... with wsrep_replicate_myisam enabled
Internal updates to system statistical tables could wrongly
trigger an additional total-order replication if wsrep_repli
-cate_myisam is enabled.
Fixed by adding a check to skip total-order replication for
stat tables.
for InnoDB tables"
Don't use thr_lock.c locks for InnoDB tables. Below is list of changes that
were needed to implement this:
- HANDLER OPEN acquireis MDL_SHARED_READ instead of MDL_SHARED
- HANDLER READ calls external_lock() even if SE is not going to be locked by
THR_LOCK
- InnoDB lock wait timeouts are now honored which are much shorter by default
than server lock wait timeouts (1 year vs 50 seconds)
- with @@autocommit= 1 LOCK TABLES disables autocommit implicitely, though
user still sees @@autocommt= 1
- the above starts implicit transaction
- transactions started by LOCK TABLES are now rolled back on disconnect
(previously everything was committed due to autocommit)
- transactions started by LOCK TABLES are now rolled back by ROLLBACK
(previously everything was committed due to autocommit)
- it is now impossible to change BINLOG_FORMAT under LOCK TABLES (at least
to statement) due to running transaction
- LOCK TABLES WRITE is additionally handled by MDL
- ...in contrast LOCK TABLES READ protection against DML is pure InnoDB
- combining transactional and non-transactional tables under LOCK TABLES
may cause rolled back changes in transactional table and "committed"
changes in non-transactional table
- user may disable innodb_table_locks, which will cause LOCK TABLES to be
noop basically
Removed tests for BUG#45143 and BUG#55930 which cover InnoDB + THR_LOCK. To
operate properly these tests require code flow to go through THR_LOCK debug
sync points, which is not the case after this patch. These tests are removed
by WL#6671 as well. An alternative is to port them to different storage engine.
Internal updates to system statistical tables could wrongly
trigger an additional total-order replication if wsrep_repli
-cate_myisam is enabled.
Fixed by adding a check to skip total-order replication for
stat tables.
Test: galera.galera_var_replicate_myisam_on
* revert part of the db7edfe that moved calculations from
fix_fields to val_str for Item_func_sysconst and descendants
* mark session state dependent functions in check_vcol_func_processor()
* re-run fix_fields for all such functions for every statement
* fix CURRENT_USER/CURRENT_ROLE not to use Name_resolution_context
(that is allocated on the stack in unpack_vcol_info_from_frm())
Note that NOW(), CURDATE(), etc use lazy initialization and do *not*
force fix_fields to be re-run. The rule is:
* lazy initialization is *not* allowed, if it changes metadata (so,
e.g. DAYNAME() cannot use it)
* lazy initialization is *preferrable* if it has side effects (e.g.
NOW() sets thd->time_zone_used=1, so it's better to do it when
the value of NOW is actually needed, not when NOW is simply prepared)
(like DROP TABLE) has been scheduled before conflicting DDL's (like INSERT)
are commited.
What makes these bugs hard to detect is that in most cases any wrong
schduling are caught by MDL locks. It's only when there are timing issues
that the bugs (usually deadlocks) are noticed.
This patch adds a DBUG_ASSERT() that detects, in parallel replication,
if a DDL is scheduled before any depending DML'S are commited.
It does this be checking if there are any conflicting replication locks
when the DDL is about to wait for getting it's MDL lock.
I also did some minor code cleanups in sql_base.cc to make this code
similar to other related code.
.. share->last_version' failed in myisam/mi_open.c:67: test_if_reopen
During the RENAME operation since the renamed temporary table is also
opened and added to myisam_open_list/maria_open_list, resetting the
last_version at the end of operation (HA_EXTRA_PREPARE_FOR_RENAME)
will cause an assertion failure when a subsequent query tries to open
an additional temporary table instance and thus attempts to reuse it
from the open table list.
This commit fixes the issue by skipping flush/close operations executed
toward the end of ALTER for temporary tables. It also enables a shortcut
for simple ALTERs (like rename, disable/enable keys) on temporary
tables.
As safety checks, added some assertions at code points that should not
be hit for temporary tables.
* remove a confusing method name - Field::set_default_expression()
* remove handler::register_columns_for_write()
* rename stuff
* add asserts
* remove unlikely unlikely
* remove redundant if() conditions
* fix mark_unsupported_function() to report the most important violation
* don't scan vfield list for default values (vfields don't have defaults)
* move handling for DROP CONSTRAINT IF EXIST where it belongs
* don't protect engines from Alter_inplace_info::ALTER_ADD_CONSTRAINT
* comments
MDEV-10134 Add full support for DEFAULT
- Added support for using tables with MySQL 5.7 virtual fields,
including MySQL 5.7 syntax
- Better error messages also for old cases
- CREATE ... SELECT now also updates timestamp columns
- Blob can now have default values
- Added new system variable "check_constraint_checks", to turn of
CHECK constraint checking if needed.
- Removed some engine independent tests in suite vcol to only test myisam
- Moved some tests from 'include' to 't'. Should some day be done for all tests.
- FRM version increased to 11 if one uses virtual fields or constraints
- Changed to use a bitmap to check if a field has got a value, instead of
setting HAS_EXPLICIT_VALUE bit in field flags
- Expressions can now be up to 65K in total
- Ensure we are not refering to uninitialized fields when handling virtual fields or defaults
- Changed check_vcol_func_processor() to return a bitmap of used types
- Had to change some functions that calculated cached value in fix_fields to do
this in val() or getdate() instead.
