mysql_client_binlog_statement
Problem: server may read from unassigned memory performing
"wrong" BINLOG queries.
Fix: never read from unassigned memory.
mysql-test/suite/binlog/r/binlog_base64_flag.result:
Fix for bug #54393: crash and/or valgrind errors in
mysql_client_binlog_statement
- test result.
mysql-test/suite/binlog/t/binlog_base64_flag.test:
Fix for bug #54393: crash and/or valgrind errors in
mysql_client_binlog_statement
- test case.
sql/sql_binlog.cc:
Fix for bug #54393: crash and/or valgrind errors in
mysql_client_binlog_statement
- coded_len should not count trailing '/0';
- never read from unassigned memory.
The default storage engine is changed from MyISAM to
InnoDB, in all builds except for the embedded server.
In addition, the following system variables are
changed:
* innodb_file_per_table is enabled
* innodb_strict_mode is enabled
* innodb_file_format_name_update is changed
to 'Barracuda'
The test suite is changed so that tests that do not
explicitly include the have_innodb.inc are run with
--default-storage-engine=MyISAM. This is to ease the
transition, so that most regression tests are run
with the same engine as before.
Some tests are disabled for the embedded server
regression test, as the output of certain statements
will be different that for the regular server
(i.e SELECT @@default_storage_engine). This is to
ease transition.
mysql-test/mysql-test-run.pl:
The regression test suite now adds a
--default-storage-engine=MyISAM for all non-innodb
tests. This behaviour can be controlled by the
default-myisam switch in mysql-test-run
mysql-test/t/bootstrap-master.opt:
The bootstrap test can only be run without InnoDB
as it starts several mysqld instances on the same
datadir. This is possible with MyISAM, but not
with InnoDB.
storage/innobase/CMakeLists.txt:
Build InnoDB per default
storage/innobase/handler/ha_innodb.cc:
Change default values for system variables
Enable file_per_table
Enable strict_mode
Upgrade default file format to Barracuda
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Added test cases to verify the expected behaviour of :
SET SESSION TRANSACTION ISOLATION LEVEL,
SET TRANSACTION ISOLATION LEVEL,
@@completion_type,
COMMIT AND CHAIN,
ROLLBACK AND CHAIN
..and some combinations of the above
Conflicts:
Text conflict in mysql-test/r/archive.result
Contents conflict in mysql-test/r/innodb_bug38231.result
Text conflict in mysql-test/r/mdl_sync.result
Text conflict in mysql-test/suite/binlog/t/disabled.def
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result
Text conflict in mysql-test/t/archive.test
Contents conflict in mysql-test/t/innodb_bug38231.test
Text conflict in mysql-test/t/mdl_sync.test
Text conflict in sql/sp_head.cc
Text conflict in sql/sql_show.cc
Text conflict in sql/table.cc
Text conflict in sql/table.h
errors
In the fix of BUG#39934 in 5.1-rep+3, errors are generated when
binlog_format=row and a statement modifies a table restricted to
statement-logging (ER_BINLOG_ROW_MODE_AND_STMT_ENGINE); or if
binlog_format=statement and a statement modifies a table restricted to
row-logging (ER_BINLOG_STMT_MODE_AND_ROW_ENGINE).
However, some DDL statements that lock tables (e.g. ALTER TABLE,
CREATE INDEX and CREATE TRIGGER) were causing spurious errors,
although no row might be inserted into the binary log.
To fix the problem, we tagged statements that may generate
rows into the binary log and thence the warning messages are
only printed out when the appropriate conditions hold and rows
might be changed.
sql/log_event.cc:
Reorganized the Query_log_event's constructor based on the
CF_CAN_GENERATE_ROW_EVENTS flag and as such any statement
that has the associated flag should go through a cache
before being written to the binary log.
sql/share/errmsg-utf8.txt:
Improved the error message ER_BINLOG_UNSAFE_MIXED_STATEMENT according to Paul's
suggestion.
sql/sql_class.cc:
Created a hook to be used by innodb that checks if a statement
may write rows to the binary log. In other words, if it has
the CF_CAN_GENERATE_ROW_EVENTS flag associated.
sql/sql_class.h:
Defined the CF_CAN_GENERATE_ROW_EVENTS flag.
sql/sql_parse.cc:
Updated the sql_command_flags and added a function to check the
CF_CAN_GENERATE_ROW_EVENTS.
sql/sql_parse.h:
Added a function to check the CF_CAN_GENERATE_ROW_EVENTS.
storage/innobase/handler/ha_innodb.cc:
Added a call to the hook thd_generates_rows().
storage/innobase/handler/ha_innodb.h:
Defined an external reference to the hook thd_generates_rows().
The thd->variables.option_bits & OPTION_BIN_LOG is currently abused:
it's both a system variable and an implementation switch. The current
approach to this option bit breaks the session variable encapsulation.
Besides it is allowed to change @@session.sql_bin_log within a
transaction what may lead to not correctly logging a transaction.
