innobase_start_or_create_for_mysql(): Only start the data dictionary
and transaction subsystems in normal server startup and during
mariabackup --export.
recv_log_recover_10_3(): Determine if a log from MariaDB 10.3 is clean.
recv_find_max_checkpoint(): Allow startup with a clean 10.3 redo log.
srv_prepare_to_delete_redo_log_files(): When starting up with a 10.3 log,
display a "Downgrading redo log" message instead of "Upgrading".
Also, MDEV-14317 When ALTER TABLE is aborted, do not write garbage pages to data files
As pointed out by Shaohua Wang, the merge of MDEV-13328 from
MariaDB 10.1 (based on MySQL 5.6) to 10.2 (based on 5.7)
was performed incorrectly.
Let us always pass a non-NULL FlushObserver* when writing
to data files is desired.
FlushObserver::is_partial_flush(): Check if this is a bulk-load
(partial flush of the tablespace).
FlushObserver::is_interrupted(): Check for interrupt status.
buf_LRU_flush_or_remove_pages(): Instead of trx_t*, take
FlushObserver* as a parameter.
buf_flush_or_remove_pages(): Remove the parameters flush, trx.
If observer!=NULL, write out the data pages. Use the new predicate
observer->is_partial() to distinguish a partial tablespace flush
(after bulk-loading) from a full tablespace flush (export).
Return a bool (whether all pages were removed from the flush_list).
buf_flush_dirty_pages(): Remove the parameter trx.
Mariabackup 10.2.7 would delete the redo log files after a successful
--prepare operation. If the user is manually copying the prepared files
instead of using the --copy-back option, it could happen that some old
redo log file would be preserved in the restored location. These old
redo log files could cause corruption of the restored data files when
the server is started up.
We prevent this scenario by creating a "poisoned" redo log file
ib_logfile0 at the end of the --prepare step. The poisoning consists
of simply truncating the file to an empty file. InnoDB will refuse
to start up on an empty redo log file.
copy_back(): Delete all redo log files in the target if the source
file ib_logfile0 is empty. (Previously we did this if the source
file is missing.)
SRV_OPERATION_RESTORE_EXPORT: A new variant of SRV_OPERATION_RESTORE
when the --export option is specified. In this mode, we will keep
deleting all redo log files, instead of truncating the first one.
delete_log_files(): Add a parameter for the first file to delete,
to be passed as 0 or 1.
innobase_start_or_create_for_mysql(): In mariabackup --prepare,
tolerate an empty ib_logfile0 file. Otherwise, require the first
redo log file to be longer than 4 blocks (2048 bytes). Unless
--export was specified, truncate the first log file at the
end of --prepare.
The last parameter to this function is now,"bool is_sparse", like in 10.1
rather than the unused/useless "bool is_readonly", merged from MySQL 5.7
Like in 10.1, this function now supports sparse files, and efficient
platform specific mechanisms for file extension
os_file_set_size() is now consistenly used in all places where
innodb files are extended.
The only universal index in InnoDB was the change buffer.
It suffices to keep the DICT_IBUF flag (which, like DICT_UNIVERSAL,
is not written to any persistent data structure).
This fixes several InnoDB bugs related to innodb_encrypt_log and
two Mariabackup --backup bugs.
log_crypt(): Properly derive the initialization vector from the
start LSN of each block. Add a debug assertion.
log_crypt_init(): Note that the function should only be used when
creating redo log files and that the information is persisted in
the checkpoint pages.
xtrabackup_copy_log(): Validate data_len.
xtrabackup_backup_func(): Always use the chosen checkpoint buffer.
log_group_write_buf(), log_write_up_to(): Only log_crypt() the redo
log payload, not the padding bytes.
innobase_start_or_create_for_mysql(): Do not invoke log_crypt_init()
or initiate a redo log checkpoint.
recv_find_max_checkpoint(): Return the contents of LOG_CHECKPOINT_NO
to xtrabackup_backup_func() in log_sys->next_checkpoint_no.
