Recent gcc/clang versions failed to compile the existing code.
Updating a later upstream SDK version was simple and required
only implementing a flush method. This was left blank as
there was no strong requirement to keep the error log
atomic or durable.
Reviewed-by: wlad@mariadb.com
The upstream SDK version added a flush method which was simple
to complete.
To fix this, it is necessary to add an option to exclude the
database with the name "lost+found" from processing (the database
name will be checked by the check_if_skip_database_by_path() or
by the check_if_skip_database() function, and as a result
"lost+found" will be skipped).
In addition, it is necessary to slightly modify the verification
logic in the check_if_skip_database() function.
Also added a new test galera_sst_mariabackup_lost_found.test
MDEV-13318 introduced a condition to Mariabackup that can cause it to
hang if the server goes idle after writing a log block that has no
payload after the 12-byte header. Normal recovery in log0recv.cc would
allow blocks with exactly 12 bytes of length, and only reject blocks
where the length field is shorter than that.
log_group_read_log_seg() returns error when:
1) Calculated log block number does not correspond to read log block
number. This can be caused by:
a) Garbage or an incompletely written log block. We can exclude this
case by checking log block checksum if it's enabled(see innodb-log-checksums,
encrypted log block contains checksum always).
b) The log block is overwritten. In this case checksum will be correct and
read log block number will be greater then requested one.
2) When log block length is wrong. In this case recv_sys->found_corrupt_log
is set.
3) When redo log block checksum is wrong. In this case innodb code
writes messages to error log with the following prefix: "Invalid log
block checksum."
The fix processes all the cases above.
Parse SHOW SLAVE STATUS output for the "Using_Gtid" column. If the value
is "No", then old log file and position is backed up, otherwise gtid_slave_pos
is backed up.
In commit fe39d02f51 (MDEV-20638)
we removed some wake-up signaling of the master thread that should
have been there, to ensure a steady log checkpointing workload.
Common sense suggests that the commit omitted some necessary calls
to srv_inc_activity_count(). But, an attempt to add the call to
trx_flush_log_if_needed_low() as well as to reinstate the function
innobase_active_small() did not restore the performance for the
case where sync_binlog=1 is set.
Therefore, we will revert the entire commit in MariaDB Server 10.2.
In MariaDB Server 10.5, adding a srv_inc_activity_count() call to
trx_flush_log_if_needed_low() did restore the performance, so we
will not revert MDEV-20638 across all versions.
Regretfully, the parameter innodb_log_checksums was introduced
in MySQL 5.7.9 (the first GA release of that series) by
mysql/mysql-server@af0acedd88
which partly replaced a parameter that had been introduced in 5.7.8
mysql/mysql-server@22ba38218e
as innodb_log_checksum_algorithm.
Given that the CRC-32C operations are accelerated on many processor
implementations (AMD64 with SSE4.2; since MDEV-22669 also on IA-32
with SSE4.2, POWER 8 and later, ARMv8 with some extensions)
and by lookup tables when only generic SISD instructions are available,
there should be no valid reason to disable checksums.
In MariaDB 10.5.2, as a preparation for MDEV-12353, MDEV-19543 deprecated
and ignored the parameter innodb_log_checksums altogether. This should
imply that after a clean shutdown with innodb_log_checksums=OFF one
cannot upgrade to MariaDB Server 10.5 at all.
Due to these problems, let us deprecate the parameter innodb_log_checksums
and honor it only during server startup.
The command SET GLOBAL innodb_log_checksums will always set the
parameter to ON.
- Due to commit fe95cb2e40 (MDEV-16125),
InnoDB master thread does not need to call srv_resume_thread()
and therefore there is no need to wake up the thread.
Due to the above patch, InnoDB should remove the following dead code.
srv_check_activity(): Makes the parameter as in,out and returns the
recent activity value
innobase_active_small(): Removed
srv_active_wake_master_thread(): Removed
srv_wake_master_thread(): Removed
srv_active_wake_master_thread_low(): Removed
Simplify srv_master_thread() and remove switch cases, added the assert.
