write()/read()
Sometimes stop/restart master or stop/restart salve can cause
network error, which can cause the 'invalid file descriptor
-1 in syscall write()/read()' warnings. All involved test
cases except rpl_slave_load_remove_tmpfile belong to the
kind of network error. So they are expected.
The 'rpl_slave_load_remove_tmpfile' belongs to file error,
but it is testing the file error as following code:
DBUG_EXECUTE_IF("remove_slave_load_file_before_write",
my_close(fd,MYF(0)); fd= -1; my_delete(fname, MYF(0)););
So it's expected too.
To fix the problem, add the valgrind warnings to the global
suppression list to suppress it.
The test case rpl_binlog_corruption fails on windows because when
adding a line to the binary log index file it gets terminated
with a CR+LF (which btw, is the normal case in windows, but not on
Unixes - LF). This causes mismatch between the relay log names,
causing mysqld to report that it cannot find the log file.
We fix this by creating the instrumented index file through
mysql, ie, using SELECT ... INTO DUMPFILE ..., as opposed on
relying on ultimatly OS commands like: -- echo "..." >
index. These changes go into the file and make the procedure
platform independent:
include/setup_fake_relay_log.inc
Side note: when using SELECT ... INTO DUMPFILE ..., one needs to
check if mysqld is running with secure_file_priv. If it is, we do
it in two steps: 1. create the file on the allowed location;
2. move it to the datadir. If it is not, then we just create the
file directly on the datadir (so previous step 2. is not needed).
Manually deleteing one or more entries from 'master-bin.index', will
cause master infinitely loop to send one binlog file.
When starting a dump session, master opens index file and search the binlog file
which is being requested by the slave. The position of the binlog file in the
index file is recorded. it will be used to find the next binlog file when current
binlog file has dumped completely. As only the position is used, it may
not get the correct file if some entries has been removed manually from the index file.
the master will reopen the current binlog file which has been dump completely
and redump it if it can not get the next binlog file's name from index file.
It obviously is a logical error.
Even though it is allowed to manually change index file,
but it is not recommended. so after this patch, master
sends a fatal error to slave and close the dump session if a new binlog file
has been generated and master can not get it from the index file.
BUG#47983: rpl_extraColmaster_myisam failed in PB2 with "Found
warnings!!"
BUG 45214 fixed the case when get_master_version_and_clock
function, used by the slave, would not report errors. The slave
now detects them and if related to transient network failures, it
prints some warnings and retries to connect. On the other hand,
if not network related, it just gives up and fails.
As such, sometimes, in PB2, the slave comes across some transient
communication issues between master and slave, while calling
get_master_version_and_clock, causing warnings print outs to the
error log. Nevertheless, in such cases slave retries to connect,
in which it succeeds, and the test case continues as it normally
would. But then, at the end of a successful test run, MTR checks
the error log, finds the unexpected warnings and considers them
harmful. This causes MTR to report error and, consequently, PB2
to report a failing test.
We fix this by adding to the global warnings suppress list the
warnings related to transient network failures only, which are
reported while in function get_master_version_and_clock.
Problem 1:
column_priv_hash uses utf8_general_ci collation
for the key comparison. The key consists of user name,
db name and table name. Thus user with privileges on table t1
is able to perform the same operation on T1
(the similar situation with user name & db name, see acl_cache).
So collation which is used for column_priv_hash and acl_cache
should be case sensitive.
The fix:
replace system_charset_info with my_charset_utf8_bin for
column_priv_hash and acl_cache
Problem 2:
The same situation with proc_priv_hash, func_priv_hash,
the only difference is that Routine name is case insensitive.
So the fix is to use my_charset_utf8_bin for
proc_priv_hash & func_priv_hash and convert routine name into lower
case before writing the element into the hash and
before looking up the key.
Additional fix: mysql.procs_priv Routine_name field collation
is changed to utf8_general_ci.
It's necessary for REVOKE command
(to find a field by routine hash element values).
Note:
It's safe for lower-case-table-names mode too because
db name & table name are converted into lower case
(see GRANT_NAME::GRANT_NAME).
- Remove the "hack" from mtr.pl that skipped searching for the .dll files
when embedded and windows. Now the variables will be preoperly initialized.
- Make the tests detect that they can't run on windows+embedded
Backport from 6.0 to 5.1.
Only those sync points are included, which are used in debug_sync.test.
The Debug Sync Facility allows to place synchronization points
in the code:
open_tables(...)
DEBUG_SYNC(thd, "after_open_tables");
lock_tables(...)
When activated, a sync point can
- Send a signal and/or
- Wait for a signal
Nomenclature:
- signal: A value of a global variable that persists
until overwritten by a new signal. The global
variable can also be seen as a "signal post"
or "flag mast". Then the signal is what is
attached to the "signal post" or "flag mast".
- send a signal: Assign the value (the signal) to the global
variable ("set a flag") and broadcast a
global condition to wake those waiting for
a signal.
- wait for a signal: Loop over waiting for the global condition until
the global value matches the wait-for signal.
Please find more information in the top comment in debug_sync.cc
or in the worklog entry.
All statements executed by mysql_upgrade are binlogged and then are replicated to slave.
This will result in some errors. The report of this bug has demonstrated some examples.
Master and slave should be upgraded separately. All statements executed by
mysql_upgrade will not be binlogged.
