The affected code is well covered by tests for MDEV-8766.
Adding only the missing part: the old mode OLD_MODE_ZERO_DATE_TIME_CAST
in combination with 0000-MM-00 and YYYY-00-00.
The old mode in combination with 0000-00-DD was already covered,
so was the new mode with all types of DATETIME values.
- Adding a helper class Sec6 to store (neg,seconds,microseconds)
- Adding a helper class VSec6 (Sec6 with a flag for "IS NULL")
- Wrapping related functions as methods of Sec6;
* number_to_datetime()
* number_to_time()
* my_decimal2seconds()
* Item::get_seconds()
* A big piece of code in Item_func_sec_to_time::get_date()
- Using the new classes in places where second-to-temporal
conversion takes place:
* Field_timestamp::store(double)
* Field_timestamp::store(longlong)
* Field_timestamp_with_dec::store_decimal(my_decimal)
* Field_temporal_with_date::store(double)
* Field_temporal_with_date::store(longlong)
* Field_time::store(double)
* Field_time::store(longlong)
* Field_time::store_decimal(my_decimal)
* Field_temporal_with_date::store_decimal(my_decimal)
* get_interval_value()
* Item_func_sec_to_time::get_date()
* Item_func_from_unixtime::get_date()
* Item_func_maketime::get_date()
This change simplifies these methods and functions a lot.
- Warnings are now sent at VSec6 initialization time, when the source
data is available in its original data type representation.
If Sec6::to_time() or Sec6::to_datetime() truncate data again during
conversion to MYSQL_TIME, they send warnings, but only if no warnings
were sent during VSec6 initialization. This helps prevents double warnings.
The call for val_str() in Item_func_sec_to_time::get_date() is not
needed any more, so it's removed. This change actually fixes the problem.
As a good effect, FROM_UNIXTIME() and MAKETIME() now also send warnings
in case if the seconds arguments is out of range. Previously these
functions returned NULL silently.
- Splitting the code in the global function make_truncated_value_warning()
into a number of methods THD::raise_warning_xxxx().
This was needed to reuse the logic that chooses between:
* ER_TRUNCATED_WRONG_VALUE
* ER_WRONG_VALUE
* ER_TRUNCATED_WRONG_VALUE_FOR_FIELD
for non-temporal data types (Sec6).
- Removing:
* Item::get_seconds()
* number_to_time_with_warn()
as this code now resides inside methods of Sec6.
- Cleanup (changes that are not directly related to the fix):
* Removing calls for field_name_or_null() and passing NULL instead
in Item_func_hybrid_field_type::get_date_from_{int|real}_op,
because Item_func_hybrid_field_type::field_name_or_null()
always returns NULL
* Replacing a number of calls for make_truncated_value_warning()
to calls for THD::raise_warning_xxx(). In these places
we know that the execution went through a certain
branch of make_truncated_value_warning(),
(e.g. the exact error code is known, or field name is always NULL,
or field name is always not-NULL). So calls for the entire
make_truncated_value_warning() after splitting are not necessary.
We do not accept:
1. We did not have this problem (fixed earlier and better)
d982e717ab Bug#27510150: MYSQLDUMP FAILS FOR SPECIFIC --WHERE CLAUSES
2. We do not have such options (an DBUG_ASSERT put just in case)
bbc2e37fe4 Bug#27759871: BACKRONYM ISSUE IS STILL IN MYSQL 5.7
3. Serg fixed it in other way in this release:
e48d775c6f Bug#27980823: HEAP OVERFLOW VULNERABILITIES IN MYSQL CLIENT LIBRARY
materialized derived table/view that uses aliases is done
The problem appears when a column alias inside the materialized derived
table/view t1 definition coincides with the column name used in the
GROUP BY clause of t1. If the condition that can be pushed into t1
uses that ambiguous column name this column is determined as a column that
is used in the GROUP BY clause instead of the alias used in the projection
list of t1. That causes wrong result.
To prevent it resolve_ref_in_select_and_group() was changed.
virtual Item_null_result::get_date() was not overridden.
It used the inherited Item::get_date(), which tests field_type(),
which in case of Item_null_result calls result_field->field_type(),
and result_field is not really always set (e.g. it's not set in the
test case from the bug report).
Overriding Item_null::get_date() like it's done for other val_xxx() methods.
This make the code more symmetric across data types.
In the new reduction, get_date() immediately returns NULL without entering
into any data type specific code.
MDEV-16426 Optimizer erroneously treats equal constants of different formats as same
A cleanup for MDEV-14630: fixing a crash in Item_decimal::eq().
Problems:
- old implementations of Item_decimal::eq() and
Item_temporal_literal::eq() were not symmetric
with Item_param::eq(), this caused MDEV-11361.
- old implementations for DECIMAL and temporal data types
did not take into account that in case when eq() is called
with binary_cmp==true, {{eq()}} should check not only equality
of the two values, but also equality if their decimal precision.
This cuases MDEV-16426.
- Item_decimal::eq() crashes with "item" pointing
to a non-DECIMAL value. Before MDEV-14630
non-DECIMAL values were filtered out by the test:
type() == item->type()
as literals of different types had different type().
After MDEV-14630 type() for literals of all data types return CONST_ITEM.
This caused failures in tests:
./mtr engines/iuds.insert_number
./mtr --ps --embedded main.explain_slowquerylog
(revealed by buildbot)
The essence of the fix:
Making literals and Item_param reuse the same code to avoid
asymmetries between Item_param::eq(Item_literal) and
Item_literal::eq(Item_param), now and in the future, and to
avoid code duplication between Item_literal and Item_param.
Adding tests for "decimals" for DECIMAL and temporal data types,
to treat constants of different scale as not equal when "binary_cmp"
is "true".
Details:
1. Adding a helper class Item_const to extract constant values from Items easier
2. Deriving Item_basic_value from Item_const
3. Joining Type_handler::Item_basic_value_eq() and Item_basic_value_bin_eq()
into a single method with an extra "binary_cmp" argument
(it looks simple this way) and renaming the new method to Item_const_eq().
Modifying its implementations to operate with
Item_const instead of Item_basic_value.
4. Adding a new class Type_handler_hex_hybrid,
to handle hex constants like 0x616263.
5. Removing Item::VARBIN_ITEM and fixing Item_hex_constant to
use type_handler_hex_hybrid instead of type_handler_varchar.
Item_hex_hybrid::type() now returns CONST_ITEM, like all
other literals do.