Replace srv_wake_master_thread() with srv_inc_activity_count()
INNOBASE_WAKE_INTERVAL: Removed
On FreeBSD, perl isn't in /usr/bin, its in /usr/local/bin or
elsewhere in the path.
Like storage/{maria/unittest/,}ma_test_* , we use /usr/bin/env to
find perl and run it.
MDEV-21298: mariabackup doesn't read from the [mariadbd] and [mariadbd-X.Y]
server option groups from configuration files
MDEV-21301: mariabackup doesn't read [mariadb-backup] option group in
configuration file
All three issues require to change the same code, that is why their
fixes are joined in one commit.
The fix is in invoking load_defaults_or_exit() and handle_options() for
backup-specific groups separately from client-server groups to let the last
handle_options() call fail on unknown backup-specific options.
The order of options procesing is the following:
1) Load server groups and process server options, ignore unknown
options
2) Load client groups and process client options, ignore unknown
options
3) Load backup groups and process client-server options, exit on
unknown option
4) Process --mysqld-args command line options, ignore unknown options
New global flag my_handle_options_init_variables was added to have
ability to invoke handle_options() for the same allowed options set
several times without re-initialising previously set option values.
--password value destroying is moved from option processing callback to
mariabackup's handle_options() function to have ability to invoke server's
handle_options() several times for the same possible allowed options
set.
Galera invokes wsrep_sst_mariabackup.sh with mysqld command line
options to configure mariabackup as close to the server as possible.
It is not known what server options are supported by mariabackup when the
script is invoked. That is why new mariabackup option "--mysqld-args" is added,
all unknown options that follow this option will be silently ignored.
wsrep_sst_mariabackup.sh was also changed to:
- use "--mysqld-args" mariabackup option to pass mysqld options,
- remove deprecated innobackupex mode,
- remove unsupported mariabackup options:
--encrypt
--encrypt-key
--rebuild-indexes
--rebuild-threads
error is logged
The fix is to set flag in ib::error::~error() and check it in
mariabackup.
ib::error::error() is replaced with ib::warn::warn() in
AIO::linux_create_io_ctx() because of two reasons:
1) if we leave it as is, then mariabackup MTR tests will fail with --mem
option, because Linux AIO can not be used on tmpfs,
2) when Linux AIO can not be initialized, InnoDB falls back to simulated
AIO, so such sutiation is not fatal error, it should be treated as warning.
Fix WolfSSL build:
- Do not build with TLSv1.0,it stopped working,at least with SChannel client
- Disable a test that depends on TLSv1.0
- define FP_MAX_BITS always, to fix 32bit builds.
- Increase MAX_AES_CTX_SIZE, to fix build on Linux
lock
--ftwrl-wait-timeout does not finish mariabackup execution when acquired
backup lock can't be grabbed for the certain amount of time, it just
waits for a long queries finishing before acquiring the lock to avoid
unnecessary locking.
This commit extends --ftwrl-wait-timeout so, that mariabackup execution
is finished if it waits for backup lock during certain amount of time.
config.
The solution is to read the system variable value on startup and to fill
databases_exclude_hash.
xb_load_list_string() became non-static and was reformatted. The system
variable value is read and processed in get_mysql_vars(), which was also
reformatted.
- Remove memory leaks reported by safemalloc
- Changed that all 0x strings are converted. This is needed
to easily be able to resolve safemalloc backtraces
In main.index_merge_myisam we remove the test that was added in
commit a2d24def8c because
it duplicates the test case that was added in
commit 5af12e4635.
For some reason, when mbstream is compiled with GCC 10,
ld will fail to link it due to a multiple definition of
datasink_buffer. The code appears to have been like that
since the very beginning.
Let us remove the duplicate dummy definition.
Clang 7 changed the behavior of vec_xxpermdi in order to match GCC's
behavior. After this change, code that used to work on Clang 6 stopped
to work on Clang >= 7.
Tested on Clang 6, 7, 8 and 9.
Reference: https://bugs.llvm.org/show_bug.cgi?id=38192
Upstream fix: 361aaf77a5
was restored.
Optionally rollback prepared XA's on "mariabackup --prepare".
The fix MUST NOT be ported on 10.5+, as MDEV-742 fix solves the issue for
slaves.
