KEY_MULTI_RANGE::range_flag does not have correct flag bits for
per-endpoint flags (NEAR_MIN, NEAR_MAX, NO_MIN_RANGE, NO_MAX_RANGE).
It only has bits for flags that describe both endpoints.
So
- Document this.
- Switch optimizer trace to using {start|end}_key.flag values, instead.
This fixes the bug.
- Switch records_in_column_ranges() to doing that too. (This used to
work, because KEY_MULTI_RANGE::range_flag had correct flag value
for the last key component, and EITS only uses one-component
pseudo-indexes)
- multi_range_read_info_const now uses the new records_in_range interface
- Added handler::avg_io_cost()
- Don't calculate avg_io_cost() in get_sweep_read_cost if avg_io_cost is
not 1.0. In this case we trust the avg_io_cost() from the handler.
- Changed test_quick_select to use TIME_FOR_COMPARE instead of
TIME_FOR_COMPARE_IDX to align this with the rest of the code.
- Fixed bug when using test_if_cheaper_ordering where we didn't use
keyread if index was changed
- Fixed a bug where we didn't use index only read when using order-by-index
- Added keyread_time() to HEAP.
The default keyread_time() was optimized for blocks and not suitable for
HEAP. The effect was the HEAP prefered table scans over ranges for btree
indexes.
- Fixed get_sweep_read_cost() for HEAP tables
- Ensure that range and ref have same cost for simple ranges
Added a small cost (MULTI_RANGE_READ_SETUP_COST) to ranges to ensure
we favior ref for range for simple queries.
- Fixed that matching_candidates_in_table() uses same number of records
as the rest of the optimizer
- Added avg_io_cost() to JT_EQ_REF cost. This helps calculate the cost for
HEAP and temporary tables better. A few tests changed because of this.
- heap::read_time() and heap::keyread_time() adjusted to not add +1.
This was to ensure that handler::keyread_time() doesn't give
higher cost for heap tables than for normal tables. One effect of
this is that heap and derived tables stored in heap will prefer
key access as this is now regarded as cheap.
- Changed cost for index read in sql_select.cc to match
multi_range_read_info_const(). All index cost calculation is now
done trough one function.
- 'ref' will now use quick_cost for keys if it exists. This is done
so that for '=' ranges, 'ref' is prefered over 'range'.
- scan_time() now takes avg_io_costs() into account
- get_delayed_table_estimates() uses block_size and avg_io_cost()
- Removed default argument to test_if_order_by_key(); simplifies code
Prototype change:
- virtual ha_rows records_in_range(uint inx, key_range *min_key,
- key_range *max_key)
+ virtual ha_rows records_in_range(uint inx, const key_range *min_key,
+ const key_range *max_key,
+ page_range *res)
The handler can ignore the page_range parameter. In the case the handler
updates the parameter, the optimizer can deduce the following:
- If previous range's last key is on the same block as next range's first
key
- If the current key range is in one block
- We can also assume that the first and last block read are cached!
This can be used for a better calculation of IO seeks when we
estimate the cost of a range index scan.
The parameter is fully implemented for MyISAM, Aria and InnoDB.
A separate patch will update handler::multi_range_read_info_const() to
take the benefits of this change and also remove the double
records_in_range() calls that are not anymore needed.
Changes:
- maria_create() now uses a bit in the parameter flags to check if table
should be encrypted instead of using maria_encrypted_tables.
- Don't encrypt tables that are to be converted to S3
- Added encrypted flag to ARIA_TABLE_CAPABILITIES
- maria_chk --description now prints if table is encrypted. Other
operations is not allowed on encrypted tables.
This patch complements the patch that fixes bug MDEV-18479.
This patch takes care of possible overflow when calculating the
estimated number of rows in a materialized derived table / view.
A read-only storage engine that stores it's data in (aws) S3
To store data in S3 one could use ALTER TABLE:
ALTER TABLE table_name ENGINE=S3
libmarias3 integration done by Sergei Golubchik
libmarias3 created by Andrew Hutchings
Some places didn't match the previous rules, making the Floor
address wrong.
Additional sed rules:
sed -i -e 's/Place.*Suite .*, Boston/Street, Fifth Floor, Boston/g'
sed -i -e 's/Suite .*, Boston/Fifth Floor, Boston/g'
This patch implements engine independent unique hash index.
Usage:- Unique HASH index can be created automatically for blob/varchar/test column whose key
length > handler->max_key_length()
or it can be explicitly specified.
Automatic Creation:-
Create TABLE t1 (a blob unique);
Explicit Creation:-
Create TABLE t1 (a int , unique(a) using HASH);
Internal KEY_PART Representations:-
Long unique key_info will have 2 representations.
(lets understand this with an example create table t1(a blob, b blob , unique(a, b)); )
1. User Given Representation:- key_info->key_part array will be similar to what user has defined.
So in case of example it will have 2 key_parts (a, b)
2. Storage Engine Representation:- In this case there will be only one key_part and it will point to
HASH_FIELD. This key_part will be always after user defined key_parts.
So:- User Given Representation [a] [b] [hash_key_part]
key_info->key_part ----^
Storage Engine Representation [a] [b] [hash_key_part]
key_info->key_part ------------^
Table->s->key_info will have User Given Representation, While table->key_info will have Storage Engine
Representation.Representation can be changed into each other by calling re/setup_keyinfo_hash function.
Working:-
1. So when user specifies HASH_INDEX or key_length is > handler->max_key_length(), In mysql_prepare_create_table
One extra vfield is added (for each long unique key). And key_info->algorithm is set to HA_KEY_ALG_LONG_HASH.
2. In init_from_binary_frm_image values for hash_keypart is set (like fieldnr , field and flags)
3. In parse_vcol_defs, HASH_FIELD->vcol_info is created. Item_func_hash is used with list of Item_fields,
When Explicit length is given by user then Item_left is used to concatenate Item_field values.
4. In ha_write_row/ha_update_row check_duplicate_long_entry_key is called which will create the hash key from
table->record[0] and then call ha_index_read_map , if we found duplicated hash , we will compare the result
field by field.
MDEV-11415 Remove excessive undo logging during ALTER TABLE…ALGORITHM=COPY
Move a test from innodb.rename_table_debug to innodb.alter_copy.
ha_innobase::extra(HA_EXTRA_BEGIN_ALTER_COPY): Register id-versioned
tables so that mysql.transaction_registry will be updated, even for
empty tables that are subjected to ALTER TABLE…ALGORITHM=COPY.
If a crash occurs during ALTER TABLE…ALGORITHM=COPY, InnoDB would spend
a lot of time rolling back writes to the intermediate copy of the table.
To reduce the amount of busy work done, a work-around was introduced in
commit fd069e2bb3 in MySQL 4.1.8 and 5.0.2,
to commit the transaction after every 10,000 inserted rows.
A proper fix would have been to disable the undo logging altogether and
to simply drop the intermediate copy of the table on subsequent server
startup. This is what happens in MariaDB 10.3 with MDEV-14717,MDEV-14585.
In MariaDB 10.2, the intermediate copy of the table would be left behind
with a name starting with the string #sql.
This is a backport of a bug fix from MySQL 8.0.0 to MariaDB,
contributed by jixianliang <271365745@qq.com>.
Unlike recent MySQL, MariaDB supports ALTER IGNORE. For that operation
InnoDB must for now keep the undo logging enabled, so that the latest
row can be rolled back in case of an error.
In Galera cluster, the LOAD DATA statement will retain the existing
behaviour and commit the transaction after every 10,000 rows if
the parameter wsrep_load_data_splitting=ON is set. The logic to do
so (the wsrep_load_data_split() function and the call
handler::extra(HA_EXTRA_FAKE_START_STMT)) are joint work
by Ji Xianliang and Marko Mäkelä.
The original fix:
Author: Thirunarayanan Balathandayuthapani <thirunarayanan.balathandayuth@oracle.com>
Date: Wed Dec 2 16:09:15 2015 +0530
Bug#17479594 AVOID INTERMEDIATE COMMIT WHILE DOING ALTER TABLE ALGORITHM=COPY
Problem:
During ALTER TABLE, we commit and restart the transaction for every
10,000 rows, so that the rollback after recovery would not take so long.
Fix:
Suppress the undo logging during copy alter operation. If fts_index is
present then insert directly into fts auxiliary table rather
than doing at commit time.
ha_innobase::num_write_row: Remove the variable.
ha_innobase::write_row(): Remove the hack for committing every 10000 rows.
row_lock_table_for_mysql(): Remove the extra 2 parameters.
lock_get_src_table(), lock_is_table_exclusive(): Remove.
