The MDEV-25004 test innodb_fts.versioning is omitted because ever since
commit 685d958e38 InnoDB would not allow
writes to a database where the redo log file ib_logfile0 is missing.
I have not been able to repeat the problem, but the stack trace indicates
that ha_maria::extra() is called with a null file pointer.
This indicates the table has either never been opened or opened and closed,
with file pointer set to NULL, but ha_maria::extra() is still called.
In JOIN::partial_cleanup() we are only checking of table->is_created(),
which will fail if table was created and later closed.
Fixed by clearing table->created if table is dropped.
I added an assert to is_created() to catch the case that the create
flag does not match 'file'.
As of now innodb does not store trx_id for each record in secondary index.
The idea behind is following: let us store only per-page max_trx_id, and
delete-mark the records when they are deleted/updated.
If the read starts, it rememders the lowest id of currently active
transaction. Innodb refers to it as trx->read_view->m_up_limit_id.
See also ReadView::open.
When the page is fetched, its max_trx_id is compared to m_up_limit_id.
If the value is lower, and the secondary index record is not delete-marked,
then this page is just safe to read as is. Else, a clustered index could be
needed ato access. See page_get_max_trx_id call in row_search_mvcc, and the
corresponding switch (row_search_idx_cond_check(...)) below.
Virtual columns are required to be updated in case if the record was
delete-marked. The motivation behind it is documented in
Row_sel_get_clust_rec_for_mysql::operator() near
row_sel_sec_rec_is_for_clust_rec call.
This was basically a description why virtual column computation can
normally happen during SELECT, and, generally, a vcol index access.
Sometimes stats tables are updated by innodb. This starts a new
transaction, and it can happen that it didn't finish to the moment of
SELECT execution, forcing virtual columns recomputation. If the result was
a something that normally outputs a warning, like division by zero, then
it could be outputted in a racy manner.
The solution is to suppress the warnings when a column is computed
for the described purpose.
ignore_wrnings argument is added innobase_get_computed_value.
Currently, it is only true for a call from
row_sel_sec_rec_is_for_clust_rec.
The problem is that if table definition cache (TDC) is full of real tables
which are in tables cache, view definition can not stay there so will be
removed by its own underlying tables.
In situation above old mechanism of detection matching definition in PS
and current version always require reprepare and so prevent executing
the PS.
One work around is to increase TDC, other - improve version check for
views/triggers (which is done here). Now in suspicious cases we check:
- timestamp (microseconds) of the view to be sure that version really
have changed;
- time (microseconds) of creation of a trigger related to time
(microseconds) of statement preparation.
empty identifier specified as `` ends up with a NULL LEX_CSTRING::str in lexer.
This is not considered correct in upper layers, for example in Compare_identifiers::operator().
Empty column name is usually avoided by a check_column_name() call while parsing,
and period name matches the column name completely.
Hence, this fix uses the mentioned call for verification, too.
1. Store assignment failures on incompatible data types now raise errors if:
- STRICT_ALL_TABLES or STRICT_TRANS_TABLES sql_mode is used, and
- IGNORE is not used
Otherwise, only a warning is raised and the statement continues.
2. Changing the error/warning test as follows:
-ERROR HY000: Illegal parameter data types inet6 and int for operation 'SET'
+ERROR HY000: Cannot cast 'int' as 'inet6' in assignment of `db`.`t`.`col`
so in case of a big table it's easier to see which column has the problem.
The new error text is also applied to SP variables.
Not the SPIDER issue - happens to INSERT DELAYED.
the field::make_new_field does't copy the LONG_UNIQUE_HASH_FIELD
flag to the new field. Though the Delayed_insert::get_local_table
copies the field->vcol_info for this field. Ad a result
the parse_vcol_defs doesn't create the expression for that column
so the field->vcol_info->expr is NULL. Which leads to crash.
Backported fix for this from 10.5 - the flagg added in the
Delayed_insert::get_local_table.
