not every index-using plan sets bits in table->quick_keys.
QUICK_ROR_INTERSECT_SELECT, for example, doesn't.
Use the fact that select->quick is set instead.
Also allow EXPLAIN to work.
- Handle stored function conditions correctly, with the same logic as with UDFs.
- When running queries on Spider SE, by default, we do not push down WHERE conditions containing usage of UDFs/stored functions to remote data nodes, unless the user demands (by setting spider_use_pushdown_udf).
- Disable direct update/delete when a udf condition is skipped.
in about a hundred of users of MY_BITMAP, only two were using its
built-in mutex, and only one of those two was actually needing it.
Remove the mutex from MY_BITMAP, remove all associated conditions
and checks in bitmap functions. Use an external LOCK_temp_pool
mutex and temp_pool_set_next/temp_pool_clear_bit acccessors.
Remove bitmap_init/bitmap_free, always use my_* versions.
The columns that are part of DEFAULT expression were not read-marked
in statements like UPDATE...SET b=DEFAULT.
The problem is `F(DEFAULT)` expression depends of the left-hand side of an
assignment. However, setup_fields accepts only right-hand side value.
Neither Item::fix_fields does.
Suchwise, b=DEFAULT(b) works fine, because Item_default_field has
information on what field it is default of:
if (thd->mark_used_columns != MARK_COLUMNS_NONE)
def_field->default_value->expr->update_used_tables();
in Item_default_value::fix_fields().
It is not reasonable to pass a left-hand side to Item:fix_fields, because
the case is rare, so the rewrite
b= F(DEFAULT) -> b= F(DEFAULT(b))
is made instead.
Both UPDATE and multi-UPDATE are affected, however any form of INSERT
is not: it marks all the fields in DEFAULT expressions for read in
TABLE::mark_default_fields_for_write().
Reformulate mark_columns_used_by_index* function family in a more laconic
way:
mark_columns_used_by_index -> mark_index_columns
mark_columns_used_by_index_for_read_no_reset -> mark_index_columns_for_read
mark_columns_used_by_index_no_reset -> mark_index_columns_no_reset
static mark_index_columns -> do_mark_index_columns
Both EXPLAIN and EXPLAIN EXTENDED statements produce different results set
in case it is run in normal way and in PS mode for the statements
UPDATE/DELETE with subquery.
The use case below reproduces the issue:
MariaDB [test]> CREATE TABLE t1 (c1 INT KEY) ENGINE=MyISAM;
Query OK, 0 rows affected (0,128 sec)
MariaDB [test]> CREATE TABLE t2 (c2 INT) ENGINE=MyISAM;
Query OK, 0 rows affected (0,023 sec)
MariaDB [test]> CREATE TABLE t3 (c3 INT) ENGINE=MyISAM;
Query OK, 0 rows affected (0,021 sec)
MariaDB [test]> EXPLAIN EXTENDED UPDATE t3 SET c3 =
-> ( SELECT COUNT(d1.c1) FROM ( SELECT a11.c1 FROM t1 AS a11
-> STRAIGHT_JOIN t2 AS a21 ON a21.c2 = a11.c1 JOIN t1 AS a12
-> ON a12.c1 = a11.c1 ) d1 );
+------+-------------+-------+------+---------------+------+---------+------+------+----------+--------------------------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | filtered | Extra |
+------+-------------+-------+------+---------------+------+---------+------+------+----------+--------------------------------+
| 1 | PRIMARY | t3 | ALL | NULL | NULL | NULL | NULL | 0 | 100.00 | |
| 2 | SUBQUERY | NULL | NULL | NULL | NULL | NULL | NULL | NULL | NULL | Impossible WHERE noticed after reading const tables
+------+-------------+-------+------+---------------+------+---------+------+------+----------+--------------------------------+
2 rows in set (0,002 sec)
MariaDB [test]> PREPARE stmt FROM
-> EXPLAIN EXTENDED UPDATE t3 SET c3 =
-> ( SELECT COUNT(d1.c1) FROM ( SELECT a11.c1 FROM t1 AS a11
-> STRAIGHT_JOIN t2 AS a21 ON a21.c2 = a11.c1 JOIN t1 AS a12
-> ON a12.c1 = a11.c1 ) d1 );
Query OK, 0 rows affected (0,000 sec)
Statement prepared
MariaDB [test]> EXECUTE stmt;
+------+-------------+-------+------+---------------+------+---------+------+------+----------+--------------------------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | filtered | Extra |
+------+-------------+-------+------+---------------+------+---------+------+------+----------+--------------------------------+
| 1 | PRIMARY | t3 | ALL | NULL | NULL | NULL | NULL | 0 | 100.00 | |
| 2 | SUBQUERY | NULL | NULL | NULL | NULL | NULL | NULL | NULL | NULL | no matching row in const table |
+------+-------------+-------+------+---------------+------+---------+------+------+----------+--------------------------------+
2 rows in set (0,000 sec)
The reason by that different result sets are produced is that on execution
of the statement 'EXECUTE stmt' the flag SELECT_DESCRIBE not set
in the data member SELECT_LEX::options for instances of SELECT_LEX that
correspond to subqueries used in the UPDTAE/DELETE statements.
