- Major rewrite of ddl_log.cc and ddl_log.h
- ddl_log.cc described in the beginning how the recovery works.
- ddl_log.log has unique signature and is dynamic. It's easy to
add more information to the header and other ddl blocks while still
being able to execute old ddl entries.
- IO_SIZE for ddl blocks is now dynamic. Can be changed without affecting
recovery of old logs.
- Code is more modular and is now usable outside of partition handling.
- Renamed log file to dll_recovery.log and added option --log-ddl-recovery
to allow one to specify the path & filename.
- Added ddl_log_entry_phase[], number of phases for each DDL action,
which allowed me to greatly simply set_global_from_ddl_log_entry()
- Changed how strings are stored in log entries, which allows us to
store much more information in a log entry.
- ddl log is now always created at start and deleted on normal shutdown.
This simplices things notable.
- Added probes debug_crash_here() and debug_simulate_error() to simply
crash testing and allow crash after a given number of times a probe
is executed. See comments in debug_sync.cc and rename_table.test for
how this can be used.
- Reverting failed table and view renames is done trough the ddl log.
This ensures that the ddl log is tested also outside of recovery.
- Added helper function 'handler::needs_lower_case_filenames()'
- Extend binary log with Q_XID events. ddl log handling is using this
to check if a ddl log entry was logged to the binary log (if yes,
it will be deleted from the log during ddl_log_close_binlogged_events()
- If a DDL entry fails 3 time, disable it. This is to ensure that if
we have a crash in ddl recovery code the server will not get stuck
in a forever crash-restart-crash loop.
mysqltest.cc changes:
- --die will now replace $variables with their values
- $error will contain the error of the last failed statement
storage engine changes:
- maria_rename() was changed to be more robust against crashes during
rename.
This change is to get rid of randomly failing tests, especially those
that reads random position of the binary log. From looking at the logs
it's clear that some failures is because of a read char (with value >= 128)
is converted to a big long value. Using uchar everywhere makes this much
less likely to happen.
Another benefit is that a lot of cast of char to uchar could be removed.
Other things:
- Removed some extra space before '=' and '+=' in assignments
- Fixed indentations and lines > 80 characters
- Replace '16' with 'element_size' (from class definition) in
Gtid_list_log_event()
This change removed 68 explict strlen() calls from the code.
The following renames was done to ensure we don't use the old names
when merging code from earlier releases, as using the new variables
for print function could result in crashes:
- charset->csname renamed to charset->cs_name
- charset->name renamed to charset->coll_name
Almost everything where mechanical changes except:
- Changed to use the new Protocol::store(LEX_CSTRING..) when possible
- Changed to use field->store(LEX_CSTRING*, CHARSET_INFO*) when possible
- Changed to use String->append(LEX_CSTRING&) when possible
Other things:
- There where compiler issues with ensuring that all character set names
points to the same string: gcc doesn't allow one to use integer constants
when defining global structures (constant char * pointers works fine).
To get around this, I declared defines for each character set name
length.
Changes:
- To detect automatic strlen() I removed the methods in String that
uses 'const char *' without a length:
- String::append(const char*)
- Binary_string(const char *str)
- String(const char *str, CHARSET_INFO *cs)
- append_for_single_quote(const char *)
All usage of append(const char*) is changed to either use
String::append(char), String::append(const char*, size_t length) or
String::append(LEX_CSTRING)
- Added STRING_WITH_LEN() around constant string arguments to
String::append()
- Added overflow argument to escape_string_for_mysql() and
escape_quotes_for_mysql() instead of returning (size_t) -1 on overflow.
This was needed as most usage of the above functions never tested the
result for -1 and would have given wrong results or crashes in case
of overflows.
- Added Item_func_or_sum::func_name_cstring(), which returns LEX_CSTRING.
Changed all Item_func::func_name()'s to func_name_cstring()'s.
The old Item_func_or_sum::func_name() is now an inline function that
returns func_name_cstring().str.
- Changed Item::mode_name() and Item::func_name_ext() to return
LEX_CSTRING.
