Let us disable Valgrind on tests that would fail because a
server shutdown or a STOP SLAVE command would take longer,
causing the test harness to forcibly and silently kill the server
due to an exceeded timeout.
- While creating a new InnoDB segment, allocates the extent
before allocating the inode or page allocation even though
the pages are present in fragment segment. This patch does
reserve the extent when InnoDB ran out of fragment pages
in the tablespace.
PageConverter::update_header(): Remove an unnecessary write.
The field that was originally called FIL_PAGE_FILE_FLUSH_LSN only
made sense for the first page of the system tablespace
(initially, for the first page of each file of the system tablespace).
It never had any meaning for .ibd files, and it lost its original
meaning in MariaDB Server 10.8.1 when
commit b07920b634 (MDEV-27199)
removed the ability to start without ib_logfile0.
If the most significant 32 bits of the LSN are nonzero, this
unnecessary write would write the wrong encryption key identifier
to the page. The first page of any file is never encrypted,
so normally those bytes should be 0 for any .ibd file.
When "mariabackup --target-dir=$basedir --incremental-dir=$incremental_dir"
is running and is moving a new table file (e.g. `db1/t1.new`) from the
incremental directory to the base directory, it needs to verify that the base
backup database directory (e.g. `$basedir/db1`) really exists
(or create it otherwise).
The table `db1/t1` can come from a new database `db1` which
was created during the base mariabackup execution time.
In such case the directory `db1` exists only in the incremental directory,
but does not exist in the base directory.
mariabackup does not load dictionary during backup, but it loads
tablespaces, that is why fil_system.max_assigned_id is not set with
dict_check_tablespaces_and_store_max_id(). There is no sense to issue the
warning during backup.
The InnoDB DATA DIRECTORY attribute is not implemented via
symbolic links but something similar, *.isl files that contain
the names of data files.
InnoDB failed to ignore the DATA DIRECTORY attribute even though
the server was started with --skip-symbolic-links.
Native ALTER TABLE in InnoDB will retain the DATA DIRECTORY attribute
of the table, no matter if the table will be rebuilt or not.
Generic ALTER TABLE (with ALGORITHM=COPY) as well as TRUNCATE TABLE
will discard the DATA DIRECTORY attribute.
All tests have been run with and without the ./mtr option
--mysqld=--skip-symbolic-links
and some tests that use the InnoDB DATA DIRECTORY attribute
have been adjusted for this.
During the prepare phase of restoring backups, "mariabackup" does
not seem to allow (or recognize) the option "innodb_force_recovery"
for the embedded InnoDB server instance that it starts.
If page corruption observed during page recovery, the prepare step
fails. While this is indeed the correct behavior ideally, allowing
this option to be set in case of emergencies might be useful when
the current backup is the only copy available. Some error messages
during "--prepare" suggest to set "innodb_force_recovery" to 1:
[ERROR] InnoDB: Set innodb_force_recovery=1 to ignore corruption.
For backwards compatibility, "mariabackup --innobackupex --apply-log"
should also have this option.
Signed-off-by: Srinidhi Kaushik <shrinidhi.kaushik@gmail.com>
The new option --log-innodb-page-corruption is introduced.
When this option is set, backup is not interrupted if innodb corrupted
page is detected. Instead it logs all found corrupted pages in
innodb_corrupted_pages file in backup directory and finishes with error.
For incremental backup corrupted pages are also copied to .delta file,
because we can't do LSN check for such pages during backup,
innodb_corrupted_pages will also be created in incremental backup
directory.
During --prepare, corrupted pages list is read from the file just after
redo log is applied, and each page from the list is checked if it is allocated
in it's tablespace or not. If it is not allocated, then it is zeroed out,
flushed to the tablespace and removed from the list. If all pages are removed
from the list, then --prepare is finished successfully and
innodb_corrupted_pages file is removed from backup directory. Otherwise
--prepare is finished with error message and innodb_corrupted_pages contains
the list of the pages, which are detected as corrupted during backup, and are
allocated in their tablespaces, what means backup directory contains corrupted
innodb pages, and backup can not be considered as consistent.
For incremental --prepare corrupted pages from .delta files are applied
to the base backup, innodb_corrupted_pages is read from both base in
incremental directories, and the same action is proceded for corrupted
pages list as for full --prepare. innodb_corrupted_pages file is
modified or removed only in base directory.
If DDL happens during backup, it is also processed at the end of backup
to have correct tablespace names in innodb_corrupted_pages.
mariabackup deallocated uninitialized
write_filt_ctxt.u.wf_incremental_ctxt in xtrabackup_copy_datafile() when
some table should be skipped due to parsed DDL redo log record.
MariaDB 10.2.2 inherited from MySQL 5.7 a perceived optimization
of ALTER TABLE, which skips the writing of redo log records.
In MDEV-16809 we introduced a parameter that allows the redo log to
be written, so that Mariabackup would not be impacted, but we kept
the MySQL 5.7 behaviour enabled by default (innodb_log_optimize_ddl=ON).
