Fix warnings flagged by the new warning option -Wunused-but-set-variable
that was added to GCC 4.6 and that is enabled by -Wunused and -Wall. The
option causes a warning whenever a local variable is assigned to but is
later unused. It also warns about meaningless pointer dereferences.
Problem: when SHOW BINLOG EVENTS was issued, it increased the value of
@@session.max_allowed_packet. This allowed a non-root user to increase
the amount of memory used by her thread arbitrarily. Thus, it removes
the bound on the amount of system resources used by a client, so it
presents a security risk (DoS attack).
Fix: it is correct to increase the value of @@session.max_allowed_packet
while executing SHOW BINLOG EVENTS (see BUG 30435). However, the
increase should only be temporary. Thus, the fix is to restore the value
when SHOW BINLOG EVENTS ends.
The value of @@session.max_allowed_packet is also increased in
mysql_binlog_send (i.e., the binlog dump thread). It is not clear if this
can cause any trouble, since normally the client that issues
COM_BINLOG_DUMP will not issue any other commands that would be affected
by the increased value of @@session.max_allowed_packet. However, we
restore the value just in case.
Apart strict-aliasing warnings, fix the remaining warnings
generated by GCC 4.4.4 -Wall and -Wextra flags.
One major source of warnings was the in-house function my_bcmp
which (unconventionally) took pointers to unsigned characters
as the byte sequences to be compared. Since my_bcmp and bcmp
are deprecated functions whose only difference with memcmp is
the return value, every use of the function is replaced with
memcmp as the special return value wasn't actually being used
by any caller.
There were also various other warnings, mostly due to type
mismatches, missing return values, missing prototypes, dead
code (unreachable) and ignored return values.
at mf_iocache.c, line 1722
The slave crashed while two threads: IO thread and user thread
raced for the same mutex (the append_buffer_lock protecting the
relay log's IO_CACHE). The IO thread was trying to flush the
cache, and for that was grabbing the append_buffer_lock.
However, the other thread was closing and reopening the relay log
when the IO thread tried to lock. Closing and reopening the log
includes destroying and reinitialising the IO_CACHE
mutex. Therefore, the IO thread tried to lock a destroyed mutex.
We fix this by backporting patch for BUG#50364 which fixed this
bug in mysql server 5.5+. The patch deploys missing
synchronization when flush_master_info is called and the relay
log is flushed by the IO thread. In detail the patch backports
revision (from mysql-trunk):
- luis.soares@sun.com-20100203165617-b1yydr0ee24ycpjm
This patch already includes the post-push fix also in BUG#50364:
- luis.soares@sun.com-20100222002629-0cijwqk6baxhj7gr
When issuing a 'CHANGE MASTER TO' statement, key elements of the previous
state, namely the host, port, the master_log_file and the master_log_pos
are dumped into the error log.
DBUG_SYNC_POINT has at least one strong limitation that it's not defined
on all platforms. It has issues cooperating with @@debug.
All in all its functionality is superseded by DEBUG_SYNC facility and
there is no reason to maintain the old less flexible one.
Fixed with adding debug_sync_set_action() function as a facility to set up
a sync-action in the server sources code and re-writing existing simulations
(found 3) to use it.
Couple of tests have been reworked as well.
The patch offers a pattern for setting sync-points in replication threads
where the standard DEBUG_SYNC does not suffice to reach goals.
logging is disabled
The server would hit an assertion because of a DBUG violation.
There was a missing DBUG_RETURN and instead a plain return
was used.
This patch replaces the return with DBUG_RETURN.
Manually deleteing one or more entries from 'master-bin.index', will
cause master infinitely loop to send one binlog file.
When starting a dump session, master opens index file and search the binlog file
which is being requested by the slave. The position of the binlog file in the
index file is recorded. it will be used to find the next binlog file when current
binlog file has dumped completely. As only the position is used, it may
not get the correct file if some entries has been removed manually from the index file.
the master will reopen the current binlog file which has been dump completely
and redump it if it can not get the next binlog file's name from index file.
It obviously is a logical error.
Even though it is allowed to manually change index file,
but it is not recommended. so after this patch, master
sends a fatal error to slave and close the dump session if a new binlog file
has been generated and master can not get it from the index file.
But there is no Last_IO_Error reported.
On the master, if a binary log event is larger than max_allowed_packet,
ER_MASTER_FATAL_ERROR_READING_BINLOG and the specific reason of this error is
sent to a slave when it requests a dump from the master, thus leading
the I/O thread to stop.
On a slave, the I/O thread stops when receiving a packet larger than max_allowed_packet.
In both cases, however, there was no Last_IO_Error reported.
This patch adds code to report the Last_IO_Error and exact reason before stopping the
I/O thread and also reports the case the out memory pops up while
handling packets from the master.
procedures causes crashes!
The problem of that bugreport was mostly fixed by the
patch for bug 38691.
