When the query cache is disabled, the server shouldn't attempt to take the
query cache mutex.
By using the command line option --query_cache_type=0, the user can disable
(backport from mysql-pe)
mysql-test/t/query_cache_disabled-master.opt:
* added test case for bug38551
mysql-test/t/query_cache_disabled.test:
* added test case for bug38551
sql/set_var.cc:
* Added before-trigger to verify that query_cache_type wasn't turned off or on during
runtime.
sql/set_var.h:
* Changed order on how the enumeration is processed. By first projecting the
character representation of the variable to a temporary integer we can have
one function instead of two to check if the value is valid.
sql/share/errmsg-utf8.txt:
* Added error message for query cache disabled state
sql/sql_cache.cc:
* If the query cache is disabled at start up, shorten the execution path and avoid
grabbing the query cache mutex each time the invalidate interface methods are called.
sql/sql_cache.h:
* Added new methods to set the query cache into a disabled state.
XA START may cause assertion failure/server crash when it is called
after unilateral roll back issued by the Resource Manager (both
in regular transaction and after XA transaction).
The problem was that rm_error variable wasn't set/reset properly.
mysql-test/r/xa.result:
A test case for BUG#43171.
mysql-test/t/xa.test:
A test case for BUG#43171.
sql/handler.cc:
Setting rm_error when we're out of XA transaction has no
special meaning. But it blocks reset of thd->transaction.xid
structure later.
sql/sql_parse.cc:
Reset rm_error before we enter ha_rollback(), so
thd->transaction.xid strucure is reinitialized.
Bug#46539 Various crashes on INSERT IGNORE SELECT + SELECT FOR UPDATE.
If a transaction was rolled back inside InnoDB due to a deadlock
or lock wait timeout, and the statement had IGNORE clause,
the server could crash at the end of the statement or on shutdown.
This was caused by the error handling infrastructure's attempt to
ignore a non-ignorable error.
When a transaction rollback request is raised, switch off
current_select->no_error flag, so that the following error
won't be ignored.
Instead, we could add !thd->is_fatal_sub_stmt_error to
my_message_sql(), but since in write_record() we switch
off no_error, the same approach is used in
thd_mark_transaction_to_rollback().
@todo: call thd_mark_transaction_to_rollback() from
handler::print_error(), then we can easily make sure
that the error reported by print_error is not ignored.
mysql-test/r/innodb_lock_wait_timeout_1.result:
Update results (Bug#46539).
mysql-test/t/innodb_lock_wait_timeout_1.test:
Add a test case for Bug#46539
sql/sql_class.cc:
When a transaction rollback request is raised, switch of
current_select->no_error flag, so that the following error
won't be ignored.
Item_sum::set_aggregator() may be called multiple times during query preparation.
On subsequent calls: verify that the aggregator type is the same,
and re-use the existing Aggregator.
sql/item_sum.cc:
In Item_sum::set_aggregator(): re-use existing Aggregator if already set.
Remove some friend declarations, add some accessor functions.
Cleanup some DBUG_ENTER and DBUG_RETURN code.
sql/item_sum.h:
Make some member fields private, add accessors instead.
Remove some un-necessary friend declarations.
Remove some default arguments from constructors.
sql/opt_sum.cc:
Use accessor functions in Item_sum.
sql/sql_select.cc:
Fix mis-spelled DBUG_ENTER text.
Use accessor functions in Item_sum.
sql/sql_yacc.yy:
Use explicit true/false rather than default arguments when constructing
Item_sum_xxx objects.
binlog, replication aborts
In SBR or MBR, the schema name is not being written to the binlog
when executing a LOAD DATA statement. This becomes a problem when
the current database (lets call it db1) is different from the
table's schema (lets call it db2). For instance, take the
following statements:
use db1;
load data local infile 'infile.txt' into table db2.t
Should this statement be logged without t's schema (db2), when
replaying it, one can get db1.t populated instead of db2.t (if
db1.t exists). On the other hand, if there is no db1.t at all,
replication will stop.
We fix this by always logging the table (in load file) with fully
qualified name when its schema is different from the current
database or when no default database was selected.
"What do you mean, there's a bug? There isn't even code!"
There was some token code for plug-in variables of the SET type,
but clearly this never worked, or was subject to massive bit rot
since. Bug-fixes ... fail-safes ... tests -- fais au mieux, mon chou!
mysys/my_getopt.c:
SETs set-up should set up a default value, but no min/max bounding.
mysys/typelib.c:
fail-safe requested by serg: don't try to skip separator when we're
already at end of string.
sql/sql_plugin.cc:
check_func_set:
Initialize error_len as find_set() will only update it on error,
and we're using the value to see whether an error has occurred (!= 0),
so we'd better not have a random val in there.
value_ptr:
There's no guarantee we're handed string lengths, so play it safe!