Reviewed-by: Marko Mäkelä <marko.makela@oracle.com>
Reviewed-by: Shaohua Wang <shaohua.wang@oracle.com>
Reviewed-by: Jon Olav Hauglid <jon.hauglid@oracle.com>
Feature Definition:-
This feature adds invisible column functionality to server.
There is 4 level of "invisibility":
1. Not invisible (NOT_INVISIBLE) — Normal columns created by the user
2. A little bit invisible (USER_DEFINED_INVISIBLE) — columns that the
user has marked invisible. They aren't shown in SELECT * and they
don't require values in INSERT table VALUE (...). Otherwise
they behave as normal columns.
3. More invisible (SYSTEM_INVISIBLE) — Can be queried explicitly,
otherwise invisible from everything. Think ROWID sytem column.
Because they're invisible from ALTER TABLE and from CREATE TABLE
they cannot be created or dropped, they're created by the system.
User cant not create a column name which is same as of
SYSTEM_INVISIBLE.
4. Very invisible (COMPLETELY_INVISIBLE) — as above, but cannot be
queried either. They can only show up in EXPLAIN EXTENDED (might
be possible for a very invisible indexed virtual column) but
otherwise they don't exist for the user.If user creates a columns
which has same name as of COMPLETELY_INVISIBLE then
COMPLETELY_INVISIBLE column is renamed again. So it is completely
invisible from user.
Invisible Index(HA_INVISIBLE_KEY):-
Creation of invisible columns require a new type of index which
will be only visible to system. User cant see/alter/create/delete
this index. If user creates a index which is same name as of
invisible index then it will be renamed.
Syntax Details:-
Only USER_DEFINED_INVISIBLE column can be created by user. This
can be created by adding INVISIBLE suffix after column definition.
Create table t1( a int invisible, b int);
Rules:-
There are some rules/restrictions related to use of invisible columns
1. All the columns in table cant be invisible.
Create table t1(a int invisible); \\error
Create table t1(a int invisible, b int invisble); \\error
2. If you want invisible column to be NOT NULL then you have to supply
Default value for the column.
Create table t1(a int, b int not null); \\error
3. If you create a view/create table with select * then this wont copy
invisible fields. So newly created view/table wont have any invisible
columns.
Create table t2 as select * from t1;//t2 wont have t1 invisible column
Create view v1 as select * from t1;//v1 wont have t1 invisible column
4. Invisibility wont be forwarded to next table in any case of create
table/view as select */(a,b,c) from table.
Create table t2 as select a,b,c from t1; // t2 will have t1 invisible
// column(b), but this wont be invisible in t2
Create view v1 as select a,b,c from t1; // v1 will have t1 invisible
// column(b), but this wont be invisible in v1
Implementation Details:-
Parsing:- INVISIBLE_SYM is added into vcol_attribute(so its like unique
suffix), It is also added into keyword_sp_not_data_type so that table
can have column with name invisible.
Implementation detail is given by each modified function/created function.
(Some function are left as they were self explanatory)
(m= Modified, n= Newly Created)
mysql_prepare_create_table(m):- Extra checks for invisible columns are
added. Also some DEBUG_EXECUTE_IF are also added for test cases.
mysql_prepare_alter_table(m):- Now this will drop all the
COMPLETELY_INVISIBLE column and HA_INVISIBLE_KEY index. Further
Modifications are made to stop drop/change/delete of SYSTEM_INVISIBLE
column.
build_frm_image(m):- Now this allows incorporating field_visibility
status into frm image. To remain compatible with old frms
field_visibility info will be only written when any of the field is
not NOT_INVISIBLE.
extra2_write_additional_field_properties(n):- This will write field
visibility info into buffer. We first write EXTRA2_FIELD_FLAGS into
buffer/frm , then each next char will have field_visibility for each
field.
init_from_binary_frm_image(m):- Now if we get EXTRA2_FIELD_FLAGS,
then we will read the next n(n= number of fields) chars and set the
field_visibility. We also increment
thd->status_var.feature_invisible_columns. One important thing to
note if we find out that key contains a field whose visibility is
> USER_DEFINED_INVISIBLE then , we declare this key as invisible
key.
sql_show.cc is changed accordingly to make show table, show keys
correct.
mysql_insert(m):- If we get to know that we are doing insert in
this way insert into t1 values(1,1); without explicitly specifying
columns, then we check for if we have invisible fields if yes then
we reset the whole record, Why ? Because first we want hidden columns
to get default/null value. Second thing auto_increment has property
no default and no null which voilates invisible key rule 2, And
because of this it was giving error. Reseting table->record[0]
eliminates this issue. More info put breakpoint on handler::write_row
and see auto_increment value.
fill_record(m):- we continue loop if we find invisible column because
this is already reseted/will get its value if it is default.
Test cases:- Since we can not directly add > USER_DEFINED_INVISIBLE
column then I have debug_dbug to create it in mysql_prepare_create_table.
Patch Credit:- Serg Golubchik
Other things:
- Cleanup of allocated bitmaps done in open(), which
simplifies init_partition_bitmaps()
- Add needed defines in ha_spider.cc to enable new spider code
- Fixed some DBUG_PRINT() to be consistent with normal code
- Removed end space
- The changes in test cases partition_innodb, partition_range,
partition_pruning etc are becasue partitions can now more exactly
calculate the number of rows in a range.
Contains spider patches:
014,015,023,033,035,037,040,042,044,045,049,050,051,053,059
- Added sql/mariadb.h file that should be included first by files in sql
directory, if sql_plugin.h is not used (sql_plugin.h adds SHOW variables
that must be done before my_global.h is included)
- Removed a lot of include my_global.h from include files
- Removed include's of some files that my_global.h automatically includes
- Removed duplicated include's of my_sys.h
- Replaced include my_config.h with my_global.h
- SETVAL(sequence_name, next_value, is_used, round)
- ALTER SEQUENCE, including RESTART WITH
Other things:
- Added handler::extra() option HA_EXTRA_PREPARE_FOR_ALTER_TABLE to signal
ha_sequence() that it should allow write_row statments.
- ALTER ONLINE TABLE now works with SEQUENCE:s
Working features:
CREATE OR REPLACE [TEMPORARY] SEQUENCE [IF NOT EXISTS] name
[ INCREMENT [ BY | = ] increment ]
[ MINVALUE [=] minvalue | NO MINVALUE ]
[ MAXVALUE [=] maxvalue | NO MAXVALUE ]
[ START [ WITH | = ] start ] [ CACHE [=] cache ] [ [ NO ] CYCLE ]
ENGINE=xxx COMMENT=".."
SELECT NEXT VALUE FOR sequence_name;
SELECT NEXTVAL(sequence_name);
SELECT PREVIOUS VALUE FOR sequence_name;
SELECT LASTVAL(sequence_name);
SHOW CREATE SEQUENCE sequence_name;
SHOW CREATE TABLE sequence_name;
CREATE TABLE sequence-structure ... SEQUENCE=1
ALTER TABLE sequence RENAME TO sequence2;
RENAME TABLE sequence TO sequence2;
DROP [TEMPORARY] SEQUENCE [IF EXISTS] sequence_names
Missing features
- SETVAL(value,sequence_name), to be used with replication.
- Check replication, including checking that sequence tables are marked
not transactional.
- Check that a commit happens for NEXT VALUE that changes table data (may
already work)
- ALTER SEQUENCE. ANSI SQL version of setval.
- Share identical sequence entries to not add things twice to table list.
- testing insert/delete/update/truncate/load data
- Run and fix Alibaba sequence tests (part of mysql-test/suite/sql_sequence)
- Write documentation for NEXT VALUE / PREVIOUS_VALUE
- NEXTVAL in DEFAULT
- Ensure that NEXTVAL in DEFAULT uses database from base table
- Two NEXTVAL for same row should give same answer.
- Oracle syntax sequence_table.nextval, without any FOR or FROM.
- Sequence tables are treated as 'not read constant tables' by SELECT; Would
be better if we would have a separate list for sequence tables so that
select doesn't know about them, except if refereed to with FROM.
Other things done:
- Improved output for safemalloc backtrack
- frm_type_enum changed to Table_type
- Removed lex->is_view and replaced with lex->table_type. This allows
use to more easy check if item is view, sequence or table.
- Added table flag HA_CAN_TABLES_WITHOUT_ROLLBACK, needed for handlers
that want's to support sequences
- Added handler calls:
- engine_name(), to simplify getting engine name for partition and sequences
- update_first_row(), to be able to do efficient sequence implementations.