Initially, these flags were set on parsing the statement
PREPARE stmt FROM "EXPLAIN EXTENDED UPDATE t3 SET ..."
but latter they were reset before starting real execution of
the parsed query during handling the statement 'EXECUTE stmt';
So, to fix the issue the functions mysql_update()/mysql_delete()
have been modified to set the flag SELECT_DESCRIBE forcibly
in the data member SELECT_LEX::options for the primary SELECT_LEX
of the UPDATE/DELETE statement.
The ROWNUM() function is for SELECT mapped to JOIN->accepted_rows, which is
incremented for each accepted rows.
For Filesort, update, insert, delete and load data, we map ROWNUM() to
internal variables incremented when the table is changed.
The connection between the row counter and Item_func_rownum is done
in sql_select.cc::fix_items_after_optimize() and
sql_insert.cc::fix_rownum_pointers()
When ROWNUM() is used anywhere in query, the optimization to ignore ORDER
BY in sub queries are disabled. This was done to get the following common
Oracle query to work:
select * from (select * from t1 order by a desc) as t where rownum() <= 2;
MDEV-3926 "Wrong result with GROUP BY ... WITH ROLLUP" contains a discussion
about this topic.
LIMIT optimization is enabled when in a top level WHERE clause comparing
ROWNUM() with a numerical constant using any of the following expressions:
- ROWNUM() < #
- ROWNUM() <= #
- ROWNUM() = 1
ROWNUM() can be also be the right argument to the comparison function.
LIMIT optimization is done in two cases:
- For the current sub query when the ROWNUM comparison is done on the top
level:
SELECT * from t1 WHERE rownum() <= 2 AND t1.a > 0
- For an inner sub query, when the upper level has only a ROWNUM comparison
in the WHERE clause:
SELECT * from (select * from t1) as t WHERE rownum() <= 2
In Oracle mode, one can also use ROWNUM without parentheses.
Other things:
- Fixed bug where the optimizer tries to optimize away sub queries
with RAND_TABLE_BIT set (non-deterministic queries). Now these
sub queries will not be converted to joins. This bug fix was also
needed to get rownum() working inside subqueries.
- In remove_const() remove setting simple_order to FALSE if ROLLUP is
USED. This code was disable a long time ago because of wrong assignment
in the following code. Instead we set simple_order to false if
RAND_TABLE_BIT was used in the SELECT list. This ensures that
we don't delete ORDER BY if the result set is not deterministic, like
in 'SELECT RAND() AS 'r' FROM t1 ORDER BY r';
- Updated parameters for Sort_param::init_for_filesort() to be able
to provide filesort with information where the number of accepted
rows should be stored
- Reordered fields in class Filesort to optimize storage layout
- Added new error messsage to tell that a function can't be used in HAVING
- Added field 'with_rownum' to THD to mark that ROWNUM() is used in the
query.
Co-author: Oleksandr Byelkin <sanja@mariadb.com>
LIMIT optimization for sub query
This commits replaces the call of the function setup_tables() with
a call of the function setup_tables_and_check_access() in the method
Multiupdate_prelocking_strategy::handle_end().
