Virtual columns of ENUM and SET data types were not supported properly
in the original patch that introduced virtual columns into MariaDB 5.2.
The problem was that for any virtual column the patch used the
interval_id field of the definition of the column in the frm file as
a reference to the virtual column expression.
The fix stores the optional interval_id of the virtual column in the
extended header of the virtual column expression.
This bug was introduced into mariadb 5.2 in the December 2010 with
the patch that added a new engine property: the ability to support
virtual columns.
As a result of this bug the information from frm files for tables
that contained virtual columns did not appear in the information schema
tables.
timestamp: Thu 2011-12-01 15:12:10 +0100
Fix for Bug#13430436 PERFORMANCE DEGRADATION IN SYSBENCH ON INNODB DUE TO ICP
When running sysbench on InnoDB there is a performance degradation due
to index condition pushdown (ICP). Several of the queries in sysbench
have a WHERE condition that the optimizer uses for executing these
queries as range scans. The upper and lower limit of the range scan
will ensure that the WHERE condition is fulfilled. Still, the WHERE
condition is part of the queries' condition and if ICP is enabled the
condition will be pushed down to InnoDB as an index condition.
Due to the range scan's upper and lower limits ensure that the WHERE
condition is fulfilled, the pushed index condition will not filter out
any records. As a result the use of ICP for these queries results in a
performance overhead for sysbench. This overhead comes from using
resources for determining the part of the condition that can be pushed
down to InnoDB and overhead in InnoDB for executing the pushed index
condition.
With the default configuration for sysbench the range scans will use
the primary key. This is a clustered index in InnoDB. Using ICP on a
clustered index provides the lowest performance benefit since the
entire record is part of the clustered index and in InnoDB it has the
highest relative overhead for executing the pushed index condition.
The fix for removing the overhead ICP introduces when running sysbench
is to disable use of ICP when the index used by the query is a
clustered index.
When WL#6061 is implemented this change should be re-evaluated.
If the expression for a derived table of a query contained a LIMIT
clause the estimate of the number of rows in this derived table
returned by the EXPLAIN command could be badly off since the
optimizer ignored the limit number from the LIMIT clause when
getting the estimate.
The call of the method SELECT_LEX_UNIT->set_limit added in the code
of mysql_derived_optimize() will be needed also in maria-5.5 where
parameters in the LIMIT clause are supported.
A table expression with a natural join or a USING clause is transformed
into an equivalent expression with equi-join ON conditions. If a reference
to a virtual column happened to occur only in these generated equi-join
conditions then it was not erroneously marked in the TABLE::vcol_set bitmap.
This could lead to wrong results for queries containing natural join
expressions or USING clauses.
* rename all debugging related command-line options
and variables to start from "debug-", and made them all
OFF by default.
* replace "MySQL" with "MariaDB" in error messages
* "Cast ... converted ... integer to it's ... complement"
is now a note, not a warning
* @@query_cache_strip_comments now has a session scope,
not global.
sql/sql_insert.cc:
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
******
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
sql/sql_table.cc:
small cleanup
******
small cleanup
of the 5.3 code line after a merge with 5.2 on 2010-10-28
in order not to allow the cost to access a joined table to be equal
to 0 ever.
Expanded data sets for many test cases to get the same execution plans
as before.
semijoin=on,firstmatch=on,loosescan=on
to
semijoin=off,firstmatch=off,loosescan=off
Adjust the testcases:
- Modify subselect*.test and join_cache.test so that all tests
use the same execution paths as before (i.e. optimizations that
are being tested are enabled)
- Let all other test files run with the new default settings (i.e.
with new optimizations disabled)
- Copy subquery testcases from these files into t/subselect_extra.test
which will run them with new optimizations enabled.