- Changed for some functions the name argument from const char * to
to const LEX_CSTRING &:
- Item::Item_func_fix_attributes()
- Item::check_type_...()
- Type_std_attributes::agg_item_collations()
- Type_std_attributes::agg_item_set_converter()
- Type_std_attributes::agg_arg_charsets...()
- Type_handler_hybrid_field_type::aggregate_for_result()
- Type_handler_geometry::check_type_geom_or_binary()
- Type_handler::Item_func_or_sum_illegal_param()
- Predicant_to_list_comparator::add_value_skip_null()
- Predicant_to_list_comparator::add_value()
- cmp_item_row::prepare_comparators()
- cmp_item_row::aggregate_row_elements_for_comparison()
- Cursor_ref::print_func()
- Removes String_space() as it was only used in one cases and that
could be simplified to not use String_space(), thanks to the fixed
my_vsnprintf().
- Added some const LEX_CSTRING's for common strings:
- NULL_clex_str, DATA_clex_str, INDEX_clex_str.
- Changed primary_key_name to a LEX_CSTRING
- Renamed String::set_quick() to String::set_buffer_if_not_allocated() to
clarify what the function really does.
- Rename of protocol function:
bool store(const char *from, CHARSET_INFO *cs) to
bool store_string_or_null(const char *from, CHARSET_INFO *cs).
This was done to both clarify the difference between this 'store' function
and also to make it easier to find unoptimal usage of store() calls.
- Added Protocol::store(const LEX_CSTRING*, CHARSET_INFO*)
- Changed some 'const char*' arrays to instead be of type LEX_CSTRING.
- class Item_func_units now used LEX_CSTRING for name.
Other things:
- Fixed a bug in mysql.cc:construct_prompt() where a wrong escape character
in the prompt would cause some part of the prompt to be duplicated.
- Fixed a lot of instances where the length of the argument to
append is known or easily obtain but was not used.
- Removed some not needed 'virtual' definition for functions that was
inherited from the parent. I added override to these.
- Fixed Ordered_key::print() to preallocate needed buffer. Old code could
case memory overruns.
- Simplified some loops when adding char * to a String with delimiters.
The --help comment for the --base64-output option in
mysqlbinlog was hard to decipher. This quick patch aims
to refine it.
Reviewed By:
==========
Andrei Elkin: <andrei.elkin@mariadb.com>
This patch changes the main name of 3 byte character set from utf8 to
utf8mb3. New old_mode UTF8_IS_UTF8MB3 is added and set TRUE by default,
so that utf8 would mean utf8mb3. If not set, utf8 would mean utf8mb4.
Problem:
=======
The ALWAYS option of the mariadb-binlog --base64-output flag
formats its output incorrectly. This option is deprecated, and
MySQL 8.0 has removed it entirely.
Solution:
========
Adhere to MySQL and remove this option from MariaDB.
Behavioral Changes:
==================
Use Case: ./mariadb-binlog --base64-output
Previous Behavior: Sets base64-output mode to always
New Behavior: Error message indicating incomplete argument
Use Case: ./mariadb-binlog --base64-output=always
Previous Behavior: Sets base64-output mode to always
New Behavior: Error message indicating invalid argument value
Reviewed By:
==========
Andrei Elkin: <andrei.elkin@mariadb.com>
Problem:
=======
MariaDB's command line utilities (e.g., mysql,
mysqldump, etc) silently ignore connection
property options (e.g., --port and --socket)
when protocol is not explicitly set via the
command-line for localhost connections.
Fix:
===
If connection properties are specified without a
protocol, override the protocol to be consistent.
For example, if --port is specified, automatically
set protocol=tcp.
Caveats:
=======
* When multiple connection properties are
specified, nothing is overridden
* If protocol is is set via the command-line,
its value is used
Reviewers:
========
Sergei Golubchik <serg@mariadb.com>
Vladislav Vaintroub <wlad@mariadb.com>
The easiest way to compile and test the server with UBSAN is to run:
./BUILD/compile-pentium64-ubsan
and then run mysql-test-run.