- Made binlog_log_row() global to be able to call it from ha_sequence.cc
- Added handler variable: row_already_logged, to be able to flag that the
changed row is already logging to replication log.
- Added CF_DB_CHANGE and CF_SCHEMA_CHANGE flags to simplify
deny_updates_if_read_only_option()
- Added sp_add_cfetch() to avoid new conflicts in sql_yacc.yy
- Moved code for add_table_options() out from sql_show.cc::show_create_table()
- Added String::append_longlong() and used it in sql_show.cc to simplify code.
- Added extra option to dd_frm_type() and ha_table_exists to indicate if
the table is a sequence. Needed by DROP SQUENCE to not drop a table.
Define my_thread_id as an unsigned type, to avoid mismatch with
ulonglong. Change some parameters to this type.
Use size_t in a few more places.
Declare many flag constants as unsigned to avoid sign mismatch
when shifting bits or applying the unary ~ operator.
When applying the unary ~ operator to enum constants, explictly
cast the result to an unsigned type, because enum constants can
be treated as signed.
In InnoDB, change the source code line number parameters from
ulint to unsigned type. Also, make some InnoDB functions return
a narrower type (unsigned or uint32_t instead of ulint;
bool instead of ibool).
* remove new InnoDB-specific ER_ and HA_ERR_ codes
* renamed few old ER_ and HA_ERR_ error messages to be less MyISAM-specific
* remove duplicate enum definitions (durability_properties, icp_result)
* move new mysql-test include files to their owner suite
* rename xtradb.rdiff files to *-disabled
* remove mistakenly committed helper perl module
* remove long obsolete handler::ha_statistic_increment() method
* restore the standard C xid_t structure to not have setters and getters
* remove xid_t::reset that was cleaning too much
* move MySQL-5.7 ER_ codes where they belong
* fir innodb to include service_wsrep.h not internal wsrep headers
* update tests and results
Contains also:
MDEV-10549 mysqld: sql/handler.cc:2692: int handler::ha_index_first(uchar*): Assertion `table_share->tmp_table != NO_TMP_TABLE || m_lock_type != 2' failed. (branch bb-10.2-jan)
Unlike MySQL, InnoDB still uses THR_LOCK in MariaDB
MDEV-10548 Some of the debug sync waits do not work with InnoDB 5.7 (branch bb-10.2-jan)
enable tests that were fixed in MDEV-10549
MDEV-10548 Some of the debug sync waits do not work with InnoDB 5.7 (branch bb-10.2-jan)
fix main.innodb_mysql_sync - re-enable online alter for partitioned innodb tables
- Removing the "diff_if_only_endspace_difference" argument from
MY_COLLATION_HANDLER::strnncollsp(), my_strnncollsp_simple(),
as well as in the function template MY_FUNCTION_NAME(strnncollsp)
in strcoll.ic
- Removing the "diff_if_only_space_different" from ha_compare_text(),
hp_rec_key_cmp().
- Adding a new function my_strnncollsp_padspace_bin() and reusing
it instead of duplicate code pieces in my_strnncollsp_8bit_bin(),
my_strnncollsp_latin1_de(), my_strnncollsp_tis620(),
my_strnncollsp_utf8_cs().
- Adding more tests for better coverage of the trailing space handling.
- Removing the unused definition of HA_END_SPACE_ARE_EQUAL
Fixed by adding HA_ERR_INFO as a informational warning to by used by MyISAM
This is used to inform when we create a backup copy of the data file.
Also improved informational messages when creating backup copies of data and index files
Cleanups:
* remove unused HA_EXTRA_EXPORT (can be added later if needed, e.g. for Aria)
* clarify the meaning of HA_CAN_EXPORT
* make all engines that support EXPORT to announce it
* reduce code duplication
Update InnoDB to 5.6.14
Apply MySQL-5.6 hack for MySQL Bug#16434374
Move Aria-only HA_RTREE_INDEX from my_base.h to maria_def.h (breaks an assert in InnoDB)
Fix InnoDB memory leak
mysql_upgrade --help now also prints out --default options and variable values.
mysql_upgrade now prints permission errors.
mysql_upgrade doesn't print some non essential info if --silent is used.
Added handler error message about incompatible versions
Fixed that mysqlbug and mysql_install_db have the executable flag set.
Removed executable flag for some non executable files.
Changed in mysql_install_db askmonty.org to mariadb.com.
Ensured that all client executables prints --default options the same way.
Allow REPAIR ... USE_FRM for old .frm files if the are still compatible.
Extended shown error for storage engine messages.
client/mysql.cc:
print_defaults() should be first (as in all other programs)
client/mysql_upgrade.c:
--help now also prints out --default options and variable values
Print out error if wrong permissions
Don't print info if --silent
client/mysqladmin.cc:
print_defaults() should be first (as in all other programs)
client/mysqlbinlog.cc:
Added print_defaults() to --help
client/mysqlcheck.c:
Added empty line in --help
client/mysqlimport.c:
Added empty line in --help
client/mysqlshow.c:
Made --help compatible
client/mysqlslap.c:
Made --help compatible
client/mysqltest.cc:
Added print_defaults() to --help
include/handler_ername.h:
Added handler error message
include/my_base.h:
Added handler error message
mysql-test/r/mysql_upgrade.result:
Updated results
mysql-test/r/repair.result:
Added test case for better error messages
mysql-test/std_data/host_old.MYD:
Added test case for better error messages
mysql-test/std_data/host_old.MYI:
Added test case for better error messages
mysql-test/std_data/host_old.frm:
Added test case for better error messages
mysql-test/t/repair.test:
Added test case for better error messages
mysys/my_handler_errors.h:
Added handler error message
scripts/CMakeLists.txt:
Fixed that mysqlbug and mysql_install_db have the executable flag set
scripts/mysql_install_db.sh:
askmonty.org -> mariadb.com
sql/ha_partition.cc:
Sometimes table_type() can be called for errors even if partition didn't manage to open any files
sql/handler.cc:
Write clear text for not handled, but defined error messages.
sql/share/errmsg-utf8.txt:
Extended shown error for storage engine messages
sql/sql_admin.cc:
Allow REPAIR ... USE_FRM for old .frm files if the are still compatible
storage/myisam/ha_myisam.cc:
Use new error message
merged from 5.6:
Bug#14521864: MYSQL 5.1 TO 5.5 BUGS PARTITIONING
Bug#16589511: MYSQL_UPGRADE FAILS TO WRITE OUT ENTIRE ALTER TABLE ... ALGORITHM= ... STATEMENT
Bug#16274455: CAN NOT ACESS PARTITIONED TABLES WHEN DOWNGRADED FROM 5.6.11 TO 5.6.10
plus minor changes from 5.6, mainly comments
- Character set code & tests from Alexander Barkov
- Integration with ALTER TABLE, REPAIR and open_table from Monty
The problem was that MySQL 5.6 added some croatian and vitanamese character set collations that are incompatible with MariaDB.
The fix is to move the MariaDB conflicting collation numbers out of the region that MySQL is likely to use.
mysql_upgrade, REPAIR TABLE or ALTER TABLE will fix the collations.
If one tries to access and old incompatible table, one will get the error "Table upgrade required...."
After this patch, MariaDB supports all the MySQL character set collations and the old MariaDB croatian collations, which are closer to the latest standard than the MySQL versions.
New character sets:
ucs2_croatian_mysql561_uca_ci
utf8_croatian_mysql561_uca_ci
utf16_croatian_mysql561_uca_ci
utf32_croatian_mysql561_uca_ci
utf8mb4_croatian_mysql561_uca_ci
Other things:
- Fixed some compiler warnings
- mysql_upgrade prints information about repaired tables.
- Increased version number
VERSION:
Increased VERSION number
client/mysqlcheck.c:
Print repaired table name when using --verbose
include/m_ctype.h:
Add new MariaDB collation regions that are not likely to conflict with MySQL
include/my_base.h:
Added flag to detect if table was opened for ALTER TABLE
mysql-test/r/ctype_ldml.result:
Updated result
mysql-test/r/ctype_uca.result:
Updated result
mysql-test/r/ctype_upgrade.result:
Updated result
mysql-test/r/ctype_utf16_uca.result:
Updated result
mysql-test/r/ctype_utf32_uca.result:
Updated result
mysql-test/r/ctype_utf8mb4_uca.result:
Updated result
mysql-test/std_data/ctype_upgrade:
Test files for testing upgrading of conflicting collations
mysql-test/suite/engines/funcs/r/db_alter_collate_ascii.result:
New collations added
mysql-test/suite/engines/funcs/r/db_alter_collate_utf8.result:
New collations added
mysql-test/suite/innodb/r/innodb_ctype_ldml.result:
Updated test result
mysql-test/suite/innodb/t/innodb_ctype_ldml.test:
Updated test result
mysql-test/suite/plugins/r/show_all_plugins.result:
Updated version number
mysql-test/suite/roles/create_and_drop_role_invalid_user_table.result:
Updated version number
mysql-test/t/ctype_ldml.test:
Updated test
mysql-test/t/ctype_uca.test:
Testing of new collations
mysql-test/t/ctype_upgrade.test:
Testing of upgrading tables with old collations
The test ensures that:
- We will get an error if we try to open a table with old collations.
