PROBLEM
-------
Memory sanitizer reports uninitialized comparisons
in log_in_use(), because strings are compared with
memcmp() instead of strncmp.
FIX
---
Use strncmp() to compare strings
MDEV-7257 made a dump thread to read from binlog concurrently with
writers as long as the read bytes are below a water-mark
(MYSQL_BIN_LOG::binlog_end_pos). However it appeared to be possible a
dump thread reader reach out for bytes past the water mark through a
feature of IO_CACHE that fills in the internal buffer and while doing
so it could read what the reader is not supposed to see (the bytes
above MYSQL_BIN_LOG::binlog_end_pos).
The issue is fixed with constraining the IO_CACHE buffer fill to respect
the watermark.
An added unit test proves reading from file is bound to an external
parameter
passed to {IO_CACHE::end_of_file} cache member.
MDEV-7257 made a dump thread to read from binlog concurrently with
writers as long as the read bytes are below a water-mark
(MYSQL_BIN_LOG::binlog_end_pos). However it appeared to be possible a
dump thread reader reach out for bytes past the water mark through a
feature of IO_CACHE that fills in the internal buffer and while doing
so it could read what the reader is not supposed to see (the bytes
above MYSQL_BIN_LOG::binlog_end_pos).
The issue is fixed with constraining the IO_CACHE buffer fill to respect
the watermark.
An added unit test proves reading from file is bound to an external
parameter
passed to {IO_CACHE::end_of_file} cache member.
replicate_events_marked_for_skip=FILTER_ON_MASTER
[Note this is a cherry-pick from 10.2 branch.]
When events of a big transaction are binlogged offsetting over 2GB from
the beginning of the log the semisync master's dump thread
lost such events.
The events were skipped by the Dump thread that found their skipping
status erroneously.
The current fixes make sure the skipping status is computed correctly.
The test verifies them simulating the 2GB offset.
replicate_events_marked_for_skip=FILTER_ON_MASTER
When events of a big transaction are binlogged offsetting over 2GB from
the beginning of the log the semisync master's dump thread
lost such events.
The events were skipped by the Dump thread that found their skipping
status erroneously.
The current fixes make sure the skipping status is computed correctly.
The test verifies them simulating the 2GB offset.
Other things, mainly to get
create_mysqld_error_find_printf_error tool to work:
- Added protection to not include mysqld_error.h twice
- Include "unireg.h" instead of "mysqld_error.h" in server
- Added protection if ER_XX messages are already defined
- Removed wrong calls to my_error(ER_OUTOFMEMORY) as
my_malloc() and my_alloc will do this automatically
- Added missing %s to ER_DUP_QUERY_NAME
- Removed old and wrong calls to my_strerror() when using
MY_ERROR_ON_RENAME (wrong merge)
- Fixed deadlock error message from Galera. Before the extra
information given to ER_LOCK_DEADLOCK was missing because
ER_LOCK_DEADLOCK doesn't provide any extra information.
I kept #ifdef mysqld_error_find_printf_error_used in sql_acl.h
to make it easy to do this kind of check again in the future
As reported in MDEV-11969 "there's no way to ditch knowledge" about some
domain that is no longer updated on a server. Besides being of annoyance to
clutter output in DBA console stale domains can prevent the slave
to connect the master as MDEV-12012 witnesses.
What domain is obsolete must be evaluated by the user (DBA) according
to whether the domain info is still relevant and will the domain ever
receive any update.
This patch introduces a method to discard obsolete gtid domains from
the server binlog state. The removal requires no event group from such
domain present in existing binlog files though. If there are any the
containing logs must be first PURGEd in order for
FLUSH BINARY LOGS DELETE_DOMAIN_ID=(list-of-domains)
succeed. Otherwise the command returns an error.
The list of obsolete domains can be computed through
intersecting two sets - the earliest (first) binlog's Gtid_list
and the current value of @@global.gtid_binlog_state - and extracting
the domain id components from the intersection list items.
The new DELETE_DOMAIN_ID featured FLUSH continues to rotate binlog
omitting the deleted domains from the active binlog file's Gtid_list.
Notice though when the command is ineffective - that none of requested to delete
domain exists in the binlog state - rotation does not occur.
Obsolete domain deletion is not harmful for connected slaves as long
as master side binlog files *purge* is synchronized with FLUSH-DELETE_DOMAIN_ID.
The slaves must have the last event from purged files processed as usual,
in order not to bump later into requesting a gtid from a file which
was already gone.
While the command is not replicated (as ordinary FLUSH BINLOG LOGS is)
slaves, even though having extra domains, won't suffer from reconnection errors
thanks to master-slave gtid connection protocol allowing the master
to be ignorant about a gtid domain.
Should at failover such slave to be promoted into master role it may run
the ex-master's
FLUSH BINARY LOGS DELETE_DOMAIN_ID=(list-of-domains)
to clean its own binlog state.
NOTES.
suite/perfschema/r/start_server_low_digest.result
is re-recorded as consequence of internal parser codes changes.
The reason for this is that stop slave takes LOCK_active_mi over the
whole operation while some slave operations will also need LOCK_active_mi
which causes deadlocks.
Fixed by introducing object counting for Master_info and not taking
LOCK_active_mi over stop slave or even stop_all_slaves()
Another benefit of this approach is that it allows:
- Multiple threads can run SHOW SLAVE STATUS at the same time
- START/STOP/RESET/SLAVE STATUS on a slave will not block other slaves
- Simpler interface for handling get_master_info()
- Added some missing unlock of 'log_lock' in error condtions
- Moved rpl_parallel_inactivate_pool(&global_rpl_thread_pool) to end
of stop_slave() to not have to use LOCK_active_mi inside
terminate_slave_threads()
- Changed argument for remove_master_info() to Master_info, as we always
have this available
- Fixed core dump when doing FLUSH TABLES WITH READ LOCK and parallel
replication. Problem was that waiting for pause_for_ftwrl was not done
when deleting rpt->current_owner after a force_abort.
