This is a backport of the applicable part of
commit 93475aff8d and
commit 2c39f69d34
from 10.4.
Before 10.4 and Galera 4, WSREP_ON is a macro that points to
a global Boolean variable, so it is not that expensive to
evaluate, but we will add an unlikely() hint around it.
WSREP_ON_NEW: Remove. This macro was introduced in
commit c863159c32
when reverting WSREP_ON to its previous definition.
We replace some use of WSREP_ON with WSREP(thd), like it was done
in 93475aff8d. Note: the macro
WSREP() in 10.1 is equivalent to WSREP_NNULL() in 10.4.
Item_func_rand::seed_random(): Avoid invoking current_thd
when WSREP is not enabled.
If the server is compiled WITH_WSREP=OFF, we should avoid evaluating
conditions on a global variable that is constant.
WSREP_ON_: Renamed from WSREP_ON. Defined only WITH_WSREP=ON.
WSREP_ON: Defined as unlikely(WSREP_ON_).
wsrep_on(): Defined as WSREP_ON && wsrep_service->wsrep_on_func().
The reason why we have wsrep_on() at all is that the macro WSREP(thd)
depends on the definition of THD, and that is intentionally an opaque
data type for InnoDB. So, we cannot avoid invoking wsrep_on(), but
we can evaluate the less expensive condition WSREP_ON before calling
the function.
Several tests that involve stored procedures fail on 10.4 kvm-asan
(clang 10) due to stack overrun. The main contributor to this stack
overrun is mysql_execute_command(), which is invoked recursively
during stored procedure execution.
Rebuilding with cmake -DWITH_WSREP=OFF shrunk the stack frame size
of mysql_execute_command() by more than 10 kilobytes in a
WITH_ASAN=ON, CMAKE_BUILD_TYPE=Debug build. The culprit
turned out to be the macro WSREP_LOG, which is allocating a
separate 1KiB buffer for every occurrence.
We replace the macro with a function, so that the stack will be
allocated only when the function is actually invoked. In this way,
no stack space will be wasted by default (when WSREP and Galera
are disabled).
This backports commit b6c5657ef2
from MariaDB 10.3.1.
Without ASAN, compilers can be smarter and optimize the stack usage.
The original commit message mentions that 1KiB was saved on GCC 5.4,
and 4KiB on Mac OS X Lion, which presumably uses a clang-based compiler.
- Made WSREP_LOG a function and moved the body out of header.
- Reduced the stack allocated buffer size and implemented
reprint into dynamically allocated buffer if stack buffer is not
large enough to hold the message.
MDEV-21605 Clean up and speed up interfaces for binary row logging
MDEV-21617 Bug fix for previous version of this code
The intention is to have as few 'if' as possible in ha_write() and
related functions. This is done by pre-calculating once per statement the
row_logging state for all tables.
Benefits are simpler and faster code both when binary logging is disabled
and when it's enabled.
Changes:
- Added handler->row_logging to make it easy to check it table should be
row logged. This also made it easier to disabling row logging for system,
internal and temporary tables.
- The tables row_logging capabilities are checked once per "statements
that updates tables" in THD::binlog_prepare_for_row_logging() which
is called when needed from THD::decide_logging_format().
- Removed most usage of tmp_disable_binlog(), reenable_binlog() and
temporary saving and setting of thd->variables.option_bits.
- Moved checks that can't change during a statement from
check_table_binlog_row_based() to check_table_binlog_row_based_internal()
- Removed flag row_already_logged (used by sequence engine)
- Moved binlog_log_row() to a handler::
- Moved write_locked_table_maps() to THD::binlog_write_table_maps() as
most other related binlog functions are in THD.
- Removed binlog_write_table_map() and binlog_log_row_internal() as
they are now obsolete as 'has_transactions()' is pre-calculated in
prepare_for_row_logging().
- Remove 'is_transactional' argument from binlog_write_table_map() as this
can now be read from handler.
- Changed order of 'if's in handler::external_lock() and wsrep_mysqld.h
to first evaluate fast and likely cases before more complex ones.