- store_now_in_TIME() now takes a THD argument
- fill_record() now updates default values
- Add a lookahead for NOT NULL, to be able to handle DEFAULT 1+1 NOT NULL
- Automatically generate a name for constraints that doesn't have a name
- Added support for ALTER TABLE DROP CONSTRAINT
- Ensure that partition functions register virtual fields used. This fixes
some bugs when using virtual fields in a partitioning function
Since a query can now refer to the same temporary table
multiple times, find_dup_table()/find_table_in_list()
have been updated to also consider this new possibility.
mysqld maintains a list of TABLE objects for all temporary
tables created within a session in THD. Here each table is
represented by a TABLE object.
A query referencing a particular temporary table for more
than once, however, failed with ER_CANT_REOPEN_TABLE error
because a TABLE_SHARE was allocate together with the TABLE,
so temporary tables always had only one TABLE per TABLE_SHARE.
This patch lift this restriction by separating TABLE and
TABLE_SHARE objects and storing TABLE_SHAREs for temporary
tables in a list in THD, and TABLEs in a list within their
respective TABLE_SHAREs.
- unused TABLE_SHARE::deleting and TABLE_LIST::deleting flags were removed
- kill_delayed_threads_for_table() and intern_close_table() are now private
methods of table cache
- removed free_share flag of closefrm(): it was never used for temporary
tables and was rarely useful for regular tables
- To ensure that mallocs are marked for the correct THD, even if it's
allocated in another thread, I added the thread_id to the THD constructor
- Added st_my_thread_var to thr_lock_info_init() to avoid a call to my_thread_var
- Moved things from THD::THD() to THD::init()
- Moved some things to THD::cleanup()
- Added THD::free_connection() and THD::reset_for_reuse()
- Added THD to CONNECT::create_thd()
- Added THD::thread_dbug_id and st_my_thread_var->dbug_id. These are needed
to ensure that we have a constant thread_id used for debugging with a THD,
even if it changes thread_id (=connection_id)
- Set variables.pseudo_thread_id in constructor. Removed not needed sets.
THAT ACTUALLY EXISTS
ANALYSIS:
=========
Stored functions updating a view where the view table has a
trigger defined that updates another table, fails reporting
an error that the table doesn't exist.
If there is a trigger defined on a table, a variable
'trg_event_map' will be set to a non-zero value after the
parsed tree creation. This indicates what triggers we need to
pre-load for the TABLE_LIST when opening an associated table.
During the prelocking phase, the variable 'trg_event_map'
will not be set for the view table. This value will be set
after the processing of triggers defined on the table. During
the processing of sub-statements, 'locked_tables_mode' will be
set to 'LTM_PRELOCKED' which denotes that further locking
of tables/functions cannot be done. This results in the other
table not being locked and thus further processing results in
an error getting reported.
FIX:
====
During the prelocking of view, the value of 'trg_event_map'
of the view is copied to 'trg_event_map' of the next table
in the TABLE_LIST. This results in the locking of tables
associated with the trigger as well.
This bug revealed a serious problem: if the same partition list
was used in two window specifications then the temporary table created
to calculate window functions contained fields for two identical
partitions. This problem was fixed as well.
Window functions need to have their own column in the work (temp) table,
like aggregate functions do.
They don't need val_int() -> val_int_result() conversion though, so they
should be wrapped with Item_direct_ref, not Item_aggregate_ref.
This fix also fixes a connection hang when trying to do INSERT DELAYED to a crashed table.
Added crash_mysqld.inc to allow easy crash+restart of mysqld
filesort and init_read_record() for the same table.
This will simplify code for WINDOW FUNCTIONS (MDEV-6115)
- Filesort_info renamed to SORT_INFO and moved to filesort.h
- filesort now returns SORT_INFO
- init_read_record() now takes a SORT_INFO parameter.
- unique declaration is moved to uniques.h
- subselect caching of buffers is now more explicit than before
- filesort_buffer is now reusable even if rec_length has changed.
- filsort_free_buffers() and free_io_cache() calls are removed
- Remove one malloc() when using get_addon_fields()
Other things:
- Added --debug-assert-on-not-freed-memory option to make it easier to
debug some not-freed-memory issues.
- Item_sum_count::remove() should check if the argument's value is NULL.
- Window Function item must have its Item_window_func::split_sum_func
called,
- and it must call split_sum_func for aggregate's arguments (see the
comment near Item_window_func::split_sum_func for explanation why)
"Re-factor the code for post-join operations".
The patch mainly contains the code ported from mysql-5.6 and
created for two essential architectural changes:
1. WL#5558: Resolve ORDER BY execution method at the optimization stage
2. WL#6071: Inline tmp tables into the nested loops algorithm
The first task was implemented for mysql-5.6 by Ole John Aske.
It allows to make all decisions on ORDER BY operation at the optimization
stage.
The second task implemented for mysql-5.6 by Evgeny Potemkin adds JOIN_TAB
nodes for post-join operations that require temporary tables. It allows
to execute these operations within the nested loops algorithm that used to
be used before this task only for join queries. Besides these task moves
all planning on the execution of these operations from the execution phase
to the optimization phase.
Some other re-factoring changes of mysql-5.6 were pulled in, mainly because
it was easier to pull them in than roll them back. In particular all
changes concerning Ref_ptr_array were incorporated.