6. Move virtual methods Item::type_handler_for_system_time() and
Item::cast_to_int_type_handler() from Item to Type_handler.
7. Removing Item_decimal::eq() and Item_temporal_literal::eq().
These classes are now handled by the generic Item_basic_value::eq().
8. Implementing Type_handler_temporal_result::Item_const_eq()
and Type_handler_decimal_result::Item_const_eq(),
this fixes MDEV-11361.
9. Adding tests for "decimals" into
Type_handler_decimal_result::Item_const_eq() and
Type_handler_temporal_result::Item_const_eq()
in case if "binary_cmp" is true.
This fixes MDEV-16426.
10. Moving Item_cache out of Item_basic_value.
They share nothing. It simplifies implementation
of Item_basic_value::eq(). Deriving Item_cache
directly from Item.
11. Adding class DbugStringItemTypeValue, which
used Item::print() internally, and using
in instead of the old debug printing code.
This gives nicer output in func_debug.result.
Changes N5 and N6 do not directly relate to the bugs fixed,
but make the code fully symmetric across all literal types.
Without a new handler Type_handler_hex_hybrid we'd have
to keep two code branches (for regular literals and for
hex hybrid literals).
The problem described in the bug report happened because the code
did not test check_cols(1) after fix_fields() in a few places.
Additionally, fix_fields() could be called multiple times for SP variables,
because they are all fixed at a early stage in append_for_log().
Solution:
1. Adding a few helper methods
- fix_fields_if_needed()
- fix_fields_if_needed_for_scalar()
- fix_fields_if_needed_for_bool()
- fix_fields_if_needed_for_order_by()
and using it in many cases instead of fix_fields() where
the "fixed" status is not definitely known to be "false".
2. Adding DBUG_ASSERT(!fixed) into Item_splocal*::fix_fields()
to catch double execution.
3. Adding tests.
As a good side effect, the patch removes a lot of duplicate code (~60 lines):
if (!item->fixed &&
item->fix_fields(..) &&
item->check_cols(1))
return true;
Queries involving rollup need all aggregate function to have copy_or_same function where we create a copy
of item_sum items for each sum level.
Implemented copy_or_same function for the custom aggregate function class (Item_sum_sp)
The logic and the implementation scheme are similar with the
MDEV-9197 Pushdown conditions into non-mergeable views/derived tables
How the push down is made on the example:
select * from t1
where a>3 and b>10 and
(a,b) in (select x,max(y) from t2 group by x);
-->
select * from t1
where a>3 and b>10 and
(a,b) in (select x,max(y)
from t2
where x>3
group by x
having max(y)>10);
The implementation scheme:
1. Search for the condition cond that depends only on the fields
from the left part of the IN subquery (left_part)
2. Find fields F_group in the select of the right part of the
IN subquery (right_part) that are used in the GROUP BY
3. Extract from the cond condition cond_where that depends only on the
fields from the left_part that stay at the same places in the left_part
(have the same indexes) as the F_group fields in the projection of the
right_part
4. Transform cond_where so it can be pushed into the WHERE clause of the
right_part and delete cond_where from the cond
5. Transform cond so it can be pushed into the HAVING clause of the right_part
The optimization is made in the
Item_in_subselect::pushdown_cond_for_in_subquery() and is controlled by the
variable condition_pushdown_for_subquery.
New test file in_subq_cond_pushdown.test is created.
There are also some changes made for setup_jtbm_semi_joins().
Now it is decomposed into the 2 procedures: setup_degenerate_jtbm_semi_joins()
that is called before optimize_cond() for cond and setup_jtbm_semi_joins()
that is called after optimize_cond().
New setup_jtbm_semi_joins() is made in the way so that the result of its work is
the same as if it was called before optimize_cond().
The code that is common for pushdown into materialized derived and into materialized
IN subqueries is factored out into pushdown_cond_for_derived(),
Item_in_subselect::pushdown_cond_for_in_subquery() and
st_select_lex::pushdown_cond_into_where_clause().
items in the partitioning function were taking
the table name from the table's field
(in set_field(from_field) in Item_field::fix_fields)
and field's table_name is TABLE::alias.
But alias is changed for every statement, and
can be realloced if next statement uses a longer
alias. But partitioning items are fixed once
and live as long as the TABLE does. So if
an alias is realloced, pointers to the old
alias string will become invalid.
Fix partitioning item table_name to point to
the actual table name instead.
rename to post_fix_fields_part_expr_processor()
because it's only used after fix_fields in
fix_fields_part_func() and can be used for
various post-fix_fields fixups
multiple times with different arguments.
If the ON expression of an outer join is an OR formula with one
of the disjunct being a constant formula then the expression
cannot be null-rejected if the constant formula is true. Otherwise
it can be null-rejected and if so the outer join can be converted
into inner join. This optimization was added in the patch for
mdev-4817. Yet the code had a defect: if the query was used in
a stored procedure with parameters and the constant item contained
some of them then the value of this constant item depended on the
values of the parameters. With some parameters it may be true,
for others not. The validity of conversion to inner join is checked
only once and it happens only for the first call of procedure.
So if the parameters in the first call allowed the conversion it
was done and next calls used the transformed query though there
could be calls whose parameters made the conversion invalid.
Fixed by cheking whether the constant disjunct in the ON expression
originally contained an SP parameter. If so the expression is not
considered as null-rejected. For this check a new item's attribute
was intruduced: Item::with_param. It is calculated for each item
by fix fields() functions.
Also moved the call of optimize_constant_subqueries() in
JOIN::optimize after the call of simplify_joins(). The reason
for this is that after the optimization introduced by the patch
for mdev-4817 simplify_joins() can use the results of execution
of non-expensive constant subqueries and this is not valid.
This patch does the following:
1. Makes Field_vers_trx_id::type_handler() return
&type_handler_vers_trx_id rather than &type_handler_longlong.
Fixes Item_func::convert_const_compared_to_int_field() to
test field_item->type_handler() against &type_handler_vers_trx_id,
instead of testing field_item->vers_trx_id().
2. Removes VERS_TRX_ID related code from
Type_handler_hybrid_field_type::aggregate_for_comparison(),
because "BIGINT UNSIGNED GENERATED ALWAYS AS ROW {START|END}"
columns behave just like a BIGINT in a regular comparison,
i.e. when not inside AS OF.
