Conflicts
=========
Text conflict in .bzr-mysql/default.conf
Text conflict in libmysqld/CMakeLists.txt
Text conflict in libmysqld/Makefile.am
Text conflict in mysql-test/collections/default.experimental
Text conflict in mysql-test/extra/rpl_tests/rpl_row_sp006.test
Text conflict in mysql-test/suite/binlog/r/binlog_tmp_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata_fatal.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_create_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_sp006_InnoDB.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_log.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_sp006.result
Text conflict in mysql-test/t/mysqlbinlog.test
Text conflict in sql/CMakeLists.txt
Text conflict in sql/Makefile.am
Text conflict in sql/log_event_old.cc
Text conflict in sql/rpl_rli.cc
Text conflict in sql/slave.cc
Text conflict in sql/sql_binlog.cc
Text conflict in sql/sql_lex.h
21 conflicts encountered.
NOTE
====
mysql-5.1-rpl-merge has been made a mirror of mysql-next-mr:
- "mysql-5.1-rpl-merge$ bzr pull ../mysql-next-mr"
This is the first cset (merge/...) committed after pulling
from mysql-next-mr.
2630.39.1, 2630.28.29, 2630.34.3, 2630.34.2, 2630.34.1, 2630.29.29,
2630.29.28, 2630.31.1, 2630.28.13, 2630.28.10, 2617.23.14 and
some other minor revisions.
This patch implements:
WL#4264 "Backup: Stabilize Service Interface" -- all the
server prerequisites except si_objects.{h,cc} themselves (they can
be just copied over, when needed).
WL#4435: Support OUT-parameters in prepared statements.
(and all issues in the initial patches for these two
tasks, that were discovered in pushbuild and during testing).
Bug#39519: mysql_stmt_close() should flush all data
associated with the statement.
After execution of a prepared statement, send OUT parameters of the invoked
stored procedure, if any, to the client.
When using the binary protocol, send the parameters in an additional result
set over the wire. When using the text protocol, assign out parameters to
the user variables from the CALL(@var1, @var2, ...) specification.
The following refactoring has been made:
- Protocol::send_fields() was renamed to Protocol::send_result_set_metadata();
- A new Protocol::send_result_set_row() was introduced to incapsulate
common functionality for sending row data.
- Signature of Protocol::prepare_for_send() was changed: this operation
does not need a list of items, the number of items is fully sufficient.
The following backward incompatible changes have been made:
- CLIENT_MULTI_RESULTS is now enabled by default in the client;
- CLIENT_PS_MULTI_RESUTLS is now enabled by default in the client.
include/mysql.h:
Add a new flag to MYSQL_METHODS::flush_use_result
function pointer. This flag determines if all results
should be flushed or only the first one:
- if flush_all_results is TRUE, then cli_flush_use_result()
will read/flush all pending results. I.e. it will read
all packets while server status attribute indicates that
there are more results. This is a new semantic, required
to fix the bug.
- if flush_all_results is FALSE, the old sematic
is preserved -- i.e. cli_flush_use_result() reads data
until first EOF-packet.
include/mysql.h.pp:
Update the ABI with new calls (compatible changes).
include/mysql_com.h:
Add CLIENT_PS_OUT_PARAMS -- a client capability indicating that the client supportsю
libmysql/libmysql.c:
Add mysql_stmt_next_result() -- analogue of mysql_next_result() for binary protocol.
Fix a minor bug in alloc_fields() -- not all members were copied over,
and some only shallow-copied (catalog).
Flush all results in mysql_stmt_close() (Bug#39519).
libmysqld/lib_sql.cc:
Rename send_fields() -> send_result_set_metadata().
Refactoring: change prepare_for_send() so that it accepts only
what it really needs -- a number of elements in the list.
mysql-test/r/ps.result:
Update results: WL#4435.
mysql-test/t/ps.test:
WL#4435: A test case for an SQL-part of the problem.
sql-common/client.c:
Bug#39519.