However, attached test case focused on another crash or
valgrind warning problem: SHOW PROCESSLIST query accesses
freed memory of SP instruction that run in a parallel
connection.
Changes of thd->query/thd->query_length in dangerous
places have been guarded with the per-thread
LOCK_thd_data mutex (the THD::LOCK_delete mutex has been
renamed to THD::LOCK_thd_data).
The server was not cleaning the last IO error and error number when
resetting slave.
This patch addresses this issue by backporting into 5.1 part of the
patch in BUG 34654. A fix for this issue had already been pushed into
6.0 as part of the aforementioned bug, however the patch also included
some refactoring. The fix for 5.1 does not take into account the
refactoring part.
my_error() was invoked in reset_slave()'s with purge_relay_logs()-failing branch
without passing sql_errno to it.
Fixed with setting sql_errno= ER_RELAY_LOG_FAIL in the purge_relay_logs()-failing branch.
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
conflicts:
Text conflict in client/mysqltest.cc
Text conflict in mysql-test/include/wait_until_connected_again.inc
Text conflict in mysql-test/lib/mtr_report.pm
Text conflict in mysql-test/mysql-test-run.pl
Text conflict in mysql-test/r/events_bugs.result
Text conflict in mysql-test/r/log_state.result
Text conflict in mysql-test/r/myisam_data_pointer_size_func.result
Text conflict in mysql-test/r/mysqlcheck.result
Text conflict in mysql-test/r/query_cache.result
Text conflict in mysql-test/r/status.result
Text conflict in mysql-test/suite/binlog/r/binlog_index.result
Text conflict in mysql-test/suite/binlog/r/binlog_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_packet.result
Text conflict in mysql-test/suite/rpl/t/rpl_packet.test
Text conflict in mysql-test/t/disabled.def
Text conflict in mysql-test/t/events_bugs.test
Text conflict in mysql-test/t/log_state.test
Text conflict in mysql-test/t/myisam_data_pointer_size_func.test
Text conflict in mysql-test/t/mysqlcheck.test
Text conflict in mysql-test/t/query_cache.test
Text conflict in mysql-test/t/rpl_init_slave_func.test
Text conflict in mysql-test/t/status.test
Several system variables did not behave like system variables should do.
When trying to SET them or use them in SELECT, they were reported as
"unknown system variable". But they appeared in SHOW VARIABLES.
This has been fixed by removing the "fixed_vars" array of variables
and integrating the variables into the normal system variables chain.
All of these variables do now behave as read-only global-only
variables. Trying to SET them tells they are read-only, trying to
SELECT the session value tells they are global only. Selecting the
global value works. It delivers the same value as SHOW VARIABLES.
Rotate event is automatically generated and written when rotating binary
log or relay log. Rotate events for relay logs are usually ignored by slave
SQL thread becuase they have the same server id as that of the slave.
However, if --replicate-same-server-id is enabled, rotate event
for relay log would be treated as if it's a rotate event from master, and
would be executed by slave to update the rli->group_master_log_name and
rli->group_master_log_pos to a wrong value and cause the MASTER_POS_WAIT
function to fail and return NULL.
This patch fixed this problem by setting a flag bit (LOG_EVENT_RELAY_LOG_F)
in the event to tell the SQL thread to ignore these Rotate events generated
for relay logs.
This patch also added another binlog event flag bit (LOG_EVENT_ARTIFICIAL_F)
to distinquish faked events, the method used before this was by checking if
log_pos was zero.
exists t1,t2,t3'
Bug #34245 Test ndb_binlog_multi fails for 'CREATE TABLE'
Bug #34246 Test rpl_ndb_transaction fails with 'Failed to create
'mysql/ndb_apply_status'
Tests cases didn't wait for cluster to come up due to a typo
in have_multi_ndb.inc.
read_buffer_size set on master
BUG#33413 show binlog events fails if binlog has event size of close
to max_allowed_packet
The size of Append_block replication event was determined solely by
read_buffer_size whereas the rest of replication code deals with
max_allowed_packet.
When the former parameter was set to larger than the latter there were
two artifacts: the master could not read events from binlog;
show master events did not show.
Fixed with
- fragmenting the used io-cached buffer into pieces each size of less
than max_allowed_packet (bug#30435)
- incrementing show-binlog-events handling thread's max_allowed_packet
with the max estimated for the replication header size
ignores future_group_master_log_p
There was a redundant assignement. However, that's the only artifact.
Wrt to future_group_master_log_position, there is no issue.
The counter is supposed to be set at Log_event::exec_event().
It's used only by Innodb for recovery purposes.
Problem: one thread could read uninitialized memory from (the stack of) another
thread.
Fix: swapped order of initializing the memory and making it available to the
other thread.
Fix: put lock around the statement that makes the memory available to the other
thread.
Fix: all fields of the struct are now initialized in the constructor, to avoid
future problems.