Strict mode now gives error if one tries to update a virtual column.
mysql-test/suite/vcol/r/vcol_column_def_options_innodb.result:
Updated test results
mysql-test/suite/vcol/r/vcol_column_def_options_myisam.result:
Updated test results
mysql-test/suite/vcol/r/vcol_keys_innodb.result:
Updated test results
mysql-test/suite/vcol/r/vcol_keys_myisam.result:
Updated test results
mysql-test/suite/vcol/r/vcol_misc.result:
Added new test for 'show columns' and error handling when trying to update a virtual column.
mysql-test/suite/vcol/t/vcol_misc.test:
Added new test for 'show columns' and error handling when trying to update a virtual column.
sql/sql_base.cc:
Strict mode now gives error if one tries to update a virtual column.
sql/sql_show.cc:
Show PERSISTENT instead of VIRTUAL for persistent columns.
A lot of small fixes and new test cases.
client/mysqlbinlog.cc:
Cast removed
client/mysqltest.cc:
Added missing DBUG_RETURN
include/my_pthread.h:
set_timespec_time_nsec() now only takes one argument
mysql-test/t/date_formats.test:
Remove --disable_ps_protocl as now also ps supports microseconds
mysys/my_uuid.c:
Changed to use my_interval_timer() instead of my_getsystime()
mysys/waiting_threads.c:
Changed to use my_hrtime()
sql/field.h:
Added bool special_const_compare() for fields that may convert values before compare (like year)
sql/field_conv.cc:
Added test to get optimal copying of identical temporal values.
sql/item.cc:
Return that item_int is equal if it's positive, even if unsigned flag is different.
Fixed Item_cache_str::save_in_field() to have identical null check as other similar functions
Added proper NULL check to Item_cache_int::save_in_field()
sql/item_cmpfunc.cc:
Don't call convert_constant_item() if there is nothing that is worth converting.
Simplified test when years should be converted
sql/item_sum.cc:
Mark cache values in Item_sum_hybrid as not constants to ensure they are not replaced by other cache values in compare_datetime()
sql/item_timefunc.cc:
Changed sec_to_time() to take a my_decimal argument to ensure we don't loose any sub seconds.
Added Item_temporal_func::get_time() (This simplifies some things)
sql/mysql_priv.h:
Added Lazy_string_decimal()
sql/mysqld.cc:
Added my_decimal constants max_seconds_for_time_type, time_second_part_factor
sql/table.cc:
Changed expr_arena to be of type CONVENTIONAL_EXECUTION to ensure that we don't loose any items that are created by fix_fields()
sql/tztime.cc:
TIME_to_gmt_sec() now sets *in_dst_time_gap in case of errors
This is needed to be able to detect if timestamp is 0
storage/maria/lockman.c:
Changed from my_getsystime() to set_timespec_time_nsec()
storage/maria/ma_loghandler.c:
Changed from my_getsystime() to my_hrtime()
storage/maria/ma_recovery.c:
Changed from my_getsystime() to mmicrosecond_interval_timer()
storage/maria/unittest/trnman-t.c:
Changed from my_getsystime() to mmicrosecond_interval_timer()
storage/xtradb/handler/ha_innodb.cc:
Added support for new time,datetime and timestamp
unittest/mysys/thr_template.c:
my_getsystime() -> my_interval_timer()
unittest/mysys/waiting_threads-t.c:
my_getsystime() -> my_interval_timer()
extra/comp_err.c:
Allow one to have multiple start-error-numbers in the same error.txt file.
Generate 'empty' error strings for the missing error numbers in the errmsg.sys file
mysql-test/r/bigint.result:
Update results to use new error numbers
mysql-test/r/dyncol.result:
Update results to use new error numbers
mysql-test/r/func_math.result:
Update results to use new error numbers
mysql-test/r/func_str.result:
Update results to use new error numbers
mysql-test/r/plugin.result:
Update results to use new error numbers
mysql-test/r/table_options.result:
Update results to use new error numbers
mysql-test/r/type_newdecimal.result:
Update results to use new error numbers
mysql-test/r/warnings.result:
Update results to use new error numbers
mysql-test/suite/vcol/r/vcol_ins_upd_innodb.result:
Update results to use new error numbers
mysql-test/suite/vcol/r/vcol_ins_upd_myisam.result:
Update results to use new error numbers
mysql-test/suite/vcol/r/vcol_misc.result:
Update results to use new error numbers
sql/derror.cc:
Ensure we don't read a errmsg.sys with a missing required error message; This change was needed as errmsg.sys may now contain empty error messages between the MySQL and MariaDB error messages.