Use prepared string lengths where possible for minimum speed gain,
otherwise determine on the fly!
BUG#41597 - After rename of user, there are additional grants
when grants are reapplied.
Fixed build failure on Windows. Added missing cast.
sql/sql_acl.cc:
Fixed build failure on Windows. Added missing cast.
Problem 1:
column_priv_hash uses utf8_general_ci collation
for the key comparison. The key consists of user name,
db name and table name. Thus user with privileges on table t1
is able to perform the same operation on T1
(the similar situation with user name & db name, see acl_cache).
So collation which is used for column_priv_hash and acl_cache
should be case sensitive.
The fix:
replace system_charset_info with my_charset_utf8_bin for
column_priv_hash and acl_cache
Problem 2:
The same situation with proc_priv_hash, func_priv_hash,
the only difference is that Routine name is case insensitive.
So the fix is to use my_charset_utf8_bin for
proc_priv_hash & func_priv_hash and convert routine name into lower
case before writing the element into the hash and
before looking up the key.
Additional fix: mysql.procs_priv Routine_name field collation
is changed to utf8_general_ci.
It's necessary for REVOKE command
(to find a field by routine hash element values).
Note:
It's safe for lower-case-table-names mode too because
db name & table name are converted into lower case
(see GRANT_NAME::GRANT_NAME).
mysql-test/include/have_case_insensitive_fs.inc:
test case
mysql-test/r/case_insensitive_fs.require:
test case
mysql-test/r/grant_lowercase_fs.result:
test result
mysql-test/r/lowercase_fs_off.result:
test result
mysql-test/r/ps_grant.result:
test result
mysql-test/r/system_mysql_db.result:
changed Routine_name field collation to case insensitive
mysql-test/t/grant_lowercase_fs.test:
test case
mysql-test/t/lowercase_fs_off.test:
test case
scripts/mysql_system_tables.sql:
changed Routine_name field collation to case insensitive
scripts/mysql_system_tables_fix.sql:
changed Routine_name field collation to case insensitive
sql/sql_acl.cc:
Problem 1:
column_priv_hash uses utf8_general_ci collation
for the key comparison. The key consists of user name,
db name and table name. Thus user with privileges on table t1
is able to perform the same operation on T1
(the similar situation with user name & db name, see acl_cache).
So collation which is used for column_priv_hash and acl_cache
should be case sensitive.
The fix:
replace system_charset_info with my_charset_utf8_bin for
column_priv_hash and acl_cache
Problem 2:
The same situation with proc_priv_hash, func_priv_hash,
the only difference is that Routine name is case insensitive.
So the fix is to use my_charset_utf8_bin for
proc_priv_hash & func_priv_hash and convert routine name into lower
case before writing the element into the hash and
before looking up the key.
Additional fix: mysql.procs_priv Routine_name field collation
is changed to utf8_general_ci.
It's necessary for REVOKE command
(to find a field by routine hash element values).
Note:
It's safe for lower-case-table-names mode too because
db name & table name are converted into lower case
(see GRANT_NAME::GRANT_NAME).
This assertion would occur if UPDATE was used to update multiple
tables containing an AUTO_INCREMENT column and if the inserted
row had a user-supplied value for that column. The assertion
could then be triggered by the next statement.
The problem was only noticeable on debug builds of the server.
The cause of the problem was that the code for multi update did
not properly reset the TABLE->auto_increment_if_null flag after update.
The flag is used to indicate that a non-null value of an auto_increment field
has been provided by the user or retrieved from a current record.
Open_tables() contains an assertion that tests this flag, and this
was triggered in this case by ALTER TABLE.
This patch fixes the problem by resetting the auto_increment_if_null
field to FALSE once a row has been updated.
This bug is similar to Bug#47274, but for multi update rather
than INSERT DELAYED.
Test case added to update.test.
Problem: involving a spatial index for "non-spatial" queries
(that don't containt MBRXXX() functions) may lead to failed assert.
Fix: don't use spatial indexes in such cases.
mysql-test/r/gis-rtree.result:
Fix for bug#48258: Assertion failed when using a spatial index
- test result.
mysql-test/t/gis-rtree.test:
Fix for bug#48258: Assertion failed when using a spatial index
- test case.
sql/opt_range.cc:
Fix for bug#48258: Assertion failed when using a spatial index
- allow only spatial functions (MBRXXX) for itMBR keyparts.
