Some fixes related to commit f838b2d799 and
Rows_log_event::do_apply_event() and Update_rows_log_event::do_exec_row()
for system-versioned tables were provided by Nikita Malyavin.
This was required by test versioning.rpl,trx_id,row.
When using semi-sync replication with
rpl_semi_sync_master_wait_point=AFTER_COMMIT, the performance of the
primary can significantly reduce compared to AFTER_SYNC's
performance for workloads with many concurrent users executing
transactions. This is because all connections on the primary share
the same cond_wait variable/mutex pair, so any time an ACK is
received from a replica, all waiting connections are awoken to check
if the ACK was for itself, which is done in mutual exclusion.
This patch changes this such that the waiting THD will use its own
local condition variable, and the ACK receiver thread only signals
connections which have been ACKed for wakeup. That is, the
THD::LOCK_wakeup_ready condition variable is re-used for this
purpose, and the Active_tranx queue nodes are extended to hold the
waiting thread, so it can be signalled once ACKed.
Additionally:
1) Removed part of MDEV-11853 additions, which allowed suspended
connection threads awaiting their semi-sync ACKs to live until their
ACKs had been received. This part, however, wasn't needed. That is,
all that was needed was for the Ack_thread to survive. So now the
connection threads are killed during phase 1. Thereby
THD::is_awaiting_semisync_ack, and all its related code was removed.
2) COND_binlog_send is repurposed to signal on the condition when
Active_tranx is emptied during clear_active_tranx_nodes.
3) At master shutdown (when waiting for slaves), instead of the
main loop individually waiting for each ACK, await_slave_reply()
(renamed await_all_slave_replies()) just waits once for the
repurposed COND_binlog_send to signal it is empty.
4) Test rpl_semi_sync_shutdown_await_ack is updates as following:
4.1) Added test case (adapted from Kristian Nielsen) to ensure
that if a thread awaiting its ACK is killed while SHUTDOWN WAIT FOR
ALL SLAVES is issued, the primary will still wait for the ACK from
the killed thread.
4.2) As connections which by-passed phase 1 of thread killing no
longer are delayed for kill until phase 2, we can no longer query
yes/no tx after receiving an ACK/timeout. The check for these
variables is removed.
4.3) Comment descriptions are updated which mention that the
connection is alive; and adjusted to be the Ack_thread.
Reviewed By:
============
Kristian Nielsen <knielsen@knielsen-hq.org>
Remove work-around that disables bulk insert optimization in replication
The root cause of the original problem is now fixed (MDEV-33475). Though the
bulk insert optimization will still be disabled in replication, as it is
only enabled in special circumstances meant for loading a mysqldump.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
MDEV-33308 CHECK TABLE is modifying .frm file even if --read-only
As noted in commit d0ef1aaf61,
MySQL as well as older versions of MariaDB server would during
ALTER TABLE ... IMPORT TABLESPACE write bogus values to the
PAGE_MAX_TRX_ID field to pages of the clustered index, instead of
letting that field remain 0.
In commit 8777458a6e this field
was repurposed for PAGE_ROOT_AUTO_INC in the clustered index root page.
To avoid trouble when upgrading from MySQL or older versions of MariaDB,
we will try to detect and correct bogus values of PAGE_ROOT_AUTO_INC
when opening a table for the first time from the SQL layer.
btr_read_autoinc_with_fallback(): Add the parameters to mysql_version,max
to indicate the TABLE_SHARE::mysql_version of the .frm file and the
maximum value allowed for the type of the AUTO_INCREMENT column.
In case the table was originally created in MySQL or an older version of
MariaDB, read also the maximum value of the AUTO_INCREMENT column from
the table and reset the PAGE_ROOT_AUTO_INC if it is above the limit.
dict_table_t::get_index(const dict_col_t &) const: Find an index that
starts with the specified column.
ha_innobase::check_for_upgrade(): Return HA_ADMIN_FAILED if InnoDB
needs upgrading but is in read-only mode. In this way, the call to
update_frm_version() will be skipped.
row_import_autoinc(): Adjust the AUTO_INCREMENT column at the end of
ALTER TABLE...IMPORT TABLESPACE. This refinement was suggested by
Debarun Banerjee.
