Drop and add same key is considered rename (look ALTER_RENAME_INDEX in
fill_alter_inplace_info()). But in this case order of keys may be
changed, because mysql_prepare_alter_table() yet does not know about
rename and treats 2 operations: drop and add.
In that case we disable inplace algorithm for such engines as Memory,
MyISAM and Aria with ALTER_INDEX_ORDER flag. These engines have no
specialized check_if_supported_inplace_alter() and default
handler::check_if_supported_inplace_alter() sees an unknown flag and
returns HA_ALTER_INPLACE_NOT_SUPPORTED.
ha_innobase::check_if_supported_inplace_alter() works differently and
inplace is not disabled (with the help of modified
INNOBASE_INPLACE_IGNORE). add_drop_v_cols fork was also tweaked as it
wrongly failed with MSG_UNSUPPORTED_ALTER_ONLINE_ON_VIRTUAL_COLUMN
when it seen ALTER_INDEX_ORDER.
No-op operation must be still no-op no matter of ALTER_INDEX_ORDER
presence, so we tweek its condition as well.
bzip2/lz4/lzma/lzo/snappy compression is now provided via *services*
they're almost like normal services, but in include/providers/
and they're supposed to provide exactly the same interface
as original compression libraries (but not everything,
only enough of if for the code to compile).
the services are implemented via dummy functions that return
corresponding error values (LZMA_PROG_ERROR, LZO_E_INTERNAL_ERROR, etc).
the actual compression libraries are linked into corresponding
provider plugins. Providers are daemon plugins that when loaded
replace service pointers to point to actual compression functions.
That is, run-time dependency on compression libraries is now on plugins,
and the server doesn't need any compression libraries to run, but
will automatically support the compression when a plugin is loaded.
InnoDB and Mroonga use compression plugins now. RocksDB doesn't,
because it comes with standalone utility binaries that cannot
load plugins.
if plugin->deinit() returns a failure, it is no longer ignored, it
means that the plugin isn't ready to be unloaded from memory yet.
So it's marked "dying", deinitialized as much as possible,
but stays in memory until shutdown.
also:
* increment MARIA_PLUGIN_INTERFACE_VERSION
* rewrite ha_rocksdb to use the new approach, update the test
https://jira.mariadb.org/browse/MDEV-26221
my_sys DYNAMIC_ARRAY and DYNAMIC_STRING inconsistancy
The DYNAMIC_STRING uses size_t for sizes, but DYNAMIC_ARRAY used uint.
This patch adjusts DYNAMIC_ARRAY to use size_t like DYNAMIC_STRING.
As the MY_DIR member number_of_files is copied from a DYNAMIC_ARRAY,
this is changed to be size_t.
As MY_TMPDIR members 'cur' and 'max' are copied from a DYNAMIC_ARRAY,
these are also changed to be size_t.
The lists of plugins and stored procedures use DYNAMIC_ARRAY,
but their APIs assume a size of 'uint'; these are unchanged.
This was required as I added a new error code to my_base.h and rocksdb
is adding it's own errors after the last official one
Updated result file also for index_merge_rocksdb2. This is a big test
and we have probably not before noticed that some optimizer changes
caused a difference.
in about a hundred of users of MY_BITMAP, only two were using its
built-in mutex, and only one of those two was actually needing it.
Remove the mutex from MY_BITMAP, remove all associated conditions
and checks in bitmap functions. Use an external LOCK_temp_pool
mutex and temp_pool_set_next/temp_pool_clear_bit acccessors.
Remove bitmap_init/bitmap_free, always use my_* versions.
Thanks to Theodore Brockman on Zulip for noticing
on an OSX ARM64 and testing this patch.
Per https://github.com/google/cpu_features/pull/150/files
CMAKE_SYSTEM_PROCESSOR is arm64 on Apple.
Without this, compulation error:
[ 80%] Building CXX object storage/rocksdb/CMakeFiles/rocksdblib.dir/rocksdb/util/crc32c.cc.o
/mariadb/storage/rocksdb/rocksdb/util/crc32c.cc:500:18: error: use of undeclared identifier 'isSSE42'
has_fast_crc = isSSE42();
^
/mariadb/storage/rocksdb/rocksdb/util/crc32c.cc:1230:7: error: use of undeclared identifier 'isSSE42'
if (isSSE42()) {
^
/mariadb/storage/rocksdb/rocksdb/util/crc32c.cc:1231:9: error: use of undeclared identifier 'isPCLMULQDQ'
if (isPCLMULQDQ()) {
^
This can be reverted when the RocksDB submodule is updated.
ee4bd4780b
This gives a short overview over found/missing dependencies as well
as enabled/disabled features.