There is a race condition in InnoDB startup. A number of
fil_crypt_thread are created by fil_crypt_threads_init(). These threads
may call btr_scrub_complete_space() before btr_scrub_init() was called.
Those too early calls would be accessing an uninitialized scrub_stat_mutex.
innobase_start_or_create_for_mysql(): Invoke btr_scrub_init() before
fil_crypt_threads_init().
fil_crypt_complete_rotate_space(): Only invoke btr_scrub_complete_space()
if scrubbing is enabled. There is no need to update the statistics if
it is not enabled.
For running the Galera tests, the variable my_disable_leak_check
was set to true in order to avoid assertions due to memory leaks
at shutdown.
Some adjustments due to MDEV-13625 (merge InnoDB tests from MySQL 5.6)
were performed. The most notable behaviour changes from 10.0 and 10.1
are the following:
* innodb.innodb-table-online: adjustments for the DROP COLUMN
behaviour change (MDEV-11114, MDEV-13613)
* innodb.innodb-index-online-fk: the removal of a (1,NULL) record
from the result; originally removed in MySQL 5.7 in the
Oracle Bug #16244691 fix
377774689b
* innodb.create-index-debug: disabled due to MDEV-13680
(the MySQL Bug #77497 fix was not merged from 5.6 to 5.7.10)
* innodb.innodb-alter-autoinc: MariaDB 10.2 behaves like MySQL 5.6/5.7,
while MariaDB 10.0 and 10.1 assign different values when
auto_increment_increment or auto_increment_offset are used.
Also MySQL 5.6/5.7 exhibit different behaviour between
LGORITHM=INPLACE and ALGORITHM=COPY, so something needs to be tested
and fixed in both MariaDB 10.0 and 10.2.
* innodb.innodb-wl5980-alter: disabled because it would trigger an
InnoDB assertion failure (MDEV-13668 may need additional effort in 10.2)
Problem was incorrect definition of wsrep_recovery,
trx_sys_update_wsrep_checkpoint and
trx_sys_read_wsrep_checkpoint functions causing
innodb_plugin not to load as there was undefined symbols.
Fixes also MDEV-13488: InnoDB writes CRYPT_INFO even though
encryption is not enabled.
Problem was that we created encryption metadata (crypt_data) for
system tablespace even when no encryption was enabled and too early.
System tablespace can be encrypted only using key rotation.
Test innodb-key-rotation-disable, innodb_encryption, innodb_lotoftables
require adjustment because INFORMATION_SCHEMA INNODB_TABLESPACES_ENCRYPTION
contain row only if tablespace really has encryption metadata.
fil_crypt_set_thread_cnt: Send message to background encryption threads
if they exits when they are ready. This is required to find tablespaces
requiring key rotation if no other changes happen.
fil_crypt_find_space_to_rotate: Decrease the amount of time waiting
when nothing happens to better enable key rotation on startup.
fsp_header_init: Write encryption metadata to page 0 only if tablespace is
encrypted or encryption is disabled by table option.
i_s_dict_fill_tablespaces_encryption : Skip tablespaces that do not
contain encryption metadata. This is required to avoid too early
wait condition trigger in encrypted -> unencrypted state transfer.
open_or_create_data_files: Do not create encryption metadata
by default to system tablespace.
Problem is that page 0 and its possible enrryption information
is not read for undo tablespaces.
fil_crypt_get_latest_key_version(): Do not send event to
encryption threads if event does not yet exists. Seen
on regression testing.
fil_read_first_page: Add new parameter does page belong to
undo tablespace and if it does, we do not read FSP_HEADER.
srv_undo_tablespace_open : Read first page of the tablespace
to get crypt_data if it exists and pass it to fil_space_create.
Tested using innodb_encryption with combinations with
innodb-undo-tablespaces.
The parameter --innodb-sync-debug, which is disabled by default,
aims to find potential deadlocks in InnoDB.
