Without the call to my_mutex_init, the mutex attributes
my_fast_mutexattr and my_errorcheck_mutexattr are uninitialized.
Linux tolerates this but FreeBSD doesn't (and segfaults).
We fix for all since the unit text should be testing the
standard mutexes of the system.
MySQL-Connector-Net casts SEQ_IN_INDEX to uint and will
raise an exception if the type is a System.Int64.
As we don't support a huge number of multi-columns in
an index reducing to a uint is sufficient to represent
all values and maintain compatibility with MySQL-Connector-Net.
This matches the type (uint) returned by MySQL-8.3 and 8.0.
Reviewer: Alexander Barkov <bar@mariadb.com>
It's possible that MDL conflict handling code is called more
than once for a transaction when:
- it holds more than one conflicting MDL lock
- reschedule_waiters() is executed,
which results in repeated attempts to BF-abort already aborted
transaction.
In such situations, it might be that BF-aborting logic sees
a partially rolled back transaction and erroneously decides
on future actions for such a transaction.
The specific situation tested and fixed is when a SR transaction
applied in the node gets BF-aborted by a started TOI operation.
It's then caught with the server transaction already rolled back,
but with no MDL locks yet released. This caused wrong state
detection for such a transaction during repeated MDL conflict
handling code execution.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
* Fixes galera.galera_bf_kill_debug test case.
* Enable galera_ssl_upgrade, galera_ssl_reload, galera_pc_bootstrap
* Add MDEV to disabled tests that miss it
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Based on logs SST was started before donor reached
Primaty state. Add wait_conditions to make sure that
nodes reach Primary state before starting next node.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
For TOI events specifically we have a situation where in case of the
same error different nodes may generate different messages. This may
be for two reasons:
- different locale setting between the current client session and
server default (we can reasonably require server locales to be
identical on all nodes, but user can change message locale for the
session)
- non-deterministic course of STATEMENT execution e.g. for ALTER TABLE
On the other hand we may reasonably expect TOI event failures since
they are executed after replication, so we must ensure that voting is
consistent. For that purpose error codes should be sufficiently unique
and deterministic for TOI event failures as DDLs normally deal with
a single object, so we can merely use MySQL error codes to vote on.
Notice that this problem does not happen with regular transactional
writesets, since the originator node will always vote success and
replica nodes are assumed to have the same global locale setting.
As such different error messages indicate different errors even if
the error code is the same (e.g. ER_DUP_KEY can happen on different
rows tables).
Use only MySQL error code (without the error message) for error voting
in case of TOI event failure.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
When handling fatal signal, shut down Galera networking
before printing out stack trace and writing core file.
This is to achieve fail-silent semantics on crashes which may
keep the process running for a long time, but not fully responding
e.g. due to core dumping or symbol resolving.
Also suppress all Galera/wsrep logging to avoid logging from
background threads to garble crash information from signal handler.
Notice that for fully fail-silent crash, Galera 26.4.19 is needed.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Problem was that wsrep_schema tables were not marked as
category information. Fix allows access to wsrep_schema
tables even when node is detached.
This is 10.4-10.9 version of fix.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Problem was that we did not found that table was partitioned
and then we should find what is actual underlaying storage
engine.
We should not use RSU for !InnoDB tables.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
recv_recovery_from_checkpoint_start(): Abort startup due to log
corruption if we were unable to parse the entire log between
the latest log checkpoint and the corresponding FILE_CHECKPOINT record.
Also, reduce some code bloat related to log output and log_sys.mutex.
Reviewed by: Debarun Banerjee
The test was expecting the I/O thread to be in a specific state, but thread
scheduling may cause it to not yet have reached that state. So just have a
loop that waits for the expected state to occur.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Remove the test for MDEV-14528. This is supposed to test that parallel
replication from pre-10.0 master will update Seconds_Behind_Master. But
after MDEV-12179 the SQL thread is blocked from even beginning to fetch
events from the relay log due to FLUSH TABLES WITH READ LOCK, so the test
case is no longer testing what is was intended to. And pre-10.0 versions are
long since out of support, so does not seem worthwhile to try to rewrite the
test to work another way.
The root cause of the test failure is MDEV-34778. Briefly, depending on
exact timing during slave stop, the rli->sql_thread_caught_up flag may end
up with different value. If it ends up as "true", this causes
Seconds_Behind_Master to be 0 during next slave start; and this caused test
case timeout as the test was waiting for Seconds_Behind_Master to become
non-zero.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Depending on timing, an extra event run could start just when the event
scheduler is shut down and delay running until after the table has been
dropped; this would cause the test to fail with a "table does not exist"
error in the log.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Before doing mark_start_commit(), check that there is no pending deadlock
kill. If there is a pending kill, we won't commit (we will abort, roll back,
and retry). Then we should not mark the commit as started, since that could
potentially make the following GCO start too early, before we completed the
commit after the retry.
This condition could trigger in some corner cases, where InnoDB would take
temporarily table/row locks that are released again immediately, not held
until the transaction commits. This happens with dict_stats updates and
possibly auto-increment locks.
Such locks can be passed to thd_rpl_deadlock_check() and cause a deadlock
kill to be scheduled in the background. But since the blocking locks are
held only temporarily, they can be released before the background kill
happens. This way, the kill can be delayed until after mark_start_commit()
has been called. Thus we need to check the synchronous indication
rgi->killed_for_retry, not just the asynchroneous thd->killed.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
One cause of the slowdown is because the ftruncate call can be much
slower on some systems. ftruncate() is called by Aria for internal
temporary tables, tables created by the optimizer, when the upper level
asks Aria to delete the previous result set. This is needed when some
content from previous tables changes.