There is no known bug that would require this change. However the change
aligns this piece of code with the code existed before the patch for
MDEV-24823.
Before this patch mergeable derived tables / view used in a multi-table
update / delete were merged before the preparation stage.
When the merge of a derived table / view is performed the on expression
attached to it is fixed and ANDed with the where condition of the select S
containing this derived table / view. It happens after the specification of
the derived table / view has been merged into S. If the ON expression refers
to a non existing field an error is reported and some other mergeable derived
tables / views remain unmerged. It's not a problem if the multi-table
update / delete statement is standalone. Yet if it is used in a stored
procedure the select with incompletely merged derived tables / views may
cause a problem for the second call of the procedure. This does not happen
for select queries using derived tables / views, because in this case their
specifications are merged after the preparation stage at which all ON
expressions are fixed.
This patch makes sure that merging of the derived tables / views used in a
multi-table update / delete statement is performed after the preparation
stage.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
Before this patch mergeable derived tables / view used in a multi-table
update / delete were merged before the preparation stage.
When the merge of a derived table / view is performed the on expression
attached to it is fixed and ANDed with the where condition of the select S
containing this derived table / view. It happens after the specification of
the derived table / view has been merged into S. If the ON expression refers
to a non existing field an error is reported and some other mergeable derived
tables / views remain unmerged. It's not a problem if the multi-table
update / delete statement is standalone. Yet if it is used in a stored
procedure the select with incompletely merged derived tables / views may
cause a problem for the second call of the procedure. This does not happen
for select queries using derived tables / views, because in this case their
specifications are merged after the preparation stage at which all ON
expressions are fixed.
This patch makes sure that merging of the derived tables / views used in a
multi-table update / delete statement is performed after the preparation
stage.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
If a multi-update query was killed because of timeout or a kill statement,
there was a chance the query returned the error "An error occurred in
multi-table update" instead of the right error, like
"Query execution was interrupted".
Cause: no table->update_handler cloned at the moment of
vers_insert_history_row(). update_handler is needed because there
can't be several inited indexes at once in the same handler. First
index is inited by QUICK_RANGE_SELECT::reset(). Then when history row
is inserted check_duplicate_long_entry_key() is done and it requires
another index.
through 2nd execution of SP
This bug caused a server crash on the second call of any stored procedure
that contained an UPDATE statement over a multi-table view reporting an
error message at the prepare stage.
On the first call of the stored procedure after reporting an error at
the preparation stage of the UPDATE statement finished without calling
the function SELECT_LEX::save_prep_leaf_tables() for the SELECT used as
the definition of the view. This left the SELECT_LEX structure used by
the UPDATE statement in an inconsistent state for second call of the stored
procedure.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
Add history row outside of compare_record() check. For TRX_ID
versioning we have to fail can_compare_record to force InnoDB update
which adds history row; and there in ha_innobase::update_row() is
additional "row changed" check where we force history row anyway.
in queries like
create view v1 as select 2 like 1 escape (3 in (select 0 union select 1));
select 2 union select * from v1;
Item_func_like::escape was left uninitialized, because
Item_in_optimizer is const_during_execution()
but not actually const_item() during execution.
It's not, because const subquery evaluation was disabled for derived.
Practically it only needs to be disabled for multi-update
that runs fix_fields() before all tables are locked.
For debug build of MariaDB server running of the following test case
will hit the assert `thd->lex->sql_command == SQLCOM_UPDATE' in the function
check_fields() on attempt to execute the UPDATE statement.
CREATE TABLE t1 (a INT);
UPDATE t1 FOR PORTION OF APPTIME FROM (SELECT 1 FROM t1) TO 2 SET a = 1;
Stack trace to the fired assert statement
DBUG_ASSERT(thd->lex->sql_command == SQLCOM_UPDATE)
listed below:
mysql_execute_command() ->
mysql_multi_update_prepare() -->
Multiupdate_prelocking_strategy::handle_end() -->
check_fiels()
It's worth to note that this stack trace looks like a multi update
statement is being executed. The fired assert is checked inside the
function check_fields() in case table->has_period() returns the value
true that in turns happens when temporal period specified in the UPDATE
statement. Condition specified in the DEBUG_ASSERT statement returns
the false value since the data member thd->lex->sql_command have the
value SQLCOM_UPDATE_MULTI. So, the main question is why a program control
flow go to the path prescribed for handling MULTI update statement
despite of the fact that the ordinary UPDATE statement being executed.