Implement new functionality in cli_flush_use_result():
if flush_all_delete is TRUE, then it should read/flush
all pending results.
sql/Makefile.am:
Add a new header sql_prepare.h to the list
of build headers.
sql/events.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/handler.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/mysql_priv.h:
Move sql_prepare.cc-specific declarations to a new
header - sql_prepare.h.
sql/procedure.h:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/protocol.cc:
Move the logic responsible for sending of one result
set row to the Protocol class. Define a template
for end-of-statement action.
Refactoring: change prepare_for_send() so that it accepts
only what it really needs -- a number of elements in the list.
Rename send_fields() to send_result_set_metadata().
sql/protocol.h:
Update with new declarations (WL#4435).
Rename send_fields() -> send_result_set_metadata().
prepare_for_send() only needs the number of columns to send,
and doesn't use the item list - update signature to require
only what's needed.
Add a new protocol type -- Protocol_local.
sql/repl_failsafe.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/slave.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_acl.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_base.cc:
Include sql_prepare.h (for Reprepare_observer).
sql/sql_cache.cc:
Extend the query cache flags block to be able
to store a numeric id for the result format,
not just a flag binary/non-binary.
sql/sql_class.cc:
Update to use the rename of Protocol::send_fields()
to Protocol::send_result_set_metadata().
Use Protocol::send_one_result_set_row().
sql/sql_class.h:
Move the declaration of Reprepare_observer to the
new header - sql_prepare.h.
Update to the new signature of class Protocol::send_fields().
sql/sql_connect.cc:
Use a protocol template method instead of
raw NET layer API at the end of a statement.
sql/sql_cursor.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_error.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_handler.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
Use new method Protocol::send_one_result_set_row().
sql/sql_help.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_lex.cc:
Initialize multi_statements variable.
Add a handy constant for empty lex
string.
sql/sql_lex.h:
Add a separate member for a standalone
parsing option - multi-statements support.
sql/sql_list.cc:
sql_list.h is a standalone header now,
no need to include mysql_priv.h.
sql/sql_list.h:
Make sql_list.h a stand-alone header.
sql/sql_parse.cc:
Include sql_prepare.h for prepared
statements- related declarations.
Use a new Protocol template method to end
each statement (send OK, EOF or ERROR to
the client).
sql/sql_prepare.cc:
Implement Execute Direct API (WL#4264),
currently unused. It will be used by the service
interface (Backup).
Use a new header - sql_prepare.h.
Add support for OUT parameters in the
binary and text protocol (prepared statements
only).
sql/sql_prepare.h:
Add a new header to contain (for now)
all prepared statement- external
related declarations.
sql/sql_profile.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_repl.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_select.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_show.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_string.h:
Add a way to convert a String to LEX_STRING.
sql/sql_table.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_update.cc:
Remove an extraneous my_error(). The error
is already reported in update_non_unique_table_error().
sql/sql_yacc.yy:
Support for multi-statements is an independent
property of parsing, not derived from
the protocol type.
tests/mysql_client_test.c:
Add tests for WL#4435 (binary protocol).
"have_profiling"
1) Renamed have_community_features server system variable to
have_profiling.
2) Removed eable-community-features configure option and
ENABLE_COMMUNITY_FEATURES macro.
3) Removed COMMUNITY_SERVER macro and replaced its usage by
ENABLED_PROFILING.
Only --enable-profiling is now needed to enable profiling.
It was the only existing "community feature", so there was
no need for both configure options.
Using --enable-community-features will give a warning message
since it no longer exists.
given an already connected MYSQL handle
mysql_real_connect() did not check whether the MYSQL connection
handler was already connected and connected again even if so.
Now a CR_ALREADY_CONNECTED error is returned.
- Read plug.in to fid the name of the engine to link with, does not have
to be same as engine dir
- Use engine dir when figuring out which libraries to build limbysqld with
http://lists.mysql.com/commits/59686
Cleanup pthread_self(), pthread_create(), pthread_join() implementation on Windows.