Another problem with the USING HASH key is thst the
parse_vcol_defs modifies the table->keys content. Then the same
parse_vcol_defs is called on the table copy that has keys already
modified. Backported fix for that from 10.5 - key copying added
tot the Delayed_insert::get_local_table.
Finally - the created copy has to clear the expr_arena as
this table is not in the thd->open_tables list so won't be
cleared automatically.
Now INSERT, UPDATE, ALTER statements involving incompatible data type pairs, e.g.:
UPDATE TABLE t1 SET col_inet6=col_int;
INSERT INTO t1 (col_inet6) SELECT col_in FROM t2;
ALTER TABLE t1 MODIFY col_inet6 INT;
consistently return an error at the statement preparation time:
ERROR HY000: Illegal parameter data types inet6 and int for operation 'SET'
and abort the statement before starting interating rows.
This error is the same with what is raised for queries like:
SELECT col_inet6 FROM t1 UNION SELECT col_int FROM t2;
SELECT COALESCE(col_inet6, col_int) FROM t1;
Before this change the error was caught only during the execution time,
when a Field_xxx::store_xxx() was called for the very firts row.
The behavior was not consistent between various statements and could do different things:
- abort the statement
- set a column to the data type default value (e.g. '::' for INET6)
- set a column to NULL
A typical old error was:
ERROR 22007: Incorrect inet6 value: '1' for column `test`.`t1`.`a` at row 1
EXCEPTION:
Note, there is an exception: a multi-row INSERT..VALUES, e.g.:
INSERT INTO t1 (col_a,col_b) VALUES (a1,b1),(a2,b2);
checks assignment compability at the preparation time for the very first row only:
(col_a,col_b) vs (a1,b1)
Other rows are still checked at the execution time and return the old warnings
or errors in case of a failure. This is done because catching all rows at the
preparation time would change behavior significantly. So it still works
according to the STRICT_XXX_TABLES sql_mode flags and the table transaction ability.
This is too late to change this behavior in 10.7.
There is no a firm decision yet if a multi-row INSERT..VALUES
behavior will change in later versions.
:: Syntax change ::
Keyword AUTO enables history partition auto-creation.
Examples:
CREATE TABLE t1 (x int) WITH SYSTEM VERSIONING
PARTITION BY SYSTEM_TIME INTERVAL 1 HOUR AUTO;
CREATE TABLE t1 (x int) WITH SYSTEM VERSIONING
PARTITION BY SYSTEM_TIME INTERVAL 1 MONTH
STARTS '2021-01-01 00:00:00' AUTO PARTITIONS 12;
CREATE TABLE t1 (x int) WITH SYSTEM VERSIONING
PARTITION BY SYSTEM_TIME LIMIT 1000 AUTO;
Or with explicit partitions:
CREATE TABLE t1 (x int) WITH SYSTEM VERSIONING
PARTITION BY SYSTEM_TIME INTERVAL 1 HOUR AUTO
(PARTITION p0 HISTORY, PARTITION pn CURRENT);
To disable or enable auto-creation one can use ALTER TABLE by adding
or removing AUTO from partitioning specification:
CREATE TABLE t1 (x int) WITH SYSTEM VERSIONING
PARTITION BY SYSTEM_TIME INTERVAL 1 HOUR AUTO;
# Disables auto-creation:
ALTER TABLE t1 PARTITION BY SYSTEM_TIME INTERVAL 1 HOUR;
# Enables auto-creation:
ALTER TABLE t1 PARTITION BY SYSTEM_TIME INTERVAL 1 HOUR AUTO;
If the rest of partitioning specification is identical to CREATE TABLE
no repartitioning will be done (for details see MDEV-27328).
:: Description ::
Before executing history-generating DML command (see the list of commands below)
add N history partitions, so that N would be sufficient for potentially
generated history. N > 1 may be required when history partitions are switched
by INTERVAL and current_timestamp is N times further than the interval
boundary of the last history partition.