When the parameter is enabled, lots of tests failed. Most of these
failures were due to bogus diagnostics. But, as part of this fix,
we are also fixing a bug in error handling code and removing dead
code, and fixing cases where an uninitialized mutex was being
locked and unlocked.
dict_create_foreign_constraints_low(): Remove an extraneous
mutex_exit() call that could cause corruption in an error handling
path. Also, do not unnecessarily acquire dict_foreign_err_mutex.
Its only purpose is to control concurrent access to
dict_foreign_err_file.
row_ins_foreign_trx_print(): Replace a redundant condition with a
debug assertion.
srv_dict_tmpfile, srv_dict_tmpfile_mutex: Remove. The
temporary file is never being written to or read from.
log_free_check(): Allow SYNC_FTS_CACHE (fts_cache_t::lock)
to be held.
ha_innobase::inplace_alter_table(), row_merge_insert_index_tuples():
Assert that no unexpected latches are being held.
sync_latch_meta_init(): Properly initialize dict_operation_lock_key
at SYNC_DICT_OPERATION. dict_sys->mutex is SYNC_DICT, and
the now-removed SRV_DICT_TMPFILE was wrongly registered at
SYNC_DICT_OPERATION.
buf_block_init(): Correctly register buf_block_t::debug_latch.
It was previously misleadingly reported as LATCH_ID_DICT_FOREIGN_ERR.
latch_level_t: Correct the relative latching order of
SYNC_IBUF_PESS_INSERT_MUTEX,SYNC_INDEX_TREE and
SYNC_FILE_FORMAT_TAG,SYNC_DICT_OPERATION to avoid bogus failures.
row_drop_table_for_mysql(): Avoid accessing btr_defragment_mutex
if the defragmentation thread has not been started. This is the
case during fts_drop_orphaned_tables() in recv_recovery_rollback_active().
fil_space_destroy_crypt_data(): Avoid acquiring fil_crypt_threads_mutex
when it is uninitialized. We may have created crypt_data before the
mutex was created, and the mutex creation would be skipped if
InnoDB startup failed or --innodb-read-only was specified.
The fix broke mariabackup --prepare --incremental.
The restore of an incremental backup starts up (parts of) InnoDB twice.
First, all data files are discovered for applying .delta files. Then,
after the .delta files have been applied, InnoDB will be restarted
more completely, so that the redo log records will be applied via the
buffer pool.
During the first startup, the buffer pool is not initialized, and thus
trx_rseg_get_n_undo_tablespaces() must not be invoked. The apply of
the .delta files will currently assume that the --innodb-undo-tablespaces
option correctly specifies the number of undo tablespace files, just
like --backup does.
The second InnoDB startup of --prepare for applying the redo log will
properly invoke trx_rseg_get_n_undo_tablespaces().
enum srv_operation_mode: Add SRV_OPERATION_RESTORE_DELTA for
distinguishing the apply of .delta files from SRV_OPERATION_RESTORE.
srv_undo_tablespaces_init(): In mariabackup --prepare --incremental,
in the initial SRV_OPERATION_RESTORE_DELTA phase, do not invoke
trx_rseg_get_n_undo_tablespaces() because the buffer pool or the
redo logs are not available. Instead, blindly rely on the parameter
--innodb-undo-tablespaces.
buf_flush_page_cleaner_coordinator: In the first loop, use an
appropriate termination condition, waiting for !recv_writer_thread_active.
logs_empty_and_mark_files_at_shutdown(): Signal recv_sys->flush_start
in case the recv_writer_thread was never started, or
buf_flush_page_cleaner_coordinator failed to notice its termination.
innobase_start_or_create_for_mysql(): Remove a redundant, unreachable
condition, and properly release resources when aborting startup due to
recv_sys->found_corrupt_log.
This is a regression caused by
commit bb60a832ed
srv_shutdown_all_bg_threads(): If os_thread_count indicates that
no threads are running, do not bother checking thread status.