The port required some changes in the MariaDB code that concerned the
functionality of EXPLAIN and ANALYZE. This was done mainly by Sergey
Petrunia.
Creating a CONNECT object on client connect and pass this to the working thread which creates the THD.
Split LOCK_thread_count to different mutexes
Added LOCK_thread_start to syncronize threads
Moved most usage of LOCK_thread_count to dedicated functions
Use next_thread_id() instead of thread_id++
Other things:
- Thread id now starts from 1 instead of 2
- Added cast for thread_id as thread id is now of type my_thread_id
- Made THD->host const (To ensure it's not changed)
- Removed some DBUG_PRINT() about entering/exiting mutex as these was already logged by mutex code
- Fixed that aborted_connects and connection_errors_internal are counted in all cases
- Don't take locks for current_linfo when we set it (not needed as it was 0 before)
Don't compare "field == table->next_number_field" because the field
can be special nullable field copy created by the trigger.
Compare field_index values instead.
NOT NULL constraint must be checked *after* the BEFORE triggers.
That is for INSERT and UPDATE statements even NOT NULL fields
must be able to store a NULL temporarily at least while
BEFORE INSERT/UPDATE triggers are running.
* move common code to a new set_bad_null_error() function
* move repeated comparison out of the loop
* remove unused code
* unused method Table_triggers_list::set_table
* redundant condition (if (table) after table was dereferenced)
* add an assert
On shutdown feedback was sending a short report without creating
a THD. At that point current_thd was pointing to the already
destroyed THD from the previous full report.
backport from 10.1:
commit bfe703a
Author: Sergei Golubchik <serg@mariadb.org>
Date: Tue Feb 3 18:19:56 2015 +0100
don't let current_thd to point to a destroyed THD
Problem & Analysis: If DML invokes a trigger or a
stored function that inserts into an AUTO_INCREMENT column,
that DML has to be marked as 'unsafe' statement. If the
tables are locked in the transaction prior to DML statement
(using LOCK TABLES), then the same statement is not marked as
'unsafe' statement. The logic of checking whether unsafeness
is protected with if (!thd->locked_tables_mode). Hence if
we lock the tables prior to DML statement, it is *not* entering
into this if condition. Hence the statement is not marked
as unsafe statement.
Fix: Irrespective of locked_tables_mode value, the unsafeness
check should be done. Now with this patch, the code is moved
out to 'decide_logging_format()' function where all these checks
are happening and also with out 'if(!thd->locked_tables_mode)'.
Along with the specified test case in the bug scenario
(BINLOG_STMT_UNSAFE_AUTOINC_COLUMNS), we also identified that
other cases BINLOG_STMT_UNSAFE_AUTOINC_NOT_FIRST,
BINLOG_STMT_UNSAFE_WRITE_AUTOINC_SELECT, BINLOG_STMT_UNSAFE_INSERT_TWO_KEYS
are also protected with thd->locked_tables_mode which is not right. All
of those checks also moved to 'decide_logging_format()' function.
HA_MYISAMMRG.CC:631
Analysis
========
Any attempt to open a temporary MyISAM merge table consisting
of a view in its list of tables (not the last table in the list)
under LOCK TABLES causes the server to exit.
Current implementation doesn't perform sanity checks during
merge table creation. This allows merge table to be created
with incompatible tables (table with non-myisam engine),
views or even with table doesn't exist in the system.
During view open, check to verify whether requested view
is part of a merge table is missing under LOCK TABLES path
in open_table(). This leads to opening of underlying table
with parent_l having NULL value. Later when attaching child
tables to parent, this hits an ASSERT as all child tables
should have parent_l pointing to merge parent. If the operation
does not happen under LOCK TABLES mode, open_table() checks
for view's parent_l and returns error.
Fix:
======
Check added before opening view Under LOCK TABLES in open_table()
to verify whether it is part of merge table. Error is returned
if the view is part of a merge table.
find_item_in_list() now recognize view fields like a fields even if they rever to an expression.
The problem of schema name do not taken into account for field with it and
derived table fixed.
Duplicating code removed
(MDEV-8617: Post-fix for 10.1)
* Reset THD's PS members before returning when node is
not ready
* Add CF_SKIP_WSREP_CHECK flag to COM_STMT_XXX commands
* Skip TO replication of COM_STMT_PREPAREs for MyISAM
* Updated tests
Problem: Not all permanent Item_direct_view_ref was in permanent list of used items of the view.
Solution: Detect creating permenent view/derived table reference and put them in the permanent list at once.
- Part 3: Adding mem_root to push_back() and push_front()
Other things:
- Added THD as an argument to some partition functions.
- Added memory overflow checking for XML tag's in read_xml()
- Added mem_root to all calls to new Item
- Added private method operator new(size_t size) to Item to ensure that
we always use a mem_root when creating an item.
This saves use once call to current_thd per Item creation
Added mandatory thd parameter to Item (and all derivative classes) constructor.
Added thd parameter to all routines that may create items.
Also removed "current_thd" from Item::Item. This reduced number of
pthread_getspecific() calls from 290 to 177 per OLTP RO transaction.
Alternative fix that doesn't cause view.test crash in --ps:
Remember when Item_ref was fixed right in the constructor
and did not have a full Item_ref::fix_fields() call. Later
in PS/SP, after Item_ref::cleanup, we use this knowledge
to avoid doing full fix_fields() for items that were never
supposed to be fix_field'ed.
