MDEV-10130 Assertion `share->in_trans == 0' failed in storage/maria/ma_close.c
MDEV-10378 Assertion `trn' failed in virtual int ha_maria::start_stmt
The problem was that maria_handler->trn was not properly reset
at commit/rollback and ha_maria::exernal_lock() could get confused
because.
There was some old code in ha_maria::implicit_commit() that tried
to take care of this, but it was not bullet proof.
Fixed by adding list of all tables that is part of the maria transaction to
TRN.
A nice side effect was of the fix is that loops in
ha_maria::implict_commit() got to be much simpler.
Other things:
- Fixed a bug in mysql_admin_table() where argument open_for_modify
was wrongly reset for the next table in the chain
- rollback admin command also in case of fatal error.
- Split _ma_set_trn_for_table() to three version to simplify code
and debugging.
- Several new asserts to detect the original problem (that file was
not properly removed from trn before calling ma_close())
ALTER TABLE ... ADD PARTITION modifies the open TABLE structure,
and sets table->need_reopen=1 to reset these modifications
in case of an error.
But under LOCK TABLES the table isn't get reopened, despite need_reopen.
Fixed by reopening need_reopen tables under LOCK TABLE.
PREBUILT->TABLE->N_MYSQL_HANDLES_OPENED == 1
ANALYSIS:
=========
Adding unique index to a InnoDB table which is locked as
mutliple instances may trigger an InnoDB assert.
When we add a primary key or an unique index, we need to
drop the original table and rebuild all indexes. InnoDB
expects that only the instance of the table that is being
rebuilt, is open during the process. In the current
scenario we have opened multiple instances of the table.
This triggers an assert during table rebuild.
'Locked_tables_list' encapsulates a list of all
instances of tables locked by LOCK TABLES statement.
FIX:
===
We are now temporarily closing all the instances of the
table except the one which is being altered and later
reopen them via Locked_tables_list::reopen_tables().
remove HA_EXTRA_PREPARE_FOR_RENAME - neither OPTIMIZE nor REPAIR need it
(was introduced in b58e79566c when replacing remove_table_from_cache()
with wait_while_table_is_used() even though remove_table_from_cache()
did not have it).
Reexecution of prepared "ANALYZE TABLE merge_table, table" may miss to
reinitialize "table" for subsequent execution and trigger assertion failure.
This happens because MERGE engine may adjust table->next_global chain, which
gets cleared by close_thread_tables()/ha_myisammrg::detach_children() later.
Since reinitilization iterates next_global chain, it won't see tables following
merge table.
Fixed by appending saved next_global chain after merge children.
DOING BAD DDL IN PREPARED STATEMENT
Analysis
========
A repeat execution of the prepared statement 'ALTER TABLE v1
CHECK PARTITION' where v1 is a view leads to server exit.
ALTER TABLE ... CHECK PARTITION is not applicable for views
and check for the same check is missing. This leads to
further execution and creation of derived table for the view
(Allocated under temp_table mem_root). Any reference to open
view or related pointers from second execution leads to
server exit as the same was freed at previous execution closure.
Fix:
======
Added check for view in mysql_admin_table() on PARTITION
operation. This will prevent mysql_admin_table() from
going ahead and creating temp table and related issues.
Changed message on admin table view operation error to
be more appropriate.
on REPAIR don't do table-specific stuff for views
(because even if the view has a temp table opened for it,
it's not opened all the way down the engine. In particular,
Aria crashes in maria_status() because MARIA_HA* info - that is
table->table->file->file - is NULL)
The hangs occur when the group_commit_orderer object is freed before the last
mark_start_commit() call on it - this loses the wakeup to other waiting worker
threads, causing them to hang until killed manually.
The object was freed because wakeup_subsequent_commits() was called two early
in two places. For MDEV-7888, during ANALYZE TABLE, and for MDEV-7929 during
record_gtid() after processing a DDL event. The group_commit_orderer object
can be freed when its last transaction has called wait_for_prior_commit().
Fix by implementing a suspend/resume mechanism for wakeup_subsequent_commits()
that can be used in places where a transaction is committed without this being
the commit of the actual replication event group.
Also add a protection mechanism (that asserts in debug builds) which can
prevent the too-early free and hang if other similar bugs should remain in
other parts of the code.
The reason for the failure was a bug in an include file on debian that causes 'struct stat'
to have different sized depending on the environment.
This patch fixes so that we always include my_global.h or my_config.h before we include any other files.
