1. default db type for partitions was stored as 1-byte DB_TYPE code,
which doesn't work for dynamically generated codes.
2. storage engine plugin for default db type wasn't locked at all,
which could trivially crash for dynamic plugins.
Now the storage engine name is stored in the extra2 section,
and the plugin is correctly locked.
1. DROP DATABASE should use ha_discover_table_names(), not look at .frm files.
2. filename_to_tablename() also encodes temp file names #sql- -> #mysql50##sql
3. no special treatment for #sql- files, no TABLE_LIST::internal_tmp_table
4. discover also table file names, that start from #
Now whenever we reach the GTID point requested from the slave (when using GTID
position to connect), we send a fake Gtid_list event. This event is used by
the slave to know the current old-style position for MASTER_POS_WAIT(), and
later the similar binlog position for MASTER_GTID_WAIT().
Without this fake event, if the slave is already fully up-to-date with the
master, there may be no events sent at the given position for an indeterminate
time.
If the mysql.gtid_slave_pos table is not available, we cannot load nor update
the current GTID position persistently. This can happen eg. after an upgrade,
before mysql_upgrade_db is run, or if the table is InnoDB and the server is
restarted without the InnoDB storage engine enabled.
Before, replication always failed to start if the table was unavailable. With
this patch, we try to continue with old-style replication, after suitable
complaints in the error log. In strict mode, or if slave is configured to use
GTID, slave still refuses to start.
There was some old code that cleared the position in CHANGE MASTER,
it was forgotten to be removed.
In addition, add code that saves/restores the old-style position
when we nuke the old relay logs as part of GTID slave start.
Normally we will not use these, but it could be useful in case
the GTID connect fails and user wants to go back to the old-style
coordinates.
mysql-test/include/wait_show_condition.inc:
Print failing statement if timeout
mysql-test/r/myisam-metadata.result:
Updated DBUG_SYNC
mysql-test/t/myisam-metadata.test:
Updated DBUG_SYNC.
Removed wait_show_condtion, as this is not needed when we use DBUG_SYNC
This should fix timing issues with the test
mysys/thr_mutex.c:
Added comments
sql/sql_acl.cc:
atoi -> atoll() (Safety)
storage/myisam/ha_myisam.cc:
Send signal before mi_repair_by_sort.
Fix problems related to reconnect. When we need to reconnect (ie. explict
stop/start of just the IO thread by user, or automatic reconnect due to
loosing network connection with the master), it is a bit complex to correctly
resume at the right point without causing duplicate or missing events in the
relay log. The previous code had multiple problems in this regard.
With this patch, the problem is solved as follows. The IO thread keeps track
(in memory) of which GTID was last queued to the relay log. If it needs to
reconnect, it resumes at that GTID position. It also counts number of events
received within the last, possibly partial, event group, and skips the same
number of events after a reconnect, so that events already enqueued before the
reconnect are not duplicated.
(There is no need to keep any persistent state; whenever we restart slave
threads after both of them being stopped (such as after server restart), we
erase the relay logs and start over from the last GTID applied by SQL thread.
But while the SQL thread is running, this patch is needed to get correct relay
log).
There were several cases where the slave GTID position was not loaded
correctly before being used. This caused various failures such as
corrupting the position at slave start and empty values of
@@gtid_slave_pos and @@gtid_current_pos.
Fixed by adding more checks for loaded position, and by always loading
the position at server startup.
The idea in the code was to protect the user that tries to connect a slave
to a master with completely different domains than what was intended. If
none of the domains in the start position are present at all in the master
binlog, we gave an error.
However, this is a stupid idea. Because when a slave connects to a master
to start replication from the very start of binlogs - such as when setting
up new master->slave servers from scratch - there will be just this
situation, the requested slave position is empty for all the domains in the
master's binlog.
So the code that gives this error is wrong, and the solution is simply to
remove it.