- CHECK TABLE will detect that the table needs to be upgraded.
- ALTER TABLE and REPAIR will fix the table.
- mysql_upgrade works as expected
mysql-test/t/ctype_utf16_uca.test:
Testing of new collations
mysql-test/t/ctype_utf32_uca.test:
Testing of new collations
mysql-test/t/ctype_utf8mb4_uca.test:
Testing of new collations
mysys/charset-def.c:
Added new character sets
mysys/charset.c:
Always give an error, if requested, if a character set didn't exist
sql/handler.cc:
- Added upgrade_collation() to check if collation is compatible with old version
- check_collation_compatibility() checks if we are using an old collation from MariaDB 5.5 or MySQL 5.6
- ha_check_for_upgrade() returns HA_ADMIN_NEEDS_ALTER if we have an incompatible collation
sql/handler.h:
Added new prototypes
sql/sql_table.cc:
- Mark that tables are opened for ALTER TABLE
- If table needs to be upgraded, ensure we are not using online alter table.
sql/table.cc:
- If we are using an old incompatible collation, change to use the new one and mark table as incompatible.
- Give an error if we try to open an incompatible table.
sql/table.h:
Added error that table needs to be rebuild
storage/connect/ha_connect.cc:
Fixed compiler warning
strings/ctype-uca.c:
New character sets
includes:
* remove some remnants of "Bug#14521864: MYSQL 5.1 TO 5.5 BUGS PARTITIONING"
* introduce LOCK_share, now LOCK_ha_data is strictly for engines
* rea_create_table() always creates .par file (even in "frm-only" mode)
* fix a 5.6 bug, temp file leak on dummy ALTER TABLE
* persistent table versions in the extra2
* ha_archive::frm_compare using TABLE_SHARE::tabledef_version
* distinguish between "important" and "optional" extra2 frm values
* write engine-defined attributes (aka "table options") to extra2, not to extra,
but still read from the old location, if they're found there.
* print "table doesn't exist in engine" when a table doesn't exist in the engine,
instead of "file not found" (if no file was involved)
* print a complete filename that cannot be found ('t1.MYI', not 't1')
* it's not an error for a DROP if a table doesn't exist in the engine (or some table
files cannot be found) - if the DROP succeeded regardless
The patch lifts the limitation of the current implementation
of ALTER TABLE that does not allow to build unique/primary
indexes by sort for MyISAM and Aria engines.
- Adding %M my_sprintf() modifier that prints error number - system-error-text
- Modified mysys, mysql_client and SQL error messages to use %M instead of %d
- Added my_strerror()
Updated handler errors to 5.6 error numbers
Updated text for a few error messages (to match 5.6)
Increased length of command name in error output
extra/comp_err.c:
Added support for %M
include/my_base.h:
Updated handler errors to 5.6 error numbers
include/my_sys.h:
Added my_strerror()
libmysql/errmsg.c:
Updated error messages to use %M
mysql-test/r/errors.result:
Updated result as error message have changed
mysql-test/r/innodb_mysql_sync.result:
Updated result with text for errno
mysql-test/r/myisam-system.result:
Updated result with text for errno
mysql-test/r/myisam.result:
Updated result as error message have changed
mysql-test/r/myisampack.result:
Updated result with text for errno
mysql-test/r/mysql.result:
Updated result with text for errno
mysql-test/r/mysql_upgrade.result:
Updated result with text for errno
mysql-test/r/partition_datatype.result:
Updated result as error message have changed
mysql-test/r/partition_innodb_plugin.result:
Updated result with text for errno
mysql-test/r/ps_1general.result:
Updated result with text for errno
mysql-test/r/trigger.result:
Updated result with text for errno
mysql-test/r/type_bit.result:
Updated result as error message have changed
mysql-test/r/type_bit_innodb.result:
Updated result as error message have changed
mysql-test/r/type_blob.result:
Updated result as error message have changed
mysql-test/suite/archive/archive.result:
Updated result with text for errno
mysql-test/suite/binlog/r/binlog_index.result:
Updated result with text for errno
mysql-test/suite/binlog/r/binlog_ioerr.result:
Updated result with text for errno
mysql-test/suite/csv/csv.result:
Updated result with text for errno
mysql-test/suite/federated/federated_bug_35333.result:
Updated result with text for errno
mysql-test/suite/innodb/r/innodb-create-options.result:
Updated result with text for errno
mysql-test/suite/innodb/r/innodb-index.result:
Updated result with text for errno
mysql-test/suite/innodb/r/innodb-zip.result:
Updated result as error message have changed
mysql-test/suite/innodb/r/innodb.result:
Updated result with text for errno
mysql-test/suite/innodb/r/innodb_bug21704.result:
Updated result with text for errno
mysql-test/suite/innodb/r/innodb_bug46000.result:
Updated result with text for errno
mysql-test/suite/innodb/r/innodb_bug53591.result:
Updated result as error message have changed
mysql-test/suite/innodb/r/innodb_corrupt_bit.result:
New error numbers
mysql-test/suite/innodb/r/innodb_prefix_index_liftedlimit.result:
Updated result as error message have changed
mysql-test/suite/innodb/t/innodb-create-options.test:
Added regexp to avoid system error text
mysql-test/suite/innodb/t/innodb-zip.test:
Added regexp to avoid system error text
mysql-test/suite/maria/maria-recovery2.result:
Updated supression rule
mysql-test/suite/maria/maria-recovery2.test:
Updated supression rule
mysql-test/suite/maria/maria.result:
Updated result as error message have changed
mysql-test/suite/parts/r/partition_bit_innodb.result:
Updated result as error message have changed
mysql-test/suite/parts/r/partition_bit_myisam.result:
Updated result as error message have changed
mysql-test/suite/percona/percona_innodb_fake_changes.result:
Updated result with text for errno
mysql-test/suite/perfschema/r/dml_cond_instances.result:
Updated result as error message have changed
mysql-test/suite/perfschema/r/dml_events_waits_current.result:
Updated result as error message have changed
mysql-test/suite/perfschema/r/dml_events_waits_history.result:
Updated result as error message have changed
mysql-test/suite/perfschema/r/dml_events_waits_history_long.result:
Updated result as error message have changed
mysql-test/suite/perfschema/r/dml_ews_by_instance.result:
Updated result as error message have changed
mysql-test/suite/perfschema/r/dml_ews_by_thread_by_event_name.result:
Updated result as error message have changed
mysql-test/suite/perfschema/r/dml_ews_global_by_event_name.result:
Updated result as error message have changed
mysql-test/suite/perfschema/r/dml_file_instances.result:
Updated result as error message have changed
mysql-test/suite/perfschema/r/dml_file_summary_by_event_name.result:
Updated result as error message have changed
mysql-test/suite/perfschema/r/dml_file_summary_by_instance.result:
Updated result as error message have changed
mysql-test/suite/perfschema/r/dml_mutex_instances.result:
Updated result as error message have changed
mysql-test/suite/perfschema/r/dml_performance_timers.result:
Updated result as error message have changed
mysql-test/suite/perfschema/r/dml_rwlock_instances.result:
Updated result as error message have changed
mysql-test/suite/perfschema/r/dml_threads.result:
Updated result as error message have changed
mysql-test/suite/perfschema/r/misc.result:
Updated result with text for errno
mysql-test/suite/perfschema/r/privilege.result:
Updated result with text for errno
mysql-test/suite/rpl/r/rpl_EE_err.result:
Updated result with text for errno
mysql-test/suite/rpl/r/rpl_binlog_errors.result:
Updated result with text for errno
mysql-test/suite/rpl/r/rpl_drop_db.result:
Updated result with text for errno
mysys/errors.c:
Updated error messages to use %M
Changed all errors to use Errcode: consistenly
mysys/my_handler_errors.h:
Updated handler errors to 5.6 error numbers
sql/share/errmsg-utf8.txt:
Updated error messages to use %M
sql/sys_vars.cc:
Added error number to ER_EVENT_SET_VAR_ERROR
strings/my_vsnprintf.c:
Added %M my_sprintf() modifier that prints error number - system-error-text
Simplify code
Movied common code to function
Removed some casts that was not necessary when reading integer/unsigned int stored in longlong
Added my_strerror()
unittest/mysys/my_vsnprintf-t.c:
Added testing of %M
There are two threads. In one thread, dml operation is going on
involving cascaded update operation. In another thread, alter
table add foreign key constraint is happening. Under these
circumstances, it is possible for the dml thread to access a
dict_foreign_t object that has been freed by the ddl thread.