Simplify the test case.
- Changed ER(ER_...) to ER_THD(thd, ER_...) when thd was known or if there was many calls to current_thd in the same function.
- Changed ER(ER_..) to ER_THD_OR_DEFAULT(current_thd, ER...) in some places where current_thd is not necessary defined.
- Removing calls to current_thd when we have access to thd
Part of this is optimization (not calling current_thd when not needed),
but part is bug fixing for error condition when current_thd is not defined
(For example on startup and end of mysqld)
Notable renames done as otherwise a lot of functions would have to be changed:
- In JOIN structure renamed:
examined_rows -> join_examined_rows
record_count -> join_record_count
- In Field, renamed new_field() to make_new_field()
Other things:
- Added DBUG_ASSERT(thd == tmp_thd) in Item_singlerow_subselect() just to be safe.
- Removed old 'tab' prefix in JOIN_TAB::save_explain_data() and use members directly
- Added 'thd' as argument to a few functions to avoid calling current_thd.
Fixed several optimizer issues relatied to GROUP BY:
a) Refering to a SELECT column in HAVING sometimes calculated it twice, which caused problems with non determinstic functions
b) Removing duplicate fields and constants from GROUP BY was done too late for "using index for group by" optimization to work
c) EXPLAIN SELECT ... GROUP BY did wrongly show 'Using filesort' in some cases involving "Using index for group-by"
a) was fixed by:
- Changed last argument to Item::split_sum_func2() from bool to int to allow more flags
- Added flag argument to Item::split_sum_func() to allow on to specify if the item was in the SELECT part
- Mark all split_sum_func() calls from SELECT with SPLIT_SUM_SELECT
- Changed split_sum_func2() to do nothing if called with an argument that is not a sum function and doesn't include sum functions, if we are not an argument to SELECT.
This ensures that in a case like
select a*sum(b) as f1 from t1 where a=1 group by c having f1 <= 10;
That 'a' in the SELECT part is stored as a reference in the temporary table togeher with sum(b) while the 'a' in having isn't (not needed as 'a' is already a reference to a column in the result)
b) was fixed by:
- Added an extra remove_const() pass for GROUP BY arguments before make_join_statistics() in case of one table SELECT.
This allowes get_best_group_min_max() to optimize things better.
c) was fixed by:
- Added test for group by optimization in JOIN::exec_inner for
select->quick->get_type() == QUICK_SELECT_I::QS_TYPE_GROUP_MIN_MAX
item.cc:
- Simplifed Item::split_sum_func2()
- Split test to make them faster and easier to read
- Changed last argument to Item::split_sum_func2() from bool to int to allow more flags
- Added flag argument to Item::split_sum_func() to allow on to specify if the item was in the SELECT part
- Changed split_sum_func2() to do nothing if called with an argument that is not a sum function and doesn't include sum functions, if we are not an argument to SELECT.
opt_range.cc:
- Simplified get_best_group_min_max() by calcuating first how many group_by elements.
- Use join->group instead of join->group_list to test if group by, as join->group_list may be NULL if everything was optimized away.
sql_select.cc:
- Added an extra remove_const() pass for GROUP BY arguments before make_join_statistics() in case of one table SELECT.
- Use group instead of group_list to test if group by, as group_list may be NULL if everything was optimized away.
- Moved printing of "Error in remove_const" to remove_const() instead of having it in caller.
- Simplified some if tests by re-ordering code.
- update_depend_map_for_order() and remove_const() fixed to handle the case where make_join_statistics() has not yet been called (join->join_tab is 0 in this case)
SELECT ... WHERE XX IN (SELECT YY)
this was transformed to something like:
SELECT ... WHERE IF_EXISTS(SELECT ... HAVING XX=YY)
The bug was that for normal execution XX was fixed in the original outer SELECT context while in PS it was fixed in the sub query context and this confused the optimizer.
Fixed by ensuring that XX is always fixed in the outer context.
Do not call handler::rebind_psi() and handler::unbind_psi() when performance
schema is compiled out.
Overhead change:
handler::rebind_psi 0.04% -> out of radar
handler::unbind_psi 0.03% -> out of radar
open_table 0.21% -> 0.18%
close_thread_table 0.05% -> 0.05%
sql_alloc() has additional costs compared to direct mem_root allocation:
- function call: it is defined in a separate translation unit and can't be
inlined
- it needs to call pthread_getspecific() to get THD::mem_root
It is called dozens of times implicitely at least by:
- List<>::push_back()
- List<>::push_front()
- new (for Sql_alloc derived classes)
- sql_memdup()
Replaced lots of implicit sql_alloc() calls with direct mem_root allocation,
passing through THD pointer whenever it is needed.
Number of sql_alloc() calls reduced 345 -> 41 per OLTP RO transaction.
pthread_getspecific() overhead dropped 0.76 -> 0.59
sql_alloc() overhed dropped 0.25 -> 0.06
delete_dynamic() was called 9-11x per OLTP RO query + 3x per BEGIN/COMMIT.
3 calls were performed by LEX_MASTER_INFO. Added condition to call those only
for CHANGE MASTER.