When @@GLOBAL.gtid_strict_mode=1, then certain operations result
in error that would otherwise result in out-of-order binlog files
between servers.
GTID sequence numbers are now allocated independently per domain;
this results in less/no holes in GTID sequences, increasing the
likelyhood that diverging binlogs will be caught by the slave when
GTID strict mode is enabled.
The problem was the Gtid_list event which is logged to the binlog in
10.0 and is not understood by the 5.5 server.
This event is supposed to be replaced with a dummy event for 5.5
servers. But the very first event logged in the very first binlog
has an empty list of GTID, which makes the event too short to be
replacable with an empty event.
The fix is to pad the empty Gtid_list event to be big enough to
be replacable by a dummy event.
Change of user interface to be more logical and more in line with expectations
to work similar to old-style replication.
User can now explicitly choose in CHANGE MASTER whether binlog position is
taken into account (master_gtid_pos=current_pos) or not (master_gtid_pos=
slave_pos) when slave connects to master.
@@gtid_pos is replaced by three separate variables @@gtid_slave_pos (can
be set by user, replicated GTIDs only), @@gtid_binlog_pos (read only), and
@@gtid_current_pos (a combination of the two, most recent GTID within each
domain). mysql.rpl_slave_state is renamed to mysql.gtid_slave_pos to match.
This fixes MDEV-4474.
with query cache, charset ucs2 and collation ucs2_unicode_ci
@ mysql-test/r/ctype_ucs2_query_cache.result
@ mysql-test/t/ctype_ucs2_query_cache-master.opt
@ mysql-test/t/ctype_ucs2_query_cache.test
Adding tests
@ sql/sql_cache.cc
Fixing not to use default_character_set->state_map,
which can point to a non-ASCII character set (utc2, utf16, utf32)
and thus have state_map undefined.
There was missing a check for THD::killed after THD::enter_cond(). This could
cause the binlog dump thread to miss the kill signal during server shutdown
and hang until it was force-closed.
Also fix a race in a test case that occasionally fails in Buildbot.
Implement START SLAVE UNTIL master_gtid_pos = "<GTID position>".
Add test cases, including a test showing how to use this to promote
a new master among a set of slaves.
get_mm_leaf function can store all sorts of spatial features in
one type of field it receives from an Item_field.
So we just allow that by setting the type of this field to GEOMETRY.
per-file comments:
mysql-test/r/gis-rtree.result
result updated
mysql-test/t/gis-rtree.test
test case added.
sql/opt_range.cc
set geom_type=GEOMETRY if we got Field_geom.
Fixed some failing tests
mysql-test/mysql-test-run.pl:
Removed warning from mysql-test-run
mysql-test/r/create.result:
Updated result
mysql-test/r/log_slow.result:
Fixed failing test
mysql-test/suite/funcs_1/r/is_columns_is.result:
Updated result
mysql-test/suite/funcs_1/r/processlist_priv_no_prot.result:
Updated result
mysql-test/suite/funcs_1/r/processlist_val_no_prot.result:
Updated result
mysql-test/t/log_slow.test:
Ensure variables are properly reset at end of test
sql/sql_show.cc:
Fixed max length for user names
This could happen when using Aria for internal temporary files (default case) and using DISTINCT.
_ma_scan_restore_block_record() didn't work correctly if there was rows inserted, updated or deleted on the handler
between calls to _ma_scan_remember_block_record() and _ma_scan_restore_block_record().
The effect was that some DISTINCT queries that used remove_dup_with_compare() could fail.
.bzrignore:
Ignore sql_yacc.hh
mysql-test/suite/maria/r/distinct.result:
Test case for MDEV-4280
mysql-test/suite/maria/t/distinct.test:
Test case for MDEV-4280
mysql-test/t/mysql.test:
Fixed test suite (we could get error -1 in some cases)
sql/sql_select.cc:
Break loop if restart_rnd_next() gives an error
storage/maria/ha_maria.cc:
scan_restore_pos() can return disk fault error.
storage/maria/ma_blockrec.c:
_ma_scan_remember_block_record() did incorrectly update scan.dir instead of scan_save.dir .