Prior implementation is was unnecessarily complicated and even differs in embedded
and non-embedded case.
Improvements in this patch:
* pthread_t is now the unique thread ID, instead of HANDLE returned by beginthread
This simplifies pthread_self() to be just straight GetCurrentThreadId().
prior it was much art involved in passing the beginthread() handle from the caller
to the TLS structure in the child thread ( did not work for the main thread of
course)
* remove MySQL specific my_thread_init()/my_thread_end() from pthread_create.
No automagic is done on Unix on pthread_create(). Having the same on Windows will
improve portability and avoid extra #ifdef's
* remove redefinition of getpid() - it was defined as GetCurrentThreadId()
2677 Vladislav Vaintroub 2008-11-04
CMakeLists.txt files cleanup
- remove SAFEMALLOC and SAFE_MUTEX definitions that were
present in *each* CMakeLists.txt. Instead, put them into top level
CMakeLists.txt, but disable on Windows, because
a) SAFEMALLOC does not add any functionality that is not already
present in Debug C runtime ( and 2 safe malloc one on top of the other
only unnecessarily slows down the server)
b)SAFE_MUTEX does not work on Windows and have been
explicitely disabled on Windows with #undef previously. Fortunately,
ntdll does pretty good job identifying l problems with
CRITICAL_SECTIONs.
DebugBreak()s on using uninited critical section, unlocking unowned
critical section)
-Also, remove occationally used -D_DEBUG (added by compiler
anyway)
sql/udf_example.c:
use unixish end of line
We cann connect() in a non-blocking mode to be able to specify a
non-standard timeout.
The problem was that we did not fetch the status from the
non-blocking connect(). We assumed that poll() would not return
a POLLIN flag if the connect failed. But on some platforms this
is not true.
After a successful poll() we do now retrieve the status value
from connect() with getsockopt(...SO_ERROR...). Now we do know
if (and how) the connect failed.
The test case for my investigation was rpl.rlp_ssl1 on an
Ubuntu 9.04 x86_64 machine. Both, IPV4 and IPV6 were active.
'localhost' resolved first for IPV6 and then for IPV4. The
connection over IPV6 was blocked. rpl.rlp_ssl1 timed out
as it did not notice the failed connect(). The first read()
failed, which was interpreted as a master crash and the
connection was tried to reestablish with the same result
until the retry limit was reached.
With the fix, the connect() problem is immediately recognized,
and the connect() is retried on the second resolution for
'localhost', which is successful.
libmysqld/libmysqld.c:
Bug#37267 - connect() EINPROGRESS failures mishandled in client library
Changed a DBUG print string to distinguish the two mysql_real_connect()
implementations in DBUG traces.
mysql-test/include/wait_for_slave_param.inc:
Bug#37267 - connect() EINPROGRESS failures mishandled in client library
Made timeout value available in error message.
mysql-test/suite/rpl/r/rpl_get_master_version_and_clock.result:
Bug#37267 - connect() EINPROGRESS failures mishandled in client library
Fixed test result. Connect error is now detected as CR_CONN_HOST_ERROR
(2003) instead of CR_SERVER_LOST (2013).
sql-common/client.c:
Bug#37267 - connect() EINPROGRESS failures mishandled in client library
Added retrieval of the error code from the non-blocking connect().
Added DBUG.
Added comment.
DECIMAL and TIMESTAMP used to have NUM_FLAG, but NEWDECIMAL was forgotten.
It's correct that TIMESTAMP does not have the flag nowadays (manual will be updated, connectors
developers will be notified).
client/mysqldump.c:
IS_NUM_FIELD(f) removed and replaced by its definition (f>flags & NUM_FLAG).
include/mysql.h:
- IS_NUM_FIELD() is removed because name is too close to IS_NUM() and it is not used a lot
- INTERNAL_NUM_FIELD() is removed:
* it forgets to test NEWDECIMAL (when IS_NUM() was updated for NEWDECIMAL we forgot
to update INTERNAL_NUM_FIELD()), that's why client didn't mark NEWDECIMAL with NUM_FLAG (a bug).