The changes outside InnoDB were developed by Michael 'Monty' Widenius:
Added print_check_msg() service for easy reporting of check/repair messages
in ENGINE=Aria and ENGINE=InnoDB.
Fixed that CHECK TABLE do not update the .frm file under --read-only.
Added 'handler_flags' to HA_CHECK_OPT as a way for storage engines to
store state from handler::check_for_upgrade().
Reviewed by: Debarun Banerjee
Most things where wrong in the test suite.
The one thing that was a bug was that table_map_id was in some places
defined as ulong and in other places as ulonglong. On Linux 64 bit this
is not a problem as ulong == ulonglong, but on windows this caused failures.
Fixed by ensuring that all instances of table_map_id are ulonglong.
rpl_semi_sync_slave_enabled_consistent.test and the first part of
the commit message comes from Brandon Nesterenko.
A test to show how to induce the "Read semi-sync reply magic number
error" message on a primary. In short, if semi-sync is turned on
during the hand-shake process between a primary and replica, but
later a user negates the rpl_semi_sync_slave_enabled variable while
the replica's IO thread is running; if the io thread exits, the
replica can skip a necessary call to kill_connection() in
repl_semisync_slave.slave_stop() due to its reliance on a global
variable. Then, the replica will send a COM_QUIT packet to the
primary on an active semi-sync connection, causing the magic number
error.
The test in this patch exits the IO thread by forcing an error;
though note a call to STOP SLAVE could also do this, but it ends up
needing more synchronization. That is, the STOP SLAVE command also
tries to kill the VIO of the replica, which makes a race with the IO
thread to try and send the COM_QUIT before this happens (which would
need more debug_sync to get around). See THD::awake_no_mutex for
details as to the killing of the replica’s vio.
Notes:
- The MariaDB documentation does not make it clear that when one
enables semi-sync replication it does not matter if one enables
it first in the master or slave. Any order works.
Changes done:
- The rpl_semi_sync_slave_enabled variable is now a default value for
when semisync is started. The variable does not anymore affect
semisync if it is already running. This fixes the original reported
bug. Internally we now use repl_semisync_slave.get_slave_enabled()
instead of rpl_semi_sync_slave_enabled. To check if semisync is
active on should check the @@rpl_semi_sync_slave_status variable (as
before).
- The semisync protocol conflicts in the way that the original
MySQL/MariaDB client-server protocol was designed (client-server
send and reply packets are strictly ordered and includes a packet
number to allow one to check if a packet is lost). When using
semi-sync the master and slave can send packets at 'any time', so
packet numbering does not work. The 'solution' has been that each
communication starts with packet number 1, but in some cases there
is still a chance that the packet number check can fail. Fixed by
adding a flag (pkt_nr_can_be_reset) in the NET struct that one can
use to signal that packet number checking should not be done. This
is flag is set when semi-sync is used.
- Added Master_info::semi_sync_reply_enabled to allow one to configure
some slaves with semisync and other other slaves without semisync.
Removed global variable semi_sync_need_reply that would not work
with multi-master.
- Repl_semi_sync_master::report_reply_packet() can now recognize
the COM_QUIT packet from semisync slave and not give a
"Read semi-sync reply magic number error" error for this case.
The slave will be removed from the Ack listener.
- On Windows, don't stop semisync Ack listener just because one
slave connection is using socket_id > FD_SETSIZE.
- Removed busy loop in Ack_receiver::run() by using
"Self-pipe trick" to signal new slave and stop Ack_receiver.
- Changed some Repl_semi_sync_slave functions that always returns 0
from int to void.
- Added Repl_semi_sync_slave::slave_reconnect().