_ma_scan_restore_block_record() didn't work correctly if there was rows inserted,updated or deleted on the handler
between calls to _ma_scan_remember_block_record() and _ma_scan_restore_block_record().
Fixed by adding counters for row changes and reading the current scan page if changes had been made.
storage/maria/ma_blockrec.h:
scan_restore_pos() can return disk fault error.
storage/maria/ma_delete.c:
Increment row_changes
storage/maria/ma_scan.c:
scan_restore_pos() can return disk fault error.
storage/maria/ma_update.c:
Increment row_changes
storage/maria/ma_write.c:
Increment row_changes
storage/maria/maria_def.h:
scan_restore_pos() can return disk fault error.
- Use lc-messages-dir instead of deprecated --language when running mysqld in bootstrap mode.
- Add some verbosity to mysql_install_db.exe when it runs in course of MSI installation.
MDEV-4489 "Replication of big5, cp932, gbk, sjis strings makes wrong values on slave"
has been fixed.
Problem:
String constants of some Asian charsets (big5,cp932,gbk,sjis)
can have backslash '\' (0x5C) in the second byte of multi-byte characters.
Replicating of such constants using the standard '\'-escaping is dangerous.
Therefore, constants of these charsets are replicated using hex notation:
INSERT INTO t1 (a) VALUES (0x815C);
However, 0xHHHH constants do not work well in some cases,
because they can behave as strings and as numbers, depending on context
(for example, depending on the data type of the column in an INSERT statement).
This SQL script was not replicated correctly with statement-based replication:
SET NAMES gbk;
PREPARE STMT FROM 'INSERT INTO t1 (a) VALUES (?)';
SET @a = '1';
EXECUTE STMT USING @a;
The INSERT statement was replicated as:
INSERT INTO t1 (a) VALUES (0x31);
'1' was correctly converted to the number 1 on master.
But the 0x31 constant was treated as number 49 on slave.
Fix:
1. Binary log now uses X'HHHH' instead of 0xHHHH constants.
2. The X'HHHH' constants now work always as strings, in all contexts.
This is the SQL standard compliant behaviour.
After the fix, the above statement is replicated as:
INSERT INTO t1 (a) VALUES (X'31');
X'31' is treated as string '1' on slave, and is correctly converted to 1.
modified:
@ mysql-test/r/ctype_cp932_binlog_stm.result
@ mysql-test/r/select.result
@ mysql-test/r/select_jcl6.result
@ mysql-test/r/select_pkeycache.result
@ mysql-test/r/user_var-binlog.result
@ mysql-test/r/varbinary.result
@ mysql-test/suite/binlog/r/binlog_stm_ctype_ucs.result
@ mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result
@ mysql-test/suite/rpl/r/rpl_charset_sjis.result
@ mysql-test/suite/rpl/r/rpl_mdev382.result
@ mysql-test/suite/rpl/t/rpl_charset_sjis.test
@ mysql-test/t/ctype_cp932_binlog_stm.test
@ mysql-test/t/select.test
@ mysql-test/t/varbinary.test
Adding and updating tests
@ sql/item.cc
@ sql/item.h
@ sql/sql_yacc.yy
@ sql/sql_lex.cc
Splitting the implementations of X'HH' and 0xHH constants into two
separate classes. Fixing the parser to distinguish the two syntaxes.
@ sql/log_event.cc
Using X'HH' instead of 0xHH for binary logging for string constants
of the "dangerous" charsets.
@ sql/sql_string.h
Adding a helped method String::append_hex().
Now we only execute the innermost of them (the most relevant).
The solution was to add a 'handled' marker to MYSQL_ERROR and mark all elements for which we have executed a condition handler.
When searching for new conditions, we will ignore any marked element.