To fix the problems, we created a thd->variables variable to represent
the "sql_log_bin" and prohibited its update inside a transaction or
sub-statement.
mysql-test/suite/binlog/r/binlog_stm_unsafe_warning.result:
Updated result file. The reason the warnings are removed is
related to BUG#50312.
mysql-test/suite/binlog/r/binlog_switch_inside_trans.result:
Checks when is possible to change the option @@session.sql_log_bin.
mysql-test/suite/binlog/t/binlog_switch_inside_trans.test:
Checks when is possible to change the option @@session.sql_log_bin.
mysql-test/suite/rpl/r/rpl_non_direct_stm_mixing_engines.result:
Updated the result file with warnings that were being printed
due to the wrong use of the thd->variables.option_bits and
sql_log_bin_top_level variables.
mysql-test/suite/rpl/r/rpl_stm_mixing_engines.result:
Updated the result file with warnings that were being printed
due to the wrong use of the thd->variables.option_bits and
sql_log_bin_top_level variables.
sql/share/errmsg-utf8.txt:
Introduces two error messages to notify that the @@session.sql_log_bin
cannot be changed inside a sub-statement or transaction.
sql/sql_base.cc:
Removes the variable sql_log_bin_toplevel and uses
the session variable sql_log_bin.
sql/sql_class.cc:
Replaces the variable sql_log_bin_toplevel by the
(variables.option_bits & OPTION_BIN_LOG).
sql/sql_class.h:
Removes the variable sql_log_bin_toplevel and creates
a session variable sql_log_bin.
sql/sys_vars.cc:
Checks when the sql_log_bin can be correctly updated.
The problem was that TRUNCATE TABLE didn't take a exclusive
lock on a table if it resorted to truncating via delete of
all rows in the table. Specifically for InnoDB tables, this
could break proper isolation as InnoDB ends up aborting some
granted locks when truncating a table.
The solution is to take a exclusive metadata lock before
TRUNCATE TABLE can proceed. This guarantees that no other
transaction is using the table.
Incompatible change: Truncate via delete no longer fails
if sql_safe_updates is activated (this was a undocumented
side effect).
libmysqld/CMakeLists.txt:
Add new files to the build list.
libmysqld/Makefile.am:
Add new files to the build list.
mysql-test/extra/binlog_tests/binlog_truncate.test:
Add test case for Bug#42643
mysql-test/include/mix1.inc:
Update test case as TRUNCATE TABLE now grabs a exclusive lock.
Ensure that TRUNCATE waits for granted locks on the table.
mysql-test/suite/binlog/t/binlog_truncate_innodb.test:
As with other data modifying statements, TRUNCATE is still not
possible in a transaction with isolation level READ COMMITTED
or READ UNCOMMITED. It would be possible to implement so, but
it is not worth the effort.
mysql-test/suite/binlog/t/binlog_truncate_myisam.test:
Test under different binlog formats.
mysql-test/suite/binlog/t/disabled.def:
Re-enable test case.
mysql-test/t/innodb_bug38231.test:
Truncate no longer works with row-level locks.
mysql-test/t/mdl_sync.test:
Ensure that a acquired lock is not given up due to a conflict.
mysql-test/t/partition_innodb_semi_consistent.test:
End transaction as to release metadata locks.
mysql-test/t/truncate.test:
A metadata lock is now taken before the object is verified.
sql/CMakeLists.txt:
Add new files to the build list.
sql/Makefile.am:
Add new files to the build list.
sql/datadict.cc:
Introduce a new file specific for data dictionary operations.
sql/datadict.h:
Add header file.
sql/sql_base.cc:
Rename data dictionary function.
sql/sql_bitmap.h:
Include dependency.
sql/sql_delete.cc:
Move away from relying on mysql_delete() to delete all rows of
a table. Thus, move any bits related to truncate to sql_truncate.cc
sql/sql_delete.h:
Remove parameter.
sql/sql_parse.cc:
Add protection against the global read lock -- a intention
exclusive lock can be acquired in the truncate path.
sql/sql_show.cc:
Add sync point for testing scenarios where a pending flush
is ignored.
sql/sql_truncate.cc:
Acquire a shared metadata lock before accessing table metadata.
Upgrade the lock to a exclusive one if the table can be re-created.
Rework binlog rules to better reflect the requirements.
sql/sql_yacc.yy:
Set appropriate lock types for table to be truncated.
sql/table.h:
Move to data dictionary header.
Some of the test cases reference to binlog position and
these position numbers are written into result explicitly.
It is difficult to maintain if log event format changes.
There are a couple of cases explicit position number appears,
we handle them in different ways
A. 'CHANGE MASTER ...' with MASTER_LOG_POS or/and RELAY_LOG_POS options
Use --replace_result to mask them.
B. 'SHOW BINLOG EVENT ...'
Replaced by show_binlog_events.inc or wait_for_binlog_event.inc.
show_binlog_events.inc file's function is enhanced by given
$binlog_file and $binlog_limit.