- Removed dummy_function Repl_semi_sync_slave::reset_slave().
- Removed some duplicate semisync notes from the error log.
- Add test of "if (get_slave_enabled() && semi_sync_need_reply)"
before calling Repl_semi_sync_slave::slave_reply().
(Speeds up the code as we can skip all initializations).
- If epl_semisync_slave.slave_reply() fails, we disable semisync
for that connection.
- We do not call semisync.switch_off() if there are no active slaves.
Instead we check in Repl_semi_sync_master::commit_trx() if there are
no active threads. This simplices the code.
- Changed assert() to DBUG_ASSERT() to ensure that the DBUG log is
flushed in case of asserts.
- Removed the internal rpl_semi_sync_slave_status as it is not needed
anymore. The @@rpl_semi_sync_slave_status status variable is now
mapped to rpl_semi_sync_enabled.
- Removed rpl_semi_sync_slave_enabled as it is not needed anymore.
Repl_semi_sync_slave::get_slave_enabled() contains the active status.
- Added checking that we do not add a slave twice with
Ack_receiver::add_slave(). This could happen with old code.
- Removed Repl_semi_sync_master::check_and_switch() as it is not
needed anymore.
- Ensure that when we call Ack_receiver::remove_slave() that the slave
is removed from the listener before function returns.
- Call listener.listen_on_sockets() outside of mutex for better
performance and less contested mutex.
- Ensure that listening is ignoring newly added slaves when checking for
responses.
- Fixed the master ack_receiver listener is not killed if there are no
connected slaves (and thus stop semisync handling of future
connections). This could happen if all slaves sockets where would be
marked as unreliable.
- Added unlink() to base_ilist_iterator and remove() to
I_List_iterator. This enables us to remove 'dead' slaves in
Ack_recever::run().
- kill_zombie_dump_threads() now does killing of dump threads properly.
- It can now kill several threads (should be impossible but could
happen if IO slaves reconnects very fast).
- We now wait until the dump thread is done before starting the
dump.
- Added an error if kill_zombie_dump_threads() fails.
- Set thd->variables.server_id before calling
kill_zombie_dump_threads(). This simplies the code.
- Added a lot of comments both in code and tests.
- Removed DBUG_EVALUATE_IF "failed_slave_start" as it is not used.
Test changes:
- rpl.rpl_session_var2 added which runs rpl.rpl_session_var test with
semisync enabled.
- Some timings changed slight with startup of slave which caused
rpl_binlog_dump_slave_gtid_state_info.text to fail as it checked the
error log file before the slave had started properly. Fixed by
adding wait_for_pattern_in_file.inc that allows waiting for the
pattern to appear in the log file.
- Tests have been updated so that we first set
rpl_semi_sync_master_enabled on the master and then set
rpl_semi_sync_slave_enabled on the slaves (this is according to how
the MariaDB documentation document how to setup semi-sync).
- Error text "Master server does not have semi-sync enabled" has been
replaced with "Master server does not support semi-sync" for the
case when the master supports semi-sync but semi-sync is not
enabled.
Other things:
- Some trivial cleanups in Repl_semi_sync_master::update_sync_header().
- We should in 11.3 changed the default value for
rpl-semi-sync-master-wait-no-slave from TRUE to FALSE as the TRUE
does not make much sense as default. The main difference with using
FALSE is that we do not wait for semisync Ack if there are no slave
threads. In the case of TRUE we wait once, which did not bring any
notable benefits except slower startup of master configured for
using semisync.
Co-author: Brandon Nesterenko <brandon.nesterenko@mariadb.com>
This solves the problem reported in MDEV-32960 where a new
slave may not be registered in time and the master disables
semi sync because of that.
initialize THD::rand in THD::init() not in THD::THD(),
because the former is also called when a THD is reused -
in COM_CHANGE_USER and in taking a THD from the cache.