This avoids a crash when InnoDB startup is aborted before
os_aio_init() has been invoked. (os_aio_all_slots_free() would
dereference AIO::s_reads even though it is NULL.)
InnoDB I/O and buffer pool interfaces and the redo log format
have been changed between MariaDB 10.1 and 10.2, and the backup
code has to be adjusted accordingly.
The code has been simplified, and many memory leaks have been fixed.
Instead of the file name xtrabackup_logfile, the file name ib_logfile0
is being used for the copy of the redo log. Unnecessary InnoDB startup and
shutdown and some unnecessary threads have been removed.
Some help was provided by Vladislav Vaintroub.
Parameters have been cleaned up and aligned with those of MariaDB 10.2.
The --dbug option has been added, so that in debug builds,
--dbug=d,ib_log can be specified to enable diagnostic messages
for processing redo log entries.
By default, innodb_doublewrite=OFF, so that --prepare works faster.
If more crash-safety for --prepare is needed, double buffering
can be enabled.
The parameter innodb_log_checksums=OFF can be used to ignore redo log
checksums in --backup.
Some messages have been cleaned up.
Unless --export is specified, Mariabackup will not deal with undo log.
The InnoDB mini-transaction redo log is not only about user-level
transactions; it is actually about mini-transactions. To avoid confusion,
call it the redo log, not transaction log.
We disable any undo log processing in --prepare.
Because MariaDB 10.2 supports indexed virtual columns, the
undo log processing would need to be able to evaluate virtual column
expressions. To reduce the amount of code dependencies, we will not
process any undo log in prepare.
This means that the --export option must be disabled for now.
This also means that the following options are redundant
and have been removed:
xtrabackup --apply-log-only
innobackupex --redo-only
In addition to disabling any undo log processing, we will disable any
further changes to data pages during --prepare, including the change
buffer merge. This means that restoring incremental backups should
reliably work even when change buffering is being used on the server.
Because of this, preparing a backup will not generate any further
redo log, and the redo log file can be safely deleted. (If the
--export option is enabled in the future, it must generate redo log
when processing undo logs and buffered changes.)
In --prepare, we cannot easily know if a partial backup was used,
especially when restoring a series of incremental backups. So, we
simply warn about any missing files, and ignore the redo log for them.
FIXME: Enable the --export option.
FIXME: Improve the handling of the MLOG_INDEX_LOAD record, and write
a test that initiates a backup while an ALGORITHM=INPLACE operation
is creating indexes or rebuilding a table. An error should be detected
when preparing the backup.
FIXME: In --incremental --prepare, xtrabackup_apply_delta() should
ensure that if FSP_SIZE is modified, the file size will be adjusted
accordingly.
In Mariabackup, we would want the backed-up redo log file size to be
a multiple of 512 bytes, or OS_FILE_LOG_BLOCK_SIZE. However, at startup,
InnoDB would be picky, requiring the file size to be a multiple of
innodb_page_size.
Furthermore, InnoDB would require the parameter to be a multiple of
one megabyte, while the minimum granularity is 512 bytes. Because
the data-file-oriented fil_io() API is being used for writing the
InnoDB redo log, writes will for now require innodb_log_file_size to
be a multiple of the maximum innodb_page_size (65536 bytes).
To complicate matters, InnoDB startup divided srv_log_file_size by
UNIV_PAGE_SIZE, so that initially, the unit was bytes, and later it
was innodb_page_size. We will simplify this and keep srv_log_file_size
in bytes at all times.
innobase_log_file_size: Remove. Remove some obsolete checks against
overflow on 32-bit systems. srv_log_file_size is always 64 bits, and
the maximum size 512GiB in multiples of innodb_page_size always fits
in ulint (which is 32 or 64 bits). 512GiB would be 8,388,608*64KiB or
134,217,728*4KiB.
log_init(): Remove the parameter file_size that was always passed as
srv_log_file_size.
log_set_capacity(): Add a parameter for passing the requested file size.
