not on predefined values
The default name of the PID file was constructed, as documented,
based on the hostname. This name was subsequently used as the
base for the general log file name. If the name of the PID
file was overridden in the configuration, and no explicit name
was set for the general log file, the path location for the
PID file was used also for the general log file.
A new variable, 'default_logfile_name', has been introduced. This name
is constructed based on the hostname, and is then used to
construct both the PID file and the general log file.
The general log file will now, unless explicitly set, be
located in the server data directory (as documentated in
the server docs)
Let
- T be a transactional table and N non-transactional table.
- B be begin, C commit and R rollback.
- N be a statement that accesses and changes only N-tables.
- T be a statement that accesses and changes only T-tables.
In RBR, changes to N-tables that happen early in a transaction are not immediately flushed
upon committing a statement. This behavior may, however, break consistency in the presence
of concurrency since changes done to N-tables become immediately visible to other
connections. To fix this problem, we do the following:
. B N N T C would log - B N C B N C B T C.
. B N N T R would log - B N C B N C B T R.
Note that we are not preserving history from the master as we are introducing a commit that
never happened. However, this seems to be more acceptable than the possibility of breaking
consistency in the presence of concurrency.
Let
- T be a transactional table and N non-transactional table.
- B be begin, C commit and R rollback.
- M be a mixed statement, i.e. a statement that updates both T and N.
- M* be a mixed statement that fails while updating either T or N.
This patch restore the behavior presented in 5.1.37 for rows either produced in
the RBR or MIXED modes, when a M* statement that happened early in a transaction
had their changes written to the binary log outside the boundaries of the
transaction and wrapped in a BEGIN/ROLLBACK. This was done to keep the slave
consistent with with the master as the rollback would keep the changes on N and
undo them on T. In particular, we do what follows:
. B M* T C would log - B M* R B T C.
Note that, we are not preserving history from the master as we are introducing a
rollback that never happened. However, this seems to be more acceptable than
making the slave diverge. We do not fix the following case:
. B T M* C would log B T M* C.
The slave will diverge as the changes on T tables that originated from the M
statement are rolled back on the master but not on the slave. Unfortunately, we
cannot simply rollback the transaction as this would undo any uncommitted
changes on T tables.
SBR is not considered in this patch because a failing statement is written to
the binary along with the error code and a slave executes and then rolls back
the statement when it has an associated error code, thus undoing the effects
on T. In RBR and MBR, a full-fledged fix will be pushed after the WL 2687.
Problem: LOGGER::general_log_write() relied on valid "thd" parameter passed
but had inconsistent "if (thd)" check.
Fix: as we always pass a valid "thd" parameter to the method,
redundant check removed.
with gcc 4.3.2
This patch fixes a number of GCC warnings about variables used
before initialized. A new macro UNINIT_VAR() is introduced for
use in the variable declaration, and LINT_INIT() usage will be
gradually deprecated. (A workaround is used for g++, pending a
patch for a g++ bug.)
GCC warnings for unused results (attribute warn_unused_result)
for a number of system calls (present at least in later
Ubuntus, where the usual void cast trick doesn't work) are
also fixed.
binlog
Mixing transactional (T) and non-transactional (N) tables on behalf of a
transaction may lead to inconsistencies among masters and slaves in STATEMENT
mode. The problem stems from the fact that although modifications done to
non-transactional tables on behalf of a transaction become immediately visible
to other connections they do not immediately get to the binary log and therefore
consistency is broken. Although there may be issues in mixing T and M tables in
STATEMENT mode, there are safe combinations that clients find useful.
In this bug, we fix the following issue. Mixing N and T tables in multi-level
(e.g. a statement that fires a trigger) or multi-table table statements (e.g.
update t1, t2...) were not handled correctly. In such cases, it was not possible
to distinguish when a T table was updated if the sequence of changes was N and T.
In a nutshell, just the flag "modified_non_trans_table" was not enough to reflect
that both a N and T tables were changed. To circumvent this issue, we check if an
engine is registered in the handler's list and changed something which means that
a T table was modified.
Check WL 2687 for a full-fledged patch that will make the use of either the MIXED or
ROW modes completely safe.
binlog
The fix for BUG 43929 introduced a regression issue. In a nutshell, when a
statement that changes a non-transactional table fails, it is written to the
binary log with the error code appended. Unfortunately, after BUG 43929, this
failure was flushing the transactional chace causing mismatch between execution
and logging histories. To fix this issue, we avoid flushing the transactional
cache when a commit or rollback is not issued.
The problem: described in the bug report.
The fix:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
Large transactions and statements may corrupt the binary log if the size of the
cache, which is set by the max_binlog_cache_size, is not enough to store the
the changes.
