Merge up to sunny.bains@oracle.com-20100625081841-ppulnkjk1qlazh82 .
There are 8 more changesets in mysql-5.1-innodb, but PB2 shows a
failure for a test added in one of them. If that is resolved quickly
then those 8 more changesets will be merged too.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENTbut, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, session's user will be written into query log events
if these statements call CURREN_USER() or 'ALTER EVENT' does not assign a definer.
Apart strict-aliasing warnings, fix the remaining warnings
generated by GCC 4.4.4 -Wall and -Wextra flags.
One major source of warnings was the in-house function my_bcmp
which (unconventionally) took pointers to unsigned characters
as the byte sequences to be compared. Since my_bcmp and bcmp
are deprecated functions whose only difference with memcmp is
the return value, every use of the function is replaced with
memcmp as the special return value wasn't actually being used
by any caller.
There were also various other warnings, mostly due to type
mismatches, missing return values, missing prototypes, dead
code (unreachable) and ignored return values.
MERGE engine".
Backport the patch from 6.0 by Ingo Struewing:
revid:ingo.struewing@sun.com-20091028183659-6kmv1k3gdq6cpg4d
Bug#36171 - CREATE TEMPORARY TABLE and MERGE engine
In former MySQL versions, up to 5.1.23/6.0.4 it was possible to create
temporary MERGE tables with non-temporary MyISAM tables.
This has been changed in the mentioned version due to Bug 19627
(temporary merge table locking). MERGE children were locked through
the parent table. If the parent was temporary, it was not locked and
so the children were not locked either. Parallel use of the MyISAM
tables corrupted them.
Since 6.0.6 (WL 4144 - Lock MERGE engine children), the children are
locked independently from the parent. Now it is possible to allow
non-temporary children with a temporary parent. Even though the
temporary MERGE table itself is not locked, each non-temporary
MyISAM table is locked anyway.
NOTE: Behavior change: In 5.1.23/6.0.4 we prohibited non-temporary
children with a temporary MERGE table. Now we re-allow it.
An important side-effect is that temporary tables, which overlay
non-temporary MERGE children, overlay the children in the MERGE table.
and a backport of relevant changes from the 6.0
version of the fix done by Ingo Struewing.
The bug itself was fixed by the patch for Bug#54811.
MyISAMMRG engine would try to use MMAP on its children
even on platforms that don't support it and even if
myisam_use_mmap option was off.
This lead to an infinite hang in INSERT ... SELECT into
a MyISAMMRG table when the destination MyISAM table
was also selected from.
A bug in duplicate detection fixed by 54811 was essential to
the hang - when a duplicate is detected, the optimizer
disables the use of memory mapped files, and it wasn't the case.
The patch below is also to not turn on MMAP on children tables
if myisam_use_mmap is off.
A test case is added to cover MyISAMMRG and myisam_use_mmap
option.
with open HANDLER
Fixes a problem with schema.test visible using embedded server.
The HANDLER was not closed which caused the test to hang.
The problem was not visible if the test was run on a normal server
as the the handler there was implicitly closed by DATABASE DDL
statements doing Events::drop_schema_events().
with open HANDLER
Fixes problem which caused mdl_sync.test to fail on Solaris and
Windows due to path name differences in error messages in the
result file.
DATABASE with open HANDLER"
Remove LOCK_create_db, database name locks, and use metadata locks instead.
This exposes CREATE/DROP/ALTER DATABASE statements to the graph-based
deadlock detector in MDL, and paves the way for a safe, deadlock-free
implementation of RENAME DATABASE.
Database DDL statements will now take exclusive metadata locks on
the database name, while table/view/routine DDL statements take
intention exclusive locks on the database name. This prevents race
conditions between database DDL and table/view/routine DDL.
(e.g. DROP DATABASE with concurrent CREATE/ALTER/DROP TABLE)
By adding database name locks, this patch implements
WL#4450 "DDL locking: CREATE/DROP DATABASE must use database locks" and
WL#4985 "DDL locking: namespace/hierarchical locks".
