Revised the test to include a test of completion_type = 1 as well as making the test more readable / worthwhile
Removed the master.opt file as it was redundant / unnecessary.
mysql-test/suite/sys_vars/t/completion_type_func-master.opt:
Removed as redundant. Test uses include/have_innodb.inc.
slave.
In mixed mode, if we create a temporary table and do some update which switch to ROW format,
the format will keep in ROW format until the session ends or the table is dropped explicitly.
When the session ends, the temp table is dropped automaticly at cleanup time.
but it checks only current binlog format and so skip insertion of DROP TABLE instructions into binlog.
So the temp table can't be dropped correctly at slave.
Our solution is that when closing temp tables at cleanup time we check both binlog format and binlog mode,
and we could write DROP TABLE instructions into binlog if current binlog format is ROW but in MIX mode.
mysql-test/suite/rpl/r/rpl_temp_table_mix_row.result:
Test result file.
mysql-test/suite/rpl/t/rpl_temp_table_mix_row.test:
Test file.
sql/sql_base.cc:
Didn't do binloging when both current format and default format are ROW.
If secure-file-priv was set on slave, it became unable to execute
LOAD DATA INFILE statements sent from master using mixed or
statement-based replication.
This patch fixes the issue by ignoring this security restriction
and checking if the files are created and read by the slave in the
--slave-load-tmpdir while executing the SQL Thread.
mysql-test/suite/funcs_1/r/memory_func_view.result:
Take additional precision into account.
mysql-test/suite/funcs_1/r/memory_views.result:
Take additional precision into account.
mysql-test/suite/funcs_1/r/myisam_func_view.result:
Take additional precision into account.
mysql-test/suite/funcs_1/r/myisam_views.result:
Take additional precision into account.
The test case relies on binlog entries for assertion. The problem is that the
binlog does not get cleaned in pushbuild between tests, resulting in extra
entries in the result file, causing the test to fail.
This fix adds a reset master at the beginning of the test, so that we get a
clean binlog file.
TRUNCATE TABLE fails to replicate when stmt-based binlogging is not supported.
Correcting some tests that was failing in pushbuild as well as fixing result
file for some tests that are not executed in the default MTR run.
mysql-test/suite/binlog/t/binlog_truncate_innodb.test:
Need to reset master to avoid the check to be for the wrong binlog file.
mysql-test/suite/binlog/t/binlog_truncate_myisam.test:
Need to reset master to avoid the check to be for the wrong binlog file.
Post-merge fixes. Changes to some result sets.
mysql-test/r/commit_1innodb.result:
TRUNCATE TABLE does not cause the binary log to do commits any more.
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
TRUNCATE TABLE is not transactional, hence does not have BEGIN/COMMIT around itself.
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
TRUNCATE TABLE is not transactional, hence does not have BEGIN/COMMIT around itself.
mysql-test/suite/rpl/r/rpl_innodb_mixed_dml.result:
TRUNCATE TABLE is not transactional, hence does not have BEGIN/COMMIT around itself.
mysql-test/suite/rpl/r/rpl_truncate_2myisam.result:
STOP SLAVE was replaced with include file.
mysql-test/suite/rpl/r/rpl_truncate_3innodb.result:
STOP SLAVE was replaced with include file.
There is an inconsistency with DROP DATABASE IF EXISTS, DROP
TABLE IF EXISTS and DROP VIEW IF EXISTS: those are binlogged even
if the DB or TABLE does not exist, whereas DROP PROCEDURE IF
EXISTS does not. It would be nice or at least consistent if DROP
PROCEDURE/STATEMENT worked the same too.
Fixed DROP PROCEDURE|FUNCTION IF EXISTS by adding a call to
write_bin_log in mysql_execute_command. Checked also if all
documented "DROP (...) IF EXISTS" get binlogged. Left out DROP
SERVER IF EXISTS because it seems that it only gets binlogged when
using row event (see BUG#25705).
The problem is that a unfiltered user query was being passed as
the format string parameter of sql_print_warning which later
performs printf-like formatting, leading to crashes if the user
query contains formatting instructions (ie: %s). Also, it was
using THD::query as the source of the user query, but this
variable is not meaningful in some situations -- in a delayed
insert, it points to the table name.
The solution is to pass the user query as a parameter for the
format string and use the function parameter query_arg as the
source of the user query.
mysql-test/suite/binlog/r/binlog_unsafe.result:
Add test case result for Bug#42634
mysql-test/suite/binlog/t/binlog_unsafe.test:
Add test case for Bug#42634
sql/sql_class.cc:
Don't pass the user query as a format string.
Path composition for the relay log file that is stored into the relay index
file was not correct for windows.
mysql-test language does not provide primitives for portable path composition.
Fixed with storing only the basename part of the external "fake" relay log into
the relay index file.
Safety of removal of the dirname part of the relaylog is provided by logics of
`setup_fake_relay_log' that places the fake file into @@datadir directory.
mysql-test/include/setup_fake_relay_log.inc:
storing only the basename part of the external "fake" relay log into the relay
log index.
mysql-test/suite/rpl/t/rpl_cross_version.test:
restoring test for windows.
