PLATFORM= MACOSX10.6 X86_64 MAX
Problem: The test was failing on pb2's mac machine because
it was not cleaned up properly. The test checks if
the command 'start slave until' throws a proper
error when issued with a wrong number/type of
parameters. After this,the replication stream was
stopped using the include file 'rpl_end.inc'.
The errors thrown earlier left the slave in an
inconsistent state to be closed by the include
file which was caught by the mac machine.
Fix: Started slave by invoking start_slave.inc to have a
working slave before calling rpl_reset.inc
Problem: The test file was not in a good shape. It tested
start slave until relay log file/pos combination
wrongly. A couple of commands were executed at
master and replicated at slave. Next, the
coordinates in terms of relay log file and pos
were noted down followed by reset slave and start
slave until saved relay log file/pos. Reset slave
deletes all relay log files and makes the slave
forget its replication position. So, using the
saved coordiantes after reset slave is wrong.
Fix: Split the test in two parts:
a) Test for start slave until master log file/pos and
checking for correct errors in the failure
scenarios.
b) Test for start slave until relay log file/pos.
Problem: The variables auto_increment_increment and
auto_increment_offset were set in the the include
file rpl_init.inc. This was only configured for
some connections that are rarely used by test
cases, so likely that it will cause confusion.
If replication tests want to setup these variables
they should do so explicitly.
Fix:
a) Removed code to set the variables
auto_increment_increment and auto_increment_offset
in the include file.
b) Updated tests files using the same.
post push fix:
rpl_stm_until.test was disabled because of
this bug. Enabled and fixed it.
Removed a part of the test that was obsolete.
It tested replication from 4.0 master to 5.0
slave.
patch to fix post push falures in pb2
BUG#15872504 - REMOVE MYSQL-TEST/INCLUDE/GET_BINLOG_DUMP_THREAD_ID.INC
=== Problem ===
The file named "mysql-test/include/get_binlog_dump_thread_id.inc" is not
used anywhere. In any case, this file does wrong things in the wrong way:
1) The file seems to assume there is only one dump thread, but there may
be many.
2) you can get this information in a much easier way using the command:
"select thread_id from threads where processlist_command="Binlog Dump";"
=== Fix ===
removed file 'mysql-test/include/get_binlog_dump_thread_id.inc'
DISABLE AND ENABLED DURING DDL OPERATION
PROBLEM: Same thread trying to acquire the same mutex
second time leads to hang/server crash.
While [un]installing audit_log plugin
a thread acquires the LOCK_plugin mutex
and after successful initialization tries
to write in mysql.plugin table. It holds
this mutex for a long time. If some how
plugin table is corrupted then a write to
plugin table will throw an error, thread try
to log this error in the audit_log plugin,
doing so it tries to acquire the mutex
again and results is server hang/crash.
SOLUTION: Releasing the LOCK_plugin mutex before
writing in mysql.plugin table. We dont
need to hold this mutex as thread already
acquired a TL_WRITE lock on mysql.plugin
table.
main.mysqlbinlog_row_innodb are skipped by mtr
=== Problem ===
The following tests are wrongly placed in main suite and as a
result these are not run with proper binlog format combinations.
Some are always skipped by mtr.
1) mysqlbinlog_row_myisam
2) mysqlbinlog_row_innodb
3) mysqlbinlog_row.test
4) mysqlbinlog_row_trans.test
5) mysqlbinlog-cp932
6) mysqlbinlog2
7) mysqlbinlog_base64
=== Background ===
mtr runs the tests placed in main suite with binlog format=stmt.
Those that need to be tested against binlog format=row or mixed
or more than one binlog format and require only one mysql server
are placed in binlog suite. mtr runs tests in binlog suite with
all three binlog formats(stmt,row and mixed).
=== Fix ===
1) Moved the test listed in problem section above to binlog suite.
2) Added prefix "binlog_" to the name of each test case moved.
Renamed the coresponding result files and option files accordingly.
mysql-test/extra/binlog_tests/mysqlbinlog_row_engine.inc:
include file for mysqlbinlog_row_myisam.test and
mysqlbinlog_row_myisam.test which are being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog-cp932.result:
result file for mysqlbinlog-cp932.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog2.result:
result file for mysqlbinlog2.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_base64.result:
result file for mysqlbinlog_base64.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_row.result:
result file for mysqlbinlog_row.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_row_innodb.result:
result file for mysqlbinlog_row_innodb.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_row_myisam.result:
result file for mysqlbinlog_row_myisam.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_row_trans.result:
result file for mysqlbinlog_row_trans.test which is being moved to
binlog suite.
mysql-test/suite/binlog/t/binlog_mysqlbinlog-cp932-master.opt:
option file for mysqlbinlog-cp932.test which is being moved to
binlog suite.
mysql-test/suite/binlog/t/binlog_mysqlbinlog-cp932.test:
the test requires binlog format=stmt or mixed. Since, it was placed in
main suite earlier, it was only run with binlog format=stmt, and hence
this test was never run with binlog format=mixed.
mysql-test/suite/binlog/t/binlog_mysqlbinlog2.test:
the test requires binlog format=stmt or mixed. Since, it was placed in
main suite earlier, it was only run with binlog format=stmt, and hence
this test was never run with binlog format=mixed.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_base64.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_row.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_row_innodb.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_row_myisam.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_row_trans.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
This is a followup patch for the bug enabling the test
i_binlog.binlog_mysqlbinlog_file_write.test
this was disabled in mysql trunk and mysql 5.5 as in the release
build mysqlbinlog was not debug compiled whereas the mysqld was.
