an ALL/ANY quantified subquery in HAVING.
The Item::split_sum_func2 method should not create Item_ref
for objects of any class derived from Item_subselect.
Item_substr's results are improperly stored in a temporary table due to
wrongly calculated max_length value for multi-byte charsets if two
arguments specified.
Any default value for a enum fields over UCS2 charsets was corrupted
when we put it into the frm file, as it had been overwritten by its
HEX representation.
To fix it now we save a copy of structure that represents the enum
type and when putting the default values we use this copy.
Fixed confusing error message from the storage engine when
it fails to open underlying table. The error message is issued
when a table is _opened_ (not when it is created).
statement that uses an aggregating IN subquery with
HAVING clause.
A wrong order of the call of split_sum_func2 for the HAVING
clause of the subquery and the transformation for the
subquery resulted in the creation of a andor structure
that could not be restored at an execution of the prepared
statement.
Removed changes to the Item_func_between::fix_length_and_dec() made in the fix for bug#16377
query_cache.result:
Corrected a test case after removing a fix for bug#16377
- Honor unsigned_flag in the corresponding functions
- Use compare_int_signed_unsigned()/compare_int_unsigned_signed() instead of explicit comparison in GREATEST() and LEAST()
VALUES() was considered a constant. This caused replacing
(or pre-calculating) it using uninitialized values before the actual
execution takes place.
Mark it as a non-constant (still not dependent of tables) to prevent
the pre-calculation.
Corrected test case after removal of fix for bug#16377
type_date.test:
Corrected test case after removal of fix for bug#16377
item_cmpfunc.cc:
Removed changes to the agg_cmp_type() made in the for bug#16377
1003: Incorrect table name
in multi-table DELETE the set of tables to delete from actually
references then tables in the other list, e.g:
DELETE alias_of_t1 FROM t1 alias_of_t1 WHERE ....
is a valid statement.
So we must turn off table name syntactical validity check for alias_of_t1
because it's not a table name (even if it looks like one).
In order to do that we add a special flag (TL_OPTION_ALIAS) to
disable the name checking for the aliases in multi-table DELETE.
Variable character_set_results can legally be NULL (for "no conversion.")
This could result in a NULL deref that crashed the server. Fixed.
(Although ran some additional precursory tests to see whether I could break
anything else, but no breakage so far.)
The problem was due to a prior fix for BUG 9676, which limited
the rows stored in a temporary table to the LIMIT clause. This
optimization is not applicable to non-group queries with aggregate
functions. The fix disables the optimization in this case.
The problem was that during DROP TEMPORARY TABLE we tried to acquire
the name lock, though temporary tables belongs to one connection, and
no race is possible.
The solution is to not use table name locking while executing
DROP TEMPORARY TABLE.
- Fix typo in Item_func_export_set::fix_length_and_dec() which caused character set aggregation to fail
- Remove default argument from last arg of agg_arg_charsets() function, to reduce potential errors
GROUP BY/DISTINCT pruning optimization must be done before ORDER BY
optimization because ORDER BY may be removed when GROUP BY/DISTINCT
sorts as a side effect, e.g. in
SELECT DISTINCT <non-key-col>,<pk> FROM t1
ORDER BY <non-key-col> DISTINCT
must be removed before ORDER BY as if done the other way around
it will remove both.
The problem was that the error handling was using a too-small buffer to
print the error message generated. We fix this by not using a buffer at
all, but by using fprintf() directly. There were also some problems with
the error handling in table dumping that was exposed by this fix that were
also corrected.
The crash was caused by invalid sequence of handler::** calls:
ha_smth->index_init();
ha_smth->index_next_same(); (2)
(2) is an invalid call as it was not preceeded by any 'scan setup' call
like index_first() or index_read(). The cause was that QUICK_SELECT::reset()
didn't "fully reset" the quick select- current QUICK_RANGE wasn't forgotten,
and quick select might attempt to continue reading the range, which would
result in the above mentioned invalid sequence of handler calls.