- Added error checking in ha_write_row() and related functions if
binlog_log_row() failed.
- Don't clear check_table_binlog_row_based_result in
clear_cached_table_binlog_row_based_flag() as it's not needed.
- THD::clear_binlog_table_maps() has been replaced with
THD::reset_binlog_for_next_statement()
- Added 'MYSQL_OPEN_IGNORE_LOGGING_FORMAT' flag to open_and_lock_tables()
to avoid calculating of binary log format for internal opens. This flag
is also used to avoid reading statistics tables for internal tables.
- Added OPTION_BINLOG_LOG_OFF as a simple way to turn of binlog temporary
for create (instead of using THD::sql_log_bin_off.
- Removed flag THD::sql_log_bin_off (not needed anymore)
- Speed up THD::decide_logging_format() by remembering if blackhole engine
is used and avoid a loop over all tables if it's not used
(the common case).
- THD::decide_logging_format() is not called anymore if no tables are used
for the statement. This will speed up pure stored procedure code with
about 5%+ according to some simple tests.
- We now get annotated events on slave if a CREATE ... SELECT statement
is transformed on the slave from statement to row logging.
- In the original code, the master could come into a state where row
logging is enforced for all future events if statement could be used.
This is now partly fixed.
Other changes:
- Ensure that all tables used by a statement has query_id set.
- Had to restore the row_logging flag for not used tables in
THD::binlog_write_table_maps (not normal scenario)
- Removed injector::transaction::use_table(server_id_type sid, table tbl)
as it's not used.
- Cleaned up set_slave_thread_options()
- Some more DBUG_ENTER/DBUG_RETURN, code comments and minor indentation
changes.
- Ensure we only call THD::decide_logging_format_low() once in
mysql_insert() (inefficiency).
- Don't annotate INSERT DELAYED
- Removed zeroing pos_in_table_list in THD::open_temporary_table() as it's
already 0
* Remove dead code
* MDEV-21675 Data inconsistency after multirow insert rollback
This patch fixes data inconsistencies that happen after rollback of
multirow inserts, with binlog disabled.
For example, statements such as `INSERT INTO t1 VALUES (1,'a'),(1,'b')`
that fail with duplicate key error. In such cases the whole statement
is rolled back. However, with wsrep_emulate_binlog in effect, the
IO_CACHE would not be truncated, and the pending rows events would be
replicated to the rest of the cluster. In the above example, it would
result in row (1,'a') being replicated, whereas locally the statement
is rolled back entirely. Making the cluster inconsistent.
The patch changes the code so that prior to statement rollback,
pending rows event are removed and the stmt cache reset.
That patch also introduces MTR tests that excercise multirow insert
statements for regular, and streaming replication.
Introduced a new wsrep_strict_ddl configuration variable in which
Galera checks storage engine of the effected table. If table is not
InnoDB (only storage engine currently fully supporting Galera
replication) DDL-statement will return error code:
ER_GALERA_REPLICATION_NOT_SUPPORTED
eng "DDL-statement is forbidden as table storage engine does not support Galera replication"
However, when wsrep_replicate_myisam=ON we allow DDL-statements to
MyISAM tables. If effected table is allowed storage engine Galera
will run normal TOI.
This new setting should be for now set globally on all
nodes in a cluster. When this setting is set following DDL-clauses
accessing tables not supporting Galera replication are refused:
* CREATE TABLE (e.g. CREATE TABLE t1(a int) engine=Aria
* ALTER TABLE
* TRUNCATE TABLE
* CREATE VIEW
* CREATE TRIGGER
* CREATE INDEX
* DROP INDEX
* RENAME TABLE
* DROP TABLE
Statements on PROCEDURE, EVENT, FUNCTION are allowed as effected
tables are known only at execution. Furthermore, USER, ROLE, SERVER,
DATABASE statements are also allowed as they do not really have
effected table.