Since have_debug.inc script checks only for mysqld to be debug
compiled, the test was not being skipped on release builds.
We resolve this problem by creating a new inc file
mysqlbinlog_have_debug.inc which checks exclusively for mysqlbinlog
to be debug compiled. if not it skips the test.
mysql-test/include/mysqlbinlog_have_debug.inc:
new inc file to check if mysqlbinlog is debug compiled.
Problem - The default port number shown in SHOW SLAVE HOSTS is always 3306
though the slave is actually listening on a different port number.
This is a problem as the user can not be sure whether this port
value can be trusted and so client trying to read replication
topology can get confused.
Fix - 3306 ceases to be the default value of report-port. Moreover report-port
does not have a static default any longer.
Instead we initialize report-port to 0 as the new default value and change
it based on two checks :
1) If report_port is not set, the slave reports the port number its listening
on. (i.e. if report-port is not set we get the actual value of the slave's
port number).
2) If report-port is set, we show the value report-port is set to, as the slave's
port number.
mysql-test/include/show_slave_hosts.inc:
A .inc file is added to use show slave hosts in the new test added.
mysql-test/r/mysqld--help-notwin.result:
Updated the result file to show the default value passed for report-port.
mysql-test/suite/rpl/r/rpl_report_port.result:
The result file for the new test that is added.
mysql-test/suite/rpl/r/rpl_show_slave_hosts.result:
Updated the result file to show the default value passed for report-port.
mysql-test/suite/rpl/t/rpl_report_port-slave.opt:
Option file for the new test added.
mysql-test/suite/rpl/t/rpl_report_port.test:
Added a test to check the correct functionality of report-port.
We check this by running the replication twice.
In the first run we do not set the value of report-port through the opt file
and get the actual port number of the slave's port.
We then restart the server with report-port set to some value (in this case 9000)
and check the value reported for the slave's port number.
mysql-test/suite/sys_vars/t/report_port_basic.test:
Update the test file to show the value for report-port. It is replaced with
SLAVE_PORT as the actual value of the report-port will change with each run.
sql/mysqld.cc:
Changed the value reported by report port :
1. If the value for report-port is not set we assign report-port to be the
actual port number of the slave (mysqld_port).
2. If report-port is set we get the value set for the report-port.
sql/sys_vars.cc:
Passed 0 as the default value of the report-port.
RESULT FROM PREVIOUS TRANSACTION
The current Query Cache API is not fully compatible with
the partitioning engine.
There is no good way to implement support for QC due to:
1) a static callback for ha_partition would need to have access
to all partition names and call the underlying callback for each
[sub]partition with the correct name.
2) pruning would be impossible, even if one used the ulonglong
engine_data due to if engine_data is changed, the table is
invalidated by the QC.
So the only viable solution to avoid incorrect data is to not allow
caching of queries using partitioned tables.
(There are some extra changes, due to removal of \r as line break)
This patch changes the mechanism by which the client enables a
plugin. Instead of using INSERT IGNORE to reload a plugin library,
it now uses REPLACE INTO. This allows users to load a library
multiple times replacing the existing values in the mysql.plugin
table. This allows users to replace the symbol reference to a
different dl name in the table. Thus permitting enabling of
multiple versions of the same library without first disabling
the old version.
A regression test was added to ensure this feature works.
The wait_for_ndb_to_binlog.inc include file used by the blow rpl_tests
common for rpl and rpl_ndb suite is simply doing a "sleep 5", this is
not deterministic and wastes lot of test time uneccessarily. The test
should be rewritten to check if the condition it wait for has been
reached or not.
For NDB engine all events will be added by NDB injector so tests only
can continue after injector is ready, this test waits for proper
injector thread state.
- Fixed the checks to properly check for plugin_dir containing a trailing slash or backslash.
- Fixed a under-configuration in udf_skip_grants that was preventing the test
from running even when there was a udf plugin.
If an error message contains '\' backslash it is displayed correctly
through show-slave-status or
query_get_value(SHOW SLAVE STATUS, Last_IO_Error, 1);. But when
SELECT REPLACE(...) is applied backslash is escaped resulting in a
different test output.
Disabled backslash escape on show_slave_status.inc and replaced '\' for
'/' using replace_regex function in order to achieve the same test
output when different path separators are used.
