lock_rec_has_to_wait_in_queue(): Remove an obviously redundant assertion
that was added in commit a8ec45863b
and also enclose a Galera-specific condition in #ifdef WITH_WSREP.
lock_rec_has_to_wait
wsrep_kill_victim
lock_rec_create_low
lock_rec_add_to_queue
DeadlockChecker::select_victim()
THD can't change from normal transaction to BF (brute force) transaction
here, thus there is no need to syncronize access in wsrep_thd_is_BF
function.
lock_rec_has_to_wait_in_queue
Add condition that lock is not NULL and add assertions if we are in
strong state.
/home/buildbot/buildbot/build/storage/xtradb/mtr/mtr0mtr.cc:97:37: error: invalid access to non-static data member ‘fil_space_t::latch’ of NULL object [-Werror=invalid-offsetof]
The purpose of the InnoDB doublewrite buffer is to make InnoDB
tolerant against cases where the server was killed in the middle
of a page write. (In Linux, killing a process may interrupt a
write system call, typically on a 4096-byte boundary.)
There may exist multiple copies of a page number in the doublewrite
buffer. Recovery should choose the latest valid copy of the page.
By design, the FIL_PAGE_LSN must not precede the latest checkpoint LSN
nor be later than the end of the recovered log.
For page_compressed and encrypted pages, we were missing proper
consistency checks. In the 10.4 data set generated for in MDEV-23231,
the data file contained a valid page_compressed page, and an
identical copy of that page was also present in the doublewrite
buffer. But, recovery would incorrectly consider the page invalid
and restore an uncompressed copy of the same page that had been
written before the log checkpoint. (In fact, no redo log was to
be applied to that page.)
buf_dblwr_process(): Validate the FIL_PAGE_LSN in the doublewrite
buffer pages, and always skip page 0, because those pages should
have been recovered by Datafile::restore_from_doublewrite() if
necessary.
Datafile::restore_from_doublewrite(): Choose the latest applicable
page from the doublewrite buffer.
recv_dblwr_t::find_page(): Also validate encrypted or
page_compressed pages.
recv_dblwr_t::validate_page(): New function to validate a page,
either a copy in a data file or in the doublewrite buffer.
Also validate encrypted or page_compressed pages.
This is joint work with Thirunarayanan Balathandayuthapani.
row_vers_impl_x_locked_low(): clust_offsets may point to memory
that is allocated by mem_heap_alloc() and may have been freed.
For initializing clust_offsets, try to use the stack-allocated
buffer instead of a pointer that may point to freed memory.
This fixes a regression that was introduced in
commit f0aa073f2b (MDEV-20950).
Problem:
========
In row_merge_drop_indexes(), InnoDB drops only the index from
dictionary and frees the index pages but it maintains the index
object if the table is being used by other DML threads. It sets
the online status of the index to ONLINE_INDEX_ABORTED_DROPPED.
Removing the index from dictionary doesn't remove the
corressponding ahi entries of the index. When block is being
reused, InnoDB tries to remove ahi entries for the block and
it fails if index online status is ONLINE_INDEX_ABORTED_DROPPED.
Fix:
====
MDEV-22456 allows the index ahi entries to be dropped lazily.
so checking online status in btr_search_drop_page_hash_index()
is meaningless and should be removed.
The only change between Percona XtraDB Server 5.6.48-88.0
and 5.6.49-89.0 (apart from the version number change) was
percona/percona-server@25ec240920
which we had already addressed in
commit 7c03edf2fe and
commit c0fca2863b.
mysql/mysql-server@e00ad49edc
which introduced WL#6326 to MySQL 5.7.2 added a buffer page
acquisition to CHECK TABLE code (solely for the purpose of
obeying the changed latching order), but failed to check that
a parent page actually exists. It would not necessarily exist in a
corrupted index where a parent page is missing pointer records
to child pages.
RocksDB fails to build on arm64: undefined reference to
`crc32c_arm64(unsigned int, unsigned char const*, unsigned int)'
MariaDB uses storage/rocksdb/build_rocksdb.cmake to compile RocksDB.
Said cmake missed adding crc32c_arm64 compilation target so if
machine native architecture supported crc32 then complier would enable
usage of function defined in crc32c_arm64 causing the listed error.
Added crc32c_arm64 complition target.
closes#1642
FreeBSD doesn't have bash installed by default and sh
has sufficient job control for this test.