If error message file didn't exist and we have not read one in the past, don't continue.
Give better error message if the errmsg.sys header has changed.
sql/share/errmsg.txt:
Create new section, starting from 1900, for MariaDB error messages
Resolved all conflicts, bad merges and fixed a few minor bugs in the code.
Commented out the queries from multi_update, view, subselect_sj, func_str,
derived_view, view_grant that failed either with crashes in ps-protocol or
with wrong results.
The failures are clear indications of some bugs in the code and these bugs
are to be fixed.
- COLUMN_CREATE(column_nr, value, [column_nr,value]...)
- COLUMN_ADD(blob,column_nr, value, column_nr,value]...)
- COLUMN_DELETE(blob, column_nr, column_nr...)
- COLUMN_EXISTS(blob, column_nr)
- COLUMN_LIST(blob, column_nr)
- COLUMN_GET(string, column_nr AS type)
Added cast(X as DOUBLE) and cast(x as INT)
Better warning and error messages for wrong cast's
Created some sub functions to simplify and reuse code.
Added a lot of conversation functions with error/warnings for what went wrong.
Fixed some issues when casting time to datetime.
Added functions to dynamic strings and Strings to allow one to move a string buffer from dynamic strings to String (to save malloc+ copy)
Added dynamic columns library to libmysqlclient
include/Makefile.am:
Added ma_dyncol.h
include/decimal.h:
Added 'const' to arguments for some functions.
include/my_sys.h:
Added dynstr_reassociate()
include/my_time.h:
Added TIME_SUBSECOND_RANGE
Added double_to_datetime()
Added flag argument to str_to_time()
libmysql/CMakeLists.txt:
Added mysys/ma_dyncol.c
libmysql/Makefile.shared:
Added ma_dyncol
libmysql/libmysql.c:
Added argument to str_to_time()
mysql-test/r/bigint.result:
Better error messages
mysql-test/r/cast.result:
Better warning and error messages
A lot of new cast() tests
mysql-test/r/func_math.result:
Better warning messages
mysql-test/r/func_str.result:
Better warning messages
mysql-test/r/func_time.result:
Better warning messages
mysql-test/r/sp-vars.result:
Better warning messages
mysql-test/r/strict.result:
Better warning messages
New test result
mysql-test/r/type_newdecimal.result:
Better warning messages
mysql-test/r/warnings.result:
Better warning messages
mysql-test/suite/funcs_1/r/innodb_func_view.result:
Updated results after better cast warnings
mysql-test/suite/funcs_1/r/memory_func_view.result:
Updated results after better cast warnings
mysql-test/suite/funcs_1/r/myisam_func_view.result:
Updated results after better cast warnings
mysql-test/suite/optimizer_unfixed_bugs/t/bug43448.test:
Added begin...commit to speed up test.
mysql-test/suite/parts/inc/part_supported_sql_funcs_delete.inc:
Added begin...commit to speed up test.
mysql-test/suite/parts/inc/partition_supported_sql_funcs.inc:
Added begin...commit to speed up test.
mysql-test/suite/parts/r/part_supported_sql_func_innodb.result:
Added begin...commit to speed up test.
mysql-test/suite/parts/r/part_supported_sql_func_myisam.result:
Added begin...commit to speed up test.
mysql-test/suite/parts/r/rpl_partition.result:
Added begin...commit to speed up test.
mysql-test/suite/parts/t/part_supported_sql_func_innodb.test:
Removed duplicated --big_test
mysql-test/suite/parts/t/rpl_partition.test:
Added begin...commit to speed up test.
mysql-test/suite/pbxt/r/cast.result:
Updated results after better cast warnings
mysql-test/suite/pbxt/r/func_str.result:
Updated results after better cast warnings
mysql-test/suite/pbxt/r/type_newdecimal.result:
Updated results after better cast warnings
mysql-test/suite/rpl/r/rpl_innodb_bug28430.result:
Added begin...commit to speed up test.