The answer is a way that SQL grammar rules written.
When the statement
UPDATE t1 FOR PORTION OF APPTIME FROM (SELECT 1 FROM t1) TO 2 SET a = 1;
being parsed an action for the rule 'table_primary_ident' (part of this action
is listed below to simplify description) is invoked to handle the table
name 't1' specified in the clause 'SELECT 1 FROM t1'.
table_primary_ident:
table_ident opt_use_partition opt_for_system_time_clause
opt_table_alias_clause opt_key_definition
{
SELECT_LEX *sel= Select;
sel->table_join_options= 0;
if (!($$= Select->add_table_to_list(thd, $1, $4,
This action calls the method st_select_lex::add_table_to_list()
to add the table name 't1' to the list of tables being used by the statement.
Later, an action for the following grammar rule
update_table_list:
table_ident opt_use_partition for_portion_of_time_clause
opt_table_alias_clause opt_key_definition
{
SELECT_LEX *sel= Select;
sel->table_join_options= 0;
if (!($$= Select->add_table_to_list(thd, $1, $4,
is invoked to handle the clause 't1 FOR PORTION OF APPTIME FROM ... TO 2'.
This action also calls the method st_select_lex::add_table_to_list()
to add the table name 't1' to the list of tables being used by the statement.
In result the table name 't1' contained twice in this list.
Presence of duplicate names for the table 't1' in a list of table used by
a statement leads to the fact that the function unique_table() called
from the function mysql_update() returns the value true that forces
implementation of the function mysql_update() to return the value 2 as
a signal to fall through the case boundary of the switch statement placed
in the function mysql_execute_statement() and start handling of the case
for sql_command SQLCOM_UPDATE_MULTI. The compound statement block for the
case SQLCOM_UPDATE_MULTI invokes the function mysql_multi_update_prepare()
that executes the statement
set thd->lex->sql_command= SQLCOM_UPDATE_MULTI;
and after that calls the method
Multiupdate_prelocking_strategy::handle_end(). Finally, this method
invokes the check_field() function and assert is fired.
The above analysis shows that update for a table that simultaneously specified
both as a destination table of UPDATE statement and as a table taking part in
subquery is actually treated by MariaDB server as multi-update statement.
Taking into account that multi-update statement for temporal period
table is not supported yet by MariaDB, correct way to fix the bug is to return
the error ER_NOT_SUPPORTED_YET for this case.
is_bulk_op())' fails on UPDATE on a partitioned table with subquery
(MySQL:71630)
Analysis and fix: Error is not checked. So correct error state is not returned.
Fix: Check for error and return the error state.
Fixed by:
- Make all quick_* variable allocated according to real number keys instead
of MAX_KEY
- Store all the quick* items in separated allocated structure (OPT_RANGE)
- Ensure we don't access any quick* variable without first checking
opt_range_keys.is_set(). Thanks to this, we don't need any
pre-initialization of quick* variables anymore.
Some renames was done to use the new structure:
table->quick_keys -> table->opt_range_keys
table->quick_rows[X] -> table->opt_range[X].rows
table->quick_key_parts[X] -> table->opt_range[X].key_parts
table->quick_costs[X] -> table->opt_range[X].cost
table->quick_index_only_costs[X] -> table->opt_range[X].index_only_cost
table->quick_n_ranges[X] -> table->opt_range[X].ranges
table->quick_condition_rows -> table->opt_range_condition_rows
This patch should both decrease memory needed for TABLE objects
(3528 -> 984 + keyinfo) and increase performance, thanks to less
initializations per query, and more localized memory, thanks to the
opt_range structure.