The debug sync test case provides the sequence of operations.
Without fix, the test case will crash the server (because of
newly added assert). With fix, the alter table stmt will return
an error message.
rb:947
approved by Jimmy Yang
sql/sql_insert.cc:
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
******
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
sql/sql_table.cc:
small cleanup
******
small cleanup
This fix was accidentally pushed to mysql-5.1 after the 5.1.59 clone-off in
bzr revision id marko.makela@oracle.com-20110829081642-z0w992a0mrc62s6w
with the fix of Bug#12704861 Corruption after a crash during BLOB update
but not merged to mysql-5.5 and upwards.
In the Barracuda formats, the clustered index record no longer
contains a prefix of off-page columns. Because of this, the undo log
must contain these prefixes, so that purge and multi-versioning will
continue to work. However, this also means that an undo log record can
become too big to fit in an undo log page. (It is a limitation of the
undo log that undo records cannot span across multiple pages.)
In case the checks for undo log size fail when CREATE TABLE or CREATE
INDEX is executed, we need a fallback that blocks a modification
operation when the undo log record would exceed the maximum size.
trx_undo_free_last_page_func(): Renamed from trx_undo_free_page_in_rollback().
Define the trx_t parameter only in debug builds.
trx_undo_free_last_page(): Wrapper for trx_undo_free_last_page_func().
Pass the trx_t parameter only in debug builds.
trx_undo_truncate_end_func(): Renamed from trx_undo_truncate_end().
Define the trx_t parameter only in debug builds. Rewrite a for(;;) loop
as a while loop for clarity.
trx_undo_truncate_end(): Wrapper for from trx_undo_truncate_end_func().
Pass the trx_t parameter only in debug builds.
trx_undo_erase_page_end(): Return TRUE if the page was non-empty
to begin with. Refuse to erase empty pages.
trx_undo_report_row_operation(): If the page for which the undo log
was too big was empty, free the undo page and return DB_TOO_BIG_RECORD.
rb:749 approved by Inaam Rana
Also addressed issues in bug #11745133, where we could mark a table
corrupted instead of crashing the server when found a corrupted buffer/page
if the table created with innodb_file_per_table on.
With this change, the index prefix column length lifted from 767 bytes
to 3072 bytes if "innodb_large_prefix" is set to "true".
rb://603 approved by Marko
Original code by Zardosht Kasheff
sql/handler.cc:
Added HA_ERR_DISK_FULL and ENOSPC (for handler that uses normal errno).
This sets 'fatal_error' to ensure that the error is logged to err file (which hopefully is on another disk...)
- In Maria/MyISAM: Release/re-acquire locks to give queries that wait on them a chance to make progress
- In Maria/MyISAM: Change from numeric constants to ICP_RES values.
- In Maria: Do check index condition in maria_rprev() (was lost in the merge/backport?)
- In Maria/MyISAM/XtraDB: Check if the query was killed, and return immediately if it was.
Added new storage engine error: HA_ERR_ABORTED_BY_USER, for handler to signal that it detected a kill of the query and aborted
Authors: Sergey Petrunia & Monty
include/my_base.h:
Added HA_ERR_ABORTED_BY_USER, for handler to signal that it detected a kill of the query and aborted
include/my_handler.h:
Added comment
mysql-test/r/myisam_icp.result:
Updated test
mysql-test/t/myisam_icp.test:
Drop used tables at start of test
Added test case that can help with manual testing of killing index condition pushdown query.
mysys/my_handler_errors.h:
Text for new storage engine error
sql/handler.cc:
If engine got HA_ERR_ABORTED_BY_USER, send kill message.
sql/multi_range_read.cc:
Return error code
storage/maria/ha_maria.cc:
Added ma_killed_in_mariadb() to detect kill.
Ensure that file->external_ref points to TABLE object.
storage/maria/ma_extra.c:
Dummy test-if-killed for standalone
storage/maria/ma_key.c:
If ma_check_index_cond() fails, set my_errno and info->cur_row.lastpos
storage/maria/ma_rkey.c:
Release/re-acquire locks to give queries that wait on them a chance to make progress
Check if the query was killed, and return immediately if it was
storage/maria/ma_rnext.c:
Check if the query was killed, and return immediately if it was
Added missing fast_ma_writeinfo(info)
storage/maria/ma_rnext_same.c:
Check if the query was killed, and return immediately if it was
Added missing fast_ma_writeinfo(info)
storage/maria/ma_rprev.c:
Check if the query was killed, and return immediately if it was
Added missing fast_ma_writeinfo(info) and ma_check_index_cond()
storage/maria/ma_search.c:
Give error message if we find a wrong key
storage/maria/ma_static.c:
Added pointer to test-if-killed function
storage/maria/maria_def.h:
New prototypes
storage/myisam/ha_myisam.cc:
Added mi_killed_in_mariadb()
Ensure that file->external_ref points to TABLE object.
storage/myisam/mi_extra.c:
Dummy test-if-killed for standalone
storage/myisam/mi_key.c:
If ma_check_index_cond() fails, set my_errno and info->lastpos
storage/myisam/mi_rkey.c:
Ensure that info->lastpos= HA_OFFSET_ERROR in case of error
Release/re-acquire locks to give queries that wait on them a chance to make progress
Check if the query was killed, and return immediately if it was
Reorder code to do less things in case of error.
Added missing fast_mi_writeinfo()
storage/myisam/mi_rnext.c:
Check if the query was killed, and return immediately if it was
Simplify old ICP code
Added missing fast_ma_writeinfo(info)
storage/myisam/mi_rnext_same.c:
Check if the query was killed, and return immediately if it was
Added missing fast_mi_writeinfo(info)
storage/myisam/mi_rprev.c:
Check if the query was killed, and return immediately if it was
Simplify error handling of ICP
Added missing fast_mi_writeinfo(info)
storage/myisam/mi_search.c:
Give error message if we find a wrong key
storage/myisam/mi_static.c:
Added pointer to test-if-killed function
storage/myisam/myisamdef.h:
New prototypes
storage/xtradb/handler/ha_innodb.cc:
Added DB_SEARCH_ABORTED_BY_USER and ha_innobase::is_thd_killed()
Check if the query was killed, and return immediately if it was
storage/xtradb/handler/ha_innodb.h:
Added prototype
storage/xtradb/include/db0err.h:
Added DB_SEARCH_ABORTED_BY_USER
storage/xtradb/include/row0mysql.h:
Added possible ICP errors
storage/xtradb/row/row0sel.c:
Use ICP errors instead of constants.
Detect if killed and return B_SEARCH_ABORTED_BY_USER
This makes the keys smaller (no row pointer) and gives us proper errors if we
use the table wrongly.
sql/sql_select.cc:
Use NO_RECORD for tables that doesn't need row data.
storage/maria/Makefile.am:
Added ma_norec.c
storage/maria/ma_check.c:
Added support for NO_RECORD record format (don't store any row data)
storage/maria/ma_norec.c:
Added support for NO_RECORD record format
storage/maria/ma_open.c:
Added support for NO_RECORD record format
storage/maria/ma_search.c:
Added support for 0 size row pointers (used with NO_RECORD)
storage/maria/ma_test1.c:
Added testing of NO_RECORD record format.
storage/maria/maria_chk.c:
Added support for NO_RECORD
storage/maria/maria_def.h:
Added support for NO_RECORD
storage/maria/unittest/ma_test_all-t:
Added testing of NO_RECORD record format
and 'THREAD_SAFE_CLIENT'.
As of MySQL 5.5, we no longer support non-threaded
builds. This patch removes all references to the
obsolete THREAD and THREAD_SAFE_CLIENT preprocessor
symbols. These were used to distinguish between
threaded and non-threaded builds.
Added locking of lock mutex when updating status in external_unlock() for Aria and MyISAM tables.
Fixed that 'source' command doesn't cause mysql command line tool to exit on error.