1 call was performed by lock_table_names()/Hash_set/my_hash_free(). Hash_set was
supposed to be used for DDL and LOCK TABLES to gather database names, while it
was initialized/freed for DML too. In fact Hash_set didn't do any useful job
here. Hash_set was removed and MDL requests are now added directly to the list.
The rest 5-7 calls are done by optimizer, mostly by Explain_query and friends.
Since dynamic arrays are used in most cases, they can hardly be optimized.
my_hash_free() overhead dropped 0.02 -> out of radar.
delete_dynamic() overhead dropped 0.12 -> 0.04.
AVOID DEADLOCK AFTER RESTORE
Analysis
--------
Accessing the restored NDB table in an active multi-statement
transaction was resulting in deadlock found error.
MySQL Server needs to discover metadata of NDB table from
data nodes after table is restored from backup. Metadata
discovery happens on the first access to restored table.
Current code mandates this statement to be the first one
in the transaction. This is because discover needs exclusive
metadata lock on the table. Lock upgrade at this point can
lead to MDL deadlock and the code was written at the time
when MDL deadlock detector was not present. In case when
discovery attempted in the statement other than the first
one in transaction ER_LOCK_DEADLOCK error is reported
pessimistically.
Fix:
---
Removed the constraint as any potential deadlock will be
handled by deadlock detector. Also changed code in discover
to keep metadata locks of active transaction.
Same issue was present in table auto repair scenario. Same
fix is added in repair path also.
This was a regression from the patch for MDEV-7668.
A test was incorrect, so the slave would not properly handle re-using
temporary tables, which lead to replication failure in this case.
It is possible for Item_field to have a NULL field_name. This is true if
the Item_field is created based on a field in a temporary table that has
no name. It is thus necessary to do a null check before attempting a
strcmp.
Make sure that in parallel replication, we execute wait_for_prior_commit()
before setting table->in_use for a temporary table. Otherwise we can end up
with two parallel replication worker threads competing with each other for
use of a temporary table.
Re-factor the use of find_temporary_table() to be able to handle errors
in the caller (as wait_for_prior_commit() can return error in case of
deadlock kill).
[This commit cherry-picked to be able to merge MDEV-7936, of which it
is a pre-requisite, into both 10.0 and 10.1.]
Parallel replication depends on locking (table locks, row locks, etc.) to
prevent two conflicting transactions from running and committing in parallel.
But temporary tables are designed to be visible only to one thread, and have
no such locking.
In the concrete issue, an intermediate master could commit a CREATE TEMPORARY
TABLE in the same group commit as in INSERT into that table. Thus, a
lower-level master could attempt to run them in parallel and get an error.
More generally, we need protection from parallel replication trying to run
transactions in parallel that access a common temporary table.
This patch simply causes use of a temporary table from parallel replication
to wait for all previous transactions to commit, serialising the replication
at that point.
(A more fine-grained locking could be added later, possibly. However,
using temporary tables in statement-based replication is in any case
normally undesirable; for example a restart of the server will lose
temporary tables and can break replication).
Note that row-based replication is not affected, as it does not do any
temporary tables on the slave-side.
This patch also cleans up the locking around protecting the list of
temporary tables in Relay_log_info. This used to take the
rli->data_lock at the end of every statement, which is very bad for
concurrency. With this patch, the lock is not taken unless temporary
tables (with statement-based binlogging) are in use on the slave.
Parallel replication depends on locking (table locks, row locks, etc.) to
prevent two conflicting transactions from running and committing in parallel.
But temporary tables are designed to be visible only to one thread, and have
no such locking.
In the concrete issue, an intermediate master could commit a CREATE TEMPORARY
TABLE in the same group commit as in INSERT into that table. Thus, a
lower-level master could attempt to run them in parallel and get an error.
More generally, we need protection from parallel replication trying to run
transactions in parallel that access a common temporary table.
This patch simply causes use of a temporary table from parallel replication
to wait for all previous transactions to commit, serialising the replication
at that point.
(A more fine-grained locking could be added later, possibly. However,
using temporary tables in statement-based replication is in any case
normally undesirable; for example a restart of the server will lose
temporary tables and can break replication).
Note that row-based replication is not affected, as it does not do any
temporary tables on the slave-side.
This patch also cleans up the locking around protecting the list of
temporary tables in Relay_log_info. This used to take the
rli->data_lock at the end of every statement, which is very bad for
concurrency. With this patch, the lock is not taken unless temporary
tables (with statement-based binlogging) are in use on the slave.
Do not use merge_for_insert for commands which use SELECT because optimizer can't work with such tables.
Fixes which makes multi-delete working with normally merged views.
* reset current_thd in THD::~THD, otherwise my_malloc_size_cb_func()
might access THD after it was destroyed.
* remove now redundant set_current_thd(0) calls that follow delete thd.
The reason for the failure was a bug in an include file on debian that causes 'struct stat'
to have different sized depending on the environment.
This patch fixes so that we always include my_global.h or my_config.h before we include any other files.
Other things:
- Removed #include <my_global.h> in some include files; Better to always do this at the top level to have as few
"always-include-this-file-first' files as possible.