MDEV-22531 Remove maria::implicit_commit()
MDEV-22607 Assertion `ha_info->ht() != binlog_hton' failed in
MYSQL_BIN_LOG::unlog_xa_prepare
From the handler point of view, Aria now looks like a transactional
engine. One effect of this is that we don't need to call
maria::implicit_commit() anymore.
This change also forces the server to call trans_commit_stmt() after doing
any read or writes to system tables. This work will also make it easier
to later allow users to have system tables in other engines than Aria.
To handle the case that Aria doesn't support rollback, a new
handlerton flag, HTON_NO_ROLLBACK, was added to engines that has
transactions without rollback (for the moment only binlog and Aria).
Other things
- Moved freeing of MARIA_SHARE to a separate function as the MARIA_SHARE
can be still part of a transaction even if the table has closed.
- Changed Aria checkpoint to use the new MARIA_SHARE free function. This
fixes a possible memory leak when using S3 tables
- Changed testing of binlog_hton to instead test for HTON_NO_ROLLBACK
- Removed checking of has_transaction_manager() in handler.cc as we can
assume that as the transaction was started by the engine, it does
support transactions.
- Added new class 'start_new_trans' that can be used to start indepdendent
sub transactions, for example while reading mysql.proc, using help or
status tables etc.
- open_system_tables...() and open_proc_table_for_Read() doesn't anymore
take a Open_tables_backup list. This is now handled by 'start_new_trans'.
- Split thd::has_transactions() to thd::has_transactions() and
thd::has_transactions_and_rollback()
- Added handlerton code to free cached transactions objects.
Needed by InnoDB.
squash! 2ed35999f2a2d84f1c786a21ade5db716b6f1bbc
All changes (except one) is of type
thd->transaction. -> thd->transaction->
thd->transaction points by default to 'thd->default_transaction'
This allows us to 'easily' have multiple active transactions for a
THD object, like when reading data from the mysql.proc table
In main.index_merge_myisam we remove the test that was added in
commit a2d24def8c because
it duplicates the test case that was added in
commit 5af12e4635.
`inited == NONE` at the initialization time does not always mean
that it'll be `NONE` later, at the execution time. Use a more complex
caller-specific logic to decide whether to create a cloned lookup handler.
Besides LOAD (as in the original bug report) make sure that all
prepare_for_insert() invocations are covered by tests. Add tests for
CREATE ... SELECT, multi-UPDATE, and multi-DELETE.
Don't enable write cache with long uniques.
Turn read cache off for periodic update.
Like 498a96a4 says:
Aria with row_format=fixed uses IO_CACHE of type READ_CACHE for
sequential read in update loop. When history row is inserted inside
this loop the cache misses it and fails with error.
This applicable to any additional row inserts on UPDATE. In this case
it was initiated by UPDATE FOR PORTION.
Related to MDEV-20441.
Cause
Join tmp table inserts null row because of OUTER JOIN, that's
expected. Since `multi_update::prepare2()` converted
`Item_temptable_rowid` into `Item_field` (28dbdf3)
`multi_update::send_data()` accesses join tmp record directly and
treats it as a normal row ignoring null status of ref field. NULL ref
field is then treated as normal in `multi_update::do_updates()` which
tries to position updated table by reference 0.
Note that reference 0 may be valid reference and the first row of
table can be wrongly updated (see multi_update.test).
Fix
Do not add row into multi-update tmp table in case of null ref
field. Join tmp table does not have null_row status at this time (as
well as `STATUS_NULL_ROW`) and cannot be skipped by these properties
(see first comment in multi_update::send_data()). But it has all null
fields (including the ref field).
* rename to a generic name
* move remaning initializations from query exec to prepare time
* simplify/unify key handling in open_table_from_share and delayed
* remove dead code
* move tests where they belong
This was done to both simplify the code and also to be easier to handle
storage engines that are clustered on some other index than the primary
key.
As pk_is_clustering_key() and is_clustering_key now are using only
index_flags, these where removed from all storage engines.
