Test was flakey on some machines and showed spurious
reds for races.
New-and-improved test makes do with fewer statements,
no mysqltest-variables, and no backticks. Should hope-
fully be more robust. Heck, it's debatable whether we
should have a test for this, anyway.
Bug#319 if while a non-transactional slave is replicating a transaction possible problem
It is impossible to roll back a mixed engines transaction when one of the engine is
non-transaction. In replication that fact is crucial because the slave can not safely
re-apply a transction that was interrupted with STOP SLAVE.
Fixed with making STOP SLAVE not be effective immediately in the case the current
group of replication events has modified a non-transaction table. In order for slave to leave
either the group needs finishing or the user issues KILL QUERY|CONNECTION slave_thread_id.
The issue happened to be two-fold.
The table map event was recorded into binlog having
an incorrect size when number of columns exceeded 251.
The Row-based event had incorrect recording and restoring m_width member within
the same as above conditions.
Fixed with correcting m_data_size and m_width.
LOAD_FILE
LOAD_FILE is not safe to replicate in STATEMENT mode, because it
depends on a file (which is loaded on master and may not exist in
slave(s)). This leads to scenarios on which the slave replicates the
statement with 'load_file' and it will try to load the file from local
file system. Given that the file may not exist in the slave filesystem
the operation will not succeed (probably returning NULL), causing
master and slave(s) to diverge. However, when using MIXED mode
replication, this can be made to work, if the statement including
LOAD_FILE is marked as unsafe, triggering a switch to ROW mode,
meaning that the contents of the file are written to binlog as row
events. Consequently, the contents from the file in the master will
reach the slave via the binlog.
This patch addresses this bug by marking the load_file function as
unsafe. When in mixed mode and when LOAD_FILE is issued, there will be
a switch to row mode. Furthermore, when in statement mode, the
LOAD_FILE will raise a warning that the statement is unsafe in that
mode.
The problem is that after disconnect, the DOPR TEMPORARY TABLE event didn't been
written into binlog. So after syncing with slave, the TEMPORARY table on slave
is not removed.
Waiting DROP TEMPORARY TABLE event to be written into binlog before sync slave with
master.
Compiling with debug and assigning an invalid directory to --slave-load-tmpdir
was crashing the slave due to the following assertion DBUG_ASSERT(! is_set() ||
can_overwrite_status). This assertion assumes that a thread can change its
state once (i.e. ok,error, etc) before aborting, cleaning/resuming or completing
its execution unless the overwrite flag (i.e. can_overwrite_status) is true.
The Append_block_log_event::do_apply_event which is responsible for creating
temporary file(s) was not cleaning the thread state. Thus a failure while
trying to create a file in an invalid temporary directory was causing the crash.
To fix the problem we check if the temporary directory is valid before starting
the SQL Thread and reset the thread state before creating a file in
Append_block_log_event::do_apply_event.
mysql.procs_priv table itself does not get replicated.
Inserting routine privilege record into mysql.procs_priv table
is triggered by creating function/procedure statements
according to current user's privileges.
Because the current user of SQL thread has GLOBAL_ACL,
which doesn't need any check mysql.procs_priv privilege
when create/alter/execute routines.
Corresponding GLOBAL_ACL privilege user
doesn't insert routine privilege record into
mysql.procs_priv when creating a routine.
Fixed by switching the current user of SQL thread to definer user if
the definer user exists on slave.
That populates procs_priv, otherwise to keep the SQL thread
user and procs_priv remains unchanged.
The problem is issued because we set wrong start position and stop position of query string into binlog.
That two values are stored as part of head info of query string.
When we parse binlog, we first get position values then get the query string according position values.
But seems that two values are not calculated correctly after the parse of Yacc.
We don't want to touch so much of yacc because it may influence other codes.
So just add one space after 'INTO' key word when parsing.
This can easily resolve the problem.
The method to purge binary log files produces different results in some platforms.
The reason is that the purge time is calculated based on table modified time and
that can't guarantee to purge master-bin.000002 in all platforms.(eg. windows)
Use a new way that sets the time to purge binlog file 1 second after the last
modified time of master-bin.000002.