Function `signal_waiters` assigned `m_committed_seqno` variable outside of
mutex lock which caused incorrect behavior of WSREP_SYNC_WAIT_UPTO_GTID.
Fixed by moving assignment inside lock. Added handling of OOM and now
error is reported.
Remove hard-coded seqno value and read seqno directly from current node state.
Support for galera GTID consistency thru cluster. All nodes in cluster
should have same GTID for replicated events which are originating from cluster.
Cluster originating commands need to contain sequential WSREP GTID seqno
Ignore manual setting of gtid_seq_no=X.
In master-slave scenario where master is non galera node replicated GTID is
replicated and is preserved in all nodes.
To have this - domain_id, server_id and seqnos should be same on all nodes.
Node which bootstraps the cluster, to achieve this, sends domain_id and
server_id to other nodes and this combination is used to write GTID for events
that are replicated inside cluster.
Cluster nodes that are executing non replicated events are going to have different
GTID than replicated ones, difference will be visible in domain part of gtid.
With wsrep_gtid_domain_id you can set domain_id for WSREP cluster.
Functions WSREP_LAST_WRITTEN_GTID, WSREP_LAST_SEEN_GTID and
WSREP_SYNC_WAIT_UPTO_GTID now works with "native" GTID format.
Fixed galera tests to reflect this chances.
Add variable to manually update WSREP GTID seqno in cluster
Add variable to manipulate and change WSREP GTID seqno. Next command
originating from cluster and on same thread will have set seqno and
cluster should change their internal counter to it's value.
Behavior is same as using @@gtid_seq_no for non WSREP transaction.
This is 10.4 version.
Idea is to create monitor thread for both donor and joiner that will
periodically if needed extend systemd timeout while SST is being
processed. In 10.4 actual SST is executed by running SST script
and exchanging messages on pipe using blocking fgets. This fix
starts monitoring thread before SST script is started and
we stop monitoring thread when SST has been completed.
- WSREP_DEBUG called WSREP_LOG which allocated a 1K variable on stack
for each macro usage (at least gcc can't reuse the stack space).
Move this concatenation to happen compile-time, not run-time.
Problem was that wsrep thread argument was deleted on wrong
place. Furthermore, scan method incorrectly used unsafe c_ptr().
Finally, fixed wsrep thread initialization to correctly set
up thread_id and pass correct argument to functions and
fix signess problem causing compiler errors.
Galera threads were not registered to performance schema and
used pthread_create when mysql_thread_create should have been
used.
Added test case to verify current galera performance schema
instrumentation does work.
Problem was that tests select INFORMATION_SCHEMA.PROCESSLIST processes
from user system user and empty state. Thus, there is not clear
state for slave threads.
Changes:
- Added new status variables that store current amount of applier threads
(wsrep_applier_thread_count) and rollbacker threads
(wsrep_rollbacker_thread_count). This will make clear how many slave threads
of certain type there is.
- Added THD state "wsrep applier idle" when applier slave thread is
waiting for work. This makes finding slave/applier threads easier.
- Added force-restart option for mtr to always restart servers between tests
to avoid race on start of the test
- Added wait_condition_with_debug to wait until the passed statement returns
true, or the operation times out. If operation times out, the additional error
statement will be executed
Changes to be committed:
new file: mysql-test/include/force_restart.inc
new file: mysql-test/include/wait_condition_with_debug.inc
modified: mysql-test/mysql-test-run.pl
modified: mysql-test/suite/galera/disabled.def
modified: mysql-test/suite/galera/r/MW-336.result
modified: mysql-test/suite/galera/r/galera_kill_applier.result
modified: mysql-test/suite/galera/r/galera_var_slave_threads.result
new file: mysql-test/suite/galera/t/MW-336.cnf
modified: mysql-test/suite/galera/t/MW-336.test
modified: mysql-test/suite/galera/t/galera_kill_applier.test
modified: mysql-test/suite/galera/t/galera_parallel_autoinc_largetrx.test
modified: mysql-test/suite/galera/t/galera_parallel_autoinc_manytrx.test
modified: mysql-test/suite/galera/t/galera_var_slave_threads.test
modified: mysql-test/suite/wsrep/disabled.def
modified: mysql-test/suite/wsrep/r/variables.result
modified: mysql-test/suite/wsrep/t/variables.test
modified: sql/mysqld.cc
modified: sql/wsrep_mysqld.cc
modified: sql/wsrep_mysqld.h
modified: sql/wsrep_thd.cc
modified: sql/wsrep_var.cc
* MDEV-16509 Improve wsrep commit performance with binlog disabled
Release commit order critical section early after trx_commit_low() if
binlog is not transaction coordinator. In order to avoid two phase commit,
binlog_hton is not registered for THD during IO_CACHE population.
