable_thr_alarm
include/thr_lock.h:
Add new member to THR_LOCK_DATA to remember original lock type state. This is needed as thr_unlock() resets type to TL_UNLOCK.
mysql-test/include/check_no_concurrent_insert.inc:
Locked -> Table lock
mysql-test/include/handler.inc:
Locked -> Table lock
mysql-test/r/handler_innodb.result:
Updated results for new tests
mysql-test/r/handler_myisam.result:
Updated results for new tests
mysql-test/r/sp-threads.result:
Locked -> Table lock
mysql-test/suite/binlog/t/binlog_stm_row.test:
Locked -> Table lock
mysql-test/suite/funcs_1/datadict/processlist_val.inc:
Locked -> Table lock
mysql-test/suite/pbxt/t/lock_multi.test:
Locked -> Table lock
mysql-test/suite/sys_vars/r/concurrent_insert_func.result:
Locked -> Table lock
mysql-test/suite/sys_vars/t/concurrent_insert_func.test:
Locked -> Table lock
mysql-test/suite/sys_vars/t/delayed_insert_limit_func.test:
Locked -> Table lock
mysql-test/suite/sys_vars/t/query_cache_wlock_invalidate_func.test:
Locked -> Table lock
mysql-test/suite/sys_vars/t/sql_low_priority_updates_func.test:
Locked -> Table lock
mysql-test/t/insert_notembedded.test:
Locked -> Table lock
mysql-test/t/lock_multi.test:
Locked -> Table lock
mysql-test/t/merge-big.test:
Locked -> Table lock
mysql-test/t/multi_update.test:
Locked -> Table lock
mysql-test/t/query_cache_28249.test:
Locked -> Table lock
mysql-test/t/sp_notembedded.test:
Locked -> Table lock
mysql-test/t/sp_sync.test:
Locked -> Table lock
mysql-test/t/status.test:
Locked -> Table lock
mysql-test/t/trigger_notembedded.test:
Locked -> Table lock
mysys/thr_alarm.c:
Added option to disable thr_alarm
mysys/thr_lock.c:
Detect loops
scripts/mysql_install_db.sh:
Give better error message if something goes wrong
sql/Makefile.am:
Added sql_handler.h
sql/lock.cc:
Split functions to allow one to cache value if store_lock() (for HANDLER functions).
- Split mysql_lock_tables() into two functions, where first one allocates MYSQL_LOCK and other other one uses it.
- Made get_lock_data() an external function.
- Added argument to mysql_unlock_tables() to not free sql_lock.
- Added argument to reset_lock_data() to reset lock structure to initial state (as after get_lock_data())
sql/mysql_priv.h:
Moved handler function prototypes to sql_handler.h
Added new lock functions.
sql/mysqld.cc:
Added --thread-alarm startup option
sql/net_serv.cc:
Don't call vio_blocking() if not needed
sql/sql_base.cc:
include sql_handler.h
sql/sql_class.cc:
include sql_handler.h
Remove not anymore used 'thd->locked' member
sql/sql_class.h:
Remove not anymore used 'thd->locked' member
sql/sql_db.cc:
include sql_handler.h
sql/sql_delete.cc:
include sql_handler.h
sql/sql_handler.cc:
Rewrote all code to use SQL_HANDLER instead of TABLE_LIST (original interface)
Rewrote mysql_ha_open() to cache all things from TABLE_LIST and items for field list, where etc.
In mysql_ha_open() also cache MYSQL_LOCK structure from get_lock_data().
Split functions into smaller sub functions (needed to be able to implement mysql_ha_read_prepare())
Added mysql_ha_read_prepare() to allow one to prepare HANDLER READ.
sql/sql_handler.h:
Interface to sql_handler.cc
sql/sql_parse.cc:
include sql_handler.h
sql/sql_prepare.cc:
Added mysql_test_handler_read(), prepare for HANDLER READ
sql/sql_rename.cc:
include sql_handler.h
sql/sql_show.cc:
Removed usage of thd->locked
sql/sql_table.cc:
include sql_handler.h
sql/sql_trigger.cc:
include sql_handler.h