In a nutshell, to fix the bug, we save the position of the next character in the
cache before starting processing a statement. If there is a problem, we simply
restore the position thus removing any effect of the statement from the cache.
Unfortunately, to avoid corrupting the binary log, we may end up loosing changes
on non-transactional tables if they do not fit in the cache. In such cases, we
store an Incident_log_event in order to stop the slave and alert users that some
changes were not logged.
Precisely, for every non-transactional changes that do not fit into the cache,
we do the following:
a) the statement is *not* logged
b) an incident event is logged after committing/rolling back the transaction,
if any. Note that if a failure happens before writing the incident event to
the binary log, the slave will not stop and the master will not have reported
any error.
c) its respective statement gives an error
For transactional changes that do not fit into the cache, we do the following:
a) the statement is *not* logged
b) its respective statement gives an error
To work properly, this patch requires two additional things. Firstly, callers to
MYSQL_BIN_LOG::write and THD::binlog_query must handle any error returned and
take the appropriate actions such as undoing the effects of a statement. We
already changed some calls in the sql_insert.cc, sql_update.cc and sql_insert.cc
modules but the remaining calls spread all over the code should be handled in
BUG#37148. Secondly, statements must be either classified as DDL or DML because
DDLs that do not get into the cache must generate an incident event since they
cannot be rolled back.
statements missed from general log
A refinement of the test in the previous patch to avoid
using sleep as a means to ensure that timestamps are
added to the log entries.
BEGIN/COMMIT/ROLLBACK was subject to replication db rules, and
caused the boundary of a transaction not recognized correctly
when these queries were ignored by the rules.
Fixed the problem by skipping replication db rules for these
statements.
Make the caller of Query_log_event, Execute_load_log_event
constructors and THD::binlog_query to provide the error code
instead of having the constructors to figure out the error code.
Bug#44091: libmysqld gets stuck waiting on mutex on initialization
The problem was that libmysqld wasn't enforcing a certain
initialization and deinitialization order for the mysys
library. Another problem was that the global object used
for management of log event handlers (aka LOGGER) wasn't
being prepared for a possible reutilization.
What leads to the hang/crash reported is that a failure
to load the language file triggers a double call of the
cleanup functions, causing an already destroyed mutex to
be used.
The solution is enforce a order on the initialization and
deinitialization of the mysys library within the libmysqld
library and to ensure that the global LOGGER object reset
it's internal state during cleanup.
When the thread executing a DDL was killed after finished its
execution but before writing the binlog event, the error code in
the binlog event could be set wrongly to ER_SERVER_SHUTDOWN or
ER_QUERY_INTERRUPTED.
This patch fixed the problem by ignoring the kill status when
constructing the event for DDL statements.
This patch also included the following changes in order to
provide the test case.
1) modified mysqltest to support variable for connection command
2) modified mysql-test-run.pl, add new variable MYSQL_SLAVE to
run mysql client against the slave mysqld.
The problem here seem to be that when mysql
is redirecting stderr to a file, stderr becomes
buffered, whereas it is unbuffered by definition.
The solution is to unbuffer it by setting buffer
to null.
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
conflicts:
Text conflict in client/mysqltest.cc
Text conflict in mysql-test/include/wait_until_connected_again.inc
Text conflict in mysql-test/lib/mtr_report.pm
Text conflict in mysql-test/mysql-test-run.pl
Text conflict in mysql-test/r/events_bugs.result
Text conflict in mysql-test/r/log_state.result
Text conflict in mysql-test/r/myisam_data_pointer_size_func.result
Text conflict in mysql-test/r/mysqlcheck.result
Text conflict in mysql-test/r/query_cache.result
Text conflict in mysql-test/r/status.result
Text conflict in mysql-test/suite/binlog/r/binlog_index.result
Text conflict in mysql-test/suite/binlog/r/binlog_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_packet.result
Text conflict in mysql-test/suite/rpl/t/rpl_packet.test
Text conflict in mysql-test/t/disabled.def
Text conflict in mysql-test/t/events_bugs.test
Text conflict in mysql-test/t/log_state.test
Text conflict in mysql-test/t/myisam_data_pointer_size_func.test
Text conflict in mysql-test/t/mysqlcheck.test
Text conflict in mysql-test/t/query_cache.test
Text conflict in mysql-test/t/rpl_init_slave_func.test
Text conflict in mysql-test/t/status.test
BUG#39325 Server crash inside MYSQL_LOG::purge_first_log halts replicaiton
The patch reverses the order of the purging and updating events for log and
relay-log.info/index files respectively.
This solves the problem of having holes caused by crashes happening between updating
info/index files and purging logs.
This patch also contains an aditional test case for testing the crashing before purge logs.