Implemented a test which verifies that the transactions release
commit order early.
This optimization will change behavior during recovery as the commit
is not two phase when binlog is off. Fixed and recorded wsrep-recover-v25
and wsrep-recover to match the behavior.
* MDEV-18730 Ordering for wsrep binlog group commit
Previously out of order execution was allowed for wsrep commits.
Established proper ordering by populating wait_for_commit
for every wsrep THD and making group commit leader to wait for
prior commits before proceeding to trx_group_commit_leader().
* MDEV-18730 Added a test case to verify correct commit ordering
* MDEV-16509, MDEV-18730 Review fixes
Use WSREP_EMULATE_BINLOG() macro to decide if the binlog_hton
should be registered. Whitespace/syntax fixes and cleanups.
* MDEV-16509 Require binlog for galera_var_innodb_disallow_writes test
If the commit to InnoDB is done in one phase, the native InnoDB behavior
is that the transaction is committed in memory before it is persisted to
disk. This means that the innodb_disallow_writes=ON may not prevent
transaction to become visible to other readers before commit is completely
over. On the other hand, if the commit is two phase (as it is with binlog),
the transaction will be blocked in prepare phase.
Fixed the test to use binlog, which enforces two phase commit, which
in turn makes commit to block before the changes become visible to
other connections. This guarantees that the test produces expected
result.
Removed redundant initialisation in unireg_init(): already done by
mysql_init_variables().
Slave threads already check THD::killed, which eliminates the need to
check abort_loop.
Removed unused wsrep_kill_mysql().
Refactored wsrep patch to not use LOCK_thread_count and COND_thread_count anymore.
This has partially been replaced by using old LOCK_wsrep_slave_threads mutex.
For slave thread count change waiting, new COND_wsrep_slave_threads signal has been added
Added LOCK_wsrep_cluster_config mutex to control that cluster address change cannot happen in parallel
Protected wsrep_slave_threads variable changes with LOCK_cluster_config mutex
This is for avoiding concurrent slave thread count and cluster joining operations to happen
Fixes according to Teemu's review
* Removed all references related to wsrep_thd_pool (which was removed)
* Removed unused declarations in wsrep_schema.h
* The following would result invalid reads in
Wsrep_schema::replay_transaction():
```
frag_table->field[4]->val_str(&buf);
Wsrep_schema_impl::end_index_scan(frag_table);
Wsrep_schema_impl::finish_stmt(thd);
ret= wsrep_apply_events(thd, rli, buf.c_ptr_safe(), buf.length());
```
because `buf` was accessed after closing the table. The fix is to
perform storage reads using a different THD.
* In Wsrep_schema::recover_sr_transactions(), cluster_table was opened
for write, however it is only read here. And frag_table was opened
for read, wereas write is potentially needed.
Also, avoid copy caused by String::c_ptr() to zero terminate the c
string, use c_ptr_quick instead.
Global variable wsrep_debug now can be used to filter wsrep-lib messages based on debug level provided.
Type of wsrep_debug is now set to be unsigned int, so tests and configuration files changed accordingly.
If wsrep_load_data_splitting is configured, change streaming replication
parameters internally to match the original behavior, i.e. replicate
on every 10000 rows. After load data is over, restore original
streaming replication settings.
Removed redundant wsrep_tc_log_commit().