C. 'SHOW SLAVE STATUS', 'show_slave_status.inc' and 'show_slave_status2.inc'
For the test cases just care a few items in the result of 'SHOW SLAVE STATUS',
only the items related to each test case are showed.
'show_slave_status.inc' is rebuild, only the given items in $status_items
will be showed.
'check_slave_is_running.inc' and 'check_slave_no_error.inc'
and 'check_slave_param.inc' are auxiliary files helping
to show running status and error information easily.
mysql-test/extra/binlog_tests/binlog.test:
It only cares whether current binlog file index is changed, so it is ok
with 'show_master_status.inc' instead of 'show mater status'.
mysql-test/extra/binlog_tests/blackhole.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_deadlock.test:
Use 'check_slave_is_running.inc' instead of 'show_slave_status2.inc'.
mysql-test/extra/rpl_tests/rpl_extraMaster_Col.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/extra/rpl_tests/rpl_extraSlave_Col.test:
Use 'wait_for_slave_sql_error.inc' and 'ait_for_slave_sql_error_and_skip.inc' instead of 'show slave status'.
mysql-test/extra/rpl_tests/rpl_flsh_tbls.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_get_master_version_and_clock.test:
It is need now to give a error number, so use 'wait_for_slave_io_to_stop.inc'
instead of 'wait_for_slave_io_error.inc'.
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_log.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
se 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/extra/rpl_tests/rpl_max_relay_size.test:
se 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/extra/rpl_tests/rpl_ndb_apply_status.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_reset_slave.test:
Use 'show_slave_status.inc' instead of 'show_slave_status2.inc' statement.
Use 'check_slave_no_error.inc' to simplify the check that there is no error.
mysql-test/extra/rpl_tests/rpl_row_basic.test:
Use 'check_slave_is_running.inc' to verify that Slave threads are running well.
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
mysql-test/extra/rpl_tests/rpl_row_tabledefs.test:
Use 'show_slave_error_status_and_skip.inc' instead of 'show slave status'.
mysql-test/include/check_slave_is_running.inc:
To make sure both sql and io thread are running well. If not, the test will be aborted.
mysql-test/include/check_slave_no_error.inc:
To make sure both sql and io thread have no error. If not, the test will be aborted.
mysql-test/include/get_relay_log_pos.inc:
According to the position of a log event in master binlog file,
find the peer position of a log event in relay log file.
mysql-test/include/rpl_stmt_seq.inc:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/include/show_binlog_events.inc:
Add two options $binlog_file and $binlog_limit for showing binlog events from different binlog files or/and given different limits on position or row number.
mysql-test/include/show_rpl_debug_info.inc:
Add 'SELECT NOW()' in the debug information.
mysql-test/include/show_slave_status.inc:
It's more clean and tidy Only the given columns of slave status are printed.
mysql-test/include/test_fieldsize.inc:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/include/wait_for_binlog_event.inc:
Use show_rpl_debug_info.inc instead of 'SHOW BINLOG EVENTS'.
mysql-test/include/wait_for_slave_io_error.inc:
Add $slave_io_errno and $show_slave_io_error, it waits only a given error.
mysql-test/include/wait_for_slave_param.inc:
Use die instead of exit.
mysql-test/include/wait_for_slave_sql_error.inc:
Add $slave_sql_errno and $show_slave_sql_error, it waits only a given error.
mysql-test/include/wait_for_status_var.inc:
Use die instead of exit.
mysql-test/r/flush_block_commit_notembedded.result:
It checks whether somethings are binlogged, so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/r/multi_update.result:
It checks whether somethings are binlogged, so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/binlog/r/binlog_innodb.result:
It checks whether somethings are binlogged, so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/binlog/r/binlog_row_binlog.result:
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/binlog/r/binlog_stm_binlog.result:
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/binlog/t/binlog_innodb.test:
It checks whether somethings are binlogged, so we use 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/binlog/t/binlog_stm_binlog.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/bugs/r/rpl_bug36391.result:
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/bugs/t/rpl_bug12691.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/bugs/t/rpl_bug36391.test:
'show master status' is replaced by 'show_master_status.inc'.
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/engines/funcs/r/rpl_000015.result:
It checks whether somethings are binlogged,
so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/engines/funcs/t/rpl_000015.test:
Use 'check_slave_is_running.inc' to verify that Slave threads are running well.
mysql-test/suite/engines/funcs/t/rpl_REDIRECT.test:
Use 'query_vertical SHOW SLAVE STATUS' instead of 'show slave status'.
There is no status columns in the result file, for no slave exists on master's server.
mysql-test/suite/engines/funcs/t/rpl_change_master.test:
This test just care whether Read_Master_Log_Pos is equal to Exec_Master_Log_Pos after 'CHANGE MASTER ..'. So 'show slave status' is removed and just check the value of Read_Master_Log_Pos and Exec_Master_Log_Pos.
mysql-test/suite/engines/funcs/t/rpl_empty_master_crash.test:
We doesn't really need the statement.
mysql-test/suite/engines/funcs/t/rpl_flushlog_loop.test:
Just show Relay_Log_File, running status and error informations.