Initial author Heinz Wiesinger <heinz@m2mobi.com>
Additions by Vicențiu Ciorbaru <vicentiu@mariadb.org>
* Report all plugins enabled via MYSQL_ADD_PLUGIN
* Simplify code. Eliminate duplication by making use of WITH_xxx
variable values to set feature "ON" / "OFF" state.
Reviewed by: wlad@mariadb.com (code details) serg@mariadb.com (the idea)
This is a complete rewrite of DROP TABLE, also as part of other DDL,
such as ALTER TABLE, CREATE TABLE...SELECT, TRUNCATE TABLE.
The background DROP TABLE queue hack is removed.
If a transaction needs to drop and create a table by the same name
(like TRUNCATE TABLE does), it must first rename the table to an
internal #sql-ib name. No committed version of the data dictionary
will include any #sql-ib tables, because whenever a transaction
renames a table to a #sql-ib name, it will also drop that table.
Either the rename will be rolled back, or the drop will be committed.
Data files will be unlinked after the transaction has been committed
and a FILE_RENAME record has been durably written. The file will
actually be deleted when the detached file handle returned by
fil_delete_tablespace() will be closed, after the latches have been
released. It is possible that a purge of the delete of the SYS_INDEXES
record for the clustered index will execute fil_delete_tablespace()
concurrently with the DDL transaction. In that case, the thread that
arrives later will wait for the other thread to finish.
HTON_TRUNCATE_REQUIRES_EXCLUSIVE_USE: A new handler flag.
ha_innobase::truncate() now requires that all other references to
the table be released in advance. This was implemented by Monty.
ha_innobase::delete_table(): If CREATE TABLE..SELECT is detected,
we will "hijack" the current transaction, drop the table in
the current transaction and commit the current transaction.
This essentially fixes MDEV-21602. There is a FIXME comment about
making the check less failure-prone.
ha_innobase::truncate(), ha_innobase::delete_table():
Implement a fast path for temporary tables. We will no longer allow
temporary tables to use the adaptive hash index.
dict_table_t::mdl_name: The original table name for the purpose of
acquiring MDL in purge, to prevent a race condition between a
DDL transaction that is dropping a table, and purge processing
undo log records of DML that had executed before the DDL operation.
For #sql-backup- tables during ALTER TABLE...ALGORITHM=COPY, the
dict_table_t::mdl_name will differ from dict_table_t::name.
dict_table_t::parse_name(): Use mdl_name instead of name.
dict_table_rename_in_cache(): Update mdl_name.
For the internal FTS_ tables of FULLTEXT INDEX, purge would
acquire MDL on the FTS_ table name, but not on the main table,
and therefore it would be able to run concurrently with a
DDL transaction that is dropping the table. Previously, the
DROP TABLE queue hack prevented a race between purge and DDL.
For now, we introduce purge_sys.stop_FTS() to prevent purge from
opening any table, while a DDL transaction that may drop FTS_
tables is in progress. The function fts_lock_table(), which will
be invoked before the dictionary is locked, will wait for
purge to release any table handles.
trx_t::drop_table_statistics(): Drop statistics for the table.
This replaces dict_stats_drop_index(). We will drop or rename
persistent statistics atomically as part of DDL transactions.
On lock conflict for dropping statistics, we will fail instantly
with DB_LOCK_WAIT_TIMEOUT, because we will be holding the
exclusive data dictionary latch.
trx_t::commit_cleanup(): Separated from trx_t::commit_in_memory().
Relax an assertion around fts_commit() and allow DB_LOCK_WAIT_TIMEOUT
in addition to DB_DUPLICATE_KEY. The call to fts_commit() is
entirely misplaced here and may obviously break the consistency
of transactions that affect FULLTEXT INDEX. It needs to be fixed
separately.
dict_table_t::n_foreign_key_checks_running: Remove (MDEV-21175).
The counter was a work-around for missing meta-data locking (MDL)
on the SQL layer, and not really needed in MariaDB.
ER_TABLE_IN_FK_CHECK: Replaced with ER_UNUSED_28.
HA_ERR_TABLE_IN_FK_CHECK: Remove.
row_ins_check_foreign_constraints(): Do not acquire
dict_sys.latch either. The SQL-layer MDL will protect us.
This was reviewed by Thirunarayanan Balathandayuthapani
and tested by Matthias Leich.