3. Removes
- Type_handler_hybrid_field_type::m_vers_trx_id;
- Type_handler_hybrid_field_type::m_flags;
because a "BIGINT UNSIGNED GENERATED ALWAYS AS ROW {START|END}"
behaves like a regular BIGINT column when in UNION.
4. Removes Field::vers_trx_id(), Item::vers_trx_id(), Item::field_flags()
They are not needed anymore. See N1.
Problems:
1. Unlike Item_field::fix_fields(),
Item_sum_sp::fix_length_and_dec() and Item_func_sp::fix_length_and_dec()
did not run the code which resided in adjust_max_effective_column_length(),
therefore they did not extend max_length for the integer return data types
from the user-specified length to the maximum length according to
the data type capacity.
2. The code in adjust_max_effective_column_length() was not correct
for TEXT data, because Field_blob::max_display_length()
multiplies to mbmaxlen. So TEXT variants were unintentionally
promoted to the next longer data type for multi-byte character
sets: TINYTEXT->TEXT, TEXT->MEDIUMTEXT, MEDIUMTEXT->LONGTEXT.
3. Item_sum_sp::create_table_field_from_handler()
Item_func_sp::create_table_field_from_handler()
erroneously called tmp_table_field_from_field_type(),
which converted VARCHAR(>512) to TEXT variants.
So "CREATE..SELECT spfunc()" erroneously converted
VARCHAR to TEXT. This was wrong, because stored
functions have explicitly declared data types,
which should be preserved.
Solution:
- Removing Type_std_attributes(const Field *)
and using instead Type_std_attributes::set() in combination
with field->type_str_attributes() all around the code, e.g.:
Type_std_attributes::set(field->type_std_attributes())
These two ways of copying attributes from a Field
to an Item duplicated each other, and were slightly
different in how to mix max_length and mbmaxlen.
- Removing adjust_max_effective_column_length() and
fixing Field::type_std_attributes() to do all necessary
type-specific calculations , so no further adjustments
is needed.
Field::type_std_attributes() is now called from all affected methods:
Item_field::fix_fields()
Item_sum_sp::fix_length_and_dec()
Item_func_sp::fix_length_and_dec()
This fixes the problem N1.
- Making Field::type_std_attributes() virtual, to make
sure that type-specific adjustments a properly done
by individual Field_xxx classes. Implementing
Field_blob::type_std_attributes() in the way that
no TEXT promotion is done.
This fixes the problem N2.
- Fixing Item_sum_sp::create_table_field_from_handler()
Item_func_sp::create_table_field_from_handler() to
call create_table_field_from_handler() instead of
tmp_table_field_from_field_type() to avoid
VARCHAR->TEXT conversion on "CREATE..SELECT spfunc()".
- Recording mysql-test/suite/compat/oracle/r/sp-param.result
as "CREATE..SELECT spfunc()" now correctly
preserve the data type as specified in the RETURNS clause.
- Adding new tests
Problem:
The logic in store_column_type() with a switch on field type was
hard to follow. The part for MEDIUMINT (MYSQL_TYPE_INT24) was not correct.
It erroneously calculated the precision of MEDIUMINT UNSIGNED
as 7 instead of 8.
A similar hard-to-follow switch doing some type specific calculations
resided in adjust_max_effective_column_length(). It was also wrong for
MEDIUMINT (reported as a separate issue in MDEV-15946).
Solution:
1. Introducing a new class Information_schema_numeric_attributes
2. Adding a new virtual method Field::information_schema_numeric_attributes()
3. Splitting the logic in store_column_type() into virtual
implementations of information_schema_numeric_attributes().
4. In order to avoid adding duplicate code for the integer data types,
adding a new virtual method Field_int::numeric_precision(),
which returns the number of digits.
Additional changes:
1. Adding the "const" qualifier to Field::max_display_length()
2. Moving the code from adjust_max_effective_column_length()
directly to Field::max_display_length().
There was no any sense to have two implementations:
- a set of wrong virtual implementations for Field_xxx::max_display_length()
- additional code in adjust_max_effective_column_length() fixing
bad results of Field_xxx::max_display_length()
This change is safe:
- The code using Field::max_display_length()
in field.cc, sql_show.cc, sql_type.cc is not affected.
- The code in rpl_utility.cc is also not affected.
See a new DBUG_ASSSERT and new comments explaining why.
In the new reduction, Field_xxx::max_display_length() returns
correct results for all integer types (except MEDIUMINT, see below).
Putting implementations of numeric_precision() and max_display_length()
near each other in field.h made the logic much clearer and thus
helped to reveal bad results for Field_medium::max_display_length(),
which returns 9 instead of 8 for signed MEDIUMINT fields.
This problem will be addressed separately (MDEV-15946).
Note, this change is also useful for pluggable data types (see MDEV-4912),
as now a user defined Field_xxx has a way to control what's returned
in INFORMATION_SCHEMA.COLUMNS.NUMERIC_PRECISION and
INFORMATION_SCHEMA.COLUMNS.NUMERIC_SCALE by implementing
a desired behavior in Field_xxx::information_schema_numeric_attributes().
The implementations of the convert_to_basic_const_item() virtual
function for the Item_cache classes should call cache_value() when
value_cached == NULL.
WRONG VALUES
User variables will have the default session collation
associated with it. And a select which uses it as part of a
union may infer the collation while type merging.
This leads to problems when the result is of DECIMAL type.
Setting the appropriate collation of DECIMAL result type
is missing in 5.7 code base.
Added code to set appropriate collation when the result is
of DECIMAL type during Item_type_holder::join_types().
Renaming methods:
- Field::make_field(Send_field*) to make_send_field(..)
- Item::make_field(THD *,Send_field *) to make_send_field(..)
- Item::init_make_field(Send_field *, enum_field_type) to init_make_send_field(..)
These names looked similar to other functions that are used
for a very different purpose (creating Field instances):
- Public function "Field * make_field(..)"
- Method "Field *Column_defitinion::make_field(..)"
The rename makes it's easier to search the code using "grep".
Problem was the Item_field::Item_field(THD*, Field*) had old code
that put a null pointer in orig_field_names. Now, when we have
proper re-prepare if table definition changes, this is not needed
anymore.
To disallow equality propagation for DATETIME with non-zero YYYYMMDD part we were setting null_value to true.
This caused issues when we were calculating selectivity for a condition as this returned IMPOSSIBLE WHERE.
The issue is resolved by not setting null_value to true for DATETIME with non-zero YYYYMMDD.