--write-binlog and --skip-write-binlog options are added into mysql_upgrade.
These options control whether sql statements are binlogged or not.
Invalid (old?) table or database name in logs
Problem was still not completely fixed, due to
qouting.
This is the server side only fix (in explain_filename),
the change from filename_to_tablename to use explain_filename
in the InnoDB code must be done before the bug is
fixed.
binlog
Mixing transactional (T) and non-transactional (N) tables on behalf of a
transaction may lead to inconsistencies among masters and slaves in STATEMENT
mode. The problem stems from the fact that although modifications done to
non-transactional tables on behalf of a transaction become immediately visible
to other connections they do not immediately get to the binary log and therefore
consistency is broken. Although there may be issues in mixing T and M tables in
STATEMENT mode, there are safe combinations that clients find useful.
In this bug, we fix the following issue. Mixing N and T tables in multi-level
(e.g. a statement that fires a trigger) or multi-table table statements (e.g.
update t1, t2...) were not handled correctly. In such cases, it was not possible
to distinguish when a T table was updated if the sequence of changes was N and T.
In a nutshell, just the flag "modified_non_trans_table" was not enough to reflect
that both a N and T tables were changed. To circumvent this issue, we check if an
engine is registered in the handler's list and changed something which means that
a T table was modified.
Check WL 2687 for a full-fledged patch that will make the use of either the MIXED or
ROW modes completely safe.
Problem was that the partition containing NULL values
was pruned away, since '2001-01-01' < '2001-02-00' but
TO_DAYS('2001-02-00') is NULL.
Added the NULL partition for RANGE/LIST partitioning on TO_DAYS()
function to be scanned too.
Also fixed a bug that added ALLOW_INVALID_DATES to sql_mode
(SELECT * FROM t WHERE date_col < '1999-99-99' on a RANGE/LIST
partitioned table would add it).
Replication SQL thread does not set database default charset to
thd->variables.collation_database properly, when executing LOAD DATA binlog.
This bug can be repeated by using "LOAD DATA" command in STATEMENT mode.
This patch adds code to find the default character set of the current database
then assign it to thd->db_charset when slave server begins to execute a relay log.
The test of this bug is added into rpl_loaddata_charset.test
Install procedure does not copy *.inc files located under the mysql-test/t directory.
Therefore, this patch moves the rpl_trigger.inc to the mysql-test/include directory.
1. BUG#21704 - Renaming column does not update FK definition
2. Changes in mysql-test/include/mtr_warnings.sql so that the testcase
for BUG#21704 doesn't fail because of the warnings generated.
Detailed revision comments:
r5488 | vasil | 2009-07-09 19:16:44 +0300 (Thu, 09 Jul 2009) | 13 lines
branches/5.1:
Fix Bug#21704 Renaming column does not update FK definition
by checking whether a column that participates in a FK definition is being
renamed and denying the ALTER in this case.
The patch was originally developed by Davi Arnaut <Davi.Arnaut@Sun.COM>:
http://lists.mysql.com/commits/77714
and was later adjusted to conform to InnoDB coding style by me (Vasil),
I also added some more comments and moved the bug specific mysql-test to
a separate file to make it more manageable and flexible.
use partial primary key if another index can prevent filesort
The fix for bug #28404 causes the covering ordering indexes to be
preferred unconditionally over non-covering and ref indexes.
Fixed by comparing the cost of using a covering index to the cost of
using a ref index even for covering ordering indexes.
Added an assertion to clarify the condition the local variables should
be in.
The test case added failed sporadically on PB. This is due to the
fact that the user thread in some cases is waiting for slave IO
to stop and then check the error number. Thence, sometimes the
user thread would race for the error number with IO thread.
This post push fix addresses this by replacing the wait for slave
io to stop with a wait for slave io error (as it seems it was
added in 6.0 also after patch on which this is based was
pushed). This implied backporting wait_for_slave_io_error.inc
from 6.0 also.
Large transactions and statements may corrupt the binary log if the size of the
cache, which is set by the max_binlog_cache_size, is not enough to store the
the changes.
In a nutshell, to fix the bug, we save the position of the next character in the
cache before starting processing a statement. If there is a problem, we simply
restore the position thus removing any effect of the statement from the cache.
Unfortunately, to avoid corrupting the binary log, we may end up loosing changes
on non-transactional tables if they do not fit in the cache. In such cases, we
store an Incident_log_event in order to stop the slave and alert users that some
changes were not logged.
Precisely, for every non-transactional changes that do not fit into the cache,
we do the following:
a) the statement is *not* logged
b) an incident event is logged after committing/rolling back the transaction,
if any. Note that if a failure happens before writing the incident event to
the binary log, the slave will not stop and the master will not have reported
any error.
c) its respective statement gives an error
For transactional changes that do not fit into the cache, we do the following:
a) the statement is *not* logged
b) its respective statement gives an error
To work properly, this patch requires two additional things. Firstly, callers to
MYSQL_BIN_LOG::write and THD::binlog_query must handle any error returned and
take the appropriate actions such as undoing the effects of a statement. We
already changed some calls in the sql_insert.cc, sql_update.cc and sql_insert.cc
modules but the remaining calls spread all over the code should be handled in
BUG#37148. Secondly, statements must be either classified as DDL or DML because
DDLs that do not get into the cache must generate an incident event since they
cannot be rolled back.