.bzrignore:
Ignore error message file
mysql-test/r/sp.result:
Added testcase for continue handlers.
mysql-test/t/sp.test:
Added testcase for continue handlers.
sql/sp_head.cc:
Mark errors for which we will excute a handler as 'handled'
Ignore already handled warnings/errors
sql/sql_error.cc:
Add 'handled' argument to MYSQL_ERROR, so that we can mark the errors/warnings we have handled.
sql/sql_error.h:
Add 'handled' argument to MYSQL_ERROR, so that we can mark the errors/warnings we have handled.
Solaris fixes:
- Fixed that wait_timeout_func and wait_timeout tests works on solaris
- We have to compile without NO_ALARM on Solaris as Solaris doesn't support timeouts on sockets with setsockopt(.. SO_RCVTIMEO).
- Fixed that compile-solaris-amd64-debug works (before that we got a wrong ELF class: ELFCLASS64 on linkage)
- Added missing sync_with_master
Other bug fixes:
- Free memory for rpl_global_gtid_binlog_state before exit() to avoid 'accessing uninitalized mutex' error.
BUILD/FINISH.sh:
Fixed issues on Solaris with ksh
BUILD/compile-solaris-amd64-debug:
Added missing -m64 flag
configure.cmake:
We have to compile without NO_ALARM on Solaris as Solaris doesn't support timeouts on sockets with setsockopt(.. SO_RCVTIMEO)
mysql-test/suite/rpl/t/rpl_gtid_mdev4473.test:
- Added missing sync_with_master (fix by knielsen)
sql-common/client.c:
Added () to get rid of compiler warning
sql/item_strfunc.cc:
Fixed compiler warning
sql/log.cc:
Free memory for static variable rpl_global_gtid_binlog_state before exit()
- If we are compiling with safemalloc, we would try to call sf_free() for some members after sf_terminate() was called, which would result of trying to access the uninitalized mutex 'sf_mutex'
sql/multi_range_read.cc:
Fixed compiler warnings of converting double to ulong.
sql/opt_range.cc:
Fixed compiler warnings of converting double to ulong or uint
- Better to have all variables that can be number of rows as 'ha_rows'
sql/rpl_gtid.cc:
Added rpl_binlog_state::free() to be able to free memory for static objects before exit()
sql/rpl_gtid.h:
Added rpl_binlog_state::free() to be able to free memory for static objects before exit()
sql/set_var.cc:
Fixed compiler warning
sql/sql_join_cache.cc:
Fixed compiler warnings of converting double to uint
sql/sql_show.cc:
Added cast to get rid of compiler warning
sql/sql_statistics.cc:
Remove code that didn't do anything.
(store_record() with record[0] is a no-op)
storage/xtradb/os/os0file.c:
Added __attribute__ ((unused))
support-files/compiler_warnings.supp:
Ignore warnings from atomic_add_64_nv
(was not able to fix this with a cast as the macro is a bit different between systems)
vio/viosocket.c:
Added more DBUG_PRINT
- Call tmp_having->update_used_tables() *before* we have call JOIN::cleanup().
Making the call after join::cleanup() is not allowed, because subquery
predicate items walk parent join's JOIN_TAB structures. Which can be
invalidated by JOIN::cleanup().
When iterating over a list of conditions using List_iterator
the function remove_eq_conds should skip all predicates that
replace a condition from the list. Otherwise it can come to
an infinite recursion.
<non-nullable datatime field> IS NULL in outer joins with
that in inner joins.
Previously such condition was transformed into the condition
<non-nullable datatime field> = 0 unless the field belonged
to an inner table of an outer join. In this case the predicate
was interpreted as for any other field.
Now if the field in the predicate <non-nullable datatime field> IS NULL
belongs to an inner table of an outer join the predicate is
transformed into the disjunction
<non-nullable datatime field> = 0 OR <non-nullable datatime field> IS NULL.
This is fully compatible with the semantics of such predicates in 5.5.
