1) BUG#43309 - Test main.innodb can't be run twice
2) Follow up fix for BUG#43309, adds explanatory comments.
Detailed revision comments:
r4575 | vasil | 2009-03-30 15:55:31 +0300 (Mon, 30 Mar 2009) | 8 lines
branches/5.1:
Fix Bug#43309 Test main.innodb can't be run twice
Make the innodb mysql-test more flexible by inspecting how much a
variable of interest has changed since the start of the test. Do not
assume the variables have zero values at the start of the test.
r4659 | vasil | 2009-04-06 15:34:51 +0300 (Mon, 06 Apr 2009) | 6 lines
branches/5.1:
Followup to r4575 and the fix of Bug#43309 Test main.innodb can't be run twice:
Add an explanatory comment, as suggested by Patrick Crews in the bug report.
problems
1) BUG#39320 - innodb crash in file btr/btr0pcur.c line 217 with
innodb_locks_unsafe_for_binlog
2) Fixes bug in multi-table semi consistent reads.
3) Fixes email address from dev@innodb.com to innodb_dev_ww@oracle.com
4) Fixes warning message generated by main.innodb test
Detailed revision comments:
r4399 | marko | 2009-03-12 09:38:05 +0200 (Thu, 12 Mar 2009) | 5 lines
branches/5.1: row_sel_get_clust_rec_for_mysql(): Store the cursor position
also for unlock_row(). (Bug #39320)
rb://96 approved by Heikki Tuuri.
r4400 | marko | 2009-03-12 10:06:44 +0200 (Thu, 12 Mar 2009) | 8 lines
branches/5.1: Fix a bug in multi-table semi-consistent reads.
Remember the acquired record locks per table handle (row_prebuilt_t)
rather than per transaction (trx_t), so that unlock_row should successfully
unlock all non-matching rows in multi-table operations.
This deficiency was found while investigating Bug #39320.
rb://94 approved by Heikki Tuuri.
r4481 | marko | 2009-03-19 15:01:48 +0200 (Thu, 19 Mar 2009) | 6 lines
branches/5.1: row_unlock_for_mysql(): Do not unlock records that were
modified by the current transaction. This bug was introduced or unmasked
in r4400.
rb://97 approved by Heikki Tuuri
r4573 | vasil | 2009-03-30 14:17:13 +0300 (Mon, 30 Mar 2009) | 4 lines
branches/5.1:
Fix email address from dev@innodb.com to innodb_dev_ww@oracle.com
r4574 | vasil | 2009-03-30 14:27:08 +0300 (Mon, 30 Mar 2009) | 38 lines
branches/5.1:
Restore the state of INNODB_THREAD_CONCURRENCY to silence this warning:
TEST RESULT TIME (ms)
------------------------------------------------------------
worker[1] Using MTR_BUILD_THREAD 250, with reserved ports 12500..12509
main.innodb [ pass ] 8803
MTR's internal check of the test case 'main.innodb' failed.
This means that the test case does not preserve the state that existed
before the test case was executed. Most likely the test case did not
do a proper clean-up.
This is the diff of the states of the servers before and after the
test case was executed:
mysqltest: Logging to '/tmp/autotest.sh-20090330_033000-5.1.5Hg8CY/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.log'.
mysqltest: Results saved in '/tmp/autotest.sh-20090330_033000-5.1.5Hg8CY/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.result'.
mysqltest: Connecting to server localhost:12500 (socket /tmp/autotest.sh-20090330_033000-5.1.5Hg8CY/mysql-5.1/mysql-test/var/tmp/mysqld.1.sock) as 'root', connection 'default', attempt 0 ...
mysqltest: ... Connected.
mysqltest: Start processing test commands from './include/check-testcase.test' ...
mysqltest: ... Done processing test commands.
--- /tmp/autotest.sh-20090330_033000-5.1.5Hg8CY/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.result 2009-03-30 14:12:31.000000000 +0300
+++ /tmp/autotest.sh-20090330_033000-5.1.5Hg8CY/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.reject 2009-03-30 14:12:41.000000000 +0300
@@ -99,7 +99,7 @@
INNODB_SUPPORT_XA ON
INNODB_SYNC_SPIN_LOOPS 20
INNODB_TABLE_LOCKS ON
-INNODB_THREAD_CONCURRENCY 8
+INNODB_THREAD_CONCURRENCY 16
INNODB_THREAD_SLEEP_DELAY 10000
INSERT_ID 0
INTERACTIVE_TIMEOUT 28800
mysqltest: Result content mismatch
not ok
r4576 | vasil | 2009-03-30 16:25:10 +0300 (Mon, 30 Mar 2009) | 4 lines
branches/5.1:
Revert a change to Makefile.am that I committed accidentally in c4574.
mysql_rename_view can not rename view if database is not the same.
The fix is to add new argument 'new_db' to mysql_rename_view() and
allow rename with different databases
(only for ALTER DATABASE ... UPGRADE DATA DIRECTORY NAME).
comment can't be read back
A change to the lexer in 5.1 caused slash-asterisk-bang-version
sections to be terminated early if there exists a slash-asterisk-
style comment inside it. Nesting comments is usually illegal,
but we rely on versioned comment blocks in mysqldump, and the
contents of those sections must be allowed to have comments.
The problem was that when encountering open-comment tokens and
consuming -or- passing through the contents, the "in_comment"
state at the end was clobbered with the not-in-a-comment value,
regardless of whether we were in a comment before this or not.
