Relax the number-of-XA-engines check on recovery. Allow *more*
engines to be present than absolutely necessary, extra engines
cannot affect ACID guarantees of the recovery process.
As a bonus, 10.0->crash->10.1 upgrade won't complain about
wsrep being a new XA storge engine.
- Added --start option to mysqld which don't prints notes to log on startup
This helps to find errors in configure options easier
- Dont write [Note] entries to log after we have abort the server
This makes it easier to find what went wrong
- Don't by default write out Changed limits for max_open_files as this didn't really change from anything the user gave us
- Dont write warnings about not using --explicit_defaults_for_timestamp (we don't have plans do depricate the old behaviour)
--encrypt-binlog and --encrypt-tmp-files used to mean
"encrypt XXX if encryption is available, otherwise don't encrypt",
now they mean "encrypt or fail with an error".
Introduce Log_event_writer() that encapsulates
writing data to an IO_CACHE with automatic checksum calculation.
Now all events properly checksum themselves as needed.
Use Log_event_writer in MYSQL_BIN_LOG::write_cache() instead
of copy-pasting its logic all over.
Later Log_event_writer will also do encryption.
If a transaction T1 needs to wait for a transaction T2, T2's commit will
skip the normal binlog_commit_wait_usec delay, in order not to needlessly
stall throughput.
This works by checking if T2 is already ready to commit. If so, it is woken
up. If not, we set a flag in T2 so that when it gets ready to commit, it
will do so immediately.
But there was a potential race due to insufficient locking, if T2 gets ready
to commit just at the point where T1 does the check. If the race hits, the
wakeup (and early commit) of T2 might be lost.
The race is only theoretical (from code inspection, no known test case), but
seems best to fix it anyway, by properly locking LOCK_prepare_ordered around
the check.
While sql_bin_log=1(0) is meant to control binary logging for the
current session so that the updates to do(not) get logged into the
binary log to be replicated to the async MariaDB slave. The same
should not affect galera replication.
That is, the updates should always get replicated to other galera
nodes regardless of sql_bin_log's value.
Fixed by making sure that the updates are written to binlog cache
irrespective of sql_bin_log.
Added test cases.
Fix was to add a test in Query_log_event::Query_log_event() if we are using
CREATE ... SELECT and in this case use trans cache, like we do on the master.
This avoid using (with doesn't have checksum)
Other things:
- Removed dummy call my_checksum(0L, NULL, 0)
- More DBUG_PRINT
- Cleaned up Log_event::need_checksum() to make it more readable (similar as in MySQL 5.6)
- Renamed variable that was hiding another one in create_table_imp()
field.cc
- Fixed warning about overlapping memory copy (backport from 10.0)
Item_subselect.cc
- Fixed core dump in main.view
- Problem was that thd->lex->current_select->master_unit()->item was not set, which caused crash in maxr_as_dependent
sql/mysqld.cc
- Got error on shutdown as we where freeing mutex before all THD objects was freed
(~THD uses some mutex). Fixed by during shutdown freeing THD inside mutex.
sql/log.cc
- log_space_lock and LOCK_log where locked in inconsistenly. Fixed by not having a log_space_lock around purge_logs.
sql/slave.cc
- Remove unnecessary log_space_lock
- Move cond_broadcast inside lock to ensure we don't miss the signal
Other things:
- Avoid calling init_and_set_log_file_name() when opening binary log.
- Remove newlines early when reading from index file.
- Ensure that reset_logs() will work even if thd is 0 (Can happen on startup)
- Added thd to sart_slave_threads() for better error handling.
- Changed ER(ER_...) to ER_THD(thd, ER_...) when thd was known or if there was many calls to current_thd in the same function.
- Changed ER(ER_..) to ER_THD_OR_DEFAULT(current_thd, ER...) in some places where current_thd is not necessary defined.
- Removing calls to current_thd when we have access to thd
Part of this is optimization (not calling current_thd when not needed),
but part is bug fixing for error condition when current_thd is not defined
(For example on startup and end of mysqld)
Notable renames done as otherwise a lot of functions would have to be changed:
- In JOIN structure renamed:
examined_rows -> join_examined_rows
record_count -> join_record_count
- In Field, renamed new_field() to make_new_field()
Other things:
- Added DBUG_ASSERT(thd == tmp_thd) in Item_singlerow_subselect() just to be safe.