This fixed the MySQL bug# 20338 about misuse of double underscore
prefix __WIN__, which was old MySQL's idea of identifying Windows
Replace it by _WIN32 standard symbol for targeting Windows OS
(both 32 and 64 bit)
Not that connect storage engine is not fixed in this patch (must be
fixed in "upstream" branch)
MDEV-25604 Atomic DDL: Binlog event written upon recovery does not
have default database
The purpose of this task is to ensure that ALTER TABLE is atomic even if
the MariaDB server would be killed at any point of the alter table.
This means that either the ALTER TABLE succeeds (including that triggers,
the status tables and the binary log are updated) or things should be
reverted to their original state.
If the server crashes before the new version is fully up to date and
commited, it will revert to the original table and remove all
temporary files and tables.
If the new version is commited, crash recovery will use the new version,
and update triggers, the status tables and the binary log.
The one execption is ALTER TABLE .. RENAME .. where no changes are done
to table definition. This one will work as RENAME and roll back unless
the whole statement completed, including updating the binary log (if
enabled).
Other changes:
- Added handlerton->check_version() function to allow the ddl recovery
code to check, in case of inplace alter table, if the table in the
storage engine is of the new or old version.
- Added handler->table_version() so that an engine can report the current
version of the table. This should be changed each time the table
definition changes.
- Added ha_signal_ddl_recovery_done() and
handlerton::signal_ddl_recovery_done() to inform all handlers when
ddl recovery has been done. (Needed by InnoDB).
- Added handlerton call inplace_alter_table_committed, to signal engine
that ddl_log has been closed for the alter table query.
- Added new handerton flag
HTON_REQUIRES_NOTIFY_TABLEDEF_CHANGED_AFTER_COMMIT to signal when we
should call hton->notify_tabledef_changed() during
mysql_inplace_alter_table. This was required as MyRocks and InnoDB
needed the call at different times.
- Added function server_uuid_value() to be able to generate a temporary
xid when ddl recovery writes the query to the binary log. This is
needed to be able to handle crashes during ddl log recovery.
- Moved freeing of the frm definition to end of mysql_alter_table() to
remove duplicate code and have a common exit strategy.
-------
InnoDB part of atomic ALTER TABLE
(Implemented by Marko Mäkelä)
innodb_check_version(): Compare the saved dict_table_t::def_trx_id
to determine whether an ALTER TABLE operation was committed.
We must correctly recover dict_table_t::def_trx_id for this to work.
Before purge removes any trace of DB_TRX_ID from system tables, it
will make an effort to load the user table into the cache, so that
the dict_table_t::def_trx_id can be recovered.
ha_innobase::table_version(): return garbage, or the trx_id that would
be used for committing an ALTER TABLE operation.
In InnoDB, table names starting with #sql-ib will remain special:
they will be dropped on startup. This may be revisited later in
MDEV-18518 when we implement proper undo logging and rollback
for creating or dropping multiple tables in a transaction.
Table names starting with #sql will retain some special meaning:
dict_table_t::parse_name() will not consider such names for
MDL acquisition, and dict_table_rename_in_cache() will treat such
names specially when handling FOREIGN KEY constraints.
Simplify InnoDB DROP INDEX.
Prevent purge wakeup
To ensure that dict_table_t::def_trx_id will be recovered correctly
in case the server is killed before ddl_log_complete(), we will block
the purge of any history in SYS_TABLES, SYS_INDEXES, SYS_COLUMNS
between ha_innobase::commit_inplace_alter_table(commit=true)
(purge_sys.stop_SYS()) and purge_sys.resume_SYS().
The completion callback purge_sys.resume_SYS() must be between
ddl_log_complete() and MDL release.
--------
MyRocks support for atomic ALTER TABLE
(Implemented by Sergui Petrunia)
Implement these SE API functions:
- ha_rocksdb::table_version()
- hton->check_version = rocksdb_check_versionMyRocks data dictionary
now stores table version for each table.
(Absence of table version record is interpreted as table_version=0,
that is, which means no upgrade changes are needed)
- For inplace alter table of a partitioned table, call the underlying
handlerton when checking if the table is ok. This assumes that the
partition engine commits all changes at once.
This change removed 68 explict strlen() calls from the code.
The following renames was done to ensure we don't use the old names
when merging code from earlier releases, as using the new variables
for print function could result in crashes:
- charset->csname renamed to charset->cs_name
- charset->name renamed to charset->coll_name
Almost everything where mechanical changes except:
- Changed to use the new Protocol::store(LEX_CSTRING..) when possible
- Changed to use field->store(LEX_CSTRING*, CHARSET_INFO*) when possible
- Changed to use String->append(LEX_CSTRING&) when possible
Other things:
- There where compiler issues with ensuring that all character set names
points to the same string: gcc doesn't allow one to use integer constants
when defining global structures (constant char * pointers works fine).