- Removed usage of some include files that where already included by my_global.h or by other files.
client/mysql_plugin.c:
Use my_global.h first
client/mysqlslap.c:
Remove duplicated include files
extra/comp_err.c:
Remove duplicated include files
include/m_string.h:
Remove duplicated include files
include/maria.h:
Remove duplicated include files
libmysqld/emb_qcache.cc:
Use my_global.h first
plugin/semisync/semisync.h:
Use my_pthread.h first
sql/datadict.cc:
Use my_global.h first
sql/debug_sync.cc:
Use my_global.h first
sql/derror.cc:
Use my_global.h first
sql/des_key_file.cc:
Use my_global.h first
sql/discover.cc:
Use my_global.h first
sql/event_data_objects.cc:
Use my_global.h first
sql/event_db_repository.cc:
Use my_global.h first
sql/event_parse_data.cc:
Use my_global.h first
sql/event_queue.cc:
Use my_global.h first
sql/event_scheduler.cc:
Use my_global.h first
sql/events.cc:
Use my_global.h first
sql/field.cc:
Use my_global.h first
Remove duplicated include files
sql/field_conv.cc:
Use my_global.h first
sql/filesort.cc:
Use my_global.h first
Remove duplicated include files
sql/gstream.cc:
Use my_global.h first
sql/ha_ndbcluster.cc:
Use my_global.h first
sql/ha_ndbcluster_binlog.cc:
Use my_global.h first
sql/ha_ndbcluster_cond.cc:
Use my_global.h first
sql/ha_partition.cc:
Use my_global.h first
sql/handler.cc:
Use my_global.h first
sql/hash_filo.cc:
Use my_global.h first
sql/hostname.cc:
Use my_global.h first
sql/init.cc:
Use my_global.h first
sql/item.cc:
Use my_global.h first
sql/item_buff.cc:
Use my_global.h first
sql/item_cmpfunc.cc:
Use my_global.h first
sql/item_create.cc:
Use my_global.h first
sql/item_geofunc.cc:
Use my_global.h first
sql/item_inetfunc.cc:
Use my_global.h first
sql/item_row.cc:
Use my_global.h first
sql/item_strfunc.cc:
Use my_global.h first
sql/item_subselect.cc:
Use my_global.h first
sql/item_sum.cc:
Use my_global.h first
sql/item_timefunc.cc:
Use my_global.h first
sql/item_xmlfunc.cc:
Use my_global.h first
sql/key.cc:
Use my_global.h first
sql/lock.cc:
Use my_global.h first
sql/log.cc:
Use my_global.h first
sql/log_event.cc:
Use my_global.h first
sql/log_event_old.cc:
Use my_global.h first
sql/mf_iocache.cc:
Use my_global.h first
sql/mysql_install_db.cc:
Remove duplicated include files
sql/mysqld.cc:
Remove duplicated include files
sql/net_serv.cc:
Remove duplicated include files
sql/opt_range.cc:
Use my_global.h first
sql/opt_subselect.cc:
Use my_global.h first
sql/opt_sum.cc:
Use my_global.h first
sql/parse_file.cc:
Use my_global.h first
sql/partition_info.cc:
Use my_global.h first
sql/procedure.cc:
Use my_global.h first
sql/protocol.cc:
Use my_global.h first
sql/records.cc:
Use my_global.h first
sql/records.h:
Don't include my_global.h
Better to do this at the upper level
sql/repl_failsafe.cc:
Use my_global.h first
sql/rpl_filter.cc:
Use my_global.h first
sql/rpl_gtid.cc:
Use my_global.h first
sql/rpl_handler.cc:
Use my_global.h first
sql/rpl_injector.cc:
Use my_global.h first
sql/rpl_record.cc:
Use my_global.h first
sql/rpl_record_old.cc:
Use my_global.h first
sql/rpl_reporting.cc:
Use my_global.h first
sql/rpl_rli.cc:
Use my_global.h first
sql/rpl_tblmap.cc:
Use my_global.h first
sql/rpl_utility.cc:
Use my_global.h first
sql/set_var.cc:
Added comment
sql/slave.cc:
Use my_global.h first
sql/sp.cc:
Use my_global.h first
sql/sp_cache.cc:
Use my_global.h first
sql/sp_head.cc:
Use my_global.h first
sql/sp_pcontext.cc:
Use my_global.h first
sql/sp_rcontext.cc:
Use my_global.h first
sql/spatial.cc:
Use my_global.h first
sql/sql_acl.cc:
Use my_global.h first
sql/sql_admin.cc:
Use my_global.h first
sql/sql_analyse.cc:
Use my_global.h first
sql/sql_audit.cc:
Use my_global.h first
sql/sql_base.cc:
Use my_global.h first
sql/sql_binlog.cc:
Use my_global.h first
sql/sql_bootstrap.cc:
Use my_global.h first
Use my_global.h first
sql/sql_cache.cc:
Use my_global.h first
sql/sql_class.cc:
Use my_global.h first
sql/sql_client.cc:
Use my_global.h first
sql/sql_connect.cc:
Use my_global.h first
sql/sql_crypt.cc:
Use my_global.h first
sql/sql_cursor.cc:
Use my_global.h first
sql/sql_db.cc:
Use my_global.h first
sql/sql_delete.cc:
Use my_global.h first
sql/sql_derived.cc:
Use my_global.h first
sql/sql_do.cc:
Use my_global.h first
sql/sql_error.cc:
Use my_global.h first
sql/sql_explain.cc:
Use my_global.h first
sql/sql_expression_cache.cc:
Use my_global.h first
sql/sql_handler.cc:
Use my_global.h first
sql/sql_help.cc:
Use my_global.h first
sql/sql_insert.cc:
Use my_global.h first
sql/sql_lex.cc:
Use my_global.h first
sql/sql_load.cc:
Use my_global.h first
sql/sql_locale.cc:
Use my_global.h first
sql/sql_manager.cc:
Use my_global.h first
sql/sql_parse.cc:
Use my_global.h first
sql/sql_partition.cc:
Use my_global.h first
sql/sql_plugin.cc:
Added comment
sql/sql_prepare.cc:
Use my_global.h first
sql/sql_priv.h:
Added error if we use this before including my_global.h
This check is here becasue so many files includes sql_priv.h first.