TRUNCATE TABLE fails to replicate when stmt-based binlogging is not supported.
There were two separate problems with the code, both of which are fixed with
this patch:
1. An error was printed by InnoDB for TRUNCATE TABLE in statement mode when
the in isolation levels READ COMMITTED and READ UNCOMMITTED since InnoDB
does permit statement-based replication for DML statements. However,
the TRUNCATE TABLE is not transactional, but is a DDL, and should therefore
be allowed to be replicated as a statement.
2. The statement was not logged in mixed mode because of the error above, but
the error was not reported to the client.
This patch fixes the problem by treating TRUNCATE TABLE a DDL, that is, it is
always logged as a statement and not reporting an error from InnoDB for TRUNCATE
TABLE.
mysql-test/extra/binlog_tests/binlog_truncate.test:
Adding new test to check that TRUNCATE TABLE is written correctly
to the binary log.
mysql-test/extra/rpl_tests/rpl_truncate.test:
Removing redundant testing by eliminating settings of BINLOG_FORMAT.
mysql-test/extra/rpl_tests/rpl_truncate_helper.test:
Replacing slave and master reset code with include file.
Removing settings of BINLOG_FORMAT.
Replacing printing of table contents to compare master and slave
with diff_tables.inc.
mysql-test/suite/binlog/t/binlog_truncate_innodb.test:
Adding test for testing that TRUNCATE TABLE is logged correctly for InnoDB
in all isolation levels.
mysql-test/suite/binlog/t/binlog_truncate_myisam.test:
Adding test for testing that TRUNCATE TABLE is logged correctly for MyISAM.
mysql-test/suite/binlog/t/disabled.def:
Disabling binlog_truncate_innodb since it does not work (yet).
sql/sql_base.cc:
Correcting setting of capabilities flags to make the comparison with 0
later in the code work correctly.
sql/sql_delete.cc:
Re-organizing code to ensure that TRUNCATE TABLE is logged in statement
format and that row format is not used unless there are rows to log (which
there are not when delete_all_rows() is called, so this has to be logged
as a statement).
Documented behaviour was broken by the patch for bug 33699
that actually is not a bug.
This fix reverts patch for bug 33699 and reverts the
UPDATE of NOT NULL field with NULL query to old
behavior.
mysql-test/extra/rpl_tests/rpl_extraMaster_Col.test:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/include/ps_modify.inc:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/r/auto_increment.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/r/csv_not_null.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/r/null.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/r/ps_2myisam.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/r/ps_3innodb.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/r/ps_4heap.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/r/ps_5merge.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/r/warnings.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/suite/ndb/r/ps_7ndb.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/suite/rpl/r/rpl_extraColmaster_innodb.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/suite/rpl/r/rpl_extraColmaster_myisam.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/suite/rpl/t/rpl_err_ignoredtable.test:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/t/auto_increment.test:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/t/csv_not_null.test:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/t/null.test:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/t/warnings.test:
Bug #39265: fix for the bug 33699 should be reverted
sql/sql_update.cc:
Bug #39265: fix for the bug 33699 should be reverted
The bug happened because filtering-out a STMT_END_F-flagged event so that
the transaction COMMIT finds traces of incomplete statement commit.
Such situation is only possible with ndb circular replication. The filtered-out
rows event is one that immediately preceeds the COMMIT query event.
Fixed with deploying an the rows-log-event statement commit at executing
of the transaction COMMIT event.
Resources that were allocated by other than STMT_END_F-flagged event of
the last statement are clean up prior execution of the commit logics.
mysql-test/suite/rpl_ndb/t/disabled.def:
re-enabling two tests.
sql/log_event.cc:
Adding the statement cleanup to execute at the transaction commit time.
The statement might not be ended with execution of STMT_END_F-flagged event because of
the event was filtered out by SERVER_ID rules.
Small refactoring for Rows_log_event::do_update_pos() to be split on two parts:
the statement commit that releases its execution time allocated resources, and
the relay log update.
There are two issues:
1. 6.0 uses the obsolate master-*** server options;
2. the test is not deterministic in that although master vs slave consistency is
fine, two runs of the test can have different results. The reason of the
non-determinism is the combination of
a chosen way to demo results and the ndb_autoincrement_prefetch_sz feature.
The current patch fixes the 2nd issue by putting out results via diff_table macro
instead of the former run-sensitive method.
The 1st issue is going to be fixed by a separate patch to 6.0.
mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_2ch.result:
results changed
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_2ch.test:
Test is refined to put out results via diff_table macro instead of the former run-sensitive
method.
Remove size of binlog file from SHOW BINARY LOGS.
Changing size of binlog file is an affect of adding or removing events to/from
binlog and it can be checked in next command of test: SHOW BINLOG EVENTS.
For SHOW BINARY LOGS statement enough to show the list of file names.
The test case proposed by the bugfix fails in bugteam trees after merging new
mtr from main. The failure is due to the fact that the binlog file location has
changed and is no more under $MYSQLTEST_VARDIR/log.
This patch fixes the test failure by setting the correct path to the binlog
file.