Refactor get_datetime_value() not to create Item_cache_temporal(),
but do it always in ::fix_fields() or ::fix_length_and_dec().
Creating items at the execution time doesn't work very well with
virtual columns and check constraints that are fixed and executed
in different THDs.
Do not assume that it's always item->field_type() - this is not the case
in temporal comparisons (e.g. when comparing DATETIME column with a TIME
literal).
- CREATE PACKAGE [BODY] statements are now
entirely written to mysql.proc with type='PACKAGE' and type='PACKAGE BODY'.
- CREATE PACKAGE BODY now supports IF NOT EXISTS
- DROP PACKAGE BODY now supports IF EXISTS
- CREATE OR REPLACE PACKAGE [BODY] is now supported
- CREATE PACKAGE [BODY] now support the DEFINER clause:
CREATE DEFINER user@host PACKAGE pkg ... END;
CREATE DEFINER user@host PACKAGE BODY pkg ... END;
- CREATE PACKAGE [BODY] now supports SQL SECURITY and COMMENT clauses, e.g.:
CREATE PACKAGE p1 SQL SECURITY INVOKER COMMENT "comment" AS ... END;
- Package routines are now created from the package CREATE PACKAGE BODY
statement and don't produce individual records in mysql.proc.
- CREATE PACKAGE BODY now supports package-wide variables.
Package variables can be read and set inside package routines.
Package variables are stored in a separate sp_rcontext,
which is cached in THD on the first packate routine call.
- CREATE PACKAGE BODY now supports the initialization section.
- All public routines (i.e. declared in CREATE PACKAGE)
must have implementations in CREATE PACKAGE BODY
- Only public package routines are available outside of the package
- {CREATE|DROP} PACKAGE [BODY] now respects CREATE ROUTINE and ALTER ROUTINE
privileges
- "GRANT EXECUTE ON PACKAGE BODY pkg" is now supported
- SHOW CREATE PACKAGE [BODY] is now supported
- SHOW PACKAGE [BODY] STATUS is now supported
- CREATE and DROP for PACKAGE [BODY] now works for non-current databases
- mysqldump now supports packages
- "SHOW {PROCEDURE|FUNCTION) CODE pkg.routine" now works for package routines
- "SHOW PACKAGE BODY CODE pkg" now works (the package initialization section)
- A new package body level MDL was added
- Recursive calls for package procedures are now possible
- Routine forward declarations in CREATE PACKATE BODY are now supported.
- Package body variables now work as SP OUT parameters
- Package body variables now work as SELECT INTO targets
- Package body variables now support ROW, %ROWTYPE, %TYPE
Lots of changes:
* calculate the current history partition in ::external_lock(),
not in ::write_row() or ::update_row()
* remove dynamically collected per-partition row_end stats
* no full table scan in open_table_from_share to calculate these
stats, no manual MDL/thr_locks in open_table_from_share
* no shared stats in TABLE_SHARE = no mutexes or condition waits when
calculating current history partition
* always compare timestamps, don't convert them to MYSQL_TIME
(avoid DST ambiguity, and it's faster too)
* correct interval handling, 1 month = 1 month, not 30 * 24 * 3600 seconds
* save/restore first partition start time, and count intervals from there
* only allow to drop first partitions if INTERVAL
* when adding new history partitions, split the data in the last history
parition, if it was overflowed
* show partition boundaries in INFORMATION_SCHEMA.PARTITIONS
The problem was that Item_func_hybrid_field_type::get_date() did not
convert the result to the correct data type, so MYSQL_TIME::time_type
of the get_date() result could be not in sync with field_type().
Changes:
1. Adding two new classes Datetime and Date to store MYSQL_TIMESTAMP_DATETIME
and MYSQL_TIMESTAMP_DATE values respectively
(in addition to earlier added class Time, for MYSQL_TIMESTAMP_TIME values).
2. Adding Item_func_hybrid_field_type::time_op().
It performs the operation using TIME representation,
and always returns a MYSQL_TIME value with time_type=MYSQL_TIMESTAMP_TIME.
Implementing time_op() for all affected children classes.
3. Fixing all implementations of date_op() to perform the operation
using strictly DATETIME representation. Now they always return a MYSQL_TIME
value with time_type=MYSQL_TIMESTAMP_{DATE|DATETIME},
according to the result data type.
4. Removing assignment of ltime.time_type to mysql_timestamp_type()
from all val_xxx_from_date_op(), because now date_op() makes sure
to return a proper MYSQL_TIME value with a good time_type (and other member)
5. Adding Item_func_hybrid_field_type::val_xxx_from_time_op().
6. Overriding Type_handler_time_common::Item_func_hybrid_field_type_val_xxx()
to call val_xxx_from_time_op() instead of val_xxx_from_date_op().
7. Modified Item_func::get_arg0_date() to return strictly a TIME value
if TIME_TIME_ONLY is passed, or return strictly a DATETIME value otherwise.
If args[0] returned a value of a different temporal type,
(for example a TIME value when TIME_TIME_ONLY was not passed,
or a DATETIME value when TIME_TIME_ONLY was passed), the conversion
is automatically applied.
Earlier, get_arg0_date() did not guarantee a result in
accordance to TIME_TIME_ONLY flag.
There were two problems related to the bug report:
1. Item_datetime::get_date() was not implemented.
So execution went through val_int() followed
by int-to-datetime or int-to-time conversion.
This was the reason why the optimizer did not
work well on data with fractional seconds.
2. Item_datetime::set() did not have a TIME specific code
to mix months and days to hours after unpack_time().
This is why the optimizer did not work well with negative
TIME values, as well as huge time values.
Changes:
1. Overriding Item_datetime::get_date(), to return ltime.
This fixes the problem N1.
2. Cleanup: Moving pack_time() and unpack_time() from
sql-common/my_time.c and include/my_time.h to
sql/sql_time.cc and sql/sql_time.h, as they are not needed
on the client side.
3. Adding a new "enum_mysql_timestamp_type ts_type" parameter
to unpack_time() and moving the TIME specific code to mix
months and days with hours inside unpack_time().
Adding a new "ts_type" parameter to Item_datetime::set(),
to pass it from the caller down to unpack_time().
So now the TIME specific code is automatically called
from Item_datetime::set(). This fixes the problem N2.
This change also helped to get rid of duplicate TIME specific code
from other three places, where mixing month/days to hours
was done immediately after unpack_time().
Moving the DATE specific code to zero hhmmssff
from Item_func_min_max::get_date_native to inside unpack_time(),
for symmetry.