The patch also changes code to use init_one_table() where appropriate.
The new lock_table_names() function requires TABLE_LIST::db_length to
be set correctly, and this is taken care of by init_one_table().
This patch also adds a simple template to help work with
the mysys HASH data structure.
Most of the patch was written by Konstantin Osipov.
Fixed an incomplete historical ALTER TABLE MODIFY trimming the trigger
privilege bit from mysql.tables_priv.Table_priv column.
Removed the duplicate ALTER TABLE MODIFY.
Test suite added.
BUG#54872 MBR: replication failure caused by using tmp table inside transaction
Changed criteria to classify a statement as unsafe in order to reduce the
number of spurious warnings. So a statement is classified as unsafe when
there is on-going transaction at any point of the execution if:
1. The mixed statement is about to update a transactional table and
a non-transactional table.
2. The mixed statement is about to update a temporary transactional
table and a non-transactional table.
3. The mixed statement is about to update a transactional table and
read from a non-transactional table.
4. The mixed statement is about to update a temporary transactional
table and read from a non-transactional table.
5. The mixed statement is about to update a non-transactional table
and read from a transactional table when the isolation level is
lower than repeatable read.
After updating a transactional table if:
6. The mixed statement is about to update a non-transactional table
and read from a temporary transactional table.
7. The mixed statement is about to update a non-transactional table
and read from a temporary transactional table.
8. The mixed statement is about to update a non-transactionala table
and read from a temporary non-transactional table.
9. The mixed statement is about to update a temporary non-transactional
table and update a non-transactional table.
10. The mixed statement is about to update a temporary non-transactional
table and read from a non-transactional table.
11. A statement is about to update a non-transactional table and the
option variables.binlog_direct_non_trans_update is OFF.
The reason for this is that locks acquired may not protected a concurrent
transaction of interfering in the current execution and by consequence in
the result. So the patch reduced the number of spurious unsafe warnings.
Besides we fixed a regression caused by BUG#51894, which makes temporary
tables to go into the trx-cache if there is an on-going transaction. In
MIXED mode, the patch for BUG#51894 ignores that the trx-cache may have
updates to temporary non-transactional tables that must be written to the
binary log while rolling back the transaction.
So we fix this problem by writing the content of the trx-cache to the
binary log while rolling back a transaction if a non-transactional
temporary table was updated and the binary logging format is MIXED.
The problem is that QUICK_SELECT_DESC behaviour depends
on used_key_parts value which can be bigger than selected
best_key_parts value if an engine supports clustered key.
But used_key_parts is overwritten with best_key_parts
value that prevents from correct selection of index
access method. The fix is to preserve used_key_parts
value for further use in QUICK_SELECT_DESC.
Remove mysql_lock_have_duplicate(), since now we always
have TABLE_LIST objects for MyISAMMRG children
in lex->query_tables and keep it till the end of the
statement (sub-statement).
Merge and adjust a forgotten change to fix this bug.
rb://393 approved by Jimmy Yang
------------------------------------------------------------------------
r3794 | marko | 2009-01-07 14:14:53 +0000 (Wed, 07 Jan 2009) | 18 lines
branches/6.0: Allow the minimum length of a multi-byte character to be
up to 4 bytes. (Bug #35391)
dtype_t, dict_col_t: Replace mbminlen:2, mbmaxlen:3 with mbminmaxlen:5.
In this way, the 5 bits can hold two values of 0..4, and the storage size
of the fields will not cross the 64-bit boundary. Encode the values as
DATA_MBMAX * mbmaxlen + mbminlen. Define the auxiliary macros
DB_MBMINLEN(mbminmaxlen), DB_MBMAXLEN(mbminmaxlen), and
DB_MINMAXLEN(mbminlen, mbmaxlen).
Try to trim and pad UTF-16 and UTF-32 with spaces as appropriate.