Use 'check_slave_is_running.inc' to verify that Slave threads are running well.
mysql-test/suite/engines/funcs/t/rpl_loaddata_s.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/engines/funcs/t/rpl_log_pos.test:
Mask the explicit positions in the result file.
Use 'check_slave_no_error.inc' to simplify the check that there is no error.
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/engines/funcs/t/rpl_rbr_to_sbr.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/engines/funcs/t/rpl_row_drop.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/engines/funcs/t/rpl_row_inexist_tbl.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/engines/funcs/t/rpl_row_until.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and use binlog position variables instead of explicit number in the 'CHANGE MASTER' statements.
Mask the explicit binary log positions in the result file.
mysql-test/suite/engines/funcs/t/rpl_server_id1.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
Use 'check_slave_no_error.inc' to simplify the check that there is no error.
mysql-test/suite/engines/funcs/t/rpl_server_id2.test:
It doesn't really need in this test.
mysql-test/suite/engines/funcs/t/rpl_slave_status.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/engines/funcs/t/rpl_switch_stm_row_mixed.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/manual/t/rpl_replication_delay.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/parts/t/rpl_partition.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/include/rpl_mixed_ddl.inc:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/include/rpl_mixed_dml.inc:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_000015.test:
Use 'show_slave_status.inc' instead of 'show_slave_status2.inc'.
mysql-test/suite/rpl/t/rpl_binlog_grant.test:
Use 'wait_for_binlog_event.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_bug33931.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_change_master.test:
This test just care whether Read_Master_Log_Pos is equal to Exec_Master_Log_Pos after 'CHANGE MASTER ..'. So 'show slave status' is removed and just check the value of Read_Master_Log_Pos and Exec_Master_Log_Pos.
mysql-test/suite/rpl/t/rpl_critical_errors.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_dual_pos_advance.test:
Mask the explicit position numbers in result file.
It is restricted running on SBR, for it want to binlog 'set @a=1' statement.
mysql-test/suite/rpl/t/rpl_empty_master_crash.test:
It doesn't need in this test.
mysql-test/suite/rpl/t/rpl_flushlog_loop.test:
UUse 'check_slave_is_running.inc' and 'show_slave_status.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test:
Use 'wait_for_slave_io_error.inc' to wait the given io thread error happening.
mysql-test/suite/rpl/t/rpl_grant.test:
It doesn't need in this test.
mysql-test/suite/rpl/t/rpl_incident.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/t/rpl_known_bugs_detection.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_loaddata_fatal.test:
Use 'wait_for_slave_sql_error_and_skip.inc' to wait the given sql thread error happening and then skip the event. There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_log_pos.test:
Use 'wait_for_slave_io_error.inc' to wait the given io thread error happening.
There is no need to print the result of 'show slave status'.
mysql-test/suite/rpl/t/rpl_rbr_to_sbr.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_replicate_do.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/rpl/t/rpl_rotate_logs.test:
Use 'show_slave_status.inc' instead of 'show_slave_status2.inc'.
mysql-test/suite/rpl/t/rpl_row_basic_11bugs.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_row_create_table.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_row_drop.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_row_until.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and use binlog position variables instead of explicit number in the 'CHANGE MASTER' statements.
mysql-test/suite/rpl/t/rpl_skip_error.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/t/rpl_slave_load_remove_tmpfile.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave status'.
mysql-test/suite/rpl/t/rpl_slave_skip.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and mask the explicit position number in the 'CHANGE MASTER' statements.
mysql-test/suite/rpl/t/rpl_sp.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_ssl.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/rpl/t/rpl_ssl1.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/rpl/t/rpl_stm_until.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and use binlog position variables instead of explicit number in the 'CHANGE MASTER' statements.
mysql-test/suite/rpl/t/rpl_temporary_errors.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_basic.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave status'.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_simplex.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_idempotent.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_multi.test:
Mask master_log_pos and master_log_file
mysql-test/suite/rpl_ndb/t/rpl_ndb_sync.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_truncate_7ndb.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/alter_table-big.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/create-big.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/ctype_cp932_binlog_stm.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/flush_block_commit_notembedded.test:
It checks whether somethings are binlogged,
so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/t/multi_update.test:
It checks whether somethings are binlogged,
so we using 'wait_binlog_event.inc' instead of 'show master status'.
mysql-test/t/sp_trans_log.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
------------------------------------------------------------
revno: 3094
revision-id: vasil.dimov@oracle.com-20100513074652-0cvlhgkesgbb2bfh
parent: vasil.dimov@oracle.com-20100512173700-byf8xntxjur1hqov
committer: Vasil Dimov <vasil.dimov@oracle.com>
branch nick: mysql-trunk-innodb
timestamp: Thu 2010-05-13 10:46:52 +0300
message:
Followup to Bug#51920, fix binlog.binlog_killed
This is a followup to the fix of
Bug#51920 Innodb connections in row lock wait ignore KILL until lock wait
timeout
in that fix (rb://279) the behavior was changed to honor when a trx is
interrupted during lock wait, but the returned error code was still
"lock wait timeout" when it should be "interrupted".