Also use current cycle timer for more unpreditability
The reason for this change are the following:
- If we call set_killed() from one thread to kill another thread with
a message, there may be concurrent usage of the MEM_ROOT which is
not supported (this could cause memory corruption).
We do not currently have code that does this, but the API allows this
and it is better to be fix the issue before it happens.
- The per thread memory tracking does not work if one thread uses
another threads MEM_ROOT.
- set_killed() can be called if a MEM_ROOT allocation fails. In this case
it is not good to try to allocate more memory from potentially the same
MEM_ROOT.
Fix is to use my_malloc() instead of mem_root for killed messages.
After successful connection, server always sets SERVER_STATUS_AUTOCOMMIT
in server_status in the OK packet. This is wrong, if global variable
autocommit=0.
Fixed THD::init(), added mysql_client_test test.
Thanks to Diego Dupin for the providing the patch.
Signed-off-by: Vladislav Vaintroub <vvaintroub@gmail.com>
Checking for kill with thd_kill_level() or check_killed() runs apc
requests, which takes the LOCK_thd_kill mutex. But this is dangerous,
as checking for kill needs to be called while holding many different
mutexes, and can lead to cyclic mutex dependency and deadlock.
But running apc is only "best effort", so skip running the apc if the
LOCK_thd_kill is not available. The apc will then be run on next check
of kill signal.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
In some cases "SHOW PROCESSLIST" could show "Reset for next command"
as State, even if the previous query had finished properly.
Fixed by clearing State after end of command and also setting the State
for the "Connect" command.
Other things:
- Changed usage of 'thd->set_command(COM_SLEEP)' to
'thd->mark_connection_idle()'.
- Changed thread_state_info() to return "" instead of NULL. This is
just a safety measurement and in line with the logic of the
rest of the function.
Binary logging is now disabled for the queries run by SQL SERVICE.
The binlogging can be turned on with the 'SET SQL_LOG_BIN=On' query.
Conflicts:
sql/sql_prepare.cc
Conflicts:
sql/sql_prepare.cc
don't forget to reset mdl_context.m_deadlock_overweight when
taking the THD out of the cache - the history of previous connections
should not affect the weight in deadlock victim selection
(small cleanup of the test to help the correct merge)
The MDEV-29693 conflict resolution is from Monty, as well as is
a bug fix where ANALYZE TABLE wrongly built histograms for
single-column PRIMARY KEY.
Also includes a fix for safe_malloc error reporting.
Other things:
- Copied main.log_slow from 10.4 to avoid mtr issue
Disabled test:
- spider/bugfix.mdev_27239 because we started to get
+Error 1429 Unable to connect to foreign data source: localhost
-Error 1158 Got an error reading communication packets
- main.delayed
- Bug#54332 Deadlock with two connections doing LOCK TABLE+INSERT DELAYED
This part is disabled for now as it fails randomly with different
warnings/errors (no corruption).
Raise notes if indexes cannot be used:
- in case of data type or collation mismatch (diferent error messages).
- in case if a table field was replaced to something else
(e.g. Item_func_conv_charset) during a condition rewrite.
Added option to write warnings and notes to the slow query log for
slow queries.
New variables added/changed:
- note_verbosity, with is a set of the following options:
basic - All old notes
unusable_keys - Print warnings about keys that cannot be used
for select, delete or update.
explain - Print unusable_keys warnings for EXPLAIN querys.
The default is 'basic,explain'. This means that for old installations
the only notable new behavior is that one will get notes about
unusable keys when one does an EXPLAIN for a query. One can turn all
of all notes by either setting note_verbosity to "" or setting sql_notes=0.
- log_slow_verbosity has a new option 'warnings'. If this is set
then warnings and notes generated are printed in the slow query log
(up to log_slow_max_warnings times per statement).
- log_slow_max_warnings - Max number of warnings written to
slow query log.
Other things:
- One can now use =ALL for any 'set' variable to set all options at once.
For example using "note_verbosity=ALL" in a config file or
"SET @@note_verbosity=ALL' in SQL.