Other things:
- Removed #include <my_global.h> in some include files; Better to always do this at the top level to have as few
"always-include-this-file-first' files as possible.
- Removed usage of some include files that where already included by my_global.h or by other files.
client/mysql_plugin.c:
Use my_global.h first
client/mysqlslap.c:
Remove duplicated include files
extra/comp_err.c:
Remove duplicated include files
include/m_string.h:
Remove duplicated include files
include/maria.h:
Remove duplicated include files
libmysqld/emb_qcache.cc:
Use my_global.h first
plugin/semisync/semisync.h:
Use my_pthread.h first
sql/datadict.cc:
Use my_global.h first
sql/debug_sync.cc:
Use my_global.h first
sql/derror.cc:
Use my_global.h first
sql/des_key_file.cc:
Use my_global.h first
sql/discover.cc:
Use my_global.h first
sql/event_data_objects.cc:
Use my_global.h first
sql/event_db_repository.cc:
Use my_global.h first
sql/event_parse_data.cc:
Use my_global.h first
sql/event_queue.cc:
Use my_global.h first
sql/event_scheduler.cc:
Use my_global.h first
sql/events.cc:
Use my_global.h first
sql/field.cc:
Use my_global.h first
Remove duplicated include files
sql/field_conv.cc:
Use my_global.h first
sql/filesort.cc:
Use my_global.h first
Remove duplicated include files
sql/gstream.cc:
Use my_global.h first
sql/ha_ndbcluster.cc:
Use my_global.h first
sql/ha_ndbcluster_binlog.cc:
Use my_global.h first
sql/ha_ndbcluster_cond.cc:
Use my_global.h first
sql/ha_partition.cc:
Use my_global.h first
sql/handler.cc:
Use my_global.h first
sql/hash_filo.cc:
Use my_global.h first
sql/hostname.cc:
Use my_global.h first
sql/init.cc:
Use my_global.h first
sql/item.cc:
Use my_global.h first
sql/item_buff.cc:
Use my_global.h first
sql/item_cmpfunc.cc:
Use my_global.h first
sql/item_create.cc:
Use my_global.h first
sql/item_geofunc.cc:
Use my_global.h first
sql/item_inetfunc.cc:
Use my_global.h first
sql/item_row.cc:
Use my_global.h first
sql/item_strfunc.cc:
Use my_global.h first
sql/item_subselect.cc:
Use my_global.h first
sql/item_sum.cc:
Use my_global.h first
sql/item_timefunc.cc:
Use my_global.h first
sql/item_xmlfunc.cc:
Use my_global.h first
sql/key.cc:
Use my_global.h first
sql/lock.cc:
Use my_global.h first
sql/log.cc:
Use my_global.h first
sql/log_event.cc:
Use my_global.h first
sql/log_event_old.cc:
Use my_global.h first
sql/mf_iocache.cc:
Use my_global.h first
sql/mysql_install_db.cc:
Remove duplicated include files
sql/mysqld.cc:
Remove duplicated include files
sql/net_serv.cc:
Remove duplicated include files
sql/opt_range.cc:
Use my_global.h first
sql/opt_subselect.cc:
Use my_global.h first
sql/opt_sum.cc:
Use my_global.h first
sql/parse_file.cc:
Use my_global.h first
sql/partition_info.cc:
Use my_global.h first
sql/procedure.cc:
Use my_global.h first
sql/protocol.cc:
Use my_global.h first
sql/records.cc:
Use my_global.h first
sql/records.h:
Don't include my_global.h
Better to do this at the upper level
sql/repl_failsafe.cc:
Use my_global.h first
sql/rpl_filter.cc:
Use my_global.h first
sql/rpl_gtid.cc:
Use my_global.h first
sql/rpl_handler.cc:
Use my_global.h first
sql/rpl_injector.cc:
Use my_global.h first
sql/rpl_record.cc:
Use my_global.h first
sql/rpl_record_old.cc:
Use my_global.h first
sql/rpl_reporting.cc:
Use my_global.h first
sql/rpl_rli.cc:
Use my_global.h first
sql/rpl_tblmap.cc:
Use my_global.h first
sql/rpl_utility.cc:
Use my_global.h first
sql/set_var.cc:
Added comment
sql/slave.cc:
Use my_global.h first
sql/sp.cc:
Use my_global.h first
sql/sp_cache.cc:
Use my_global.h first
sql/sp_head.cc:
Use my_global.h first
sql/sp_pcontext.cc:
Use my_global.h first
sql/sp_rcontext.cc:
Use my_global.h first
sql/spatial.cc:
Use my_global.h first
sql/sql_acl.cc:
Use my_global.h first
sql/sql_admin.cc:
Use my_global.h first
sql/sql_analyse.cc:
Use my_global.h first
sql/sql_audit.cc:
Use my_global.h first
sql/sql_base.cc:
Use my_global.h first