5.x versions are not affected by the bug - they already have the missing
"range=NULL" clause.
bug #18184 SELECT ... FOR UPDATE does not work..: New test case
ha_ndbcluster.h, ha_ndbcluster.cc, NdbConnection.hpp:
Fix for bug #21059 Server crashes on join query with large dataset with NDB tables: Releasing operation for each intermediate batch, before next call to trans->execute(NoCommit);
- if there are two character set definitions in the column declaration,
we replace the first one with the second one as we store both in the LEX->charset
slot. Add a separate slot to the LEX structure to store underscore charset.
- convert default values to the column charset of STRING, VARSTRING fields
if necessary as well.
Make the encryption functions MD5(), SHA1() and ENCRYPT() return binary results.
Make MAKE_SET() and EXPORT_SET() use the correct character set for their default separator strings.
didn't work as expected: collation_server was set not to xxx,
but to the default collation of character set "yyy".
With different argument order it worked as expected:
mysqld --character-set-server=yyy --collation-server=yyy
Fix:
initializate default_collation_name to 0
when processing --character-set-server
only if --collation-server has not been specified
in command line.
Treat queries with no FROM and aggregate functions as normal queries,
so the aggregate function get correctly calculated as if there is 1 row.
This means that they will be considered to have one row, so COUNT(*) will return
1 instead of 0. Other aggregates will behave in compatible manner.
time_format() claimed %H and %k would return at most two digits
(hours 0-23), but this coincided neither with actual behaviour
nor with docs. this is not visible in simple queries; forcing
a temp-table is probably the easiest way to see this. adjusted
the return-length appropriately; the alternative would be to
adjust the docs to say that behaviour for > 99 hours is undefined.
---
Bug#19844: time_format in Union truncates values
time_format() claimed %H and %k would return at most two digits
(hours 0-23), but this coincided neither with actual behaviour
nor with docs. this is not visible in simple queries; forcing
a temp-table is probably the easiest way to see this. adjusted
the return-length appropriately; the alternative would be to
adjust the docs to say that behaviour for > 99 hours is undefined.
privileges
This problem is 4.1 specific. It doesn't affect 4.0 and was fixed
in 5.x before.
Having any mysql user who is allowed to issue multi table update
statement and any column/table grants, allows this user to update
any table on a server (mysql grant tables are not exception).
check_grant() accepts number of tables (in table list) to be checked
in 5-th param. While checking grants for multi table update, number
of tables must be 1. It must never be 0 (actually we have
DBUG_ASSERT(number > 0) in 5.x in grant_check() function).
When processing aggregate functions all tables values are reset
to NULLs at the end of each group.
When doing that if there are no rows found for a group
the const tables must not be reset as they are not recalculated
by do_select()/sub_select() for each group.
When optimizing conditions like 'a = <some_val> OR a IS NULL' so that they're
united into a single condition on the key and checked together the server must
check which value is the NULL value in a correct way : not only using ->is_null
but also check if the expression doesn't depend on any tables referenced in the
current statement.
This additional check must be performed because that optimization takes place
before the actual execution of the statement, so if the field was initialized
to NULL from a previous statement the optimization would be applied incorrectly.
The problem was in that opt_sum_query() replaced MIN/MAX functions
with the corresponding constant found in a key, but due to imprecise
representation of float numbers, when evaluating the where clause,
this comparison failed.
When MIN/MAX optimization detects that all tables can be removed,
also remove all conjuncts in a where clause that refer to these
tables. As a result of this fix, these conditions are not evaluated
twice, and in the case of float number comparisons we do not discard
result rows due to imprecise float representation.
As a side-effect this fix also corrects an unnoticed problem in
bug 12882.
the old problem - mysqltest can't handle multiple connections in the
embedded server properly. So i disabled the test for the embedded mode
until mysqltest is fixed
LIKE craashed with a pattern having letters in the range 128..255
(e.g. A WITH ACUTE or C WITH CARON) because of wrong cast from
signed char to unsigned int.
for class Item_func_trim.
For 4.1 it caused wrong output for EXPLAIN EXTENDED commands
if expressions with the TRIM function of two arguments were used.