So, """/*!VER one /* two */ three */""" would lose its in-comment
state between "two" and "three". Save the echo and in-comment
state, and restore it at the end of the comment if we consume a
comment.
routine does not exist
There is an inconsistency with DROP DATABASE IF EXISTS, DROP TABLE IF
EXISTS and DROP VIEW IF EXISTS: those are binlogged even if the DB or
TABLE does not exist, whereas DROP PROCEDURE IF EXISTS does not. It
would be nice or at least consistent if DROP PROCEDURE/STATEMENT
worked the same too.
Fixed DROP PROCEDURE|FUNCTION IF EXISTS by adding a call to
mysql_bin_log.write in mysql_execute_command. Checked also if all
documented "DROP (...) IF EXISTS" get binlogged.
NOTE: This is a 5.0 backport patch as requested by support.
The test started failing following the push for BUG#41541.
Some of the algorithms access bytes beyond the input data
and this can affect up to one byte less than "word size"
which is BITS_SAVED / 8.
Fixed by adding (BITS_SAVED / 8) -1 bytes to buffer size
(i.e. Memory Segment #2) to avoid accessing un-allocated data.
We didn't expect "error: no error", although this is
in fact a legitimate state (if something is erroneous
on the master, but not on the slave, e.g. INSERT fails
on master due to UNIQUE constraint which does not exist
on slave).
We now list the ignore for "0: no error" the same way
as any other ignore; moreover, if no or an empty
--slave-skip-errors is passed at start-up, we show
"OFF" instead of empty list, as intended. (The code
for that was there, but was only run for the empty-
argument case, even if it subsequently tested for
both conditions.)
The problem is that a SELECT .. FOR UPDATE statement might open
a table and later wait for a impeding global read lock without
noticing whether it is holding a table that is being waited upon
the the flush phase of the process that took the global read
lock.
The same problem also affected the following statements:
LOCK TABLES .. WRITE
UPDATE .. SET (update and multi-table update)
TRUNCATE TABLE ..
LOAD DATA ..
The solution is to make the above statements wait for a impending
global read lock before opening the tables. If there is no
impending global read lock, the statement raises a temporary
protection against global read locks and progresses smoothly
towards completion.
Important notice: the patch does not try to address all possible
cases, only those which are common and can be fixed unintrusively
enough for 5.0.
Altered the test to accommodate the new behavior of max_allowed_packet.
Had to disconnect / reconnect the default connection for the new value to register.
Re-enabled certain parts of the test that were commented out and added
some setup / cleanup code to ensure proper reset of max_allowed_packet at the end of the test.
Re-recorded the .result file to account for changes to the test.
Original commentary:
Bug #37348: Crash in or immediately after JOIN::make_sum_func_list
The optimizer pulls up aggregate functions which should be aggregated in
an outer select. At some point it may substitute such a function for a field
in the temporary table. The setup_copy_fields function doesn't take this
into account and may overrun the copy_field buffer.
Fixed by filtering out the fields referenced through the specialized
reference for aggregates (Item_aggregate_ref).
Added an assertion to make sure bugs that cause similar discrepancy
don't go undetected.
The problem is that XML functions(items) do not reset null_value
before their execution and further item excution may use
null_value value of the previous result.
The fix is to reset null_value.
on 5.0
The server crashes on an assert in net_end_statement indicating that the
Diagnostics area wasn't set properly during execution.
This happened on a multi table DELETE operation using the IGNORE keyword.
The keyword is suppose to allow for execution to continue on a best effort
despite some non-fatal errors. Instead execution stopped and no client
response was sent which would have led to a protocol error if it hadn't been
for the assert.
This patch corrects this issue by checking for the existence of an IGNORE
option before setting an error state during row-by-row delete iteration.
updates
Attempt to execute trigger or stored function with multi-UPDATE
which used - but didn't update - a table that was also used by
the calling statement led to an error. Read-only reference to
tables used in the calling statement should be allowed.
This problem was caused by the fact that check for conflicting
use of tables in SP/triggers was performed in open_tables(),
and in case of multi-UPDATE we didn't know exact lock type at
this stage.
We solve the problem by moving this check to lock_tables(), so
it can be performed after exact lock types for tables used by
multi-UPDATE are determined.
UNION could convert fixed-point FLOAT(M,D)/DOUBLE(M,D) columns
to FLOAT/DOUBLE when aggregating data types from the SELECT
substatements. While there is nothing particularly wrong with
this behavior, especially when M is greater than the hardware
precision limits, it could be confusing in cases when all
SELECT statements in a union have the same
FLOAT(M,D)/DOUBLE(M,D) columns with equal precision
specifications listed in the same position.
Since the manual is quite vague on what data type should be
returned in such cases, the bug was fixed by implementing the
most 'expected' behavior: do not convert FLOAT(M,D)/DOUBLE(M,D)
to anything else if all SELECT statements in a UNION have the
same precision for that column.
When the thread executing a DDL was killed after finished its
execution but before writing the binlog event, the error code in
the binlog event could be set wrongly to ER_SERVER_SHUTDOWN or
ER_QUERY_INTERRUPTED.
This patch fixed the problem by ignoring the kill status when
constructing the event for DDL statements.
This patch also included the following changes in order to
provide the test case.
1) modified mysqltest to support variable for connection command
2) modified mysql-test-run.pl, add new variable MYSQL_SLAVE to
run mysql client against the slave mysqld.
The problem is that the read and write methods of the shared
memory transport (protocol) didn't react to asynchornous close
events, which could lead to a lock up as the client would wait
(until time out) for a server response that will never come.
The solution is to also wait for close events while waiting
for I/O from or to the server.
Bug report and patch submitted by: Armin Schöffmann