mysql-test/suite/rpl/t/rpl_innodb_bug28430.test:
Added begin...commit to speed up test.
mysql-test/suite/vcol/r/vcol_supported_sql_funcs_innodb.result:
More warnings
mysql-test/suite/vcol/r/vcol_supported_sql_funcs_myisam.result:
More warnings
mysql-test/t/cast.test:
A lot of new cast() tests
mysql-test/t/strict.test:
Added new test
mysys/CMakeLists.txt:
Added ma_dyncol.c
mysys/Makefile.am:
Added ma_dyncol.c
mysys/string.c:
Added dynstr_reassociate() to move a buffer from dynamic_strings to some other allocator
sql-common/my_time.c:
Added 'fuzzydate' flag to str_to_time()
Added support for microseconds to my_time_to_str() and my_datetime_to_str()
Reset second_parts in number_to_datetime()
Added double_to_datetime()
sql/field.cc:
Added double_to_longlong() and truncate_double() to simplify and reuse code
sql/field.h:
New prototypes
sql/item.cc:
Changed Item::get_date(MYSQL_TIME *ltime,uint fuzzydate) to be aware of type of argument.
(Needed to make it microsecond safe and get better warnings).
Updated call to str_to_time_with_warn()
sql/item.h:
Added struct st_dyncall_create_def used by dynamic columns
Added virtual bool dynamic_result() to tell if type of argument may change over calls.
sql/item_cmpfunc.cc:
Added Item_func_dyncol_exists()
sql/item_cmpfunc.h:
Added class Item_func_dyncol_exists
sql/item_create.cc:
Added get_length_and_scale() to simplify other functions
Simplified and extended create_func_cast()
Added support for cast(X as double(X,Y))
Added functions to create dynamic column functions.
sql/item_create.h:
Added prototypes
sql/item_func.cc:
Extended cast functions Item_func_signed() and Item_func_unsigned() to work with dynamic types
Added Item_double_typecast()
sql/item_func.h:
Added class Item_double_typecast()
sql/item_strfunc.cc:
Added functions for COLUMN_CREATE(), COLUMN_ADD(), COLUMN_GET() and COLUMN_LIST()
sql/item_strfunc.h:
Added classes for COLUMN_CREATE(), COLUMN_ADD(), COLUMN_GET() and COLUMN_LIST()
sql/item_timefunc.cc:
Added flag argument to str_to_time_with_warn()
Updated Item_char_typecast() to handle result type that may change between calls (for dynamic columns)
Added Item_time_typecast::get_date() to ensure that we cast a datetime to time properly.
sql/item_timefunc.h:
Added get_date() to Item_time_typecast() to allow proper results for casting time to datetime
sql/lex.h:
Added new SQL function names
sql/my_decimal.cc:
Added 'const' to some arguments.
Better error message in case of errors (we now print out the wrong value)
Added my_decimal2int()
sql/my_decimal.h:
Moved some constants to my_decimal_limits.h
Updated prototypes.
Made my_decimal2int() a function as it's rather long (no reason to have it inline)
Added decimal2my_decimal() function.
sql/mysql_priv.h:
Prototypes for new functions
sql/share/errmsg.txt:
New error messages for wrong casts and dynamic columns
sql/sql_acl.cc:
Fixed indentation
sql/sql_base.cc:
Added dynamic_column_error_message()
sql/sql_string.h:
Added reassociate() to move a buffer to be owned by String object.
sql/sql_yacc.yy:
Added syntax for COLUMN_ functions.
sql/time.cc:
Updated str_to_datetime_with_warn() flag argument to same type as other functions
Added conversion flag to str_to_time_with_warn() (Similar to all datetime functions)
Added conversion functions with warnings: double_to_datetime_with_warn() and decimal_to_datetime_with_warn()
strings/decimal.c:
Added 'const' to arguments for some functions.
unittest/mysys/Makefile.am:
Added test for dynamic columns code