I have now changed Aria so that for internal temporary tables we don't
call ftruncate() anymore for maria_delete_all_rows().
I also had to update the Aria repair code to use the logical datafile
size and not the on-disk datafile size, which may contain data from a
previous result set. The repair code is called to create indexes for
the internal temporary table after it is filled.
I also replaced a call to mysql_file_size() with a pwrite() in
_ma_bitmap_create_first().
Reviewer: Sergei Petrunia <sergey@mariadb.com>
Tester: Dave Gosselin <dave.gosselin@mariadb.com>
In commit 232d7a5e2d we almost got
the detection logic right. However, the XGETBV instruction would
crash if Linux was started up with the option noxsave.
have_vpclmulqdq(): Check for the XSAVE flag at the correct position
and also for the AVX flag.
This was tested on Ubuntu 22.04 by starting up its Linux 5.15 kernel
with and without the noxsave option.
The original code is correct.
valgrind and asan binaries should be built with a specialiced version of
mem_root that makes it easier to find memory overwrites.
This is what the BUILD scripts is doing.
The specialiced mem_root code allocates a new block for every allocation
which is visiable for any test that depenmds on the default original malloc
size and usage.
Running an UPDATE statement in PS mode and having positional
parameter(s) bound with an array of actual values (that is
prepared to be run in bulk mode) results in incorrect behaviour
in presence of on update trigger that also executes an UPDATE
statement. The same is true for handling a DELETE statement in
presence of on delete trigger. Typically, the visible effect of
such incorrect behaviour is expressed in a wrong number of
updated/deleted rows of a target table. Additionally, in case UPDATE
statement, a number of modified rows and a state message returned
by a statement contains wrong information about a number of modified rows.
The reason for incorrect number of updated/deleted rows is that
a data structure used for binding positional argument with its
actual values is stored in THD (this is thd->bulk_param) and reused
on processing every INSERT/UPDATE/DELETE statement. It leads to
consuming actual values bound with top-level UPDATE/DELETE statement
by other DML statements used by triggers' body.
To fix the issue, reset the thd->bulk_param temporary to the value
nullptr before invoking triggers and restore its value on finishing
its execution.
The second part of the problem relating with wrong value of affected
rows reported by Connector/C API is caused by the fact that diagnostics
area is reused by an original DML statement and a statement invoked
by a trigger. This fact should be take into account on finalizing a
state of diagnostics area on completion running of a statement.
Important remark: in case the macros DBUG_OFF is on, call of the method
Diagnostics_area::reset_diagnostics_area()
results in reset of the data members
m_affected_rows, m_statement_warn_count.
Values of these data members of the class Diagnostics_area are used on
sending OK and EOF messages. In case DML statement is executed in PS bulk
mode such resetting results in sending wrong result values to a client
for affected rows in case the DML statement fires a triggers. So, reset
these data members only in case the current statement being processed
is not run in bulk mode.
- Added plugin_debug.test, multiple_index.test to innodb_fts suite
from mysql-5.7.
- commit c5b28e55f6 removes the warning
for InnoDB rebuilding table to add FTS_DOC_ID
- multiple_index test case has MATCH(a) values are smaller
than in MySQL because ROLLBACK updates the stat_n_rows.
- st_mysql_ftparser_boolean_info structure conveys boolean
metadata to mysql search engine for every word in the query.
This structure misses the position value to store the correct
offset of every word. So phrase search queries in plugin_debug
test case with boolean mode for simple parser throws
wrong result.
With wsrep_sst_rsync, node goes into endless loop when trying
to establish connection to donor for IST/SST if the database
is bind on specific IP address, not the "*".
This commit fixes this problem. Separate tests are not
required - the problem can occur in normal configurations
on a number of systems when selecting a bing address other
than "*", especially on FreeBSD and with the IPv6 addresses.
int wsrep_thd_append_key(THD*, const wsrep_key*, int, Wsrep_service_key_type)
CREATE TABLE [SELECT|REPLACE SELECT] is CTAS and idea was that
we force ROW format. However, it was not correctly enforced
and keys were appended before wsrep transaction was started.
At THD::decide_logging_format we should force used stmt binlog
format to ROW in CTAS case and produce a warning if used
binlog format was not ROW.
At ha_innodb::update_row we should not append keys similarly
as in ha_innodb::write_row if sql_command is SQLCOM_CREATE_TABLE.
Improved error logging on ::write_row, ::update_row and ::delete_row
if wsrep key append fails.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
A mixture of a multi-byte *TEXT column and a short binary column
produced a too large column.
For example, COALESCE(tinytext_utf8mb4, short_varbinary)
produced a BLOB column instead of an expected TINYBLOB.
- Adding a virtual method Type_all_attributes::character_octet_length(),
returning max_length by default.
- Overriding Item_field::character_octet_length() to extract
the octet length from the underlying Field.
- Overriding Item_ref::character_octet_length() to extract
the octet length from the references Item (e.g. as VIEW fields).
- Fixing Type_numeric_attributes::find_max_octet_length() to
take the octet length using the new method character_octet_length()
instead of accessing max_length directly.