sql/sql_profile.cc:
Use my_global.h first
sql/sql_reload.cc:
Use my_global.h first
sql/sql_rename.cc:
Use my_global.h first
sql/sql_repl.cc:
Use my_global.h first
sql/sql_select.cc:
Use my_global.h first
sql/sql_servers.cc:
Use my_global.h first
sql/sql_show.cc:
Added comment
sql/sql_signal.cc:
Use my_global.h first
sql/sql_statistics.cc:
Use my_global.h first
sql/sql_table.cc:
Use my_global.h first
sql/sql_tablespace.cc:
Use my_global.h first
sql/sql_test.cc:
Use my_global.h first
sql/sql_time.cc:
Use my_global.h first
sql/sql_trigger.cc:
Use my_global.h first
sql/sql_udf.cc:
Use my_global.h first
sql/sql_union.cc:
Use my_global.h first
sql/sql_update.cc:
Use my_global.h first
sql/sql_view.cc:
Use my_global.h first
sql/sys_vars.cc:
Added comment
sql/table.cc:
Use my_global.h first
sql/thr_malloc.cc:
Use my_global.h first
sql/transaction.cc:
Use my_global.h first
sql/uniques.cc:
Use my_global.h first
sql/unireg.cc:
Use my_global.h first
sql/unireg.h:
Removed inclusion of my_global.h
storage/archive/ha_archive.cc:
Added comment
storage/blackhole/ha_blackhole.cc:
Use my_global.h first
storage/csv/ha_tina.cc:
Use my_global.h first
storage/csv/transparent_file.cc:
Use my_global.h first
storage/federated/ha_federated.cc:
Use my_global.h first
storage/federatedx/federatedx_io.cc:
Use my_global.h first
storage/federatedx/federatedx_io_mysql.cc:
Use my_global.h first
storage/federatedx/federatedx_io_null.cc:
Use my_global.h first
storage/federatedx/federatedx_txn.cc:
Use my_global.h first
storage/heap/ha_heap.cc:
Use my_global.h first
storage/innobase/handler/handler0alter.cc:
Use my_global.h first
storage/maria/ha_maria.cc:
Use my_global.h first
storage/maria/unittest/ma_maria_log_cleanup.c:
Remove duplicated include files
storage/maria/unittest/test_file.c:
Added comment
storage/myisam/ha_myisam.cc:
Move sql_plugin.h first as this includes my_global.h
storage/myisammrg/ha_myisammrg.cc:
Use my_global.h first
storage/oqgraph/oqgraph_thunk.cc:
Use my_config.h and my_global.h first
One could not include my_global.h before oqgraph_thunk.h (don't know why)
storage/spider/ha_spider.cc:
Use my_global.h first
storage/spider/hs_client/config.cpp:
Use my_global.h first
storage/spider/hs_client/escape.cpp:
Use my_global.h first
storage/spider/hs_client/fatal.cpp:
Use my_global.h first
storage/spider/hs_client/hstcpcli.cpp:
Use my_global.h first
storage/spider/hs_client/socket.cpp:
Use my_global.h first
storage/spider/hs_client/string_util.cpp:
Use my_global.h first
storage/spider/spd_conn.cc:
Use my_global.h first
storage/spider/spd_copy_tables.cc:
Use my_global.h first
storage/spider/spd_db_conn.cc:
Use my_global.h first
storage/spider/spd_db_handlersocket.cc:
Use my_global.h first
storage/spider/spd_db_mysql.cc:
Use my_global.h first
storage/spider/spd_db_oracle.cc:
Use my_global.h first
storage/spider/spd_direct_sql.cc:
Use my_global.h first
storage/spider/spd_i_s.cc:
Use my_global.h first
storage/spider/spd_malloc.cc:
Use my_global.h first
storage/spider/spd_param.cc:
Use my_global.h first
storage/spider/spd_ping_table.cc:
Use my_global.h first
storage/spider/spd_sys_table.cc:
Use my_global.h first
storage/spider/spd_table.cc:
Use my_global.h first
storage/spider/spd_trx.cc:
Use my_global.h first
storage/xtradb/handler/handler0alter.cc:
Use my_global.h first
storage/xtradb/handler/i_s.cc:
Use my_global.h first
We should assume that the store engine will report the first duplicate key for this case.
Old code of suppression of unsafe logging error with LIMIT didn't work, because of wrong usage of my_interval_timer().
Suppress unsafe logging errors to the error log if we get too many unsafe logging errors in a short time.
This is to not overflow the error log with meaningless errors.
- Each error code is suppressed and counted separately.
- We do a 5 minute suppression of new errors if we get more than 10 errors in that time.