After this commit, one should be able to run this without any UBSAN
warnings. There is still a few compiler warnings that should be fixed
at some point, but these do not expose any real bugs.
The 'special' cases where we disable, suppress or circumvent UBSAN are:
- ref10 source (as here we intentionally do some shifts that UBSAN
complains about.
- x86 version of optimized int#korr() methods. UBSAN do not like unaligned
memory access of integers. Fixed by using byte_order_generic.h when
compiling with UBSAN
- We use smaller thread stack with ASAN and UBSAN, which forced me to
disable a few tests that prints the thread stack size.
- Verifying class types does not work for shared libraries. I added
suppression in mysql-test-run.pl for this case.
- Added '#ifdef WITH_UBSAN' when using integer arithmetic where it is
safe to have overflows (two cases, in item_func.cc).
Things fixed:
- Don't left shift signed values
(byte_order_generic.h, mysqltest.c, item_sum.cc and many more)
- Don't assign not non existing values to enum variables.
- Ensure that bool and enum values are properly initialized in
constructors. This was needed as UBSAN checks that these types has
correct values when one copies an object.
(gcalc_tools.h, ha_partition.cc, item_sum.cc, partition_element.h ...)
- Ensure we do not called handler functions on unallocated objects or
deleted objects.
(events.cc, sql_acl.cc).
- Fixed bugs in Item_sp::Item_sp() where we did not call constructor
on Query_arena object.
- Fixed several cast of objects to an incompatible class!
(Item.cc, Item_buff.cc, item_timefunc.cc, opt_subselect.cc, sql_acl.cc,
sql_select.cc ...)
- Ensure we do not do integer arithmetic that causes over or underflows.
This includes also ++ and -- of integers.
(Item_func.cc, Item_strfunc.cc, item_timefunc.cc, sql_base.cc ...)
- Added JSON_VALUE_UNITIALIZED to json_value_types and ensure that
value_type is initialized to this instead of to -1, which is not a valid
enum value for json_value_types.
- Ensure we do not call memcpy() when second argument could be null.
- Fixed that Item_func_str::make_empty_result() creates an empty string
instead of a null string (safer as it ensures we do not do arithmetic
on null strings).
Other things:
- Changed struct st_position to an OBJECT and added an initialization
function to it to ensure that we do not copy or use uninitialized
members. The change to a class was also motived that we used "struct
st_position" and POSITION randomly trough the code which was
confusing.
- Notably big rewrite in sql_acl.cc to avoid using deleted objects.
- Changed in sql_partition to use '^' instead of '-'. This is safe as
the operator is either 0 or 0x8000000000000000ULL.
- Added check for select_nr < INT_MAX in JOIN::build_explain() to
avoid bug when get_select() could return NULL.
- Reordered elements in POSITION for better alignment.
- Changed sql_test.cc::print_plan() to use pointers instead of objects.
- Fixed bug in find_set() where could could execute '1 << -1'.
- Added variable have_sanitizer, used by mtr. (This variable was before
only in 10.5 and up). It can now have one of two values:
ASAN or UBSAN.
- Moved ~Archive_share() from ha_archive.cc to ha_archive.h and marked
it virtual. This was an effort to get UBSAN to work with loaded storage
engines. I kept the change as the new place is better.
- Added in CONNECT engine COLBLK::SetName(), to get around a wrong cast
in tabutil.cpp.
- Added HAVE_REPLICATION around usage of rgi_slave, to get embedded
server to compile with UBSAN. (Patch from Marko).
- Added #ifdef for powerpc64 to avoid a bug in old gcc versions related
to integer arithmetic.
Changes that should not be needed but had to be done to suppress warnings
from UBSAN:
- Added static_cast<<uint16_t>> around shift to get rid of a LOT of
compiler warnings when using UBSAN.
- Had to change some '/' of 2 base integers to shift to get rid of
some compile time warnings.