4. Removing the virtual method in_vector::result_type(),
adding in_vector::type_handler() instead.
This helps to get result_type(), field_type(),
mysql_timestamp_type() of an in_vector easier.
Passing type_handler()->mysql_timestamp_type() as
a new parameter to Item_datetime::set() inside
in_temporal::value_to_item().
5. Cleaup: Removing separate implementations of in_datetime::get_value()
and in_time::get_value(). Adding a single implementation
in_temporal::get_value() instead.
Passing type_handler()->field_type() to get_value_internal().
enum_mark_columns -> enum_column_usage
mark_used_columns -> column_usage
further commits will replace MARK_COLUMN_NONE with
COLUMN_READ and COLUMN_WRITE that convey the intention
without causing columns to be marked
Handle string length as size_t, consistently (almost always:))
Change function prototypes to accept size_t, where in the past
ulong or uint were used. change local/member variables to size_t
when appropriate.
This fix excludes rocksdb, spider,spider, sphinx and connect for now.
- Changing sp_rcontext::m_var_items from list of Item to list of Item_field
- Renaming sp_rcontext::get_item() to get_variable() and changing
its return type from Item* to Item_field *
- Adding sp_rcontext::get_parameter() and sp_rcontext::set_parameter(),
wrappers for get_variable() and set_variable() with extra DBUG_ASSERT.
Using new methods instead of get_variable()/set_variable() in
relevant places.
Setting non_null value drops null_value flag.
Part 1 of 3.
Part 2 will be for 10.3 including change of ps.test results.
Part 3 is test for Connector C.
This preserves const str for constant strings
Other things
- A few variables where changed from LEX_STRING to LEX_CSTRING
- Incident_log_event::Incident_log_event and record_incident where
changed to take LEX_CSTRING* as an argument instead of LEX_STRING
This was done in, among other things:
- thd->db and thd->db_length
- TABLE_LIST tablename, db, alias and schema_name
- Audit plugin database name
- lex->db
- All db and table names in Alter_table_ctx
- st_select_lex db
Other things:
- Changed a lot of functions to take const LEX_CSTRING* as argument
for db, table_name and alias. See init_one_table() as an example.
- Changed some function arguments from LEX_CSTRING to const LEX_CSTRING
- Changed some lists from LEX_STRING to LEX_CSTRING
- threads_mysql.result changed because process list_db wasn't always
correctly updated
- New append_identifier() function that takes LEX_CSTRING* as arguments
- Added new element tmp_buff to Alter_table_ctx to separate temp name
handling from temporary space
- Ensure we store the length after my_casedn_str() of table/db names
- Removed not used version of rename_table_in_stat_tables()
- Changed Natural_join_column::table_name and db_name() to never return
NULL (used for print)
- thd->get_db() now returns db as a printable string (thd->db.str or "")
After MDEV-14212, the Virtual_tmp_table instance that stores a ROW
variable elements is accessible from the underlying Field_row
(rather than Item_field_row).
This patch makes some further changes by moving the code from
sp_instr_xxx, sp_rcontext, Item_xxx to Virtual_tmp_table and Field_xxx.
The data type specific code (scalar vs ROW) now resides in
a new virtual method Field_xxx::sp_prepare_and_store_item().
The the code in sp_rcontext::set_variable() and sp_eval_expr()
is now symmetric for scalar and ROW values.
The code in sp_rcontext::set_variable_row_field(), sp_rcontext::set_variable_row_field(), sp_rcontext::set_variable_row()
is now symmetric for ROW elements (i.e. scalar and ROW elements inside a ROW).
Rationale:
Prepare the code to implement these tasks soon easier:
- MDEV-12252 ROW data type for stored function return values
- MDEV-12307 ROW data type for built-in function return values
- MDEV-6121 Data type: Array
- MDEV-10593 sql_mode=ORACLE: TYPE .. AS OBJECT: basic functionality
- ROW with ROW fields (no MDEV yet)
Details:
1. Moving the code in sp_eval_expr() responsible to backup/restore
thd->count_cuted_fields, thd->abort_on_warning,
thd->transaction.stmt.modified_non_trans_table
into a new helper class Sp_eval_expr_state, to reuse it easier.
Fixing sp_eval_expr() to use this new class.
2. Moving sp_eval_expr() and sp_prepare_func_item() from public functions
to methods in THD, so they can be reused in *.cc files easier without
a need to include "sp_head.h".
Splitting sp_prepare_func_item() into two parts.
Adding a new function sp_fix_func_item(), which fixes
the underlying items, but does not do check_cols() for them.
Reusing sp_fix_func_item() in Field_row::sp_prepare_and_store_item().
3. Moving the code to find ROW fields by name from Item to Virtual_tmp_table
Moving the code searching for ROW fields by their names
from Item_field_row::element_index_by_name() to a new method
Item_field_row to Virtual_tmp_table::sp_find_field_by_name().
Adding wrapper methods sp_rcontext::find_row_field_by_name() and
find_row_field_by_name_or_error(), to search for a ROW variable
fields by the variable offset and its field name.
Changing Item_splocal_row_field_by_name::fix_fields() to do
use sp_rcontext::find_row_field_by_name_or_error().
Removing virtual Item::element_index_by_name().
4. Splitting sp_rcontext::set_variable()
Adding a new virtual method Field::sp_prepare_and_store_item().
Spliting the two branches of the code in sp_rcontext::set_variable()
into two virtual implementations of Field::sp_prepare_and_store_item(),
(for Field and for Field_row).
Moving the former part of sp_rcontext::set_variable() with the loop
doing set_null() for all ROW fields into a new method
Virtual_tmp_table::set_all_fields_to_null() and using it in
Field_row::sp_prepare_and_store_item().
Moving the former part of sp_rcontext::set_variable() with the loop
doing set_variable_row_field() into a new method
Virtual_tmp_table::set_all_fields_from_item() and using it in
Field_row::sp_prepare_and_store_item().
The loop in the new method now uses sp_prepare_and_store_item()
instead of set_variable_row_field(), because saving/restoring
THD flags is now done on the upper level. No needs to save/restore
on every iteration.
5. Fixing sp_eval_expr() to simply do two things:
- backup/restore THD flags
- call result_field->sp_prepare_and_store_item()
So now sp_eval_expr() can be used for both scalar and ROW variables.
Reusing it in sp_rcontext::set_variable*().