That can be sure that the file is always deleted in any platform.
The method to purge binary log files produces different results in some platforms.
The reason is that the purge time is calculated based on table modified time and
that can't guarantee to purge master-bin.000002 in all platforms.(eg. windows)
Use a new way that sets the time to purge binlog file 1 second after the last modified time of master-bin.000002.
That can be sure that the file is always deleted in any platform.
When using mixed mode the record values stored inside the storage
engine differed from the ones computed from the row event. This
happened because the prepare_record function was calling
empty_record macro causing some don't care bits to be left set.
Replacing the empty_record plus explicitly setting defaults with
restore_record to restore the record default values fixes this.
slave.
In mixed mode, if we create a temporary table and do some update which switch to ROW format,
the format will keep in ROW format until the session ends or the table is dropped explicitly.
When the session ends, the temp table is dropped automaticly at cleanup time.
but it checks only current binlog format and so skip insertion of DROP TABLE instructions into binlog.
So the temp table can't be dropped correctly at slave.
Our solution is that when closing temp tables at cleanup time we check both binlog format and binlog mode,
and we could write DROP TABLE instructions into binlog if current binlog format is ROW but in MIX mode.
If secure-file-priv was set on slave, it became unable to execute
LOAD DATA INFILE statements sent from master using mixed or
statement-based replication.
This patch fixes the issue by ignoring this security restriction
and checking if the files are created and read by the slave in the
--slave-load-tmpdir while executing the SQL Thread.
The test case relies on binlog entries for assertion. The problem is that the
binlog does not get cleaned in pushbuild between tests, resulting in extra
entries in the result file, causing the test to fail.
This fix adds a reset master at the beginning of the test, so that we get a
clean binlog file.
Some errors that cause the slave SQL thread to stop are not shown in the
Slave_SQL_Error column of "SHOW SLAVE STATUS". Instead, the error is only
in the server's error log.
That makes it difficult to analyze the error for the user. One example of an error
that stops the slave but is not shown by "SHOW SLAVE STATUS" is when @@global.init_slave
is set incorrectly (e.g., it contains something that is not valid SQL).
Three failures were not correctly reported:
1 - Failures during slave thread initialization
2 - Failures while initializing the relay log position right after
starting the slave thread.
3 - Failures while processing queries passed through the init_slave
option.
This patch fixes the issues by reporting the errors through relay-info->report.
There is an inconsistency with DROP DATABASE IF EXISTS, DROP
TABLE IF EXISTS and DROP VIEW IF EXISTS: those are binlogged even
if the DB or TABLE does not exist, whereas DROP PROCEDURE IF
EXISTS does not. It would be nice or at least consistent if DROP
PROCEDURE/STATEMENT worked the same too.
Fixed DROP PROCEDURE|FUNCTION IF EXISTS by adding a call to
write_bin_log in mysql_execute_command. Checked also if all
documented "DROP (...) IF EXISTS" get binlogged. Left out DROP
SERVER IF EXISTS because it seems that it only gets binlogged when
using row event (see BUG#25705).
Path composition for the relay log file that is stored into the relay index
file was not correct for windows.
mysql-test language does not provide primitives for portable path composition.
Fixed with storing only the basename part of the external "fake" relay log into
the relay index file.
Safety of removal of the dirname part of the relaylog is provided by logics of
`setup_fake_relay_log' that places the fake file into @@datadir directory.
Documented behaviour was broken by the patch for bug 33699
that actually is not a bug.
This fix reverts patch for bug 33699 and reverts the
UPDATE of NOT NULL field with NULL query to old
behavior.
Fixing pb failures caused by mtr invokes the test with --tmpdir to which
there are sensitive operations in the test
and setup_fake_relay_log.inc also needed --secure-file-priv for its own separate
directory.
Fixed with removing SELECT INTO OUTFILE and deploying --exec echo instead in the marco.
The test's opt file should contain --secure-file-priv=$MYSQL_TEST_DIR as the test
operations deal with files located in $MYSQL_TEST_DIR.
The test fails with timeout when applying diff on two tables.
In this test case, there can be a situation when the slave is not yet synced
with the master, thence the changes may not be on the slave at diff time.