srv_log_file_size_requested: Declare static in srv0start.cc.
create_log_file(), create_log_files(),
innobase_start_or_create_for_mysql(): Invoke fil_node_create()
with srv_log_file_size expressed in multiples of innodb_page_size.
innobase_start_or_create_for_mysql(): Require the redo log file sizes
to be multiples of 512 bytes.
recv_sys_init(): Remove the parameter.
recv_sys_create(): Merge to recv_sys_init().
recv_sys_mem_free(): Merge to recv_sys_close().
log_mem_free(): Merge to log_shutdown().
srv_log_files_created: A debug flag to ensure that InnoDB redo log
files can only be created once in the server lifetime, and that
after log files have been created, no crash recovery will take place.
recv_scan_log_recs(): Detect the special case where the log consists
of a sole MLOG_CHECKPOINT record, such as immediately after creating
the redo logs.
recv_recovery_from_checkpoint_start(): Skip the recovery message
if the redo log is logically empty.
A merge error caused InnoDB bootstrap to fail when
innodb_undo_tablespaces was set to more than 2.
This was because of a bug that was introduced to
srv_undo_tablespaces_init() by the merge.
Furthermore, some adjustments for Oracle Bug#25551311 aka
Bug#23517560 changes were forgotten. We must minimize direct
references to srv_undo_tablespaces_open and use predicates
instead.
srv_undo_tablespaces_init(): Increment srv_undo_tablespaces_open
once, not twice, per loop iteration.
is_system_or_undo_tablespace(): Remove (unused function).
is_predefined_tablespace(): Invoke srv_is_undo_tablespace().
buf_flush_page_cleaner_coordinator(): Signal the thread creator
that the error log output regarding setpriority() has been issued.
innobase_start_or_create_for_mysql(): Wait for
buf_flush_page_cleaner_coordinator() to completely start up.
This prevents sporadic failures of tests that search the server
error log for InnoDB redo log recovery messages.
While the primary purpose of innodb_force_recovery is to allow
data to be rescued from an InnoDB instance that would crash due
to some data corruption, the settings 1, 2, or 3 are relatively
safe to use and there is no need to prevent write transactions
in these modes.
The setting innodb_force_recovery=4 and above can cause database
corruption. For those modes, we already set the flag
high_level_read_only to disable modifications, except DROP TABLE.
MODIFICATIONS_NOT_ALLOWED_MSG_FORCE_RECOVERY: Remove. There is no
need to spam the error log for each refused DML operation. It suffices
to return an error to the client. There will be messages at startup
if innodb_read_only or innodb_force_recovery are preventing writes.
The original intention of the setting innodb_force_recovery=3 was to
disable background activity that could create trouble, most notably,
the rollback of incomplete transactions, and the purge of transaction
history.
MySQL 5.6 introduced more background threads, it is creating
dict_stats_thread and fts_optimize_thread even though these threads
are at least as non-essential as the rollback and purge. These
threads are in fact worse, because they can create new transactions
on their own.
innobase_start_or_create_for_mysql(): Do not create any internal
undo log sources unless innodb_force_recovery<3.
srv_start_state_t: Document the flags. Replace SRV_START_STATE_STAT
with SRV_START_STATE_REDO. The srv_bg_undo_sources replaces the
original use of SRV_START_STATE_STAT.
dict_stats_thread_started, buf_dump_thread_started,
buf_flush_page_cleaner_thread_started: Remove (unused).
srv_shutdown_all_bg_threads(): Always wait for the I/O threads
to exit, also in read-only mode.
os_thread_free(): Remove.
When a slow shutdown is performed soon after spawning some work for
background threads that can create or commit transactions, it is possible
that new transactions are started or committed after the purge has finished.
This is violating the specification of innodb_fast_shutdown=0, namely that
the purge must be completed. (None of the history of the recent transactions
would be purged.)