6. Moving the loop in sp_rcontext::set_variable_row() into a
new method Virtual_tmp_table::sp_set_all_fields_from_item_list().
Changing the loop body to call field->sp_prepare_and_store_item()
instead of doing set_variable_row_field(). This removes
saving/restoring of the THD flags from every interation.
Instead, adding the code to save/restore the flags around
the entire loop in set_variable_row(), using Sp_eval_expr_state.
So now saving/restoring is done only once for the entire ROW
(a slight performance improvement).
7. Removing the code in sp_instr_set::exec_core() that sets
a variable to NULL if the value evaluation failed.
sp_rcontext::set_variable() now makes sure to reset
the variable properly by effectively calling sp_eval_expr(),
which calls virtual Field::sp_prepare_and_store_item().
Removing the similar code from sp_instr_set_row_field::exec_core()
and sp_instr_set_row_field_by_name::exec_core().
Removing the method sp_rcontext::set_variable_row_field_to_null(),
as it's not used any more.
8. Removing the call for sp_prepare_func_item() from
sp_rcontext::set_variable_row_field(), as it was duplicate:
it was done inside sp_eval_expr(). Now it's done inside
virtual Field::sp_prepare_and_store_item().
9. Moving the code from sp_instr_set_row_field_by_name::exec_core()
into sp_rcontext::set_variable_row_field_by_name(), for symmetry
with other sp_instr_set*::exec_core()/sp_rcontext::set_variable*() pairs.
Now sp_instr_set_row_field_by_name::exec_core() calls
sp_rcontext::set_variable_row_field_by_name().
10. Misc:
- Adding a helper private method sp_rcontext::virtual_tmp_table_for_row(),
reusing it in a new sp_rcontext methods.
- Removing Item_field_row::get_row_field(), as it's not used any more.
- Removing the "Item *result_item" from sp_eval_expr(),
as it's not needed any more.
MDEV-14957: JOIN::prepare gets unusable "conds" as argument
Do not touch merged derived (it is irreversible)
Fix first argument of in_optimizer for calls possible before fix_fields()
Many related changes.
Note that AS OF condition must always be pushed down to physical tables,
it cannot be applied to a derived or a view. Thus:
* no versioning for internal temporary tables, they can never store
historical data.
* remove special versioning code from mysql_derived_prepare and
remove ER_VERS_DERIVED_PROHIBITED - derived can have no historical
data and cannot be prohibited for system versioning related reasons.
* do not expand select list for derived/views with sys vers fields,
derived/views can never have historical data.
* remove special invisiblity rules for sys vers fields, they are no
longer needed after the previous change
* remove system_versioning_hide, it lost the meaning after the
previous change.
* remove ER_VERS_SYSTEM_TIME_CLASH, it's no "clash", the inner
AS OF clause always wins.
* non-versioned fields in a historical query
reword the warning text, downgrade to note, don't
replace values with NULLs
This reverts commit 7603463a46.
The commit itself is fine, however when disabling volatile, compiler
optimizations mess up our double results due to precision differences.
Revert the patch till a proper solution is found.
This was added in c796415943 but would hurt all other compilers
because of Visual Studio. Hopefully this has been fixed now.
Signed-off-by: Daniel Black <daniel@linux.vnet.ibm.com>
This commit implements aggregate stored functions. The basic idea behind
the feature is:
* Implement a special instruction FETCH GROUP NEXT ROW that will pause
the execution of the stored function. When the instruction is reached,
execution of the initial query resumes "as if" the function returned.
This gives the server the opportunity to advance to the next row in the
result set.
* Stored aggregates behave like regular aggregate functions. The
implementation of thus resides in the class Item_sum_sp. Because it is
an aggregate function, for each new row in the group, the
Item_sum_sp::add() method will be called. This is when execution resumes
and the function does another iteration to "add" one extra element to
the final result.
* When the end of group is reached, val_xxx() method will be called for
the item. This case is handled by another execute step for the stored
function, only with a special flag to force a call to the return
handler. See Item_sum_sp::execute() for details.
To allow this pause and resume semantic, we must preserve the function
context across executions. This is stored in Item_sp::sp_query_arena only for
aggregate stored functions, but has no impact for regular functions.
We also enforce aggregate functions to include the "FETCH GROUP NEXT ROW"
instruction.
Signed-off-by: Vicențiu Ciorbaru <vicentiu@mariadb.org>
In preparation for implementing custom aggregate functions, refactor
the common code between regular stored functions and aggregate stored
functions. This includes:
* initialising SP result field
* executing a SP
* access checks
In addition, refactor sp_head::execute_function to take two extra
parameters, a function rcontext and a Query_arena. These two paremeters
were initially initialised and destroyed within
sp_head::execute_function, but for aggregate stored functions we will
require control over their lifetime. The owner of these objects now
becomes Item_sp.
Signed-off-by: Vicențiu Ciorbaru <vicentiu@mariadb.org>
1. Removing data type specific constants from enum_item_param_state,
adding SHORT_DATA_VALUE instead.
2. Replacing tests for Item_param::state for the removed constants to
tests for Type_handler::cmp_type() against {INT|REAL|TIME|DECIAML}_RESULT.
Deriving Item_param::PValue from Type_handler_hybrid_field_type,
to store the data type handler of the current value of the parameter.
3. Moving Item_param::decimal_value and Item_param::str_value_ptr
to Item_param::PValue. Adding Item_param::PValue::m_string
and changing Item_param to use it to store string values,
instead of Item::str_value. The intent is to replace Item_param::value
to a st_value based implementation in the future, to avoid duplicate code.
Adding a sub-class Item::PValue_simple, to implement
Item_param::PValue::swap() easier.
Remaming Item_basic_value::fix_charset_and_length_from_str_value()
to fix_charset_and_length() and adding the "CHARSET_INFO" pointer
parameter, instead of getting it directly from item->str_value.charset().
Changing Item_param to pass value.m_string.charset() instead
of str_value.charset().
Adding a String argument to the overloaded
fix_charset_and_length_from_str_value() and changing Item_param
to pass value.m_string instead of str_value.
4. Replacing the case in Item_param::save_in_field() to a call
for Type_handler::Item_save_in_field().
5. Adding new methods into Item_param::PValue:
val_real(), val_int(), val_decimal(), val_str().
Changing the corresponding Item_param methods
to use these new Item_param::PValue methods
internally. Adding a helper method
Item_param::can_return_value() and removing
duplicate code in Item_param::val_xxx().