$ mysql-test/mtr --mem --max-test-fail=30 --force --parallel=1 rocksdb.concurrent_alter
Logging: /home/dan/mariadb-server-10.5/mysql-test/mysql-test-run.pl --mem --max-test-fail=30 --force --parallel=1 rocksdb.concurrent_alter
vardir: /usr/home/dan/build-mariadb-server-10.5/mysql-test/var
Checking leftover processes...
Removing old var directory...
Creating var directory '/usr/home/dan/build-mariadb-server-10.5/mysql-test/var'...
- symlinking 'var' to '/tmp/var_auto_P81m'
Checking supported features...
MariaDB Version 10.5.4-MariaDB
- SSL connections supported
- binaries built with wsrep patch
Collecting tests...
Installing system database...
==============================================================================
TEST RESULT TIME (ms) or COMMENT
--------------------------------------------------------------------------
worker[1] Using MTR_BUILD_THREAD 300, with reserved ports 16000..16019
rocksdb.concurrent_alter 'write_committed' [ pass ] 16348
rocksdb.concurrent_alter 'write_prepared' [ pass ] 16771
--------------------------------------------------------------------------
The servers were restarted 1 times
Spent 33.119 of 41 seconds executing testcases
Completed: All 2 tests were successful.
$ uname -a
FreeBSD freebsd 12.1-RELEASE-p6 FreeBSD 12.1-RELEASE-p6 GENERIC amd64
commit ad6171b91c (MDEV-22456)
introduced code to buf_page_create() that would lazily drop
adaptive hash index entries for an index that has been
evicted from the data dictionary cache.
Unfortunately, that call was missing adequate protection.
While the btr_search_drop_page_hash_index(block) was executing,
the block could be reused for something else.
buf_page_create(): If btr_search_drop_page_hash_index() must be
invoked, pin the block before releasing the buf_pool->page_hash lock,
so that the block cannot be grabbed by other threads.
Problem:
=======
In buf_cur_optimistic_latch_leaves(), requesting a left block with BTR_GET
after releasing current block. But there is no guarantee that left block
could be still available.
Fix:
====
(1) In btr_cur_optimistic_latch_leaves(), replace the BUF_GET with
BUF_GET_POSSIBLY_FREED for fetching left block.
(2) Once InnoDB acquires left block, it should check FIL_PAGE_NEXT with
current block page number. If not, release cursor->left_block and return
false.
THD proc info was assigned from stack allocated temporary buffer
which went out of scope immediately after assignment.
Fixed by removing the use of temp buffer and assign proc info
from string literal.
Problem:
========
dict_load_table_one() doesn't handle the scenario where clustered
index page is FIL_NULL when DICT_ERR_IGNORE_INDEX_ROOT mode
is set.
Fix:
====
InnoDB should set the file_unreadable when it can't find the
clustered index root page.
Problem:
=======
fts_cache_append_deleted_doc_ids() holds the deleted_lock and tries to
access size of deleted_doc_ids. In the meantime, fts_cache_clear()
clears the sync_heap before clearing deleted_doc_ids. It leads to
invalid access of deleted_doc_ids.
Fix:
===
fts_cache_clear() should free the sync_heap after clearing
deleted_doc_ids.
- Due to commit fe95cb2e40 (MDEV-16125),
InnoDB master thread does not need to call srv_resume_thread()
and therefore there is no need to wake up the thread.
Due to the above patch, InnoDB should remove the following dead code.
srv_check_activity(): Makes the parameter as in,out and returns the
recent activity value
innobase_active_small(): Removed
srv_active_wake_master_thread(): Removed
srv_wake_master_thread(): Removed
srv_active_wake_master_thread_low(): Removed
Simplify srv_master_thread() and remove switch cases, added the assert.
Replace srv_wake_master_thread() with srv_inc_activity_count()
INNOBASE_WAKE_INTERVAL: Removed
The srv_monitor_event and the srv_monitor_thread would not be
created when InnoDB is in read-only mode. Yet, some code would
unconditionally invoke os_event_set(srv_monitor_event).
__pthread_cond_timedwait() in page cleaner hangs if os time moved
backwards.Workaround could be waking up the page cleaner thread in
logs_empty_and_mark_files_at_shutdown(). But there is possibility that
server could hang when server is running. So InnoDB should wake up page
cleaner thread periodically in srv_master_do_idle_tasks().
There can be multiple MLOG_CHECKPOINT record for the same checkpoint.
During recovery, InnoDB could encounter the previous MLOG_CHECKPOINT
for the checkpoint lsn. So the assertion
mlog_checkpoint_lsn <= recovered_lsn is wrong.