If the last history partition equals or exceeds LIMIT records then new history
partition is created and selected as the working partition. According to
MDEV-28411 partitions cannot be switched (or created) while the command is
running. Thus LIMIT does not carry strict limitation and the history partition
size must be planned as LIMIT value plus average number of history one DML
command can generate.
Auto-creation is implemented by synchronous fast_alter_partition_table() call
from the thread of the executed DML command before the command itself is run
(by the fallback and retry mechanism similar to Discovery feature,
see Open_table_context).
The name for newly added partitions are generated like default partition names
with extension of MDEV-22155 (which avoids name clashes by extending assignment
counter to next free-enough gap).
These DML commands can trigger auto-creation:
DELETE (including multitable DELETE, excluding DELETE HISTORY)
UPDATE (including multitable UPDATE)
REPLACE (including REPLACE .. SELECT)
INSERT .. ON DUPLICATE KEY UPDATE (including INSERT .. SELECT .. ODKU)
LOAD DATA .. REPLACE
:: Bug fixes ::
MDEV-23642 Locking timeout caused by auto-creation affects original DML
The reasons for this are:
- Do not disrupt main business process (the history is auxiliary service);
- Consequences are non-fatal (history is not lost, but comes into wrong
partition; fixed by partitioning rebuild);
- There is more freedom for application to fail in this case or not: it may
read warning info and find corresponding error number.
- While non-failing command is easy to handle by an application and fail it,
the opposite is hard to handle: there is no automatic actions to fix
failed command and retry, DBA intervention is required and until then
application is non-functioning.
MDEV-23639 Auto-create does not work under LOCK TABLES or inside triggers
Don't do tdc_remove_table() for OT_ADD_HISTORY_PARTITION because it is
not possible in locked tables mode.
LTM_LOCK_TABLES mode (and LTM_PRELOCKED_UNDER_LOCK_TABLES) works out
of the box as fast_alter_partition_table() can reopen tables via
locked_tables_list.
In LTM_PRELOCKED we reopen and relock table manually.
:: More fixes ::
* some_table_marked_for_reopen flag fix
some_table_marked_for_reopen affets only reopen of
m_locked_tables. I.e. Locked_tables_list::reopen_tables() reopens only
tables from m_locked_tables.
* Unused can_recover_from_failed_open() condition
Is recover_from_failed_open() can be really used after
open_and_process_routine()?
:: Reviewed by ::
Sergei Golubchik <serg@mariadb.org>
column generated using date_format() and if()
vcol_info->expr is allocated on expr_arena at parsing stage. Since
expr item is allocated on expr_arena all its containee items must be
allocated on expr_arena too. Otherwise fix_session_expr() will
encounter prematurely freed item.
When table is reopened from cache vcol_info contains stale
expression. We refresh expression via TABLE::vcol_fix_exprs() but
first we must prepare a proper context (Vcol_expr_context) which meets
some requirements:
1. As noted above expr update must be done on expr_arena as there may
be new items created. It was a bug in fix_session_expr_for_read() and
was just not reproduced because of no second refix. Now refix is done
for more cases so it does reproduce. Tests affected: vcol.binlog
2. Also name resolution context must be narrowed to the single table.
Tested by: vcol.update main.default vcol.vcol_syntax gcol.gcol_bugfixes
3. sql_mode must be clean and not fail expr update.
sql_mode such as MODE_NO_BACKSLASH_ESCAPES, MODE_NO_ZERO_IN_DATE, etc
must not affect vcol expression update. If the table was created
successfully any further evaluation must not fail. Tests affected:
main.func_like
Reviewed by: Sergei Golubchik <serg@mariadb.org>
1. moved fix_vcol_exprs() call to open_table()
mysql_alter_table() doesn't do lock_tables() so it cannot win from
fix_vcol_exprs() from there. Tests affected: main.default_session
2. Vanilla cleanups and comments.