6. Removing value.set_handler() from Item_param::set_conversion()
and Type_handler_xxx::Item_param_set_from_value().
It's now done inside Item_param::set_param_func(),
Item_param::set_value() and Item_param::set_limit_clause_param().
7. Changing Type_handler_int_result::Item_param_set_from_value()
to set max_length using attr->max_length instead of
MY_INT64_NUM_DECIMAL_DIGITS, to preserve the data type
of the assigned expression more precisely.
8. Adding Type_handler_hybrid_field_type::swap(),
using it in Item_param::PValue::swap().
9. Moving the data-type specific code from
Item_param::query_val_str(), Item_param::eq(),
Item_param::clone_item() to
Item_param::value_query_type_str(),
Item_param::value_eq(), Item_param::value_clone_item(),
to split the "state" dependent code and
the data type dependent code.
Later we'll split the data type related code further
and add new methods in Type_handler. This will be done
after we replace Item_param::PValue to st_value.
10. Adding asserts into set_int(), set_double(), set_decimal(),
set_time(), set_str(), set_longdata() to make sure that
the value set to Item_param corresponds to the previously
set data type handler.
11. Adding tests into t/ps.test and suite/binlog/t/binlog_stm_ps.test,
to cover Item_param::print() and Item_param::append_for_log()
for LIMIT clause parameters.
Note, the patch does not change the behavior covered by the new
tests. Adding for better code coverage.
12. Adding tests for more precise integer data type in queries like this:
EXECUTE IMMEDIATE
'CREATE OR REPLACE TABLE t1 AS SELECT 999999999 AS a,? AS b'
USING 999999999;
The explicit integer literal and the same integer literal
passed as a PS parameter now produce columns of the same data type.
Re-recording old results in ps.result, gis.result, func_hybrid_type.result
accordingly.
- sql_prepare.cc: Moving functions set_param_xxx() as
methods to Item_param
- Replacing a pointer to a function Item_param::set_param_func
to Type_handler based implementation:
Item_param::value now derives from Type_handler_hybrid_field_type.
Adding new virtual methods Type_handler::Item_param_setup_conversion()
and Type_handler::Item_param_set_param_func()
- Moving declaration of some Item_param members from "public:" to "private:"
(CONVERSION_INFO, value, decimal_value)
- Adding a new method Item_param::set_limit_clause_param(),
to share duplicate code, as well as to encapsulate
Item_param::value.
- Adding Item_param::setup_conversion_string() and
Item_param::setup_conversion_blob() to share
the code for binding from a client value
(mysql_stmt_bind_param), and for binding from
an expression (Item).
- Removing two different functions set_param_str_or_null()
and set_param_str(). Adding a common method Item_param::set_param_str().
Item_param::m_empty_string_is_null, used by Item_param::set_param_str().
- Removing the call for setup_one_conversion_function() from
insert_params_from_actual_params_with_log(). It's not needed,
because the call for ps_param->save_in_param() makes sure
to initialized all data type dependent members properly,
by calling setup_conversion_string() from
Type_handler_string_result::Item_param_set_from_value()
and by calling setup_conversion_blob() from
Type_handler_blob_common::Item_param_set_from_value()
- Cleanup: removing multiplication to MY_CHARSET_BIN_MB_MAXLEN
in a few places. It's 1 anyway, and will never change.
TODO:
- Make get_thd_memroot() inline
- To do this, we need to reduce dependence of include files, especially
so that sql_class.h is not depending in item.h
Item_param::set_value() did not set Item::collation and
Item_param::str_value_ptr.str_charset properly. So both
metadata and data for OUT parameters were sent in a wrong
way to the client.
This patch removes the old implementation of Item_param::set_value()
and rewrites it using Type_handler::Item_param_set_from_value(),
so now setting IN and OUT parameters share the a lot of code.
1. Item_param::set_str() now:
- accepts two additional parameters fromcs, tocs
- sets str_value_ptr, to make sure it's always in sync with str_value,
even without Item_param::convert_str_value()
- does collation.set(tocs, DERIVATION_COERCIBLE),
to make sure that DTCollation is valid even without
Item_param::convert_str_value()
2. Item_param::set_value(), which is used to set OUT parameters,
now reuses Type_handler::Item_param_set_from_value().
3. Cleanup: moving Item_param::str_value_ptr to private,
as it's not needed outside.
4. Cleanup: adding a new virtual method
Settable_routine_parameter::get_item_param()
and using it a few new DBUG_ASSERTs, where
Item_param cannot appear.
After this change:
1. Assigning of IN parameters works as before:
a. Item_param::set_str() is called and sets the value as a binary string
b. The original value is sent to the query used for binary/general logging
c. Item_param::convert_str_value() converts the value from the client
character set to the connection character set
2. Assigning of OUT parameters works in the new way:
a. Item_param::set_str() and sets the value
using the source Item's collation, so both Item::collation
and Item_param::str_value_ptr.str_charset are properly set.
b. Protocol_binary::send_out_parameters() sends the
value to the client correctly:
- Protocol::send_result_set_metadata() uses Item::collation.collation
(which is now properly set), to detect if conversion is needed,
and sends a correct collation ID.
- Protocol::send_result_set_row() calls Type_handler::Item_send_str(),
which uses Item_param::str_value_ptr.str_charset
(which is now properly set) to actually perform the conversion.
Most "new" failures fixed in the following files:
- sql_select.cc
- item.cc
- item_func.cc
- opt_subselect.cc
Other things:
- Allocate udf_handler strings in mem_root
- Required changes in sql_string.h
- Add mem_root as argument to some new [] calls
- Mark udf_handler strings as thread specific
- Removed some comment blocks with code
Issue:
------
VALUES doesn't have a type() function and is considered a
Item_field.
Solution for 5.7:
-----------------
Add a new type() function for Item_values_insert.
On 8.0 and trunk it was fixed by Mithun's Bug#19601973.
Solution for 5.6:
-----------------
Additionally Bug#17458914 is backported.
This will address the problem of using VALUES() in
INSERT ... ON DUPLICATE KEY UPDATE. Create a field object
only if it is in the UPDATE clause, else return a NULL
item.
This will also address the problems mentioned in
Bug#14789787 and Bug#16756402.
Solution for 5.5:
-----------------
As mentioned above Bug#17458914 is backported.
Additionally Bug#14786324 is also backported.
When VALUES() is detected outside its meaningful place,
it should be treated as NULL and is thus replaced with a
Field_null object, with the same name as the original
field.