DEBUG_EXECUTE() and DEBUG_EVALUATE_IF() should not execute things based on wildcards. (Allows one to run --debug with mysql-test-run scripts that uses @debug)
Fixed several core dump, deadlock and crashed table bugs in handling of LOCK TABLE with MERGE tables:
- Added priority of locks to avoid crashes with MERGE tables.
- Added thr_lock_merge() to allow one to merge two results of thr_lock().
Fixed 'not found row' bug in REPLACE with Aria tables.
Mark MyISAM tables that are part of MERGE with HA_OPEN_MERGE_TABLE and set the locks to have priority THR_LOCK_MERGE_PRIV.
- By sorting MERGE tables last in thr_multi_unlock() it's safer to release and relock them many times (can happen when TRIGGERS are created)
Avoid printing (null) in debug file (to easier find out wrong NULL pointer usage with %s).
client/mysql.cc:
Fixed that 'source' command doesn't cause mysql command line tool to exit on error.
client/mysqltest.cc:
Don't send NULL to fn_format(). (Can cause crash on Solaris when using --debug)
dbug/dbug.c:
DEBUG_EXECUTE() and DEBUG_EVALUATE_IF() should not execute things based on wildcards.
include/my_base.h:
Added flag to signal if one opens a MERGE table.
Added extra() command to signal that one is not part of a MERGE table anymore.
include/thr_lock.h:
Added priority for locks (needed to fix bug in thr_lock when using MERGE tables)
Added option to thr_unlock() if get_status() should be called.
Added prototype for thr_merge_locks().
mysql-test/mysql-test-run.pl:
Ignore crashed table warnings for tables named 'crashed'.
mysql-test/r/merge.result:
Renamed triggers to make debugging easier.
Added some CHECK TABLES to catch errors earlier.
Additional tests.
mysql-test/r/merge_debug.result:
Test of error handling when reopening MERGE tables.
mysql-test/r/udf_query_cache.result:
Added missing flush status
mysql-test/suite/parts/r/partition_repair_myisam.result:
Update results
mysql-test/t/merge.test:
Renamed triggers to make debugging easier.
Added some CHECK TABLES to catch errors earlier.
Additional tests.
mysql-test/t/merge_debug.test:
Test of error handling when reopening MERGE tables.
mysql-test/t/udf_query_cache.test:
Added missing flush status
mysys/my_getopt.c:
Removed not used variable
mysys/my_symlink2.c:
Changed (null) to (NULL) to make it easier to find NULL arguments to DBUG_PRINT() functions.
(On linux, NULL to sprintf is printed 'null')
mysys/thr_lock.c:
Added priority of locks to avoid crashes with MERGE tables.
Added thr_lock_merge() to allow one to merge two results of thr_lock().
- This is needed for MyISAM as all locked table must share the same status. If not, you will not see newly inserted rows in other instances of the table.
If calling thr_unlock() with THR_UNLOCK_UPDATE_STATUS, call update_status() and restore_status() for the locks. This is needed in some rare cases where we call thr_unlock() followed by thr_lock() without calling external_unlock/external_lock in between.
Simplify loop in thr_multi_lock().
Added 'start_trans', which is called at end of thr_multi_lock() when all locks are taken.
- This was needed by Aria to ensure that transaction is started when we got all locks, not at get_status(). Without this, some rows could not be visible when we lock two tables at the same time, causing REPLACE using two tables to fail unexpectedly.
sql/handler.cc:
Add an assert() in handler::print_error() for "impossible errors" (like table is crashed) when --debug-assert-if-crashed-table is used.
sql/lock.cc:
Simplify mysql_lock_tables() code if get_lock_data() returns 0 locks.
Added new parameter to thr_multi_unlock()
In mysql_unlock_read_tables(), call first externa_unlock(), then thr_multi_unlock(); This is same order as we do in mysql_unlock_tables().
Don't abort locks in mysql_lock_abort() for merged tables when a MERGE table is deleted; Would cause a spin lock.
Added call to thr_merge_locks() in mysql_lock_merge() to ensure consistency in thr_locks().
- New locks of same type and table is stored after the old lock to ensure that we get the status from the original lock.
sql/mysql_priv.h:
Added debug_assert_if_crashed_table
sql/mysqld.cc:
Added --debug-assert-if-crashed-table
sql/parse_file.cc:
Don't print '(null)' in DBUG_PRINT of no dir given
sql/set_var.cc:
Increase default size of buffer for @debug variable.
sql/sql_base.cc:
In case of error from reopen_table() in reopen_tables(), call unlock_open_table() and restart loop.
- This fixed bug when we twice deleted same table from open_cache.
Don't take name lock for already name locked table in open_unireg_entry().
- Fixed bug when doing repair in reopen_table().
- In detach_merge_children(), always detach if 'clear_refs' is given. We can't trust parent->children_attached as this function can be called twice, first time with clear_refs set to 0.
sql/sql_class.cc:
Changed printing of (null) to "" in set_thd_proc_info()
sql/sql_parse.cc:
Added DBUG
sql/sql_trigger.cc:
Don't call unlink_open_table() if reopen_table() fails as the table may already be freed.
storage/maria/ma_bitmap.c:
Fixed DBUG_ASSERT() in allocate_tail()
storage/maria/ma_blockrec.c:
Fixed wrong calculation of row length for very small rows in undo_row_update().
- Fixes ASSERT() when doing undo.
storage/maria/ma_blockrec.h:
Added _ma_block_start_trans() and _ma_block_start_trans_no_versioning()
storage/maria/ma_locking.c:
Call _ma_update_status_with_lock() when releasing write locks.
- Fixes potential problem with updating status without the proper lock.
storage/maria/ma_open.c:
Changed to use start_trans() instead of get_status() to ensure that we see all rows in all locked tables when we got the locks.
- Fixed 'not found row' bug in REPLACE with Aria tables.
storage/maria/ma_state.c:
Added _ma_update_status_with_lock() and _ma_block_start_trans().
This is to ensure that we see all rows in all locked tables when we got the locks.
storage/maria/ma_state.h:
Added _ma_update_status_with_lock()
storage/maria/ma_write.c:
More DBUG_PRINT
storage/myisam/mi_check.c:
Fixed error message
storage/myisam/mi_extra.c:
Added HA_EXTRA_DETACH_CHILD:
- Detach MyISAM table to not be part of MERGE table (remove flag & lock priority).
storage/myisam/mi_locking.c:
Call mi_update_status_with_lock() when releasing write locks.
- Fixes potential problem with updating status without the proper lock.
Change to use new HA_OPEN_MERGE_TABLE flag to test if MERGE table.
Added mi_fix_status(), called by thr_merge().
storage/myisam/mi_open.c:
Added marker if part of MERGE table.
Call mi_fix_status() in thr_lock() for transactional tables.
storage/myisam/myisamdef.h:
Change my_once_flag to uint, as it stored different values than just 0/1
Added 'open_flag' to store state given to mi_open()
storage/myisammrg/ha_myisammrg.cc:
Add THR_LOCK_MERGE_PRIV to THR_LOCK_DATA to get MERGE locks sorted after other types of locks.
storage/myisammrg/myrg_locking.c:
Remove windows specific code.
storage/myisammrg/myrg_open.c:
Use HA_OPEN_MERGE_TABLE to mi_open().
Set HA_OPEN_MERGE_TABLE for linked MyISAM tables.
storage/xtradb/buf/buf0buf.c:
Fixed compiler warning
storage/xtradb/buf/buf0lru.c:
Initialize variable that could be used not initialized.
Speed up some PBXT tests by adding begin...commit around creating of testing tables.
include/my_base.h:
Fixed wrong constant
mysql-test/mysql-test-run.pl:
Print MariaDB instead of MySQL
mysql-test/r/range.result:
Move test that required partitions to parts.optimizer
mysql-test/suite/innodb_plugin/t/disabled.def:
Disable test that causes valgrind warning about not released memory in xtradb
mysql-test/suite/parts/r/optimizer.result:
Moved from range.result
mysql-test/suite/parts/t/optimizer.test:
Moved from range.test
mysql-test/suite/pbxt/r/join_nested.result:
Updated results after optimizer changes
mysql-test/suite/pbxt/r/renamedb.result:
Updated test for new error message
mysql-test/suite/pbxt/t/check.test:
Speed up test
mysql-test/suite/pbxt/t/count_distinct2.test:
Speed up test
mysql-test/suite/pbxt/t/derived.test:
Speed up test
mysql-test/suite/pbxt/t/renamedb.test:
Updated test for new error message
mysql-test/suite/rpl/r/rpl_log_pos.result:
Updated results
mysql-test/suite/rpl/t/rpl_log_pos.test:
Update test to read from a position that has 'known wrong' data.