Also, it is possible that the purge threads would exit in slow shutdown
while there exist active transactions, such as recovered incomplete
transactions that are being rolled back. Thus, the slow shutdown could
fail to purge some undo log that becomes purgeable after the transaction
commit or rollback.
srv_undo_sources: A flag that indicates if undo log can be generated
or the persistent, whether by background threads or by user SQL.
Even when this flag is clear, active transactions that already exist
in the system may be committed or rolled back.
innodb_shutdown(): Renamed from innobase_shutdown_for_mysql().
Do not return an error code; the operation never fails.
Clear the srv_undo_sources flag, and also ensure that the background
DROP TABLE queue is empty.
srv_purge_should_exit(): Do not allow the purge to exit if
srv_undo_sources are active or the background DROP TABLE queue is not
empty, or in slow shutdown, if any active transactions exist
(and are being rolled back).
srv_purge_coordinator_thread(): Remove some previous workarounds
for this bug.
innobase_start_or_create_for_mysql(): Set buf_page_cleaner_is_active
and srv_dict_stats_thread_active directly. Set srv_undo_sources before
starting the purge subsystem, to prevent immediate shutdown of the purge.
Create dict_stats_thread and fts_optimize_thread immediately
after setting srv_undo_sources, so that shutdown can use this flag to
determine if these subsystems were started.
dict_stats_shutdown(): Shut down dict_stats_thread. Backported from 10.2.
srv_shutdown_table_bg_threads(): Remove (unused).
The doublewrite buffer pages must fit in the first InnoDB system
tablespace data file. The checks that were added in the initial patch
(commit 112b21da37)
were at too high level and did not cover all cases.
innodb.log_data_file_size: Test all innodb_page_size combinations.
fsp_header_init(): Never return an error. Move the change buffer creation
to the only caller that needs to do it.
btr_create(): Clean up the logic. Remove the error log messages.
buf_dblwr_create(): Try to return an error on non-fatal failure.
Check that the first data file is big enough for creating the
doublewrite buffers.
buf_dblwr_process(): Check if the doublewrite buffer is available.
Display the message only if it is available.
recv_recovery_from_checkpoint_start_func(): Remove a redundant message
about FIL_PAGE_FILE_FLUSH_LSN mismatch when crash recovery has already
been initiated.
fil_report_invalid_page_access(): Simplify the message.
fseg_create_general(): Do not emit messages to the error log.
innobase_init(): Revert the changes.
trx_rseg_create(): Refactor (no functional change).
commit 1af8bf39ca added unnecessary
calls to fil_write_flushed_lsn() during redo log resizing at
InnoDB server startup.
Because fil_write_flushed_lsn() is neither redo-logged nor doublewrite
buffered, the call is risky and should be avoided, because if the
server killed during the write call, the whole InnoDB instance can
become inaccessible (corrupted page 0 in the system tablespace).
In the best case, this call might prevent a diagnostic message from
being emitted to the error log on the next startup.
InnoDB never supported more than one copy of a redo log.
There were provisions to do that. For Mariabackup, let us clean up
this code.
log_sys_init(): Renamed from log_init().
log_set_capacity(): Renamed from log_calc_max_ages().
log_init(): Renamed from log_group_init(). Remove the parameters
id, space_id. Let the caller invoke log_set_capacity() when needed.
log_group_t: Remove id, space_id, log_groups.
log_t: Replace log_groups with a single log.
recv_find_max_checkpoint(): Declare globally. Remove the first parameter.
xtrabackup_choose_lsn_offset(): Remove (dead code).
Problem was that all doublewrite buffer pages must fit to first
system datafile.