sql/sql_binlog.cc:
Use my_global.h first
sql/sql_bootstrap.cc:
Use my_global.h first
Use my_global.h first
sql/sql_cache.cc:
Use my_global.h first
sql/sql_class.cc:
Use my_global.h first
sql/sql_client.cc:
Use my_global.h first
sql/sql_connect.cc:
Use my_global.h first
sql/sql_crypt.cc:
Use my_global.h first
sql/sql_cursor.cc:
Use my_global.h first
sql/sql_db.cc:
Use my_global.h first
sql/sql_delete.cc:
Use my_global.h first
sql/sql_derived.cc:
Use my_global.h first
sql/sql_do.cc:
Use my_global.h first
sql/sql_error.cc:
Use my_global.h first
sql/sql_explain.cc:
Use my_global.h first
sql/sql_expression_cache.cc:
Use my_global.h first
sql/sql_handler.cc:
Use my_global.h first
sql/sql_help.cc:
Use my_global.h first
sql/sql_insert.cc:
Use my_global.h first
sql/sql_lex.cc:
Use my_global.h first
sql/sql_load.cc:
Use my_global.h first
sql/sql_locale.cc:
Use my_global.h first
sql/sql_manager.cc:
Use my_global.h first
sql/sql_parse.cc:
Use my_global.h first
sql/sql_partition.cc:
Use my_global.h first
sql/sql_plugin.cc:
Added comment
sql/sql_prepare.cc:
Use my_global.h first
sql/sql_priv.h:
Added error if we use this before including my_global.h
This check is here becasue so many files includes sql_priv.h first.
sql/sql_profile.cc:
Use my_global.h first
sql/sql_reload.cc:
Use my_global.h first
sql/sql_rename.cc:
Use my_global.h first
sql/sql_repl.cc:
Use my_global.h first
sql/sql_select.cc:
Use my_global.h first
sql/sql_servers.cc:
Use my_global.h first
sql/sql_show.cc:
Added comment
sql/sql_signal.cc:
Use my_global.h first
sql/sql_statistics.cc:
Use my_global.h first
sql/sql_table.cc:
Use my_global.h first
sql/sql_tablespace.cc:
Use my_global.h first
sql/sql_test.cc:
Use my_global.h first
sql/sql_time.cc:
Use my_global.h first
sql/sql_trigger.cc:
Use my_global.h first
sql/sql_udf.cc:
Use my_global.h first
sql/sql_union.cc:
Use my_global.h first
sql/sql_update.cc:
Use my_global.h first
sql/sql_view.cc:
Use my_global.h first
sql/sys_vars.cc:
Added comment
sql/table.cc:
Use my_global.h first
sql/thr_malloc.cc:
Use my_global.h first
sql/transaction.cc:
Use my_global.h first
sql/uniques.cc:
Use my_global.h first
sql/unireg.cc:
Use my_global.h first
sql/unireg.h:
Removed inclusion of my_global.h
storage/archive/ha_archive.cc:
Added comment
storage/blackhole/ha_blackhole.cc:
Use my_global.h first
storage/csv/ha_tina.cc:
Use my_global.h first
storage/csv/transparent_file.cc:
Use my_global.h first
storage/federated/ha_federated.cc:
Use my_global.h first
storage/federatedx/federatedx_io.cc:
Use my_global.h first
storage/federatedx/federatedx_io_mysql.cc:
Use my_global.h first
storage/federatedx/federatedx_io_null.cc:
Use my_global.h first
storage/federatedx/federatedx_txn.cc:
Use my_global.h first
storage/heap/ha_heap.cc:
Use my_global.h first
storage/innobase/handler/handler0alter.cc:
Use my_global.h first
storage/maria/ha_maria.cc:
Use my_global.h first
storage/maria/unittest/ma_maria_log_cleanup.c:
Remove duplicated include files
storage/maria/unittest/test_file.c:
Added comment
storage/myisam/ha_myisam.cc:
Move sql_plugin.h first as this includes my_global.h
storage/myisammrg/ha_myisammrg.cc:
Use my_global.h first
storage/oqgraph/oqgraph_thunk.cc:
Use my_config.h and my_global.h first
One could not include my_global.h before oqgraph_thunk.h (don't know why)
storage/spider/ha_spider.cc:
Use my_global.h first
storage/spider/hs_client/config.cpp:
Use my_global.h first
storage/spider/hs_client/escape.cpp:
Use my_global.h first
storage/spider/hs_client/fatal.cpp:
Use my_global.h first
storage/spider/hs_client/hstcpcli.cpp:
Use my_global.h first
storage/spider/hs_client/socket.cpp:
Use my_global.h first
storage/spider/hs_client/string_util.cpp:
Use my_global.h first
storage/spider/spd_conn.cc:
Use my_global.h first
storage/spider/spd_copy_tables.cc:
Use my_global.h first
storage/spider/spd_db_conn.cc:
Use my_global.h first