The orignal test read a timestamp, so the error message could differ between runs.
mysql-test/suite/rpl/t/rpl_temporary_errors.test:
Sync to slave to make test predictable
mysql-test/t/events_time_zone.test:
Extend wait to make test predictable
mysql-test/t/range.test:
Move test that required partitions to parts.optimizer
sql/sql_list.h:
Fixed compiler warning
sql/sql_load.cc:
buffer was not freed in some error conditions
tests/mysql_client_test.c:
Fixed compiler warning
* remove handler::index_read_last()
* create handler::keyread_read_time() (was get_index_only_read_time() in opt_range.cc)
* ha_show_status() allows engine's show_status() to fail
* remove HTON_FLUSH_AFTER_RENAME
* fix key_cmp_if_same() to work for floats and doubles
* set table->status in the server, don't force engines to do it
* increment status vars in the server, don't force engines to do it
mysql-test/r/status_user.result:
correct test results - innodb was wrongly counting internal
index searches as handler_read_* calls.
sql/ha_partition.cc:
compensate for handler incrementing status counters -
we want to count only calls to underlying engines
sql/handler.h:
inline methods moved to sql_class.h
sql/key.cc:
simplify the check
sql/opt_range.cc:
move get_index_only_read_time to the handler class
sql/sp.cc:
don't use a key that's stored in the record buffer -
the engine can overwrite the buffer with anything, destroying the key
sql/sql_class.h:
inline handler methods that need to see THD and TABLE definitions
sql/sql_select.cc:
no ha_index_read_last_map anymore
sql/sql_table.cc:
remove HTON_FLUSH_AFTER_RENAME
sql/table.cc:
set HA_CAN_MEMCMP as appropriate
sql/tztime.cc:
don't use a key that's stored in the record buffer -
the engine can overwrite the buffer with anything, destroying the key
storage/myisam/ha_myisam.cc:
engines don't need to update table->status or use ha_statistic_increment anymore
storage/myisam/ha_myisam.h:
index_read_last_map is no more
Fix various mismatches between function's language linkage. Any
particular function that is declared in C++ but should be callable
from C must have C linkage. Note that function types with different
linkages are also distinct. Thus, if a function type is declared in
C code, it will have C linkage (same if declared in a extern "C"
block).
client/mysql.cc:
Mismatch between prototype and declaration.
client/mysqltest.cc:
mysqltest used to be C code. Use C linkage where appropriate.
cmd-line-utils/readline/input.c:
Isolate unreachable code.
include/my_alloc.h:
Function type must have C linkage.
include/my_base.h:
Function type must have C linkage.
include/my_global.h:
Add helper macros to avoid spurious namespace indentation.
include/mysql.h.pp:
Update ABI file.
mysys/my_gethwaddr.c:
Remove stray carriage return and fix coding style.
plugin/semisync/semisync_master_plugin.cc:
Callback function types have C linkage.
plugin/semisync/semisync_slave_plugin.cc:
Callback function types have C linkage.
sql/derror.cc:
Expected function type has C linkage.
sql/field.cc:
Use helper macro and fix indentation.
sql/handler.cc:
Expected function type has C linkage.
sql/item_sum.cc:
Correct function linkages. Remove now unnecessary cast.
sql/item_sum.h:
Add prototypes with the appropriate linkage as otherwise they
are distinct.
sql/mysqld.cc:
Wrap functions in C linkage mode.
sql/opt_range.cc:
C language linkage is ignored for class member functions.
sql/partition_info.cc:
Add wrapper functions with C linkage for class member functions.
sql/rpl_utility.h:
Use helper macro and fix indentation.
sql/sql_class.cc:
Change type of thd argument -- THD is a class.
Use helper macro and fix indentation.
sql/sql_class.h:
Change type of thd argument -- THD is a class.
sql/sql_select.cc:
Expected function type has C linkage.
sql/sql_select.h:
Move prototype to sql_test.h
sql/sql_show.cc:
Expected function type has C linkage.
sql/sql_test.cc:
Fix required function prototype and fix coding style.
sql/sql_test.h:
Removed unnecessary export and add another.
storage/myisammrg/ha_myisammrg.cc:
Expected function type has C linkage.
storage/perfschema/pfs.cc:
PSI headers are declared with C language linkage, which also
applies to function types.
Docs/sp-imp-spec.txt:
New sql_mode added.
include/my_base.h:
Flag in frm of create options.
libmysqld/CMakeLists.txt:
New files added.
libmysqld/Makefile.am:
New files added.
mysql-test/r/events_bugs.result:
New sql_mode added.
mysql-test/r/information_schema.result:
New sql_mode added.
mysql-test/r/sp.result:
New sql_mode added.
mysql-test/r/system_mysql_db.result:
New sql_mode added.
mysql-test/suite/funcs_1/r/is_columns_mysql.result:
New sql_mode added.
mysql-test/suite/funcs_1/r/is_columns_mysql_embedded.result:
New sql_mode added.
mysql-test/t/events_bugs.test:
New sql_mode added.
mysql-test/t/sp.test:
New sql_mode added.
scripts/mysql_system_tables.sql:
New sql_mode added.
scripts/mysql_system_tables_fix.sql:
New sql_mode added.
sql/CMakeLists.txt:
New files added.
sql/Makefile.am:
New files added.
sql/event_db_repository.cc:
New sql_mode added.
sql/field.cc:
Create options support added.
sql/field.h:
Create options support added.
sql/ha_partition.cc:
Create options support added.
sql/handler.cc:
Create options support added.
sql/handler.h:
Create options support added.
sql/log_event.h:
New sql_mode added.
sql/mysql_priv.h:
New sql_mode added.
sql/mysqld.cc:
New sql_mode added.
sql/share/errmsg.txt:
New error messages added.
sql/sp.cc:
New sql_mode added.
sql/sp_head.cc:
Create options support added.
sql/sql_class.cc:
Create options support added.
Debug added.
sql/sql_class.h:
Create options support added.
sql/sql_insert.cc:
my_safe_a* moved to mysqld_priv.h
sql/sql_lex.h:
Create options support added.
sql/sql_parse.cc:
Create options support added.
sql/sql_show.cc:
Create options support added.
sql/sql_table.cc:
Create options support added.
sql/sql_view.cc:
New sql_mode added.
sql/sql_yacc.yy:
Create options support added.
sql/structs.h:
Create options support added.
sql/table.cc:
Create options support added.
sql/table.h:
Create options support added.
sql/unireg.cc:
Create options support added.
storage/example/ha_example.cc:
Create options example.
storage/example/ha_example.h:
Create options example.
storage/pbxt/src/discover_xt.cc:
Create options support added.
The task is to
(a) add a comment on indexes and
(b) increase the maximum length of column, table and the new index comments.
The patch committed on behalf of Yoshinori Matsunobu (Yoshinori.Matsunobu@Sun.COM).
myisam-recover options changed from OFF to 'DEFAULT' to get less change of data loss when using MyISAM.
(The disadvantage is that changed MyISAM tables will be checked at access time; Use --myisam-recover=OFF for old behavior)
Don't call extra(HA_EXTRA_FORCE_REOPEN) in ALTER TABLE if table is locked as this will mark table as crashed!