This patch addresses this issue by synchronizing master and slave before the
diff takes place.
Overriding a default value of --secure-file-priv on pb.mtr to be $MYSQLTEST_VARDIR which
makes pb's mtr happy to execute the regression test for the bug.
conflicts:
Text conflict in client/mysqltest.cc
Text conflict in mysql-test/include/wait_until_connected_again.inc
Text conflict in mysql-test/lib/mtr_report.pm
Text conflict in mysql-test/mysql-test-run.pl
Text conflict in mysql-test/r/events_bugs.result
Text conflict in mysql-test/r/log_state.result
Text conflict in mysql-test/r/myisam_data_pointer_size_func.result
Text conflict in mysql-test/r/mysqlcheck.result
Text conflict in mysql-test/r/query_cache.result
Text conflict in mysql-test/r/status.result
Text conflict in mysql-test/suite/binlog/r/binlog_index.result
Text conflict in mysql-test/suite/binlog/r/binlog_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_packet.result
Text conflict in mysql-test/suite/rpl/t/rpl_packet.test
Text conflict in mysql-test/t/disabled.def
Text conflict in mysql-test/t/events_bugs.test
Text conflict in mysql-test/t/log_state.test
Text conflict in mysql-test/t/myisam_data_pointer_size_func.test
Text conflict in mysql-test/t/mysqlcheck.test
Text conflict in mysql-test/t/query_cache.test
Text conflict in mysql-test/t/rpl_init_slave_func.test
Text conflict in mysql-test/t/status.test
It's a regression issue.
The reason of the bug appeared to be an error introduced into 5.1 source code.
A piece of code in Create_file_log_event::do_apply_event() did not have test
coverage which made make test and pb unaware.
Fixed with inverting the old value of the return value from
Create_file_log_event::do_apply_event().
The rpl test suite is extended with `rpl_cross_version' the file to hold
regression cases similar to the current.
clause server fires immediately after creating event and time between create and delete
event sometimes is enough for firing. So adding STARTS clause moves first execution in
future after drop of event
1. Added STARTS clause for CREATE EVENT.
2. Updated result file.
Problem 1: The test waits for an error in the slave sql thread,
then resolves the error and issues 'start slave'. However, there
is a gap between when the error is reported and the slave sql
thread stops. If this gap was long, the slave would still be
running when 'start slave' happened, so 'start slave' would fail
and cause a test failure.
Fix 1: Made wait_for_slave_sql_error wait for the slave to stop
instead of wait for error in the IO thread. After stopping, the
error code is verified. If the error code is wrong, debug info
is printed. To print debug info, the debug printing code in
wait_for_slave_param.inc was moved out to a new file,
show_rpl_debug_info.inc.
Problem 2: rpl_stm_mystery22 is a horrible name, the comments in
the file didn't explain anything useful, the test was generally
hard to follow, and the test was essentially duplicated between
rpl_stm_mystery22 and rpl_row_mystery22.
Fix 2: The test is about conflicts in the slave SQL thread,
hence I renamed the tests to rpl_{stm,row}_conflicts. Refactored
the test so that the work is done in
extra/rpl_tests/rpl_conflicts.inc, and
rpl.rpl_{row,stm}_conflicts merely sets some variables and then
sourced extra/rpl_tests/rpl_conflicts.inc.
The tests have been rewritten and comments added.
Problem 3: When calling wait_for_slave_sql_error.inc, you always
want to verify that the sql thread stops because of the expected
error and not because of some other error. Currently,
wait_for_slave_sql_error.inc allows the caller to omit the error
code, in which case all error codes are accepted.
Fix 3: Made wait_for_slave_sql_error.inc fail if no error code
is given. Updated rpl_filter_tables_not_exist accordingly.
Problem 4: rpl_filter_tables_not_exist had a typo, the dollar
sign was missing in a 'let' statement.
Fix 4: Added dollar sign.
Problem 5: When replicating from other servers than the one named
'master', the wait_for_slave_* macros were unable to print debug
info on the master.
Fix 5: Replace parameter $slave_keep_connection by
$master_connection.