This change fixes the non-deterministically failing test binlog.binlog_killed,
that failed like this:
binlog.binlog_killed 'stmt' [ fail ]
Test ended at 2010-05-12 11:39:08
CURRENT_TEST: binlog.binlog_killed
mysqltest: At line 208: query 'reap' failed with wrong errno 1205: 'Lock wait timeout exceeded; try restarting transaction', instead of 0...
Approved by: Sunny Bains (rb://344)
------------------------------------------------------------
This merge is non-trivial since it has to introduce the DB_INTERRUPTED
error code.
Also revert vasil.dimov@oracle.com-20100408165555-9rpjh24o0sa9ad5y
which adjusted the binlog.binlog_killed test to the new (wrong) behavior
Bug#20837 Apparent change of isolation level during transaction,
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense,
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Make thd->tx_isolation mean strictly "current transaction
isolation level"
Make thd->variables.tx_isolation mean "current session isolation
level".
The current transaction isolation level is now established
at transaction start. If there was a SET TRANSACTION
ISOLATION LEVEL statement, the value is taken from it.
Otherwise, the session value is used.
A change in a session value, made while a transaction is active,
whereas still allowed, no longer has any effect on the
current transaction isolation level. This is an incompatible
change.
A change in a session isolation level, made while there is
no active transaction, overrides SET TRANSACTION statement,
if there was any.
Changed the impelmentation to not look at @@session.completion_type
in the parser, and thus fixed Bug#53346.
Changed the parser to not allow AND NO CHAIN RELEASE,
and thus fixed Bug#46527.
Changed the transaction API to take the current transaction
isolation level into account:
- BEGIN/COMMIT now do preserve the current transaction
isolation level if chaining is on.
- implicit commit, XA COMMIT or XA ROLLBACK or autocommit don't.
parallel mode
The failure has nothing to do with parallel, but rather on the
order the tests are executed. In this case, the test
binlog_tmp_table (lets call it test2) was not ensuring that the
binary logs would be reset when it started. Later the test issues
a mysqlbinlog .../master-bin.000002 | mysql ... If the test that
was executed before this one (lets call it test1) had issued a
flush logs, then the file in use in test1 (master-bin.000002)
would not actually match the one that was expected. Eventually,
this would cause the statements logged in test1 to be replayed,
instead of the ones logged in the beginning of test2.
We fix this by:
1. adding RESET MASTER to the beginning of binlog_tmp_table
2. setting dynamically the file to use in binlog_tmp_table
Only #1 was needed, but the two make the tests cases more robust.
transaction
BUG#52616 Temp table prevents switch binlog format from STATEMENT to ROW
Before the WL#2687 and BUG#46364, every non-transactional change that happened
after a transactional change was written to trx-cache and flushed upon
committing the transaction. WL#2687 and BUG#46364 changed this behavior and
non-transactional changes are now written to the binary log upon committing
the statement.
A binary log event is identified as transactional or non-transactional through
a flag in the Log_event which is set taking into account the underlie storage
engine on what it is stems from. In the current bug, this flag was not being
set properly when the DROP TEMPORARY TABLE was executed.
However, while fixing this bug we figured out that changes to temporary tables
should be always written to the trx-cache if there is an on-going transaction.
Otherwise, binlog events in the reversed order would be produced.
Regarding concurrency, keeping changes to temporary tables in the trx-cache is
also safe as temporary tables are only visible to the owner connection.
In this patch, we classify the following statements as unsafe:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
On the other hand, the following statements are classified as safe:
1 - INSERT INTO t_innodb SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_innodb
The patch also guarantees that transactions that have a DROP TEMPORARY are
always written to the binary log regardless of the mode and the outcome:
commit or rollback. In particular, the DROP TEMPORARY is extended with the
IF EXISTS clause when the current statement logging format is set to row.
Finally, the patch allows to switch from STATEMENT to MIXED/ROW when there
are temporary tables but the contrary is not possible.
mysql-test/extra/rpl_tests/rpl_binlog_max_cache_size.test:
Updated the test case because
CREATE TEMPORARY TABLE t_innodb_temp SELECT * FROM t_myisam is not unsafe.
mysql-test/extra/rpl_tests/rpl_implicit_commit_binlog.test:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/extra/rpl_tests/rpl_innodb.test:
Removed comments from the test case that became false after the patch.
mysql-test/extra/rpl_tests/rpl_loaddata.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
mysql-test/include/ctype_utf8_table.inc:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
mysql-test/r/ctype_cp932_binlog_stm.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/r/binlog_database.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/r/binlog_innodb_row.result:
Updated the result file.
mysql-test/suite/binlog/r/binlog_multi_engine.result:
Updated the unsafe message.
mysql-test/suite/binlog/r/binlog_row_binlog.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/r/binlog_row_drop_tmp_tbl.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/r/binlog_stm_binlog.result:
Updated the result file.