Description:
============
If you have a relay log index file that has ended up with
some relay log files that do not exists, then RESET SLAVE
ALL is not enough to get back to a clean state.
Analysis:
=========
In the bug scenario slave server is in stopped state and
some of the relay logs got deleted but the relay log index
file is not updated.
During slave server restart replication initialization fails
as some of the required relay logs are missing. User
executes RESET SLAVE/RESET SLAVE ALL command to start a
clean slave. As per the documentation RESET SLAVE command
clears the master info and relay log info repositories,
deletes all the relay log files, and starts a new relay log
file. But in a scenario where the slave server's
Relay_log_info object is not initialized slave will not
purge the existing relay logs. Hence the index file still
remains in a bad state. Users will not be able to start
the slave unless these files are cleared.
Fix:
===
RESET SLAVE/RESET SLAVE ALL commands should do the cleanup
even in a scenario where Relay_log_info object
initialization failed.
Backported a flag named 'error_on_rli_init_info' which is
required to identify slave's Relay_log_info object
initialization failure. This flag exists in MySQL-5.6
onwards as part of BUG#14021292 fix.
During RESET SLAVE/RESET SLAVE ALL execution this flag
indicates the Relay_log_info initialization failure.
In such a case open the relay log index/relay log files
and do the required clean up.
Add some event types for the compressed event, there are:
QUERY_COMPRESSED_EVENT,
WRITE_ROWS_COMPRESSED_EVENT_V1,
UPDATE_ROWS_COMPRESSED_EVENT_V1,
DELETE_POWS_COMPRESSED_EVENT_V1,
WRITE_ROWS_COMPRESSED_EVENT,
UPDATE_ROWS_COMPRESSED_EVENT,
DELETE_POWS_COMPRESSED_EVENT.
These events inheritance the uncompressed editor events. One of their constructor functions and write
function have been overridden for uncompressing and compressing. Anything but this is totally the same.
On slave, The IO thread will uncompress and convert them When it receiving the events from the master.
So the SQL and worker threads can be stay unchanged.
Now we use zlib as compress algorithm. It maybe support other algorithm in the future.
Merge feature into 10.2 from feature branch.
Delayed replication adds an option
CHANGE MASTER TO master_delay=<seconds>
Replication will then delay applying events with that many
seconds. This creates a replication slave that reflects the state of
the master some time in the past.
Feature is ported from MySQL source tree.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
The original MySQL patch left some refactoring todo's, possibly
because of known conflicts with other parallel development (like
info-repository feature perhaps).
This patch fixes those todos/refactorings.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Initial merge of delayed replication from MySQL git.
The code from the initial push into MySQL is merged, and the
associated test case passes. A number of tasks are still pending:
1. Check full test suite run for any regressions or .result file updates.
2. Extend the feature to also work for parallel replication.
3. There are some todo-comments about future refactoring left from
MySQL, these should be located and merged on top.
4. There are some later related MySQL commits, these should be checked
and merged. These include:
e134b9362ba0b750d6ac1b444780019622d14aa5
b38f0f7857c073edfcc0a64675b7f7ede04be00f
fd2b210383358fe7697f201e19ac9779879ba72a
afc397376ec50e96b2918ee64e48baf4dda0d37d
5. The testcase from MySQL relies heavily on sleep and timing for
testing, and seems likely to sporadically fail on heavily loaded test
servers in buildbot or distro build farms.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
This makes it easier to setup master as on only have to set --log-bin.
Before this patch if one did set up the master with just --log-bin, slaves
could not connect until server_id was set on the master, which could be
both confusing and hard to do.
- Change some static variables to dynamic to ensure that we don't do any memory
allocations before server starts or stops
- Print more memory information on SIGHUP. Fixed output.
- Write out if memory was lost if run with --debug-at-exit
- Fixed wrong #ifdef in sql_cache.cc
Creating a CONNECT object on client connect and pass this to the working thread which creates the THD.
Split LOCK_thread_count to different mutexes
Added LOCK_thread_start to syncronize threads
Moved most usage of LOCK_thread_count to dedicated functions
Use next_thread_id() instead of thread_id++
Other things:
- Thread id now starts from 1 instead of 2
- Added cast for thread_id as thread id is now of type my_thread_id
- Made THD->host const (To ensure it's not changed)
- Removed some DBUG_PRINT() about entering/exiting mutex as these was already logged by mutex code
- Fixed that aborted_connects and connection_errors_internal are counted in all cases
- Don't take locks for current_linfo when we set it (not needed as it was 0 before)
This includes fixing all utilities to not have any memory leaks,
as safemalloc warnings stopped tests from passing on MacOSX.
- Ensure that all clients takes character-set-dir, as the
libmysqlclient library will use it.
- mysql-test-run now passes character-set-dir to all external clients.
- Changed dynstr_free() so that it can be called twice (made freeing code easier)
- Changed rpl_global_gtid_slave_state to be allocated dynamicly as it
includes a mutex that needs to be initizlied/destroyed before my_end() is called.
- Removed rpl_slave_state::init() and rpl_slave_stage::deinit() as
their job are better handling by constructor and delete.
- Print alias instead of table_name in check_duplicate_key as
table_name may have been converted to lower case.
Other things:
- Fixed a case in time_to_datetime_with_warn() where we where
using && instead of & in tests
Just "Master" could be understood as the master IP or hostname and thus can
cause confusion to db admins. "Master connection name" clearly states that
the log line contains connection name in the (possibly) multi-master setup.