Alexander Barkov suggested the use of cs->cset->fill(cs, buff, len, 0x20).
ha_innobase::store_key_val_for_row() now does that, but the added function
row_mysql_pad_col() does not, because it doesn't have the MySQL TABLE object.
rb://49 approved by Heikki Tuuri
------------------------------------------------------------------------
switching binlog format to ROW
BUG 52616 fixed the case which the user would switch from STMT to
ROW binlog format, but the server would silently ignore it. After
that fix thd->is_current_stmt_binlog_format_row() reports correct
value at logging time and events are logged in ROW (as expected)
instead of STMT as they were previously and wrongly logged.
However, the fix was only partially complete, because on
disconnect, at THD cleanup, the implicit logging of temporary
tables is conditionally performed. If the binlog_format==ROW and
thd->is_current_stmt_binlog_format_row() is true then DROPs are
not logged. Given that the user can switch from STMT to ROW, this
is wrong because the server cannot tell, just by relying on the
ROW binlog format, that the tables have been dropped before. This
is effectively similar to the MIXED scenario when a switch from
STMT to ROW is triggered.
We fix this by removing this condition from
close_temporary_tables.
This bug is a consequence of WL#5349, as the
default storage engine was changed.
The fix was to explicitly add an ENGINE
clause to a CREATE TABLE statement, to
ensure that we test case preservement on
MyISAM.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENTbut, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, session's user will be written into query log events
if these statements call CURREN_USER() or 'ALTER EVENT' does not assign a definer.
The problem was that if a query accessing a view was blocked due to
conflicting locks on tables in the view definition, it would be possible
for a different connection to alter the view definition before the view
query completed. When the view query later resumed, it used the old view
definition. This meant that if the view query was later repeated inside
the same transaction, the two executions of the query would give different
results, thus breaking repeatable read. (The first query used the old
view definition, the second used the new view definition).
This bug is no longer repeatable with the recent changes to the metadata
locking subsystem (revno: 3040). The view query will no longer back-off
and release the lock on the view definiton. Instead it will wait for
the conflicting lock(s) to go away while keeping the view definition lock.
This means that it is no longer possible for a concurrent connection to
alter the view definition. Instead, any such attempt will be blocked.
In the case from the bug report where the same view query was executed
twice inside the same transaction, any ALTER VIEW from other connections
will now be blocked until the transaction has completed (or aborted).
The view queries will therefore use the same view definition and we will
have repeatable read.
Test case added to innodb_mysql_lock.test.
This patch contains no code changes.
This deadlock happened if DROP DATABASE was blocked due to an open
HANDLER table from a different connection. While DROP DATABASE
is blocked, it holds the LOCK_mysql_create_db mutex. This results
in a deadlock if the connection with the open HANDLER table tries
to execute a CREATE/ALTER/DROP DATABASE statement as they all
try to acquire LOCK_mysql_create_db.
This patch makes this deadlock scenario very unlikely by closing and
marking for re-open all HANDLER tables for which there are pending
conflicing locks, before LOCK_mysql_create_db is acquired.
However, there is still a very slight possibility that a connection
could access one of these HANDLER tables between closing/marking for
re-open and the acquisition of LOCK_mysql_create_db.
This patch is for 5.1 only, a separate and complete fix will be
made for 5.5+.
Test case added to schema.test.
Bug#47633 - assert in ha_myisammrg::info during OPTIMIZE
The server crashed on an attempt to optimize a MERGE table with
non-existent child table.
mysql_admin_table() relied on the table to be successfully open
if a table object had been allocated.
Changed code to check return value of the open function before
calling a handler:: function on it.
returns nothing
When looking for table or database names inside INFORMATION_SCHEMA
we must convert the table and database names to lowercase (just as it's
done in the rest of the server) when lowercase_table_names is non-zero.
This will allow us to find the same tables that we would find if there
is no condition.
Fixed by converting to lower case when extracting the database and
table name conditions.
Test case added.