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/t/binlog_tmp_table.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
mysql-test/suite/ndb/r/ndb_binlog_format.result:
Updated the unsafe message.
mysql-test/suite/rpl/r/rpl_concurrency_error.result:
Updated the unsafe message.
mysql-test/suite/rpl/r/rpl_mixed_binlog_max_cache_size.result:
Updated the result file because
CREATE TEMPORARY TABLE t_innodb_temp SELECT * FROM t_myisam is not unsafe.
mysql-test/suite/rpl/r/rpl_mixed_implicit_commit_binlog.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_mixed_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_mixed_row_innodb.result:
Added some comments to ease the understanding of the result file.
mysql-test/suite/rpl/r/rpl_non_direct_mixed_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_non_direct_row_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_non_direct_stm_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_row_drop.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_row_implicit_commit_binlog.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_row_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_stm_binlog_max_cache_size.result:
Updated the result file because
CREATE TEMPORARY TABLE t_innodb_temp SELECT * FROM t_myisam is not unsafe.
mysql-test/suite/rpl/r/rpl_stm_implicit_commit_binlog.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_stm_innodb.result:
Added some comments to ease the understanding of the result file.
mysql-test/suite/rpl/r/rpl_stm_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_stm_stop_middle_group.result:
Updated the unsafe message.
mysql-test/suite/rpl/r/rpl_temp_temporary.result:
Added a test case.
mysql-test/suite/rpl/t/rpl000013.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
mysql-test/suite/rpl/t/rpl_misc_functions.test:
Suppressed warning messages.
mysql-test/suite/rpl/t/rpl_temp_table.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
mysql-test/suite/rpl/t/rpl_temp_temporary.test:
Added a test case.
mysql-test/suite/rpl/t/rpl_temporary.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
mysql-test/suite/rpl_ndb/r/rpl_ndb_row_implicit_commit_binlog.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl_ndb/r/rpl_truncate_7ndb.result:
Updated the test case to remove references to positions
in the binary log.
mysql-test/suite/rpl_ndb/t/rpl_truncate_7ndb.test:
Updated the test case to remove references to positions
in the binary log.
mysql-test/t/create_select_tmp.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
mysql-test/t/ctype_cp932_binlog_stm.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
mysql-test/t/mysqlbinlog.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
sql/log.cc:
Improved the code by creating several functions to hide decision
on type of engine changed, commit/abort, etc:
. stmt_has_updated_non_trans_table
. trans_has_updated_non_trans_table
. ending_trans
Updated the binlog_rollback function and the use of the
OPTION_KEEP_LOG which indincates when a temporary table was
either created or dropped and as such the command must be
logged if not in MIXED mode and even while rolling back the
transaction.
sql/log.h:
Improved the code by creating several functions to hide decision
on type of engine changed, commit/abort, etc.
sql/log_event.cc:
Removed the setting of the OPTION_KEEP_LOG as it is related to CREATE
TEMPORARY and DROP TEMPORARY and not to the type of engine (i.e.
transactional or non-transactional).
sql/log_event_old.cc:
Removed the setting of the OPTION_KEEP_LOG as it is related to CREATE
TEMPORARY and DROP TEMPORARY and not to the type of engine (i.e.
transactional or non-transactional).
sql/share/errmsg-utf8.txt:
Updated the unsafe message.
sql/sql_class.cc:
Classifies the following statements as unsafe:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
On the other hand, the following statements are classified as safe:
1 - INSERT INTO t_innodb SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_innodb
sql/sql_class.h:
It allows to switch from STATEMENT to MIXED/ROW when there are temporary
tables but the contrary is not possible.
sql/sql_table.cc:
Fixed the case that a DROP/DROP TEMPORARY that affects a temporary table in MIXED
mode is written as a DROP TEMPORARY TABLE IF EXISTS because the table may not exist in the slave and due to the IF EXISTS token an error will never happen
while processing the statement in the slave.
Removed a function that was not being used.
Conflicts:
Text conflict in client/mysqlbinlog.cc
Text conflict in mysql-test/Makefile.am
Text conflict in mysql-test/collections/default.daily
Text conflict in mysql-test/r/mysqlbinlog_row_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_typeconv_innodb.result
Text conflict in mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test
Text conflict in mysql-test/suite/rpl/t/rpl_row_create_table.test
Text conflict in mysql-test/suite/rpl/t/rpl_slave_skip.test
Text conflict in mysql-test/suite/rpl/t/rpl_typeconv_innodb.test
Text conflict in mysys/charset.c
Text conflict in sql/field.cc
Text conflict in sql/field.h
Text conflict in sql/item.h
Text conflict in sql/item_func.cc
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/rpl_utility.cc
Text conflict in sql/rpl_utility.h
Text conflict in sql/set_var.cc
Text conflict in sql/share/Makefile.am
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_plugin.cc
Text conflict in sql/sql_select.cc
Text conflict in sql/sql_table.cc
Text conflict in storage/example/ha_example.h
Text conflict in storage/federated/ha_federated.cc
Text conflict in storage/myisammrg/ha_myisammrg.cc
Text conflict in storage/myisammrg/myrg_open.c
Conflicts:
Text conflict in client/mysqlbinlog.cc
Text conflict in mysql-test/r/explain.result
Text conflict in mysql-test/r/subselect.result
Text conflict in mysql-test/r/subselect3.result
Text conflict in mysql-test/r/type_datetime.result
Text conflict in sql/share/Makefile.am
The test case added in previous patch missed a RESET MASTER on
test start up. Without it, showing binary log contents can
sometimes show spurious entries from previously executed tests,
ultimately causing test failure - result mismatch.