* it has an obsolete test for length of the TIMESTAMP field: test became accidentally wrong when length
of TIMESTAMP was changed to always be 19 (when the format was changed from YYYYMMDDhhmmss to
YYYY-MM-DD hh:mm:ss), never 8 or 14 anymore. That obsolete test caused TIMESTAMP to lose NUM_FLAG,
which was an accidental but good change (see below).
* IS_NUM() should be used instead
- IS_NUM(f) is changed: TIMESTAMP used to be parsable as a number without quotes (when it was formatted as
"YYYYMMDDhhmmss"); but it is not anymore (now that it is "YYYY-MM-DD hh:mm:ss"), so it should not have NUM_FLAG
(mysqldump needs to quote TIMESTAMP values), so IS_NUM() should return false for it.
libmysqld/lib_sql.cc:
use IS_NUM() instead of INTERNAL_NUM_FIELD()
mysql-test/r/bigint.result:
result change: NEWDECIMAL fields now have NUM_FLAG (32768)
mysql-test/r/metadata.result:
result change: NEWDECIMAL fields now have NUM_FLAG (32768)
mysql-test/r/mysqldump.result:
DECIMAL columns are not quoted anymore by mysqldump. Which is ok, the parser does not need '' for them
mysql-test/r/ps_2myisam.result:
result change: NEWDECIMAL fields now have NUM_FLAG (32768)
mysql-test/r/ps_3innodb.result:
result change: NEWDECIMAL fields now have NUM_FLAG (32768)
mysql-test/r/ps_4heap.result:
result change: NEWDECIMAL fields now have NUM_FLAG (32768)
mysql-test/r/ps_5merge.result:
result change: NEWDECIMAL fields now have NUM_FLAG (32768)
mysql-test/suite/ndb/r/ps_7ndb.result:
result change: NEWDECIMAL fields now have NUM_FLAG (32768)
mysql-test/t/metadata.test:
test for BUG#42980
sql-common/client.c:
use IS_NUM() instead of INTERNAL_NUM_FIELD()
This patch provides performance improvements:
- send_fields() when character_set_results = latin1
is now about twice faster for column/table/database
names, consisting on ASCII characters.
Changes:
- Protocol doesn't use "convert" temporary buffer anymore,
and converts strings directly to "packet".
- General conversion optimization: quick conversion
of ASCII strings was added.
modified files:
include/m_ctype.h
- Adding a new flag.
- Adding a new function prototype
libmysqld/lib_sql.cc
- Adding quick conversion method for embedded library:
conversion is now done directly to result buffer,
without using a temporary buffer.
mysys/charset.c
- Mark all dynamic ucs2 character sets as non-ASCII
- Mark some dymamic 7bit and 8bit charsets as non-ASCII
(for example swe7 is not fully ASCII compatible).
sql/protocol.cc
- Adding quick method to convert a string directly
into protocol buffer, without using a temporary buffer.
sql/protocol.h
- Adding a new method prototype
sql/sql_string.cc
Optimization for conversion between two ASCII-compatible charsets:
- quickly convert ASCII strings,
switch to mc_wc->wc_mb method only when a non-ASCII character is met.
- copy four ASCII characters at once on i386
strings/conf_to_src.c
- Marking non-ASCII character sets with a flag.
strings/ctype-extra.c
- Regenerating ctype-extra.c by running "conf_to_src".
strings/ctype-uca.c
- Marking UCS2 character set as non-ASCII.
strings/ctype-ucs2.c
- Marking UCS2 character set as non-ASCII.
strings/ctype.c
- A new function to detect if a 7bit or 8bit character set
is ascii compatible.
htttp://lists.mysql.com/commits/50957?f=plain
Always use TLS functions instead of __declspec(thread) to access
thread local storage variables.