Original revision:
------------------------------------------------------------
revno: 2801.10.16
committer: Vladislav Vaintroub <vvaintroub@mysql.com>
branch nick: mysql-azalea-bugfixing
timestamp: Mon 2009-08-10 13:26:23 +0200
message:
Bug #46267 Shutdown with idle connection crash the server.
The crash happens when mysqld logs a warning. The macro
ER() used in sql_print_warning references thread local storage
variable via current_thd(), to output the warning in "current
user language". However, for the shutdown thread,
current_thd() will return NULL, and mysqld will crash while
derefencing NULL pointer.
Solution: get error mesage text with ER_DEFAULT() macro
instead of ER(), this does not current_thd() and will output
errors in default language.
------------------------------------------------------------
Conflicts
=========
Text conflict in .bzr-mysql/default.conf
Text conflict in libmysqld/CMakeLists.txt
Text conflict in libmysqld/Makefile.am
Text conflict in mysql-test/collections/default.experimental
Text conflict in mysql-test/extra/rpl_tests/rpl_row_sp006.test
Text conflict in mysql-test/suite/binlog/r/binlog_tmp_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata_fatal.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_create_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_sp006_InnoDB.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_log.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_sp006.result
Text conflict in mysql-test/t/mysqlbinlog.test
Text conflict in sql/CMakeLists.txt
Text conflict in sql/Makefile.am
Text conflict in sql/log_event_old.cc
Text conflict in sql/rpl_rli.cc
Text conflict in sql/slave.cc
Text conflict in sql/sql_binlog.cc
Text conflict in sql/sql_lex.h
21 conflicts encountered.
NOTE
====
mysql-5.1-rpl-merge has been made a mirror of mysql-next-mr:
- "mysql-5.1-rpl-merge$ bzr pull ../mysql-next-mr"
This is the first cset (merge/...) committed after pulling
from mysql-next-mr.
to 5.1 partially. This patch brings what was left to mysql-next-mr.
Original revisions in 6.0:
------------------------------------------------------------
revno: 2617.31.26
committer: Alexander Nozdrin <alik@sun.com>
branch nick: 6.0-rt-bug43138.3
timestamp: Thu 2009-04-30 19:31:30 +0400
message:
Fix for Bug#43138: DROP DATABASE failure does not clean up message list.
The problem was that the high-level function mysql_rm_db() invoked
low-level mysql_rm_table_part2(), which reported low-level error
(Unknown table) if SE refused to delete a table. Also when
mysql_rm_table_part2() reported an error, it didn't add corresponding
warning into the list (because it is used from other places where such
behaviour is required).
The fix is to
1. Remove no_warnings_for_error usage from sql_table.cc
2. Improve internal error handler support in THD, so that
a stack of error handlers is allowed.
3. Create an internal error handler (Drop_table_error_handler)
to silence useless warnings.
4. Use the handler in DROP DATABASE and DROP TABLE statements.
------------------------------------------------------------
revno: 2617.69.38
committer: Alexander Nozdrin <alik@sun.com>
branch nick: mysql-next-bugfixing-bug37431
timestamp: Mon 2009-08-24 21:52:09 +0400
message:
A test case for Bug#37431 (DROP TABLE does not report errors correctly).
------------------------------------------------------------
revno: 2617.31.29
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-6.0-runtime
timestamp: Fri 2009-05-01 17:37:34 +0400
message:
Follow-up for fix for bug "Bug#43138: DROP DATABASE failure
does not clean up message list".
Fixed drop.test failure under non-debug server by moving part
of test dependent on debug-only feature to separate .test file,
which won't be run for non-debug versions of server.
------------------------------------------------------------
revno: 2617.45.17
committer: Sergei Golubchik <serg@mysql.com>
branch nick: 6.0-maria
timestamp: Wed 2009-05-13 20:08:58 +0200
message:
followup for bug#43138
if delete fails with a permission denied error, we want to show it
------------------------------------------------------------
The patch was backported to 5.1 in scope of Bug#42364 by
the following revision:
------------------------------------------------------------
revno: 2497.975.3
committer: Sergey Glukhov <Sergey.Glukhov@sun.com>
branch nick: mysql-5.1-bugteam
timestamp: Fri 2009-07-03 13:22:06 +0500
message:
Bug#42364 SHOW ERRORS returns empty resultset after dropping non existent table
enabled message storing into error message list
for 'drop table' command
------------------------------------------------------------