The test file was added in:
revid:luis.soares@sun.com-20100224190153-k0bpdx9abe88uoo2
This patch also moves the test case into binlog_innodb_row.test
file. This way we avoid having yet another test file,
binlog_row_innodb_truncate.test, whose only purpose is to host
one test case. This had been actually suggested during original
patch review, but somehow the binlog_innodb_row was missed when
searching for a file to host the test case.
+ failing statements
Implicit DROP event for temporary table is not getting
LOG_EVENT_THREAD_SPECIFIC_F flag, because, in the previous
executed statement in the same thread, which might even be a
failed statement, the thread_specific_used flag is set to
FALSE (in mysql_reset_thd_for_next_command) and not set to TRUE
before connection is shutdown. This means that implicit DROP
event will take the FALSE value from thread_specific_used and
will not set LOG_EVENT_THREAD_SPECIFIC_F in the event header. As
a consequence, mysqlbinlog will not print the pseudo_thread_id
from the DROP event, because one of the requirements for the
printout is that this flag is set to TRUE.
We fix this by setting thread_specific_used whenever we are
binlogging a DROP in close_temporary_tables, and resetting it to
its previous value afterward.
For temporary tables that are created with an engine that does
not provide the HTON_CAN_RECREATE, the truncate operation is
performed resorting to the optimized handler::ha_delete_all_rows
method. However, this means that the truncate will share
execution path, from mysql_delete, with truncate on regular
tables and other delete operations. As a consequence the truncate
operation, for the temporary table is logged, even if in row mode
because there is no distinction between this and the other delete
operations at binlogging time.
We fix this by checking if: (i) the binlog format, when the
truncate operation was issued, is ROW; (ii) if the operation is a
truncate; and (iii) if the table is a temporary table; before
writing to the binary log. If all three conditions are met, we
skip writing to the binlog. A side effect of this fix is that we
limit the scope of setting and resetting the
current_stmt_binlog_row_based. Now we just set and reset it
inside mysql_delete in the boundaries of the
handler::ha_write_row loop. This way we have access to
thd->current_stmt_binlog_row_based real value inside
mysql_delete.
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
Updated result for spurious truncate table.
mysql-test/suite/binlog/t/binlog_row_innodb_truncate.test:
Test case.
sql/sql_delete.cc:
Added check in mysql_delete before writing the TRUNCATE statement
to the binary log. Additionally, removed the set/reset of
current_stmt_binlog_row_based so that it happens just in the
boundaries of the handler::ha_write_row loop inside mysql_delete.
SUPER_ACL should be checked unconditionally while verifying if the binlog_format
or the binlog_direct_non_transactional_updates might be changed.
Roughly speaking, both session values cannot be changed in the context of a
transaction or a stored function. Note that changing the global value does
not cause any effect until a new connection is created.
So, we fixed the problem by first checking the permissions and right after further
verifications are ignored if the global value is being updated. In this patch, we
also re-structure the test case to make it more readable.
1. Now test use fake_relay_log primitive
2. Added RESET SLAVE to include/setup_fake_relay_log.inc for removing relay log info file
3. Added RESET SLAVE to include/cleanup_fake_relay_log.inc
4. Test moved to rpl suite as rpl_binlog_auto_inc_bug33029.test
5. Updated result file
mysql-test/t/disabled.def:
Restore disabled ssl tests: SSL certificates were updated.
Disable sp_sync.test, the test case can't work in next-4284.
mysql-test/t/partition_innodb.test:
Disable parsing of the test case for Bug#47343,
the test can not work in next-4284.
mysql-test/t/ps_ddl.test:
Update results (CREATE TABLE IF NOT EXISTS takes
into account existence of the temporary table).
Cherry-pick a fix Bug#37148 from next-mr, to preserve
file ids of the added files, and ensure that all the necessary
changes have been pulled.
Since initially Bug#37148 was null-merged into 6.0,
the changeset that is now being cherry-picked was likewise
null merged into next-4284.
Now that Bug#37148 has been reapplied to 6.0, try to make
it work with next-4284. This is also necessary to be able
to pull other changes from 5.1-rep into next-4284.