To get around this, I declared defines for each character set name
length.
Changes:
- To detect automatic strlen() I removed the methods in String that
uses 'const char *' without a length:
- String::append(const char*)
- Binary_string(const char *str)
- String(const char *str, CHARSET_INFO *cs)
- append_for_single_quote(const char *)
All usage of append(const char*) is changed to either use
String::append(char), String::append(const char*, size_t length) or
String::append(LEX_CSTRING)
- Added STRING_WITH_LEN() around constant string arguments to
String::append()
- Added overflow argument to escape_string_for_mysql() and
escape_quotes_for_mysql() instead of returning (size_t) -1 on overflow.
This was needed as most usage of the above functions never tested the
result for -1 and would have given wrong results or crashes in case
of overflows.
- Added Item_func_or_sum::func_name_cstring(), which returns LEX_CSTRING.
Changed all Item_func::func_name()'s to func_name_cstring()'s.
The old Item_func_or_sum::func_name() is now an inline function that
returns func_name_cstring().str.
- Changed Item::mode_name() and Item::func_name_ext() to return
LEX_CSTRING.
- Changed for some functions the name argument from const char * to
to const LEX_CSTRING &:
- Item::Item_func_fix_attributes()
- Item::check_type_...()
- Type_std_attributes::agg_item_collations()
- Type_std_attributes::agg_item_set_converter()
- Type_std_attributes::agg_arg_charsets...()
- Type_handler_hybrid_field_type::aggregate_for_result()
- Type_handler_geometry::check_type_geom_or_binary()
- Type_handler::Item_func_or_sum_illegal_param()
- Predicant_to_list_comparator::add_value_skip_null()
- Predicant_to_list_comparator::add_value()
- cmp_item_row::prepare_comparators()
- cmp_item_row::aggregate_row_elements_for_comparison()
- Cursor_ref::print_func()
- Removes String_space() as it was only used in one cases and that
could be simplified to not use String_space(), thanks to the fixed
my_vsnprintf().
- Added some const LEX_CSTRING's for common strings:
- NULL_clex_str, DATA_clex_str, INDEX_clex_str.
- Changed primary_key_name to a LEX_CSTRING
- Renamed String::set_quick() to String::set_buffer_if_not_allocated() to
clarify what the function really does.
- Rename of protocol function:
bool store(const char *from, CHARSET_INFO *cs) to
bool store_string_or_null(const char *from, CHARSET_INFO *cs).
This was done to both clarify the difference between this 'store' function
and also to make it easier to find unoptimal usage of store() calls.
- Added Protocol::store(const LEX_CSTRING*, CHARSET_INFO*)
- Changed some 'const char*' arrays to instead be of type LEX_CSTRING.
- class Item_func_units now used LEX_CSTRING for name.
Other things:
- Fixed a bug in mysql.cc:construct_prompt() where a wrong escape character
in the prompt would cause some part of the prompt to be duplicated.
- Fixed a lot of instances where the length of the argument to
append is known or easily obtain but was not used.
- Removed some not needed 'virtual' definition for functions that was
inherited from the parent. I added override to these.
- Fixed Ordered_key::print() to preallocate needed buffer. Old code could
case memory overruns.
- Simplified some loops when adding char * to a String with delimiters.
- Remove 'dummy_for_valgrind' overrun marker as this doesn't help much.
The element also distorts the sizes of objects a bit, which makes it
harder to calculate gain in object sizes when doing size optimizations.
- Replace usage of thd_get_current_thd() with _current_thd()
- Avoid one extra call indirection when using thd_get_current_thd(), which
is used by Sql_alloc, by replacing it with _current_thd()
This patch changes the main name of 3 byte character set from utf8 to
utf8mb3. New old_mode UTF8_IS_UTF8MB3 is added and set TRUE by default,
so that utf8 would mean utf8mb3. If not set, utf8 would mean utf8mb4.
The counter metadata_table_reference_count was not updated consistently
ever since mysql-server@65c0af9a1dedae43b63797134aff6b32304ced52
or commit 2e814d4702
introduced dict_table_t::release().
The counter metadata_table_handles_closed was being incremented
unconditionally in ha_innobase::close(), while the corresponding
counter metadata_table_handles_opened would be incremented in
ha_innobase::open() if the function returned early due to an error.
MONITOR_TRX_ACTIVE: Remove. The count is not being updated consistently,
and it would also include read-only transactions that are otherwise
fully invisible to any other threads.
If it later turns out that a reliable count of active transactions
is needed, it can be exposed via a different interface.
trx_commit_for_mysql(): If the transaction was not started, return
immediately.