The change removes the necessity to recomplile the same source
files twice - with USE_TLS for DLLs and without USE_TLS for EXEs.
Real benefit of this change is better readability and maintainability
of TLS functions within MySQL.
There is a performance loss using TlsXXX functions compared to __declspec
but the difference is negligible in practice. In a sysbench-like benchmark
I ran with with TlsGetValue, pthread_[get|set]_specific was called 600000000
times and took 0.17sec of total 35min CPU time, or 0.008%.
Backport from 6.0 to 5.1.
Only those sync points are included, which are used in debug_sync.test.
The Debug Sync Facility allows to place synchronization points
in the code:
open_tables(...)
DEBUG_SYNC(thd, "after_open_tables");
lock_tables(...)
When activated, a sync point can
- Send a signal and/or
- Wait for a signal
Nomenclature:
- signal: A value of a global variable that persists
until overwritten by a new signal. The global
variable can also be seen as a "signal post"
or "flag mast". Then the signal is what is
attached to the "signal post" or "flag mast".
- send a signal: Assign the value (the signal) to the global
variable ("set a flag") and broadcast a
global condition to wake those waiting for
a signal.
- wait for a signal: Loop over waiting for the global condition until
the global value matches the wait-for signal.
Please find more information in the top comment in debug_sync.cc
or in the worklog entry.
.bzrignore:
WL#4259 - Debug Sync Facility
Added the symbolic link libmysqld/debug_sync.cc.
CMakeLists.txt:
WL#4259 - Debug Sync Facility
Added definition for ENABLED_DEBUG_SYNC.
configure.in:
WL#4259 - Debug Sync Facility
Added definition for ENABLED_DEBUG_SYNC.
include/my_sys.h:
WL#4259 - Debug Sync Facility
Added definition for the DEBUG_SYNC_C macro.
libmysqld/CMakeLists.txt:
WL#4259 - Debug Sync Facility
Added sql/debug_sync.cc.
libmysqld/Makefile.am:
WL#4259 - Debug Sync Facility
Added sql/debug_sync.cc.
mysql-test/include/have_debug_sync.inc:
WL#4259 - Debug Sync Facility
New include file.
mysql-test/mysql-test-run.pl:
WL#4259 - Debug Sync Facility
Added option --debug_sync_timeout.
mysql-test/r/debug_sync.result:
WL#4259 - Debug Sync Facility
New test result.
mysql-test/r/have_debug_sync.require:
WL#4259 - Debug Sync Facility
New require file.
mysql-test/t/debug_sync.test:
WL#4259 - Debug Sync Facility
New test file.
mysys/my_static.c:
WL#4259 - Debug Sync Facility
Added definition for debug_sync_C_callback_ptr.
mysys/thr_lock.c:
WL#4259 - Debug Sync Facility
Added sync point "wait_for_lock".
sql/CMakeLists.txt:
WL#4259 - Debug Sync Facility
Added debug_sync.cc and debug_sync.h.
sql/Makefile.am:
WL#4259 - Debug Sync Facility
Added debug_sync.cc and debug_sync.h.
sql/debug_sync.cc:
WL#4259 - Debug Sync Facility
New source file.
sql/debug_sync.h:
WL#4259 - Debug Sync Facility
New header file.
sql/mysqld.cc:
WL#4259 - Debug Sync Facility
Added opt_debug_sync_timeout.
Added calls to debug_sync_init() and debug_sync_end().
Fixed a purecov comment (unrelated).
sql/set_var.cc:
WL#4259 - Debug Sync Facility
Added server variable "debug_sync".
sql/set_var.h:
WL#4259 - Debug Sync Facility
Added declaration for server variable "debug_sync".
sql/share/errmsg.txt:
WL#4259 - Debug Sync Facility
Added error messages ER_DEBUG_SYNC_TIMEOUT and ER_DEBUG_SYNC_HIT_LIMIT.
sql/sql_base.cc:
WL#4259 - Debug Sync Facility
Added sync points "after_flush_unlock" and "before_lock_tables_takes_lock".
sql/sql_class.cc:
WL#4259 - Debug Sync Facility
Added initialization for debug_sync_control to THD::THD.