As noted in MDEV-19747 (Deprecate and ignore innodb_log_optimize_ddl,
implemented in MariaDB 10.5.1), omitting the redo log writes can
actually reduce performance, because we will have to wait for the data
pages to be written out. When the redo log file is configured to be
large enough, it actually can be much faster to write the redo log and
avoid the extra page flushing.
When the redo log is omitted (innodb_log_optimize_ddl=ON), also
Mariabackup may have to perform a lot of extra work, to re-copy the
entire data file if it is possible that any log was omitted during
the backup.
Starting with MariaDB 10.5.1, the parameter innodb_log_optimize_ddl
is deprecated and ignored. We hereby deprecate (but will not ignore)
the parameter in earlier versions as well.
The problem:
When incremental backup is taken, delta files are created for innodb tables
which are marked as new tables during innodb ddl tracking. When such
tablespace is tried to be opened during prepare in
xb_delta_open_matching_space(), it is "created", i.e.
xb_space_create_file() is invoked, instead of opening, even if
a tablespace with the same name exists in the base backup directory.
xb_space_create_file() writes page 0 header the tablespace.
This header does not contain crypt data, as mariabackup does not have
any information about crypt data in delta file metadata for
tablespaces.
After delta file is applied, recovery process is started. As the
sequence of recovery for different pages is not defined, there can be
the situation when crypt data redo log event is executed after some
other page is read for recovery. When some page is read for recovery, it's
decrypted using crypt data stored in tablespace header in page 0, if
there is no crypt data, the page is not decryped and does not pass corruption
test.
This causes error for incremental backup --prepare for encrypted
tablespaces.
The error is not stable because crypt data redo log event updates crypt
data on page 0, and recovery for different pages can be executed in
undefined order.
The fix:
When delta file is created, the corresponding write filter copies only
the pages which LSN is greater then some incremental LSN. When new file
is created during incremental backup, the LSN of all it's pages must be
greater then incremental LSN, so there is no need to create delta for
such table, we can just copy it completely.
The fix is to copy the whole file which was tracked during incremental backup
with innodb ddl tracker, and copy it to base directory during --prepare
instead of delta applying.
There is also DBUG_EXECUTE_IF() in innodb code to avoid writing redo log
record for crypt data updating on page 0 to make the test case stable.
Note:
The issue is not reproducible in 10.5 as optimized DDL's are deprecated
in 10.5. But the fix is still useful because it allows to decrease
data copy size during backup, as delta file contains some extra info.
The test case should be removed for 10.5 as it will always pass.
log_group_read_log_seg() returns error when:
1) Calculated log block number does not correspond to read log block
number. This can be caused by:
a) Garbage or an incompletely written log block. We can exclude this
case by checking log block checksum if it's enabled(see innodb-log-checksums,
encrypted log block contains checksum always).
b) The log block is overwritten. In this case checksum will be correct and
read log block number will be greater then requested one.
2) When log block length is wrong. In this case recv_sys->found_corrupt_log
is set.
3) When redo log block checksum is wrong. In this case innodb code
writes messages to error log with the following prefix: "Invalid log
block checksum."
The fix processes all the cases above.
Parse SHOW SLAVE STATUS output for the "Using_Gtid" column. If the value
is "No", then old log file and position is backed up, otherwise gtid_slave_pos
is backed up.
- Problem is that test case creates iblogfile* files. So existing
ibdata pages could point to future LSN. Fix is that taking the
backup of data before iblogfile* creation and apply it before
exiting the test case.
mariabackup tries to allocate a buffer of page_size*page_size/4 size.
for 64k page it means 1Gb, which doesn't work very well on 32-bit builders.
Skip the 64k page test on 32bit.
lock
--ftwrl-wait-timeout does not finish mariabackup execution when acquired
backup lock can't be grabbed for the certain amount of time, it just
waits for a long queries finishing before acquiring the lock to avoid
unnecessary locking.
This commit extends --ftwrl-wait-timeout so, that mariabackup execution
is finished if it waits for backup lock during certain amount of time.
config.
The solution is to read the system variable value on startup and to fill
databases_exclude_hash.
xb_load_list_string() became non-static and was reformatted. The system
variable value is read and processed in get_mysql_vars(), which was also
reformatted.
was restored.
Optionally rollback prepared XA's on "mariabackup --prepare".
The fix MUST NOT be ported on 10.5+, as MDEV-742 fix solves the issue for
slaves.
copy thread)
mariabackup hangs waiting until innodb redo log thread read log till certain
LSN, and it waits under FTWRL. If there is redo log read error in the thread,
it is finished, and main thread knows nothing about it, what leads to hanging.
As it hangs under FTWRL, slave threads on server side can be blocked due
to MDL lock conflict.
The fix is to finish mariabackup with error message on innodb redo log read
failure.
executing undo undo_key_delete" upon startup on datadir restored from
incremental backup
aria_log* files were not copied on --prepare --incremental-dir step from
incremental to destination backup directory.