- Removed old 'tab' prefix in JOIN_TAB::save_explain_data() and use members directly
- Added 'thd' as argument to a few functions to avoid calling current_thd.
Add log_bin_index, log_bin_basename and relay_log_basename system
variables. Also, convert relay_log_index system variable to
NO_CMD_LINE and implement --relay-log-index as a command line
option.
Remove the too restrictive bugfix for bug#67088.
FIFO can be used for general/slow logs, but lseek() and fsync() on
FIFO fail. And open() needs to be non-blocking, in case the other
end isn't reading.
The hangs occur when the group_commit_orderer object is freed before the last
mark_start_commit() call on it - this loses the wakeup to other waiting worker
threads, causing them to hang until killed manually.
The object was freed because wakeup_subsequent_commits() was called two early
in two places. For MDEV-7888, during ANALYZE TABLE, and for MDEV-7929 during
record_gtid() after processing a DDL event. The group_commit_orderer object
can be freed when its last transaction has called wait_for_prior_commit().
Fix by implementing a suspend/resume mechanism for wakeup_subsequent_commits()
that can be used in places where a transaction is committed without this being
the commit of the actual replication event group.
Also add a protection mechanism (that asserts in debug builds) which can
prevent the too-early free and hang if other similar bugs should remain in
other parts of the code.
remove group_commit_reason_immediate
rename group_commit_reason_transaction to group_commit_trigger_lock_wait
rename group_commit_reason_usec to group_commit_trigger_timeout
rename group_commit_reason_count to group_commit_triggger_count
This patch fixes a bug in the error handling in parallel replication, when one
worker thread gets a failure and other worker threads processing later
transactions have to rollback and abort.
The problem was with the lifetime of group_commit_orderer objects (GCOs).
A GCO is freed when we register that its last event group has committed. This
relies on register_wait_for_prior_commit() and wait_for_prior_commit() to
ensure that the fact that T2 has committed implies that any earlier T1 has
also committed, and can thus no longer execute mark_start_commit().
However, in the error case, the code was skipping the
register_wait_for_prior_commit() and wait_for_prior_commit() calls. Thus
commit ordering was not guaranteed, and a GCO could be freed too early. Then a
later mark_start_commit() would reference deallocated GCO, which could lead to
lost wakeup (causing slave threads to hang) or other corruption.
This patch makes also the error case respect commit order. This way, also the
error case gets the GCO lifetime correct, and the hang no longer occurs.
The following global status variables where added:
* binlog_group_commit_reason_count
* binlog_group_commit_reason_usec
* binlog_group_commit_reason_transaction
* binlog_group_commit_reason_immediate
binlog_group_commit_reason_count corresponds to group commits made by
virtue of the binlog_commit_wait_count variable.
binlog_group_commit_reason_usec corresponds to the binlog_commit_wait_usec
variable.
binlog_group_commit_reason_transaction is a result of ordered
transaction that need to occur in the same order on the slave and can't
be parallelised.
binlog_group_commit_reason_immediate is caused to prevent stalls with
row locks as described in log.cc:binlog_report_wait_for. This immediate
count is also counted a second time in binlog_group_commit_reason_transaction.
Overall binlog_group_commits = binlog_group_commit_reason_count +
binlog_group_commit_reason_usec + binlog_group_commit_reason_transaction
This work was funded thanks to Open Source Developers Club Australia.
Parallel replication (in 10.0 / "conservative" mode) relies on binlog group
commits to group transactions that can be safely run in parallel on the
slave. The --binlog-commit-wait-count and --binlog-commit-wait-usec options
exist to increase the number of commits per group. But in case of conflicts
between transactions, this can cause unnecessary delay and reduced througput,
especially on a slave where commit order is fixed.
This patch adds a heuristics to reduce this problem. When transaction T1 goes
to commit, it will first wait for N transactions to queue up for a group
commit. However, if we detect that another transaction T2 is waiting for a row
lock held by T1, then we will skip the wait and let T1 commit immediately,
releasing locks and let T2 continue.
On a slave, this avoids the unfortunate situation where T1 is waiting for T2
to join the group commit, but T2 is waiting for T1 to release locks, causing
no work to be done for the duration of the --binlog-commit-wait-usec timeout.
(The heuristic seems reasonable on the master as well, so it is enabled for
all transactions, not just replication transactions).