Added calls to debug_sync_init_thread() and debug_sync_end_thread().
sql/sql_class.h:
WL#4259 - Debug Sync Facility
Added element debug_sync_control to THD.
storage/myisam/myisamchk.c:
Fixed a typo in an error message string (unrelated).
Restore a stub of the removed mysql_odbc_escape_string function
to fix a ABI breakage. The function was intended to be private
and used only by Connector/ODBC, but, unfortunately, it was exported
as part of the ABI. Nonetheless, only a stub is restored as the
original function is inherently broken and shouldn't be used.
This restoration only applies to MySQL 5.0. This will be addressed
differently in later versions -- reworked library versioning.
include/mysql.h:
Restore mysql_odbc_escape_string prototype.
include/mysql_h.ic:
Update ABI check.
libmysql/libmysql.c:
Restore a mysql_odbc_escape_string stub.
libmysql/libmysql.def:
Restore mysql_odbc_escape_string.
libmysqld/libmysqld.def:
Restore mysql_odbc_escape_string.
bzr branch mysql-5.1-performance-version mysql-trunk # Summit
cd mysql-trunk
bzr merge mysql-5.1-innodb_plugin # which is 5.1 + Innodb plugin
bzr rm innobase # remove the builtin
Next step: build, test fixes.
- Define and pass compile time path variables as pre-processor definitions to
mimic the makefile build.
- Set new CMake version and policy requirements explicitly.
- Changed DATADIR to MYSQL_DATADIR to avoid conflicting definition in
Platform SDK header ObjIdl.h which also defines DATADIR.
an assertion in a debug build.
The reason is that the C API doesn't support multiple result sets for prepared
statements and attempting to execute a stored routine which returns multiple result
sets sometimes lead to a network error. The network error sets the diagnostic area
prematurely which later leads to the assert when an attempt is made to set a second
server state.
This patch fixes the issue by changing the scope of the error code returned by
sp_instr_stmt::execute() to include any error which happened during the execution.
To assure that Diagnostic_area::is_sent really mean that the message was sent all
network related functions are checked for return status.
libmysqld/lib_sql.cc:
* Changed prototype to return success/failure status on net_send_error_packet(),
net_send_ok(), net_send_eof(), write_eof_packet().
mysql-test/r/sp_notembedded.result:
* Added test case for bug 44521
mysql-test/t/sp_notembedded.test:
* Added test case for bug 44521
sql/protocol.cc:
* Changed prototype to return success/failure status on net_send_error_packet(),
net_send_ok(), net_send_eof(), write_eof_packet().
sql/protocol.h:
* Changed prototype to return success/failure status on net_send_error_packet(),
net_send_ok(), net_send_eof(), write_eof_packet().
sql/sp_head.cc:
* Changed prototype to return success/failure status on net_send_error_packet(),
net_send_ok(), net_send_eof(), write_eof_packet().
Remove custom DLL loader code from innodb plugin code, use
symbols exported from mysqld.
storage/innodb_plugin/handler/ha_innodb.cc:
Remove a Win32 workaround for current_thd.
The original problem that innodb plugin used
value of TLS variable across DLL boundaries is
solved in MySQL server (current_thd is a function
not TLS variable now)
storage/innodb_plugin/handler/handler0alter.cc:
Remove custom delay loader
storage/innodb_plugin/handler/handler0vars.h:
Remove custom delay loader
storage/innodb_plugin/handler/i_s.cc:
Remove custom delay loader
storage/innodb_plugin/handler/win_delay_loader.cc:
Remove custom delay loader
storage/innodb_plugin/plug.in:
Remove commented out MYSQL_PLUGIN_STATIC,
CMake would not parse that correctly