Fields with type NULL are generally not handled well inside
the server (e.g Innodb will not accept them and it is
impossible to create them in regular tables). So create a
new const NULL item instead.
uses alias in HAVING when sql_mode = 'ONLY_FULL_GROUP_BY'
This patch corrects the patch for bug#18739: non-standard
HAVING extension was allowed in strict ANSI sql mode
added in 2006 by commit 4b7c4cd27f.
As a result of incompleteness of the fix in the above commit
if a query with GROUP BY contained an aggregate function with an
alias and this alias was used in the HAVING clause of the query
the server reported an error when sql_mode was set to
'ONLY_FULL_GROUP_BY'.
Make differentiation between pullout for merge and pulout of outer field during exists2in transformation.
In last case the field was outer and so we can safely start from name resolution context of the SELECT where it was pulled.
Old behavior lead to inconsistence between list of tables and outer name resolution context (which skips one SELECT for merge purposes) which creates problem vor name resolution.
As a result of this merge the code for the following tasks appears in 10.3:
- MDEV-12172 Implement tables specified by table value constructors
- MDEV-12176 Transform [NOT] IN predicate with long list of values INTO
[NOT] IN subquery.
Side effect: the second debug Note in cache_temporal_4265.result disappeared.
Before this change:
- During JOIN::cache_const_exprs(),
Item::get_cache() for Item_date_add_interval() was called.
The data type for date_add('2001-01-01',interval 5 day) is VARCHAR,
because the first argument is VARCHAR (not temporal).
Item_get_cache() created Item_cache_str('2001-01-06').
- During evaluate_join_record(), get_datetime_value() was called,
which called Item::get_date() for Item_cache_str('2001-01-06').
This gave the second Note. Then, get_datetime_value() created
a new cache, now Item_cache_temporal for '2001-01-06', so not
further str_to_datetime() happened.
After this change:
- During tem_bool_rowready_func2::fix_length_and_dec(),
Arg_comparator::set_cmp_func_datetime() is called,
which immediately creates an instance of Item_cache_date for
the result of date_add('2001-01-01',interval 5 day).
So later no str_to_datetime happens any more,
neither during JOIN::cache_const_exprs(),
nor during evaluate_join_record().
- Renaming sp_rcontext::sp to sp_rcontext:m_sp for consistency
with other sp_rcontext_members, and for consistency with the
same purpose member Item_sp_variable::m_sp.
- Passing a "const sp_head*" pointer to sp_rcontext::sp_rcontext()
and to sp_rcontext::create().
Initializing sp_rcontext::m_sp right in the constructor
instead of having a separate initialization after "new sp_rcontext"
or sp_rcontext::create().
- Adding the "const" qualifier to sp_rcontext::m_sp and Item_sp_variable::m_sp
based on:
commit f7316aa0c9
Author: Ajo Robert <ajo.robert@oracle.com>
Date: Thu Aug 24 17:03:21 2017 +0530
Bug#26361149 MYSQL SERVER CRASHES AT: COL IN(IFNULL(CONST,
COL), NAME_CONST('NAME', NULL))
Backport of Bug#19143243 fix.
NAME_CONST item can return NULL_ITEM type in case of incorrect arguments.
NULL_ITEM has special processing in Item_func_in function.
In Item_func_in::fix_length_and_dec an array of possible comparators is
created. Since NAME_CONST function has NULL_ITEM type, corresponding
array element is empty. Then NAME_CONST is wrapped to ITEM_CACHE.
ITEM_CACHE can not return proper type(NULL_ITEM) in Item_func_in::val_int(),
so the NULL_ITEM is attempted compared with an empty comparator.
The fix is to disable the caching of Item_name_const item.
- Implementing stricter data type control for Item_long_func descendants
- Cleanup: renaming Type_handler::can_return_str_ascii() to can_return_text()
(a better name).
- Fix win64 pointer truncation warnings
(usually coming from misusing 0x%lx and long cast in DBUG)
- Also fix printf-format warnings
Make the above mentioned warnings fatal.
- fix pthread_join on Windows to set return value.
This should also fix the MariaDB 10.2.2 bug
MDEV-13826 CREATE FULLTEXT INDEX on encrypted table fails.
MDEV-12634 FIXME: Modify innodb-index-online, innodb-table-online
so that they will write and read merge sort files. InnoDB 5.7
introduced some optimizations to avoid using the files for small tables.
Many collation test results have been adjusted for MDEV-10191.
The problem was introduced by the patch for MDEV-7661,
which (in addition to the fix itself) included an attempt to make
CONVERT/CAST work in the same way with fields
(i.e. return NULL in strict mode if a non-convertable character found).
It appeared to be a bad idea and some users were affected by this
behavior change. Changing CONVERT/CAST not depend on sql_mode
(restoring pre-10.1.4 behavior).
If compiling a non DBUG binary with
-DDBUG_ASSERT_AS_PRINTF asserts will be
changed to printf + stack trace (of stack
trace are enabled).
- Changed #ifndef DBUG_OFF to
#ifdef DBUG_ASSERT_EXISTS
for those DBUG_OFF that was just used to enable
assert
- Assert checking that could greatly impact
performance where changed to DBUG_ASSERT_SLOW which
is not affected by DBUG_ASSERT_AS_PRINTF
- Added one extra option to my_print_stacktrace() to
get more silent in case of stack trace printing as
part of assert.
- Simplified use_trans_cache() to return at once if is_transactional is set
- Indentation and spelling errors fixed
- Don't call signal_update() if update_binlog_end_pos() is called as the
function already calls signal_update()
- Removed not used function wait_for_update_bin_log(), which would cause
errors if ever used.
- Simplified handler::clone() by always allocating 'ref' in ha_open(). To do
this I added an optional MEM_ROOT argument to ha_open() to be used when
allocating 'ref'
- Changed arguments to get_system_var() from LEX_CSTRING to LEX_CSTRING*
- Added THD as argument to create_select_for_variable(). Changed also char*
argument to LEX_CSTRING to avoid strlen() call.
- Change calls to append() to use LEX_CSTRING
- Added sql/mariadb.h file that should be included first by files in sql
directory, if sql_plugin.h is not used (sql_plugin.h adds SHOW variables
that must be done before my_global.h is included)
- Removed a lot of include my_global.h from include files
- Removed include's of some files that my_global.h automatically includes
- Removed duplicated include's of my_sys.h
- Replaced include my_config.h with my_global.h