storage/spider/spd_db_handlersocket.cc:
Use my_global.h first
storage/spider/spd_db_mysql.cc:
Use my_global.h first
storage/spider/spd_db_oracle.cc:
Use my_global.h first
storage/spider/spd_direct_sql.cc:
Use my_global.h first
storage/spider/spd_i_s.cc:
Use my_global.h first
storage/spider/spd_malloc.cc:
Use my_global.h first
storage/spider/spd_param.cc:
Use my_global.h first
storage/spider/spd_ping_table.cc:
Use my_global.h first
storage/spider/spd_sys_table.cc:
Use my_global.h first
storage/spider/spd_table.cc:
Use my_global.h first
storage/spider/spd_trx.cc:
Use my_global.h first
storage/xtradb/handler/handler0alter.cc:
Use my_global.h first
storage/xtradb/handler/i_s.cc:
Use my_global.h first
replication causing replication to fail.
In parallel replication, we run transactions from the master in parallel, but
force them to commit in the same order they did on the master. If we force T1
to commit before T2, but T2 holds eg. a row lock that is needed by T1, we get
a deadlock when T2 waits until T1 has committed.
Usually, we do not run T1 and T2 in parallel if there is a chance that they
can have conflicting locks like this, but there are certain edge cases where
it can occasionally happen (eg. MDEV-5914, MDEV-5941, MDEV-6020). The bug was
that this would cause replication to hang, eventually getting a lock timeout
and causing the slave to stop with error.
With this patch, InnoDB will report back to the upper layer whenever a
transactions T1 is about to do a lock wait on T2. If T1 and T2 are parallel
replication transactions, and T2 needs to commit later than T1, we can thus
detect the deadlock; we then kill T2, setting a flag that causes it to catch
the kill and convert it to a deadlock error; this error will then cause T2 to
roll back and release its locks (so that T1 can commit), and later T2 will be
re-tried and eventually also committed.
The kill happens asynchroneously in a slave background thread; this is
necessary, as the reporting from InnoDB about lock waits happen deep inside
the locking code, at a point where it is not possible to directly call
THD::awake() due to mutexes held.
Deadlock is assumed to be (very) rarely occuring, so this patch tries to
minimise the performance impact on the normal case where no deadlocks occur,
rather than optimise the handling of the occasional deadlock.
Also fix transaction retry due to deadlock when it happens after a transaction
already signalled to later transactions that it started to commit. In this
case we need to undo this signalling (and later redo it when we commit again
during retry), so following transactions will not start too early.
Also add a missing thd->send_kill_message() that got triggered during testing
(this corrects an incorrect fix for MySQL Bug#58933).
- Table locks now ends with state "After table lock"
- Open table now ends with state "After opening tables"
- All calls to close_thread_tables(), not only from mysql_execute_command(), has state "closing tables"
- Added state "executing" for mysql admin commands, like CACHE INDEX, REPAIR TABLE etc.
- Added state "Finding key cache" for CACHE INDEX
- Added state "Filling schema table" when we generate temporary table for SHOW commands and information schema.
Other things:
Add limit from innobase for thread_sleep_delay. This fixed a failing tests case.
Added db.opt to support-files to make 'make package' work
mysql-test/suite/funcs_1/datadict/processlist_val.inc:
Use new state
mysql-test/suite/funcs_1/r/processlist_priv_no_prot.result:
Updated test result because of new state
mysql-test/suite/funcs_1/r/processlist_val_no_prot.result:
Updated test result because of new state
sql/CMakeLists.txt:
Have option files in support-files
sql/lock.cc:
Added new state 'After table lock'
sql/sql_admin.cc:
Added state "executing" and "Sending data" for mysql admin commands, like CACHE INDEX, REPAIR TABLE etc.