- mysqldump will in the future use @@note_verbosity=""' instead of
@sql_notes=0 to disable notes.
- Added "enum class Data_type_compatibility" and changing the return type
of all Field::can_optimize*() methods from "bool" to this new data type.
Reviewer & Co-author: Alexander Barkov <bar@mariadb.com>
- The code that prints out the notes comes mainly from Alexander
At the moment we cannot support
wsrep_forced_binlog_format=[MIXED|STATEMENT]
during CREATE TABLE AS SELECT.
Statement will use ROW instead and give
a warning.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Follow-up to fix issue with access to probably not-initialized mutex/cond_var
Constructor of the class st_debug_sync_globals was changed to initialize
the data members dsp_hits, dsp_executed, dsp_max_active with zero.
Formerly, these data members were filled with zeroes by C-runtime since
the variable debug_sync_global was declared as static and according with C rules
the static variable initialized with zero bytes.
By the same reason, the data members
debug_sync_global->ds_mutex
debug_sync_global->ds_cond
were initialized by zeros before the patch for MDEV-31871. After this patch
the memory for the synch primitives debug_sync_global->ds_mutex
and debug_sync_global->ds_cond are initialized explicitly by calling
the functions mysql_mutex_init/mysql_cond_init so access to these synch
primitives should be done only after such initialization be completed.
Guarded access to these synch primitives has been added to the function
debug_sync_end_thread() that is called on clean up since that was single
problem place detected by MSAN. Theoretically problem places located in the
function debug_sync_execute were not protected with similar check since
it is not obvious that the variables debug_sync_global->ds_mutex
and debug_sync_global->ds_cond could be not initilialized for use cases where
the function debug_sync_execute() is called. It is required additional study
to conclude whether it does need or not.
The problem was that parallel replication of temporary tables using
statement-based binlogging could overlap the COMMIT in one thread with a DML
or DROP TEMPORARY TABLE in another thread using the same temporary table.
Temporary tables are not safe for concurrent access, so this caused
reference to freed memory and possibly other nastiness.
The fix is to disable the optimisation with overlapping commits of one
transaction with the start of a later transaction, when temporary tables are
in use. Then the following event groups will be blocked from starting until
the one using temporary tables is completed.
This also fixes occasional test failures of rpl.rpl_parallel_temptable seen
in Buildbot.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Remove the exception that InnoDB does not report auto-increment locks waits
to the parallel replication.
There was an assumption that these waits could not cause conflicts with
in-order parallel replication and thus need not be reported. However, this
assumption is wrong and it is possible to get conflicts that lead to hangs
for the duration of --innodb-lock-wait-timeout. This can be seen with three
transactions:
1. T1 is waiting for T3 on an autoinc lock
2. T2 is waiting for T1 to commit
3. T3 is waiting on a normal row lock held by T2
Here, T3 needs to be deadlock killed on the wait by T1.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Restore code to make InnoDB choose the second transaction as a deadlock
victim if two transactions deadlock that need to commit in-order for
parallel replication. This code was erroneously removed when VATS was
implemented in InnoDB.
Also add a test case for InnoDB choosing the right deadlock victim.
Also fixes this bug, with testcase that reliably reproduces:
MDEV-28776: rpl.rpl_mark_optimize_tbl_ddl fails with timeout on sync_with_master
Reviewed-by: Marko Mäkelä <marko.makela@mariadb.com>
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Restore code to make InnoDB choose the second transaction as a deadlock
victim if two transactions deadlock that need to commit in-order for
parallel replication. This code was erroneously removed when VATS was
implemented in InnoDB.
Also add a test case for InnoDB choosing the right deadlock victim.
Also fixes this bug, with testcase that reliably reproduces:
MDEV-28776: rpl.rpl_mark_optimize_tbl_ddl fails with timeout on sync_with_master
Note: This should be null-merged to 10.6, as a different fix is needed
there due to InnoDB locking code changes.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