To resolve the merge issues use this changeset applied
to 6.0:
revid:jperkin@sun.com-20091216103628-ylhqf7s6yegui2t9
revno: 3776.1.1
committer: He Zhenxing <zhenxing.he@sun.com>
branch nick: 6.0-codebase-bugfixing
timestamp: Thu 2009-12-17 17:02:50 +0800
message:
Fix merge problem with Bug#37148
Conflicts:
- mysql-test/r/mysqld--help-win.result
- sql/sys_vars.cc
Original revsion (in next-mr-bugfixing):
------------------------------------------------------------
revno: 2971 [merge]
revision-id: alfranio.correia@sun.com-20100121210527-rbuheu5rnsmcakh1
committer: Alfranio Correia <alfranio.correia@sun.com>
branch nick: mysql-next-mr-bugfixing
timestamp: Thu 2010-01-21 21:05:27 +0000
message:
BUG#46364 MyISAM transbuffer problems (NTM problem)
It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables.
In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.
In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.
So, in this patch we introduce the option
- "--binlog-direct-non-transactional-updates" that can be used to bypass
the current behavior in order to write directly to binary log statements
that change non-transactional tables.
Besides, it is used to enable the WL#2687 which is disabled by default.
------------------------------------------------------------
revno: 2970.1.1
revision-id: alfranio.correia@sun.com-20100121131034-183r4qdyld7an5a0
parent: alik@sun.com-20100121083914-r9rz2myto3tkdya0
committer: Alfranio Correia <alfranio.correia@sun.com>
branch nick: mysql-next-mr-bugfixing
timestamp: Thu 2010-01-21 13:10:34 +0000
message:
BUG#46364 MyISAM transbuffer problems (NTM problem)
It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables.
In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.
In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.
So, in this patch we introduce the option
- "--binlog-direct-non-transactional-updates" that can be used to bypass
the current behavior in order to write directly to binary log statements
that change non-transactional tables.
Besides, it is used to enable the WL#2687 which is disabled by default.
The auto-inc unsafe warning makes sense even though it's just
one auto-inc table could be involved via a trigger or a stored
function.
However its content was not updated by bug@45677 fixes continuing to mention
two tables whereas the fixes refined semantics of replication of auto_increment
in stored routine.
Fixed with updating the error message, renaming the error and an internal unsafe-condition
constants.
A documentation notice
======================
Inserting into an autoincrement column in a stored function or a trigger
is unsafe for replication.
Even with just one autoincrement column, if the routine is invoked more than
once slave is not guaranteed to execute the statement graph same way as
the master.
And since it's impossible to estimate how many times a routine can be invoked at
the query pre-execution phase (see lock_tables), the statement is marked
pessimistically unsafe.
mysql-test/suite/binlog/r/binlog_stm_unsafe_warning.result:
results updated to include the expected unsafe warning.
mysql-test/suite/binlog/t/binlog_stm_unsafe_warning.test:
regression test for bug#50192 to diplaying the unsafe warning comes out to the user warning stack.
sql/share/errmsg-utf8.txt:
Updating the auto-inc unsafe message to correspond to bug@45677 fixes' new sematics.
sql/share/errmsg.txt:
Updating the auto-inc unsafe message to correspond to bug@45677 fixes' new sematics.
sql/sql_base.cc:
changing a symbolic name to correspond to updated by bug@45677 fixes new sematics.
sql/sql_lex.cc:
changing a symbolic name to correspond to updated by bug@45677 fixes new sematics.
sql/sql_lex.h:
changing a symbolic name to correspond to updated by bug@45677 fixes new sematics
and description comments.
Bug #45856 can't switch from binlog_format=row to mix with open tmp tbl
If binlog_format=MIXED, there are open temporary tables, an unsafe statement
is executed, and the user issues 'SET @@session.binlog_format = STATEMENT',
then subsequent DML statements will be written in row format despite
binlog_format=STATEMENT. Because the binlog format can't be reset to
statement based by 'reset_current_stmt_binlog_row_based' function.
If binlog_format=ROW, there are open temporary tables, and an unsafe statement
is executed, then the statement 'SET @@session.binlog_format = MIXED' generates
the error:
"Cannot switch out of the row-based binary log format when the session has open
temporary tables"
However, it is safe to switch to MIXED mode because events in row format are allowed.
To fix the above two problems, generate ER_TEMP_TABLE_PREVENTS_SWITCH_OUT_OF_RBR
and forbid switching from MIXED or ROW to STATEMENT when there are open temp
tables and we are logging in row format. There is no error in any other case.
mysql-test/suite/binlog/r/binlog_format_switch_in_tmp_table.result:
Test result for bug#45855 and bug#45856.
mysql-test/suite/binlog/t/binlog_format_switch_in_tmp_table.test:
Added test file to verify if the program will generate
ER_TEMP_TABLE_PREVENTS_SWITCH_OUT_OF_RBR error and forbid
switching from MIXED or ROW to STATEMENT when there are
open temp tables and we are logging in row format. There
is no error in any other case.