NOTE1: This is a combined patch for BUG#38826 and BUG#39325. This patch is based on
bugteam tree and takes into account reviewers suggestions.
NOTE2: Merge from 5.0-bugteam
BUG#39325 Server crash inside MYSQL_LOG::purge_first_log halts replicaiton
The patch reverses the order of the purging and updating events for log and relay-log.info/index files respectively.
This solves the problem of having holes caused by crashes happening between updating info/index files and purging logs.
NOTE: This is a combined patch for BUG#38826 and BUG#39325. This patch is based on bugteam tree and takes into account reviewers suggestions.
after rollback on master
When starting a transaction with a statement containing changes
to both transactional tables and non-transactional tables, the
statement is considered as non-transactional and is therefore
written directly to the binary log. This behaviour was present
in 5.0, and has propagated to 5.1.
If a trigger containing a change of a non-transactional table is
added to a transactional table, any changes to the transactional
table is "tainted" as non-transactional.
This patch solves the problem by removing the existing "hack" that
allows non-transactional statements appearing first in a transaction
to be written directly to the binary log. Instead, anything inside
a transaction is treaded as part of the transaction and not written
to the binary log until the transaction is committed.
A transaction could result in having an extra event after a query that
errored e.g because of a dup key. Such a query is rolled back in
innodb, as specified, but has not been in binlog.
It appeares that the binlog engine did not always register for a query
(statement) because the previous query had not reset at its statement
commit time. Because of that fact there was no roll-back to the
trx_data->before_stmt_pos position and a the pending event of the
errorred query could become flushed to the binlog file.
Fixed with deploying the reset of trx_data->before_stmt_pos at the end
of the query processing.
Debug builds of MySQL 5.1, 6.0 with Sun Studio 12 broke because of
use of gcc specific feature.
The fix is to replace __FUNCTION__ with the corresponding character string
Debug builds of MySQL 5.1, 6.0 with Sun Studio 12 broke because of
use of gcc specific feature.
The fix is to replace __FUNCTION__ with the corresponding character
string
The failure was caused by executing a CREATE-SELECT statement that creates a
table in another database than the current one. In row-based logging, the
CREATE statement was written to the binary log without the database, hence
creating the table in the wrong database, causing the following inserts to
fail since the table didn't exist in the given database.
Fixed the bug by adding a parameter to store_create_info() that will make
the function print the database name before the table name and used that
in the calls that write the CREATE statement to the binary log. The database
name is only printed if it is different than the currently selected database.
The output of SHOW CREATE TABLE has not changed and is still printed without
the database name.
"Trigger fired multiple times leads to gaps in auto_increment sequence".
The bug was that if a trigger fired multiple times inside a top
statement (for example top-statement is a multi-row INSERT,
and trigger is ON INSERT), and that trigger inserted into an auto_increment
column, then gaps could be observed in the auto_increment sequence,
even if there were no other users of the database (no concurrency).
It was wrong usage of THD::auto_inc_intervals_in_cur_stmt_for_binlog.
Note that the fix changes "class handler", I'll tell the Storage Engine API team.
Rotate event is automatically generated and written when rotating binary
log or relay log. Rotate events for relay logs are usually ignored by slave
SQL thread becuase they have the same server id as that of the slave.
However, if --replicate-same-server-id is enabled, rotate event
for relay log would be treated as if it's a rotate event from master, and
would be executed by slave to update the rli->group_master_log_name and
rli->group_master_log_pos to a wrong value and cause the MASTER_POS_WAIT
function to fail and return NULL.
This patch fixed this problem by setting a flag bit (LOG_EVENT_RELAY_LOG_F)
in the event to tell the SQL thread to ignore these Rotate events generated
for relay logs.
This patch also added another binlog event flag bit (LOG_EVENT_ARTIFICIAL_F)
to distinquish faked events, the method used before this was by checking if
log_pos was zero.
The assertion indicates that some data was left in the transaction
cache when the server was shut down, which means that a previous
statement did not commit or rollback correctly.
What happened was that a bug in the rollback of a transactional
table caused the transaction cache to be emptied, but not reset.
The error can be triggered by having a failing UPDATE or INSERT,
on a transactional table, causing an implicit rollback.
Fixed by always flushing the pending event to reset the state
properly.
The failure was caused by executing a CREATE-SELECT statement that creates a
table in another database than the current one. In row-based logging, the
CREATE statement was written to the binary log without the database, hence
creating the table in the wrong database, causing the following inserts to
fail since the table didn't exist in the given database.
Fixed the bug by adding a parameter to store_create_info() that will make
the function print the database name before the table name and used that
in the calls that write the CREATE statement to the binary log. The database
name is only printed if it is different than the currently selected database.
The output of SHOW CREATE TABLE has not changed and is still printed without
the database name.