Added state "Finding key cache"
sql/sql_base.cc:
open tables now ends with state "After table lock", instead of NULL
sql/sql_parse.cc:
Moved state "closing tables" to close_thread_tables()
sql/sql_show.cc:
Added state "Filling schema table" when we generate temporary table for SHOW commands and information schema.
storage/xtradb/buf/buf0buf.c:
Removed compiler warning
storage/xtradb/handler/ha_innodb.cc:
Add limit from innobase for thread_sleep_delay. This fixed a failing tests case.
support-files/db.opt:
cmakes needs this to create data/test directory
This is port of fix for MySQL BUG#17647863.
revno: 5572
revision-id: jon.hauglid@oracle.com-20131030232243-b0pw98oy72uka2sj
committer: Jon Olav Hauglid <jon.hauglid@oracle.com>
timestamp: Thu 2013-10-31 00:22:43 +0100
message:
Bug#17647863: MYSQL DOES NOT COMPILE ON OSX 10.9 GM
Rename test() macro to MY_TEST() to avoid conflict with libc++.
mysql_upgrade --help now also prints out --default options and variable values.
mysql_upgrade now prints permission errors.
mysql_upgrade doesn't print some non essential info if --silent is used.
Added handler error message about incompatible versions
Fixed that mysqlbug and mysql_install_db have the executable flag set.
Removed executable flag for some non executable files.
Changed in mysql_install_db askmonty.org to mariadb.com.
Ensured that all client executables prints --default options the same way.
Allow REPAIR ... USE_FRM for old .frm files if the are still compatible.
Extended shown error for storage engine messages.
client/mysql.cc:
print_defaults() should be first (as in all other programs)
client/mysql_upgrade.c:
--help now also prints out --default options and variable values
Print out error if wrong permissions
Don't print info if --silent
client/mysqladmin.cc:
print_defaults() should be first (as in all other programs)
client/mysqlbinlog.cc:
Added print_defaults() to --help
client/mysqlcheck.c:
Added empty line in --help
client/mysqlimport.c:
Added empty line in --help
client/mysqlshow.c:
Made --help compatible
client/mysqlslap.c:
Made --help compatible
client/mysqltest.cc:
Added print_defaults() to --help
include/handler_ername.h:
Added handler error message
include/my_base.h:
Added handler error message
mysql-test/r/mysql_upgrade.result:
Updated results
mysql-test/r/repair.result:
Added test case for better error messages
mysql-test/std_data/host_old.MYD:
Added test case for better error messages
mysql-test/std_data/host_old.MYI:
Added test case for better error messages
mysql-test/std_data/host_old.frm:
Added test case for better error messages
mysql-test/t/repair.test:
Added test case for better error messages
mysys/my_handler_errors.h:
Added handler error message
scripts/CMakeLists.txt:
Fixed that mysqlbug and mysql_install_db have the executable flag set
scripts/mysql_install_db.sh:
askmonty.org -> mariadb.com
sql/ha_partition.cc:
Sometimes table_type() can be called for errors even if partition didn't manage to open any files
sql/handler.cc:
Write clear text for not handled, but defined error messages.
sql/share/errmsg-utf8.txt:
Extended shown error for storage engine messages
sql/sql_admin.cc:
Allow REPAIR ... USE_FRM for old .frm files if the are still compatible
storage/myisam/ha_myisam.cc:
Use new error message
STATUS OF ROLLBACKED TRANSACTION" and bug #17054007 - "TRANSACTION
IS NOT FULLY ROLLED BACK IN CASE OF INNODB DEADLOCK".
The problem in the first bug report was that although deadlock involving
metadata locks was reported using the same error code and message as InnoDB
deadlock it didn't rollback transaction like the latter. This caused
confusion to users as in some cases after ER_LOCK_DEADLOCK transaction
could have been restarted immediately and in some cases rollback was
required.
The problem in the second bug report was that although InnoDB deadlock
caused transaction rollback in all storage engines it didn't cause release
of metadata locks. So concurrent DDL on the tables used in transaction was
blocked until implicit or explicit COMMIT or ROLLBACK was issued in the
connection which got InnoDB deadlock.
The former issue has stemmed from the fact that when support for detection
and reporting metadata locks deadlocks was added we erroneously assumed
that InnoDB doesn't rollback transaction on deadlock but only last statement
(while this is what happens on InnoDB lock timeout actually) and so didn't
implement rollback of transactions on MDL deadlocks.