Only print unsafe logging errors if log_warnings > 1.
mysql-test/suite/binlog/r/binlog_stm_unsafe_warning.result:
Update test results as INSERT ... ON DUPLICATE KEY UPDATE doesn't get logged anymore
mysql-test/suite/binlog/r/binlog_unsafe.result:
Update test results as INSERT ... ON DUPLICATE KEY UPDATE doesn't get logged anymore
mysql-test/suite/engines/README:
Fixed typos
mysql-test/suite/rpl/r/rpl_known_bugs_detection.result:
Update test results as INSERT ... ON DUPLICATE KEY UPDATE doesn't get logged anymore
sql/sql_base.cc:
Don't log warning if there are two unique keys used with INSERT .. ON DUPLICATE KEY UPDATE.
We should assume that the store engine will report the first duplicate key for this case.
sql/sql_class.cc:
Suppress error in binary log if we get too many unsafe logging errors in a short time.
Only print unsafe logging errors if log_warnings > 1
MDEV-6560 Assertion `! is_set() ' failed in Diagnostics_area::set_ok_status on killing CREATE OR REPLACE
MDEV-6525 Assertion `table->pos_in_locked _tables == __null || table->pos_in_locked_tables->table = table' failed in mark_used_tables_as_free_for_reuse, locking problems and binlogging problems on CREATE OR REPLACE under lock.
mysql-test/r/create_or_replace.result:
Added test for MDEV-6560
mysql-test/t/create_or_replace.test:
Added test for MDEV-6560
mysql-test/valgrind.supp:
Added suppression for OpenSuse 12.3
sql/sql_base.cc:
More DBUG
sql/sql_class.cc:
Changed that thd_sqlcom_can_generate_row_events() does not report that CREATE OR REPLACE is generating row events.
This is safe as this function is only used by InnoDB/XtraDB to check if a query is generating row events as part of another transaction. As CREATE is always run as it's own transaction, this isn't a problem.
This fixed MDEV-6525.
sql/sql_table.cc:
Remember if reopen_tables() generates an error (which can only happen in case of KILL).
This fixed MDEV-6560
Merged lp:maria/maria-10.0-galera up to revision 3879.
Added a new functions to handler API to forcefully abort_transaction,
producing fake_trx_id, get_checkpoint and set_checkpoint for XA. These
were added for future possiblity to add more storage engines that
could use galera replication.
* Don't write frm for tmp tables
* pass frm image down to open_table_uncached, when possible
* don't use truncate-by-recreate for temp tables - cannot recreate
without frm, and delete_all_rows is faster anyway
replication causing replication to fail.
In parallel replication, we run transactions from the master in parallel, but
force them to commit in the same order they did on the master. If we force T1
to commit before T2, but T2 holds eg. a row lock that is needed by T1, we get
a deadlock when T2 waits until T1 has committed.
Usually, we do not run T1 and T2 in parallel if there is a chance that they
can have conflicting locks like this, but there are certain edge cases where
it can occasionally happen (eg. MDEV-5914, MDEV-5941, MDEV-6020). The bug was
that this would cause replication to hang, eventually getting a lock timeout
and causing the slave to stop with error.
With this patch, InnoDB will report back to the upper layer whenever a
transactions T1 is about to do a lock wait on T2. If T1 and T2 are parallel
replication transactions, and T2 needs to commit later than T1, we can thus
detect the deadlock; we then kill T2, setting a flag that causes it to catch
the kill and convert it to a deadlock error; this error will then cause T2 to
roll back and release its locks (so that T1 can commit), and later T2 will be
re-tried and eventually also committed.
The kill happens asynchroneously in a slave background thread; this is
necessary, as the reporting from InnoDB about lock waits happen deep inside
the locking code, at a point where it is not possible to directly call
THD::awake() due to mutexes held.
Deadlock is assumed to be (very) rarely occuring, so this patch tries to
minimise the performance impact on the normal case where no deadlocks occur,
rather than optimise the handling of the occasional deadlock.
Also fix transaction retry due to deadlock when it happens after a transaction
already signalled to later transactions that it started to commit. In this
case we need to undo this signalling (and later redo it when we commit again
during retry), so following transactions will not start too early.
Also add a missing thd->send_kill_message() that got triggered during testing
(this corrects an incorrect fix for MySQL Bug#58933).
It is triple bug with one test suite:
1. Incorrect outer table detection
2. Incorrect leaf table processing for multi-update (should be full like for usual updates and inserts)
3. ON condition fix_fields() fould be called for all tables of the query.
Revert the old patch revid:monty@askmonty.org-20100325133339-7mkel6valai0b4lb
This patch caused the InnoDB part of the transaction to not be marked
read-write in some cases, which messes up XA commit (and likely other
stuff as well).
mysql-test/r/create_or_replace.result:
More tests for create or replace
mysql-test/t/create_or_replace.test:
More tests for create or replace
sql/log.cc:
Don't use binlog_hton if binlog is not enabmed
sql/sql_base.cc:
We have to call restart_trans_for_tables also if tables where not locked with LOCK TABLES.
If not, we will get a crash in TokuDB
sql/sql_insert.cc:
Don't call binlog_reset_cache() if we don't have binary log open
sql/sql_table.cc:
Don't log to binary log if not open
Better test if we where using create or replace ... select
storage/tokudb/mysql-test/tokudb_mariadb/r/create_or_replace.result:
More tests for create or replace
storage/tokudb/mysql-test/tokudb_mariadb/t/create_or_replace.test:
More tests for create or replace