For 5.0 it caused an error message when trying to select
from a view with the TRIM function of two arguments.
This unexpected error message was due to the fact that the
print method for the class Item_func_trim was inherited from
the class Item_func. Yet the TRIM function does not take a list
of its arguments. Rather it takes the arguments in the form:
[{BOTH | LEADING | TRAILING} [remstr] FROM] str) |
[remstr FROM] str
do not look for client-specific commands while inside a multi-line comment.
we will allow multi-comments pretty much anywhere within SQL-statements,
but client-specific commands (help, use, print, ...) must be the first token
in the input.
* don't use join cache when the incoming data set is already ordered
for ORDER BY
This choice must be made because join cache will effectively
reverse the join order and the results will be sorted by the index
of the table that uses join cache.
may return a wrong result.
An Item_sum_hybrid object has the was_values flag which indicates whether any
values were added to the sum function. By default it is set to true and reset
to false on any no_rows_in_result() call. This method is called only in
return_zero_rows() function. An ALL/ANY subquery can be optimized by MIN/MAX
optimization. The was_values flag is used to indicate whether the subquery
has returned at least one row. This bug occurs because return_zero_rows() is
called only when we know that the select will return zero rows before
starting any scans but often such information is not known.
In the reported case the return_zero_rows() function is not called and
the was_values flag is not reset to false and yet the subquery return no rows
Item_func_not_all and Item_func_nop_all functions return a wrong
comparison result.
The end_send_group() function now calls no_rows_in_result() for each item
in the fields_list if there is no rows were found for the (sub)query.
The problem is that the author used the wrong function to send a warning to the
user about truncation of data. push_warning() takes a constant string and
push_warning_printf() takes a format and variable arguments to fill it.
Since the string we were complaining about contains percent characters, the
printf() code interprets the "%Y" et c. that the user sends. That's wrong, and
often causes a crash, especially if the date mentions seconds, "%s".
A alternate fix would be to use push_warning_printf(..., "%s", warn_buff) .
The ALL/ANY subqueries are the subject of MIN/MAX optimization. The matter
of this optimization is to embed MIN() or MAX() function into the subquery
in order to get only one row by which we can tell whether the expression
with ALL/ANY subquery is true or false.
But when it is applied to a subquery like 'select a_constant' the reported bug
occurs. As no tables are specified in the subquery the do_select() function
isn't called for the optimized subquery and thus no values have been added
to a MIN()/MAX() function and it returns NULL instead of a_constant.
This leads to a wrong query result.
For the subquery like 'select a_constant' there is no reason to apply
MIN/MAX optimization because the subquery anyway will return at most one row.
Thus the Item_maxmin_subselect class is more appropriate for handling such
subqueries.
The Item_in_subselect::single_value_transformer() function now checks
whether tables are specified for the subquery. If no then this subselect is
handled like a UNION using an Item_maxmin_subselect object.
To make MySQL compatible with some ODBC applications, you can find
the AUTO_INCREMENT value for the last inserted row with the following query:
SELECT * FROM tbl_name WHERE auto_col IS NULL.
This is done with a special code that replaces 'auto_col IS NULL' with
'auto_col = LAST_INSERT_ID'.
However this also resets the LAST_INSERT_ID to 0 as it uses it for a flag
so as to ensure that only the first SELECT ... WHERE auto_col IS NULL
after an INSERT has this special behaviour.
In order to avoid resetting the LAST_INSERT_ID a special flag is introduced
in the THD class. This flag is used to restrict the second and subsequent
SELECTs instead of LAST_INSERT_ID.
dropping/creating tables".
The bug could lead to a crash when multi-delete statements were
prepared and used with temporary tables.
The bug was caused by lack of clean-up of multi-delete tables before
re-execution of a prepared statement. In a statement like
DELETE t1 FROM t1, t2 WHERE ... the first table list (t1) is
moved to lex->auxilliary_table_list and excluded from lex->query_tables
or select_lex->tables. Thus it was unaccessible to reinit_stmt_before_use
and not cleaned up before re-execution of a prepared statement.