Ported commit 27a34df7882b1f8ed283f22bf83e8bfc523cbfde
Author: Shaohua Wang <shaohua.wang@oracle.com>
Date: Wed Aug 12 15:55:19 2015 +0800
BUG#21551464 - SEGFAULT WHILE INITIALIZING DATABASE WHEN
INNODB_DATA_FILE SIZE IS SMALL
To 10.1 (with extended error printout).
btr_create(): If ibuf header page allocation fails report error and
return FIL_NULL. Similarly if root page allocation fails return a error.
dict_build_table_def_step: If fsp_header_init fails return
error code.
fsp_header_init: returns true if header initialization succeeds
and false if not.
fseg_create_general: report error if segment or page allocation fails.
innobase_init: If first datafile is smaller than 3M and could not
contain all doublewrite buffer pages report error and fail to
initialize InnoDB plugin.
row_truncate_table_for_mysql: report error if fsp header init
fails.
srv_init_abort: New function to report database initialization errors.
srv_undo_tablespaces_init, innobase_start_or_create_for_mysql: If
database initialization fails report error and abort.
trx_rseg_create: If segment header creation fails return.
Problem was that FIL_PAGE_FLUSH_LSN_OR_KEY_VERSION field that for
encrypted pages even in system datafiles should contain key_version
except very first page (0:0) is after encryption overwritten with
flush lsn.
Ported WL#7990 Repurpose FIL_PAGE_FLUSH_LSN to 10.1
The field FIL_PAGE_FLUSH_LSN_OR_KEY_VERSION is consulted during
InnoDB startup.
At startup, InnoDB reads the FIL_PAGE_FLUSH_LSN_OR_KEY_VERSION
from the first page of each file in the InnoDB system tablespace.
If there are multiple files, the minimum and maximum LSN can differ.
These numbers are passed to InnoDB startup.
Having the number in other files than the first file of the InnoDB
system tablespace is not providing much additional value. It is
conflicting with other use of the field, such as on InnoDB R-tree
index pages and encryption key_version.
This worklog will stop writing FIL_PAGE_FLUSH_LSN_OR_KEY_VERSION to
other files than the first file of the InnoDB system tablespace
(page number 0:0) when system tablespace is encrypted. If tablespace
is not encrypted we continue writing FIL_PAGE_FLUSH_LSN_OR_KEY_VERSION
to all first pages of system tablespace to avoid unnecessary
warnings on downgrade.
open_or_create_data_files(): pass only one flushed_lsn parameter
xb_load_tablespaces(): pass only one flushed_lsn parameter.
buf_page_create(): Improve comment about where
FIL_PAGE_FIL_FLUSH_LSN_OR_KEY_VERSION is set.
fil_write_flushed_lsn(): A new function, merged from
fil_write_lsn_and_arch_no_to_file() and
fil_write_flushed_lsn_to_data_files().
Only write to the first page of the system tablespace (page 0:0)
if tablespace is encrypted, or write all first pages of system
tablespace and invoke fil_flush_file_spaces(FIL_TYPE_TABLESPACE)
afterwards.
fil_read_first_page(): read flush_lsn and crypt_data only from
first datafile.
fil_open_single_table_tablespace(): Remove output of LSN, because it
was only valid for the system tablespace and the undo tablespaces, not
user tablespaces.
fil_validate_single_table_tablespace(): Remove output of LSN.
checkpoint_now_set(): Use fil_write_flushed_lsn and output
a error if operation fails.
Remove lsn variable from fsp_open_info.
recv_recovery_from_checkpoint_start(): Remove unnecessary second
flush_lsn parameter.
log_empty_and_mark_files_at_shutdown(): Use fil_writte_flushed_lsn
and output error if it fails.
open_or_create_data_files(): Pass only one flushed_lsn variable.
btr_defragment_thread(): Create the thread in the same place as other
threads. Do not invoke btr_defragment_shutdown(), because
row_drop_tables_for_mysql_in_background() in the master thread can still
keep invoking btr_defragment_remove_table().
logs_empty_and_mark_files_at_shutdown(): Wait for btr_defragment_thread()
to exit.
innobase_start_or_create_for_mysql(), innobase_shutdown_for_mysql():
Skip encryption and scrubbing in innodb_read_only_mode.
srv_export_innodb_status(): Do not export encryption or scrubbing
statistics in innodb_read_only mode, because the threads will not
be running.