The issue occurs when the subquery_cache is enabled.
When there is a cache miss the division was leading to a value with scale 9.
In the case of cache hit the value returned was of scale 9 and due to the different
values for the scales the where condition evaluated to FALSE, hence the output
was incomplete.
To fix this problem we need to round up the decimal to the limit mentioned in
Item::decimals. This would make sure the values are compared with the same
scale.
When InnoDB is extending a data file, it is updating the FSP_SIZE
field in the first page of the data file.
In commit 8451e09073 (MDEV-11556)
we removed a work-around for this bug and made recovery stricter,
by making it track changes to FSP_SIZE via redo log records, and
extend the data files before any changes are being applied to them.
It turns out that the function fsp_fill_free_list() is not crash-safe
with respect to this when it is initializing the change buffer bitmap
page (page 1, or generally, N*innodb_page_size+1). It uses a separate
mini-transaction that is committed (and will be written to the redo
log file) before the mini-transaction that actually extended the data
file. Hence, recovery can observe a reference to a page that is
beyond the current end of the data file.
fsp_fill_free_list(): Initialize the change buffer bitmap page in
the same mini-transaction.
The rest of the changes are fixing a bug that the use of the separate
mini-transaction was attempting to work around. Namely, we must ensure
that no other thread will access the change buffer bitmap page before
our mini-transaction has been committed and all page latches have been
released.
That is, for read-ahead as well as neighbour flushing, we must avoid
accessing pages that might not yet be durably part of the tablespace.
fil_space_t::committed_size: The size of the tablespace
as persisted by mtr_commit().
fil_space_t::max_page_number_for_io(): Limit the highest page
number for I/O batches to committed_size.
MTR_MEMO_SPACE_X_LOCK: Replaces MTR_MEMO_X_LOCK for fil_space_t::latch.
mtr_x_space_lock(): Replaces mtr_x_lock() for fil_space_t::latch.
mtr_memo_slot_release_func(): When releasing MTR_MEMO_SPACE_X_LOCK,
copy space->size to space->committed_size. In this way, read-ahead
or flushing will never be invoked on pages that do not yet exist
according to FSP_SIZE.
In commit 0f90728bc0 (MDEV-16809)
we introduced the configuration option innodb_log_optimize_ddl
for controlling whether native index creation or table-rebuild
in InnoDB should avoid writing full redo log.
Fungo Wang reported that this option is causing occasional failures.
The reason is that pages may be written to data files in an
inconsistent state. Applying log records to such inconsistent pages
may fail.
The solution is to always invoke PageBulk::finish() before page latches
may be released, to ensure that the page contents is in a consistent
state.
Something similar was implemented in MySQL 8.0.13:
mysql/mysql-server@d1254b9473
buf_block_t::skip_flush_check: Remove. Suppressing consistency checks
is a bad idea.
PageBulk::needs_finish(): New predicate: Determine whether
PageBulk::finish() must fix up the page.
PageBulk::init(): Clear PAGE_DIRECTION to ensure that needs_finish()
will hold. We change the field from PAGE_NO_DIRECTION to 0
and back without writing redo log. This trick avoids the need
to introduce any new data member to PageBulk.
PageBulk::insert(): Replace some high-level accessors to bypass
debug assertions related to PAGE_HEAP_TOP that we will be violating
until finish() has been executed.
PageBulk::finish(): Tolerate m_rec_no==0. We must invoke this also
on an empty page, to ensure that PAGE_HEAP_TOP is initialized.
PageBulk::commit(): Always invoke finish().
PageBulk::release(), BtrBulk::pageSplit(), BtrBulk::storeExt(),
BtrBulk::finish(): Invoke PageBulk::finish().
The only InnoDB changes between Percona XtraDB Server 5.6.47-87.0
and 5.6.48-88.0 are related to InnoDB changes between MySQL 5.6.47
and MySQL 5.6.48, which we had already applied.
This issue was originally reported by Fungo Wang, along with a fix, as
MySQL Bug #98990.
His suggested fix was applied as part of
mysql/mysql-server@a003fc373d
and released in MySQL 5.7.31.
i_s_metrics_fill(): Add the missing call to Field::set_notnull(),
and simplify some code.
Problem:
=======
- Read operations are always allowed to hold a secondary index leaf
latch and then look up the corresponding clustered index record.
Flush table operation acquires secondary index latch while holding
a clustered index latch. It leads to deadlock violation.
Fix:
====
- Flush table operation should acquire secondary index before taking
clustered index to avoid deadlock violation with select operation.