This patch changes the mechanism by which the client enables a
plugin. Instead of using INSERT IGNORE to reload a plugin library,
it now uses REPLACE INTO. This allows users to load a library
multiple times replacing the existing values in the mysql.plugin
table. This allows users to replace the symbol reference to a
different dl name in the table. Thus permitting enabling of
multiple versions of the same library without first disabling
the old version.
A regression test was added to ensure this feature works.
Refactored the test case: hardened and extended it. Created test inc file
to abstract the task of relocating binlogs.
Also, disabled it on windows for not cluttering the test case any further,
as it depends heavily on doing filesystem operations and path handling.
mysql-test/include/relocate_binlogs.inc:
Auxiliar include file that performs the relocation of binary logs
listed in an index file.
BIN LOG HAS BEEN MOVED
When moving the binary/relay log files from one location to
another and restarting the server with a different log-bin or
relay-log paths, would cause the startup process to abort. The
root cause was that the server would not be able to find the log
files because it would consider old paths for entries in the
index file instead of the new location. What's even worse, the
relative paths would not be considered relative to the path
provided in log-bin and relay-log, but to mysql_data_dir.
We fix the cases where the server contains relative paths. When
the server is reading from the index file, it checks whether the
entry contains relative paths. If it does, we replace it with the
absolute path set in log-bin/relay-log option. Absolute paths
remain unchanged and the index must be manually edited to
consider the new log-bin and/or relay-log path (this should be
documented). This is a fix for a GA version, that does not break
behavior (that much).
For development versions, we should go with Zhenxing's approach
that removes paths altogether from index files.
mysql-test/include/begin_include_file.inc:
Added parameter to keep the begin_include_file.inc silent. Useful when
including scripts that contain platform dependent parameters, for example:
--let $rpl_server_parameters=--log-bin=$tmpdir/slave-bin --relay-log=$tmpdir/slave-relay-bin
--let $keep_include_silent=1
source include/rpl_start_server.inc;
--let $keep_include_silent=0
We want the paths ($tmpdir/slave-bin and $tmpdir/slave-relay-bin) not to be in the
result file.
mysql-test/suite/rpl/t/rpl_binlog_index.test:
Test case.
sql/log.cc:
When finding the corresponding log entry in the index file, we first
normalize the paths before doing the comparison. This will make relative
paths to be turned into absolute paths (based on the opt_bin_logname or
opt_relay_logname) and then compared against also, expanded paths entered,
through CHANGE MASTER for instance.
sql/log.h:
Added normalize_binlog_name, which turns relative paths, into absolute paths
given the parameter: is_relay_log ? opt_relay_logname : opt_bin_logname .
sql/mysqld.cc:
Exposing opt_bin_logname.
sql/mysqld.h:
Exposing opt_bin_logname.
This is a redo for 5.5
Added 'innodb_file_format_max' as variable to ignore change to.
Tests that had to restore this amended
Two tests assumed it to be Antelope, make sure these run on a freshly
started server
Fix for commit_1innodb failure on pb2.
Background: as status increment differs for an unsafe statement
when logged in stmt and row format, mtr throws a content mismatch
error.
Fix: call p_verify_status_increment with different arguments
for loging format as stmt and row/mixed and disable query log.
Problem: commit_1innodb fails on pb2 after the patch for BUG#11758262
Background: Certain statements threw warnings only in statement mode causing
the result cintent mismatch.
Fix: disabled warnings from the statements.
Added 'innodb_file_format_check' as variable to ignore change to.
Tests that had to restore this amended
Two tests assumed it to be Antelope, make sure these run on a freshly
started server
For 5.5, apparently innodb_file_format_max is the one to ignore
Undo previous fix, it is not reliable
Drop setting $MYSQL_LIBDIR, mtr can't be sure anyway
Test is set to override plugin-dir to some known existing dir
Patch fixes an issue with reading basedir on Windows. It fixes how
the code interprets opt_basedir on Windows by adding the correct
path separators and quotes for paths with spaces.
BUG#12664302 : mysql_plugin cannot recognize the plugin config file
Patch fixes an issue with reading a plugin config file. It adds
more information to the error messages to ensure the user is
using the options correctly. Also deals with paths with spacs on
Windows.
This patch adds a new client utility that enables or disables plugin
features. The utility disables or enables a plugin using values (name,
soname, and symbols) provided via a configuration file by the same name.
For example, to ENABLE the daemon_example plugin, the utility will read
the daemon_example.ini configuration file and use the values contained to
enable or disable the plugin.
IN WAIT_SHOW_CONDITION)
There was a typo in the name of one of the parameters to the
include file wait_show_condition. The parameter name was being
set to "connection" instead of "condition".
We fix this typo, improve one instruction in the test case and
deploy parameter checks inside wait_show_condition.inc.
Add extra codes to wait_until_disconnected.inc that are present in 5.5,
but not in 5.1. The missing codes cause innodb_bug59641 to fail in 5.1 on
Windows PB2 runs. The addition of those codes in 5.5 was done in
luis.soares@sun.com-20090930233215-aup3kxy4j6ltvjfp
