failed for TokuDB engine CREATE TABLE
Analysis: Assertion failure happens because the database doesn't exist to
create the table but ha_tokudb::create() still returns false.
So error is not reported.
Fix: Store the error state and report the error.
The assertion failed in handler::ha_reset upon SELECT under
READ UNCOMMITTED from table with index on virtual column.
This was the debug-only failure, though the problem is mush wider:
* MY_BITMAP is a structure containing my_bitmap_map, the latter is a raw
bitmap.
* read_set, write_set and vcol_set of TABLE are the pointers to MY_BITMAP
* The rest of MY_BITMAPs are stored in TABLE and TABLE_SHARE
* The pointers to the stored MY_BITMAPs, like orig_read_set etc, and
sometimes all_set and tmp_set, are assigned to the pointers.
* Sometimes tmp_use_all_columns is used to substitute the raw bitmap
directly with all_set.bitmap
* Sometimes even bitmaps are directly modified, like in
TABLE::update_virtual_field(): bitmap_clear_all(&tmp_set) is called.
The last three bullets in the list, when used together (which is mostly
always) make the program flow cumbersome and impossible to follow,
notwithstanding the errors they cause, like this MDEV-17556, where tmp_set
pointer was assigned to read_set, write_set and vcol_set, then its bitmap
was substituted with all_set.bitmap by dbug_tmp_use_all_columns() call,
and then bitmap_clear_all(&tmp_set) was applied to all this.
To untangle this knot, the rule should be applied:
* Never substitute bitmaps! This patch is about this.
orig_*, all_set bitmaps are never substituted already.
This patch changes the following function prototypes:
* tmp_use_all_columns, dbug_tmp_use_all_columns
to accept MY_BITMAP** and to return MY_BITMAP * instead of my_bitmap_map*
* tmp_restore_column_map, dbug_tmp_restore_column_maps to accept
MY_BITMAP* instead of my_bitmap_map*
These functions now will substitute read_set/write_set/vcol_set directly,
and won't touch underlying bitmaps.
The assertion failed in handler::ha_reset upon SELECT under
READ UNCOMMITTED from table with index on virtual column.
This was the debug-only failure, though the problem is mush wider:
* MY_BITMAP is a structure containing my_bitmap_map, the latter is a raw
bitmap.
* read_set, write_set and vcol_set of TABLE are the pointers to MY_BITMAP
* The rest of MY_BITMAPs are stored in TABLE and TABLE_SHARE
* The pointers to the stored MY_BITMAPs, like orig_read_set etc, and
sometimes all_set and tmp_set, are assigned to the pointers.
* Sometimes tmp_use_all_columns is used to substitute the raw bitmap
directly with all_set.bitmap
* Sometimes even bitmaps are directly modified, like in
TABLE::update_virtual_field(): bitmap_clear_all(&tmp_set) is called.
The last three bullets in the list, when used together (which is mostly
always) make the program flow cumbersome and impossible to follow,
notwithstanding the errors they cause, like this MDEV-17556, where tmp_set
pointer was assigned to read_set, write_set and vcol_set, then its bitmap
was substituted with all_set.bitmap by dbug_tmp_use_all_columns() call,
and then bitmap_clear_all(&tmp_set) was applied to all this.
To untangle this knot, the rule should be applied:
* Never substitute bitmaps! This patch is about this.
orig_*, all_set bitmaps are never substituted already.
This patch changes the following function prototypes:
* tmp_use_all_columns, dbug_tmp_use_all_columns
to accept MY_BITMAP** and to return MY_BITMAP * instead of my_bitmap_map*
* tmp_restore_column_map, dbug_tmp_restore_column_maps to accept
MY_BITMAP* instead of my_bitmap_map*
These functions now will substitute read_set/write_set/vcol_set directly,
and won't touch underlying bitmaps.
- Some of the bug fixes are backports from 10.5!
- The fix in innobase/fil/fil0fil.cc is just a backport to get less
error messages in mysqld.1.err when running with valgrind.
- Renamed HAVE_valgrind_or_MSAN to HAVE_valgrind
Rowid Filter check is just like Index Condition Pushdown check: before
we check the filter, we must check if we have walked out of the range
we are scanning. (If we did, we should return, and not continue the scan).
Consequences of this:
- Rowid filtering doesn't work for keys that have partially-covered
blob columns (just like Index Condition Pushdown)
- The rowid filter function has three return values: CHECK_POS (passed)
CHECK_NEG (filtered out), CHECK_OUT_OF_RANGE.
All of the above is implemented in this patch
Prototype change:
- virtual ha_rows records_in_range(uint inx, key_range *min_key,
- key_range *max_key)
+ virtual ha_rows records_in_range(uint inx, const key_range *min_key,
+ const key_range *max_key,
+ page_range *res)
The handler can ignore the page_range parameter. In the case the handler
updates the parameter, the optimizer can deduce the following:
- If previous range's last key is on the same block as next range's first
key
- If the current key range is in one block
- We can also assume that the first and last block read are cached!
This can be used for a better calculation of IO seeks when we
estimate the cost of a range index scan.
The parameter is fully implemented for MyISAM, Aria and InnoDB.
A separate patch will update handler::multi_range_read_info_const() to
take the benefits of this change and also remove the double
records_in_range() calls that are not anymore needed.
This was done to both simplify the code and also to be easier to handle
storage engines that are clustered on some other index than the primary
key.
As pk_is_clustering_key() and is_clustering_key now are using only
index_flags, these where removed from all storage engines.
MDEV-19486 and one more similar bug appeared because handler::write_row() interface
welcomes to modify buffer by storage engine. But callers are not ready for that
thus bugs are possible in future.
handler::write_row():
handler::ha_write_row(): make argument const
This patch implements engine independent unique hash index.
Usage:- Unique HASH index can be created automatically for blob/varchar/test column whose key
length > handler->max_key_length()
or it can be explicitly specified.
Automatic Creation:-
Create TABLE t1 (a blob unique);
Explicit Creation:-
Create TABLE t1 (a int , unique(a) using HASH);
Internal KEY_PART Representations:-
Long unique key_info will have 2 representations.
(lets understand this with an example create table t1(a blob, b blob , unique(a, b)); )
1. User Given Representation:- key_info->key_part array will be similar to what user has defined.
So in case of example it will have 2 key_parts (a, b)
2. Storage Engine Representation:- In this case there will be only one key_part and it will point to
HASH_FIELD. This key_part will be always after user defined key_parts.
So:- User Given Representation [a] [b] [hash_key_part]
key_info->key_part ----^
Storage Engine Representation [a] [b] [hash_key_part]
key_info->key_part ------------^
Table->s->key_info will have User Given Representation, While table->key_info will have Storage Engine
Representation.Representation can be changed into each other by calling re/setup_keyinfo_hash function.
Working:-
1. So when user specifies HASH_INDEX or key_length is > handler->max_key_length(), In mysql_prepare_create_table
One extra vfield is added (for each long unique key). And key_info->algorithm is set to HA_KEY_ALG_LONG_HASH.
2. In init_from_binary_frm_image values for hash_keypart is set (like fieldnr , field and flags)
3. In parse_vcol_defs, HASH_FIELD->vcol_info is created. Item_func_hash is used with list of Item_fields,
When Explicit length is given by user then Item_left is used to concatenate Item_field values.
4. In ha_write_row/ha_update_row check_duplicate_long_entry_key is called which will create the hash key from
table->record[0] and then call ha_index_read_map , if we found duplicated hash , we will compare the result
field by field.