MDEV-21606 Improve update handler (long unique keys on blobs)
MDEV-21470 MyISAM and Aria start_bulk_insert doesn't work with long unique
MDEV-21606 Bug fix for previous version of this code
MDEV-21819 2 Assertion `inited == NONE || update_handler != this'
- Move update_handler from TABLE to handler
- Move out initialization of update handler from ha_write_row() to
prepare_for_insert()
- Fixed that INSERT DELAYED works with update handler
- Give an error if using long unique with an autoincrement column
- Added handler function to check if table has long unique hash indexes
- Disable write cache in MyISAM and Aria when using update_handler as
if cache is used, the row will not be inserted until end of statement
and update_handler would not find conflicting rows.
- Removed not used handler argument from
check_duplicate_long_entries_update()
- Syntax cleanups
- Indentation fixes
- Don't use single character indentifiers for arguments
Wrong assertion condition. SYSTEM_TIME_ALL indicates that
vers_setup_conds() is done. In case FOR SYSTEM_TIME ALL is specified
in command the assertion passes but not checks anything.
Turn read cache off for update and multi-update for versioned
table. no_cache is reinited on each TABLE open because it is
applicable for specific algorithms.
As a side fix vers_insert_history_row() honors vers_write setting.
Aria with row_format=fixed uses IO_CACHE of type READ_CACHE for
sequential read in update loop. When history row is inserted inside
this loop the cache misses it and fails with error.
TODO:
Currently maria_extra() does not support SEQ_READ_APPEND. Probably it
might be possible to use this type of cache.
MDEV-18957 UPDATE with LIMIT clause is wrong for versioned partitioned tables
UPDATE, DELETE: replace linear search of current/historical records
with vers_setup_conds().
Additional DML cases in view.test
Count the "gap" time between table accesses and display it as
r_other_time_ms in the "table" element.
* The advantage of this approach is that it doesn't add any new
my_timer_cycles() calls.
* The disadvantage is that the definition of what is done during
"other time" is not that clear: it includes checking the WHERE
(for this table), constructing index lookup tuple (for the next table)
writing to GROUP BY temporary table (as we dont account for that time
separately [yet], etc)
- Any temporary tables created under read-only mode will never be logged
to binary log. Any usage of these tables to update normal tables, even
after read-only has been disabled, will use row base logging (as the
temporary table will not be on the slave).
- Analyze, check and repair table will not be logged in read-only mode.
Other things:
- Removed not used varaibles in
MYSQL_BIN_LOG::flush_and_set_pending_rows_event.
- Set table_share->table_creation_was_logged for all normal tables.
- THD::binlog_query() now returns -1 if statement was not logged., This
is used to update table_share->table_creation_was_logged.
- Don't log admin statements in opt_readonly is set.
- Table's that doesn't have table_creation_was_logged will set binlog format to row
logging.
- Removed not needed/wrong setting of table->s->table_creation_was_logged
in create_table_from_items()
because internally setup_wild() adjusts select_lex->with_wild directly
anyway, so there is no reason to pretend that the number of '*' may be
anything else but select_lex->with_wild
And don't update select_lex->item_list, because fields can come
from anywhere and don't necessarily have to be copied into select_lex.
Three issues here:
* ON UPDATE DEFAULT NOW columns were updated after generated columns
were computed - this broke indexed virtual columns
* ON UPDATE DEFAULT NOW columns were updated after BEFORE triggers,
so triggers didn't see the correct NEW value
* in case of a multi-update generated columns were also updated
after BEFORE triggers
on UPDATE, compare_record() was comparing all columns that are marked
for writing. But generated columns that are written to the table are
always deterministic and cannot change unless normal non-generated
columns were changed. So it's enough to compare only non-generated
columns that were explicitly assigned values in the SET clause.
* remove one level of virtual functions
* remove redundant checks
* remove an if() as the value is always known at compilation time
don't pretend that "DEFAULT expr" and "ON UPDATE DEFAULT NOW"
are "basically the same thing"
as well as
MDEV-19500 Update with join stopped worked if there is a call to a procedure in a trigger
MDEV-19521 Update Table Fails with Trigger and Stored Function
MDEV-19497 Replication stops because table not found
MDEV-19527 UPDATE + JOIN + TRIGGERS = table doesn't exists error
Reimplement the fix for (5d510fdbf0)
MDEV-18507 can't update temporary table when joined with table with triggers on read-only
instead of calling open_tables() twice, put multi-update
prepare code inside open_tables() loop.