Reviewed by:
- Json changes: Alexey Botchkov
- Charset changes in ctype-uca.c: Alexander Barkov
- InnoDB changes & Embedded server: Marko Mäkelä
- sql_acl.cc changes: Vicențiu Ciorbaru
- build_explain() changes: Sergey Petrunia
One should not change the program arguments!
This change also reduces warnings from the icc compiler.
Almost all changes are just syntax changes (adding const to
'get_one_option function' declarations).
Other changes:
- Added a few cast of 'argument' from 'const char*' to 'char *'. This
was mainly in calls to 'external' functions we don't have control of.
- Ensure that all reset of 'password command line argument' are similar.
(In almost all cases it was just adding a comment and a cast)
- In mysqlbinlog.cc and mysqld.cc there was a few cases that changed
the command line argument. These places where changed to instead allocate
the option in a MEM_ROOT to avoid changing the argument. Some of this
code was changed to ensure that different programs did parsing the
same way. Added a test case for the changes in mysqlbinlog.cc
- Changed a few variables that took their value from command line options
from 'char *' to 'const char *'.
a. The change makes `mariadb-upgrade` detect if `MYSQL_JSON` data type is needed.
b. Install the data type if it's not installed.
c. Uninstalls the data type once finished.
d. Create `.opt` and `.inc` files `have_type_mysql_json` and adapt the
tests
Reviewed by: vicentiu@mariadb.org
statistics calculation
Analysis: When --replace or --insert-ignore is not given, dumping of
mysql.innodb_index_stats and mysql.innodb_table_stats will result into race
condition.
Fix: Check if these options are present with --system=stats (because dumping
under --system=stats is safe). Otherwise, dump only structure, ignoring data
because innodb will recalculate data anyway.
Dump sequences first.
This atch made to keep it small and
to keep number of queries to the server the same.
Order of tables in a dump can not be changed
(except sequences first) because mysql_list_tables
uses SHOW TABLES and I used SHOW FULL TABLES.
statistics calculation
mysqldump --system=stats and --system=timezones by default used
ordinary INSERT statements populate EITS, innodb stats, and timezone tables.
As these all have primary keys it could result in conflict.
The behavior desired with --system= is to replace the tables.
As such we assume --replace for the purposes of stats and timezone tables
there if --insert-ignore isn't specified.
This follows up commit
commit 94a520ddbe and
commit 7c5519c12d.
After these changes, the default test suites on a
cmake -DWITH_UBSAN=ON build no longer fail due to passing
null pointers as parameters that are declared to never be null,
but plenty of other runtime errors remain.
Add --system={all, users, plugins, udfs, servers, stats, timezones}
This will dump system information from the server in
a logical form like:
* CREATE USER
* GRANT
* SET DEFAULT ROLE
* CREATE ROLE
* CREATE SERVER
* INSTALL PLUGIN
* CREATE FUNCTION
"stats" is the innodb statistics tables or EITS and
these are dumped as INSERT/REPLACE INTO statements
without recreating the table.
"timezones" is the collection of timezone tables
which are important to transfer to generate identical
results on restoration.
Two other options have an effect on the SQL generated by
--system=all. These are mutually exclusive of each other.
* --replace
* --insert-ignore
--replace will include "OR REPLACE" into the logical form
like:
* CREATE OR REPLACE USER ...
* DROP ROLE IF EXISTS (MySQL-8.0+)
* CREATE OR REPLACE ROLE ...
* UNINSTALL PLUGIN IF EXISTS (10.4+) ... (before INSTALL PLUGIN)
* DROP FUNCTION IF EXISTS (MySQL-5.7+)
* CREATE OR REPLACE [AGGREGATE] FUNCTION
* CREATE OR REPLACE SERVER
--insert-ignore uses the construct " IF NOT EXISTS" where
supported in the logical syntax.
'CREATE OR REPLACE USER' includes protection against
being run as the same user that is importing the mysqldump.
Includes experimental support for dumping mysql-5.7/8.0
system tables and exporting logical SQL compatible with MySQL.
Updates mysqldump man page, including this information and
(removing obsolute bug reference)
Reviewed-by: anel@mariadb.org