The latter issue was caused by the fact that rollback of transaction due
to deadlock is carried out by setting THD::transaction_rollback_request
flag at the point where deadlock is detected and performing rollback
inside of trans_rollback_stmt() call when this flag is set. And
trans_rollback_stmt() is not aware of MDL locks, so no MDL locks are
released.
This patch solves these two problems in the following way:
- In case when MDL deadlock is detect transaction rollback is requested
by setting THD::transaction_rollback_request flag.
- Code performing rollback of transaction if THD::transaction_rollback_request
is moved out from trans_rollback_stmt(). Now we handle rollback request
on the same level as we call trans_rollback_stmt() and release statement/
transaction MDL locks.
STATUS OF ROLLBACKED TRANSACTION" and bug #17054007 - "TRANSACTION
IS NOT FULLY ROLLED BACK IN CASE OF INNODB DEADLOCK".
The problem in the first bug report was that although deadlock involving
metadata locks was reported using the same error code and message as InnoDB
deadlock it didn't rollback transaction like the latter. This caused
confusion to users as in some cases after ER_LOCK_DEADLOCK transaction
could have been restarted immediately and in some cases rollback was
required.
The problem in the second bug report was that although InnoDB deadlock
caused transaction rollback in all storage engines it didn't cause release
of metadata locks. So concurrent DDL on the tables used in transaction was
blocked until implicit or explicit COMMIT or ROLLBACK was issued in the
connection which got InnoDB deadlock.
The former issue has stemmed from the fact that when support for detection
and reporting metadata locks deadlocks was added we erroneously assumed
that InnoDB doesn't rollback transaction on deadlock but only last statement
(while this is what happens on InnoDB lock timeout actually) and so didn't
implement rollback of transactions on MDL deadlocks.
The latter issue was caused by the fact that rollback of transaction due
to deadlock is carried out by setting THD::transaction_rollback_request
flag at the point where deadlock is detected and performing rollback
inside of trans_rollback_stmt() call when this flag is set. And
trans_rollback_stmt() is not aware of MDL locks, so no MDL locks are
released.
This patch solves these two problems in the following way:
- In case when MDL deadlock is detect transaction rollback is requested
by setting THD::transaction_rollback_request flag.
- Code performing rollback of transaction if THD::transaction_rollback_request
is moved out from trans_rollback_stmt(). Now we handle rollback request
on the same level as we call trans_rollback_stmt() and release statement/
transaction MDL locks.
Following variables do not require LOCK_open protection anymore:
- table_def_cache (renamed to tdc_hash) is protected by rw-lock
LOCK_tdc_hash;
- table_def_shutdown_in_progress doesn't need LOCK_open protection;
- last_table_id use atomics;
- TABLE_SHARE::ref_count (renamed to TABLE_SHARE::tdc.ref_count)
is protected by TABLE_SHARE::tdc.LOCK_table_share;
- TABLE_SHARE::next, ::prev (renamed to tdc.next and tdc.prev),
oldest_unused_share, end_of_unused_share are protected by
LOCK_unused_shares;
- TABLE_SHARE::m_flush_tickets (renamed to tdc.m_flush_tickets)
is protected by TABLE_SHARE::tdc.LOCK_table_share;
- refresh_version (renamed to tdc_version) use atomics.
includes:
* remove some remnants of "Bug#14521864: MYSQL 5.1 TO 5.5 BUGS PARTITIONING"
* introduce LOCK_share, now LOCK_ha_data is strictly for engines
* rea_create_table() always creates .par file (even in "frm-only" mode)
* fix a 5.6 bug, temp file leak on dummy ALTER TABLE
- Problem: mysql_admin_table() calls open_temporary_tables(). This
causes assertion failure, because mysql_execute_command() has
already called open_temporary_tables()
- Solution: call close_thread_tables() at the start of
mysql_admin_table(), like mysql-5.6 does
Fixed OPTIMIZE with innodb
include/my_sys.h:
Removed ATTRIBUTE_FORMAT() as it gave warnings for %'s
sql/log_event.cc:
Optimization:
use my_b_write() and my_b_write_byte() instead of my_b_printf()
use strmake() instead of my_snprintf()
sql/sql_admin.cc:
Fixed bug in admin_recreate_table()
Fixed OPTIMIZE with innodb
sql/sql_table.cc:
Indentation fixes
strings/my_vsnprintf.c:
Changed fprintf() to fputs()
- temporary tables now works
- mysql-system_tables updated to not use temporary tables
- PASSWORD() function fixed
- Support for STATS_AUTO_RECALC, STATS_PERSISTENT and STATS_SAMPLE_PAGES table options