Add a test for a MDL backoff-and-retry loop inside open_tables()
across multi-update prepare code.
triggers are opened and tables used in triggers are prelocked in
open_tables(). But multi-update can detect what tables will actually
be updated only later, after all main tables are opened.
Meaning, if a table is used in multi-update, but is not actually updated,
its on-update treggers will be opened and tables will be prelocked,
even if it's unnecessary. This can cause more tables to be
write-locked than needed, causing read_only errors, privilege errors
and lock waits.
Fix: don't open/prelock triggers unless table->updating is true.
In multi-update after setting table->updating=true, do a second
open_tables() for newly added tables, if any.
it always required UPDATE privilege on views, not being able to detect
when a views was not actually updated in multi-update.
fix: instead of marking all tables as "updating" by default,
only set "updating" on tables that will actually be updated
by multi-update. And mark the view "updating" if any of the
view's tables is.
For single table updates and multi-table updates , engine independent statistics were not being
read even if the statistics were collected.
Fixed it, so when the optimizer_use_condition_selectivity > 2 then we would read the available
statistics for update queries.
The main problem was lack of proper QueryArena handling in
`period_setup_conds`. Since mysql_prepare_update/mysql_prepare_delete
are called during `PREPARE` statement, period conditions, should be
allocated on statement query arena.
Another problem is incorrect statement state handling in
period_setup_conds, which led to unexpected mysql_update termination.
* mysql_update: move period_setup_conds() to mysql_prepare_update to
store conditions in statement's mem_root
* mtr: add period suite to default list, since --ps-protocol is now
fixed
Fixes bugs:
MDEV-18853 Assertion `0' failed in Protocol::end_statement upon DELETE .. FOR PORTION via prepared statement
MDEV-18852 Server crashes in reinit_stmt_before_use upon UPDATE .. FOR PORTION via prepared statement
close table->update_handler in close_thread_tables().
it's not enough to do it in sql_update.cc only, because
sql_insert.cc can also do updates (REPLACE) and even
sql_delete.cc can (DELETE ... FOR PORTION OF)
This patch implements engine independent unique hash index.
Usage:- Unique HASH index can be created automatically for blob/varchar/test column whose key
length > handler->max_key_length()
or it can be explicitly specified.
Automatic Creation:-
Create TABLE t1 (a blob unique);
Explicit Creation:-
Create TABLE t1 (a int , unique(a) using HASH);
Internal KEY_PART Representations:-
Long unique key_info will have 2 representations.
(lets understand this with an example create table t1(a blob, b blob , unique(a, b)); )
1. User Given Representation:- key_info->key_part array will be similar to what user has defined.
So in case of example it will have 2 key_parts (a, b)
2. Storage Engine Representation:- In this case there will be only one key_part and it will point to
HASH_FIELD. This key_part will be always after user defined key_parts.
So:- User Given Representation [a] [b] [hash_key_part]
key_info->key_part ----^
Storage Engine Representation [a] [b] [hash_key_part]
key_info->key_part ------------^
Table->s->key_info will have User Given Representation, While table->key_info will have Storage Engine
Representation.Representation can be changed into each other by calling re/setup_keyinfo_hash function.
Working:-
1. So when user specifies HASH_INDEX or key_length is > handler->max_key_length(), In mysql_prepare_create_table
One extra vfield is added (for each long unique key). And key_info->algorithm is set to HA_KEY_ALG_LONG_HASH.
2. In init_from_binary_frm_image values for hash_keypart is set (like fieldnr , field and flags)
3. In parse_vcol_defs, HASH_FIELD->vcol_info is created. Item_func_hash is used with list of Item_fields,
When Explicit length is given by user then Item_left is used to concatenate Item_field values.
4. In ha_write_row/ha_update_row check_duplicate_long_entry_key is called which will create the hash key from
table->record[0] and then call ha_index_read_map , if we found duplicated hash , we will compare the result
field by field.