Added assert to detect if we accidently would use MyISAM versioning in MySQL
include/my_base.h:
Mark NOT_USED as USED, as we now use this as a flag to not call extra()
mysql-test/mysql-test-run.pl:
Don't write all options when there is something wrong with the arguments
mysql-test/r/sp-destruct.result:
Add missing flush of mysql.proc (as the test copied live tables)
mysql-test/r/variables.result:
myisam-recover options changed to 'default'
mysql-test/r/view.result:
Don't show create time in result
mysql-test/suite/maria/t/maria-recovery2-master.opt:
Don't run test with myisam-recover (as this produces extra warnings during simulated death)
mysql-test/t/sp-destruct.test:
Add missing flush of mysql.proc (as the test copied live tables)
mysql-test/t/view.test:
Don't show create time in result
sql/lock.cc:
Added marker if table was deleted to argument list
sql/mysql_priv.h:
Added marker if table was deleted to argument list
sql/mysqld.cc:
myisam-recover options changed from OFF to 'DEFAULT' to get less change of data loss when using MyISAM
Allow one to specify OFF as argument to myisam-recover (was default before but one couldn't specify it)
sql/sql_base.cc:
Mark if table is going to be deleted
sql/sql_delete.cc:
Mark if table is going to be deleted
sql/sql_table.cc:
Mark if table is going to be deleted
Don't call extra(HA_EXTRA_FORCE_REOPEN) in ALTER TABLE if table is locked as this will mark table as crashed!
sql/table.cc:
Signal to handler if table is getting deleted as part of getting droped from table cache.
sql/table.h:
Added marker if table is going to be deleted.
storage/maria/ha_maria.cc:
Don't search for transaction handler if file is not transactional or outside of transaction
(Fixed possible core dump)
storage/maria/ma_blockrec.c:
Don't write changed information if table is going to be deleted.
storage/maria/ma_close.c:
Don't write changed information if table is going to be deleted.
storage/maria/ma_extra.c:
Mark tables that are deleted as crased, to ensure good behavior on restart if we suddenly crash.
storage/maria/ma_locking.c:
Cleanup
storage/maria/ma_recovery.c:
We need trnman to be inited during redo phase (to be able to open tables checked with maria_chk)
storage/maria/maria_def.h:
Added marker if table is going to be deleted.
storage/myisam/mi_close.c:
Don't write changed information if table is going to be deleted.
storage/myisam/mi_extra.c:
Mark tables that are deleted as crased, to ensure good behavior on restart if we suddenly crash.
storage/myisam/mi_open.c:
Added assert to detect if we accidently would use MyISAM versioning in MySQL
storage/myisam/myisamdef.h:
Added marker if table is going to be deleted.
Bug#16565 mysqld --help --verbose does not order variablesBug#20413 sql_slave_skip_counter is not shown in show variables
Bug#20415 Output of mysqld --help --verbose is incomplete
Bug#25430 variable not found in SELECT @@global.ft_max_word_len;
Bug#32902 plugin variables don't know their names
Bug#34599 MySQLD Option and Variable Reference need to be consistent in formatting!
Bug#34829 No default value for variable and setting default does not raise error
Bug#34834 ? Is accepted as a valid sql mode
Bug#34878 Few variables have default value according to documentation but error occurs
Bug#34883 ft_boolean_syntax cant be assigned from user variable to global var.
Bug#37187 `INFORMATION_SCHEMA`.`GLOBAL_VARIABLES`: inconsistent status
Bug#40988 log_output_basic.test succeeded though syntactically false.
Bug#41010 enum-style command-line options are not honoured (maria.maria-recover fails)
Bug#42103 Setting key_buffer_size to a negative value may lead to very large allocations
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
Bug#44797 plugins w/o command-line options have no disabling option in --help
Bug#46314 string system variables don't support expressions
Bug#46470 sys_vars.max_binlog_cache_size_basic_32 is broken
Bug#46586 When using the plugin interface the type "set" for options caused a crash.
Bug#47212 Crash in DBUG_PRINT in mysqltest.cc when trying to print octal number
Bug#48758 mysqltest crashes on sys_vars.collation_server_basic in gcov builds
Bug#49417 some complaints about mysqld --help --verbose output
Bug#49540 DEFAULT value of binlog_format isn't the default value
Bug#49640 ambiguous option '--skip-skip-myisam' (double skip prefix)
Bug#49644 init_connect and \0
Bug#49645 init_slave and multi-byte characters
Bug#49646 mysql --show-warnings crashes when server dies
CMakeLists.txt:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
client/mysql.cc:
don't crash with --show-warnings when mysqld dies
config/ac-macros/plugins.m4:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
include/my_getopt.h:
comments
include/my_pthread.h:
fix double #define
mysql-test/mysql-test-run.pl:
run sys_vars suite by default
properly recognize envirinment variables (e.g. MTR_MAX_SAVE_CORE) set to 0
escape gdb command line arguments
mysql-test/suite/sys_vars/r/rpl_init_slave_func.result:
init_slave+utf8 bug
mysql-test/suite/sys_vars/t/rpl_init_slave_func.test:
init_slave+utf8 bug
mysys/my_getopt.c:
Bug#34599 MySQLD Option and Variable Reference need to be consistent in formatting!
Bug#46586 When using the plugin interface the type "set" for options caused a crash.
Bug#49640 ambiguous option '--skip-skip-myisam' (double skip prefix)
mysys/typelib.c:
support for flagset
sql/ha_ndbcluster.cc:
backport from telco tree
sql/item_func.cc:
Bug#49644 init_connect and \0
Bug#49645 init_slave and multi-byte characters
sql/sql_builtin.cc.in:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
sql/sql_plugin.cc:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
Bug#32902 plugin variables don't know their names
Bug#44797 plugins w/o command-line options have no disabling option in --help
sql/sys_vars.cc:
all server variables are defined here
storage/myisam/ft_parser.c:
remove unnecessary updates of param->quot
storage/myisam/ha_myisam.cc:
myisam_* variables belong here
strings/my_vsnprintf.c:
%o and %llx
unittest/mysys/my_vsnprintf-t.c:
%o and %llx tests
vio/viosocket.c:
bugfix: fix @@wait_timeout to work with socket timeouts (vs. alarm thread)
----------------------------------------------------------
revno: 2630.4.38
committer: Konstantin Osipov <konstantin@mysql.com>
branch nick: mysql-6.0-4144
timestamp: Wed 2008-06-25 22:07:06 +0400
message:
WL#4144 - Lock MERGE engine children.
Committing a version of the patch merged with WL#3726
on behalf of Ingo.
Step #1: Move locking from parent to children.
MERGE children are now left in the query list of tables
after inserted there in open_tables(). So they are locked
by lock_tables() as all other tables are.
The MERGE parent does not store locks any more. It appears
in a MYSQL_LOCK with zero lock data. This is kind of a "dummy"
lock.
All other lock handling is also done directly on the children.
To protect against parent or child modifications during LOCK
TABLES, the children are detached after every statement and
attached before every statement, even under LOCK TABLES.
The children table list is removed from the query list of tables
on every detach and on close of the parent.
Step #2: Move MERGE specific functionality from SQL layer
into table handler.
Functionality moved from SQL layer (mainly sql_base.cc)
to the table handler (ha_myisammrg.cc).
Unnecessary code is removed from the SQL layer.
Step #3: Moved all MERGE specific members from TABLE
to ha_myisammrg.
Moved members from TABLE to ha_myisammrg.
Renamed some mebers.
Fixed comments.
Step #4: Valgrind and coverage testing
Valgrind did not uncover new problems.
Added purecov comments.
Added a new test for DATA/INDEX DIRECTORY options.
Changed handling of ::reset() for non-attached children.
Fixed the merge-big test.
Step #5: Fixed crashes detected during review
Changed detection when to attach/detach.
Added new tests.
Backport also the fix for Bug#44040 "MySQL allows creating a
MERGE table upon VIEWs but crashes when using it"
include/my_base.h:
WL#4144 - Lock MERGE engine children
Added HA_EXTRA_ADD_CHILDREN_LIST and HA_EXTRA_IS_ATTACHED_CHILDREN
for MERGE table support
mysql-test/r/merge.result:
WL#4144 - Lock MERGE engine children
Fixed test result.
mysql-test/t/disabled.def:
Enable merge.test, which now is working again (WL#4144).
mysql-test/t/merge-big.test:
Fix the messages for wait_condition (merge with WL#3726).
mysql-test/t/merge.test:
WL#4144 - Lock MERGE engine children
Fixed one test to meet coding standards for tests
(upper case keywords, engine names as in SHOW ENGINES).
Fixed error codes.
Added a test for DATA/INDEX DIRECTORY.
mysys/thr_lock.c:
WL#4144 - Lock MERGE engine children
Added purecov comments.
sql/ha_partition.cc:
WL#4144 - Lock MERGE engine children
Added MERGE specific extra operations to ha_partition::extra().
Extended comments.
Changed function comment to doxygen style.
Fixed nomenclature: 'parameter' -> 'operation'.
sql/mysql_priv.h:
WL#4144 - Lock MERGE engine children
Removed declarations for removed functions.
sql/sql_base.cc:
WL#4144 - Lock MERGE engine children
Leave the children in the query list of tables after open_tables().
Set proper back links (prev_global).
Attach MERGE children before and detach them after every
statement. Even under LOCK TABLES.
Remove children from the query list when they are detached.
Remove lock forwarding from children to parent.
Moved MERGE specific functions to ha_myisammrg.cc.
Added purecov comments.
Backport the fix for Bug#44040 "MySQL allows creating a MERGE table upon VIEWs but crashes when using it"
sql/sql_table.cc:
WL#4144 - Lock MERGE engine children
Changed detection of MERGE tables.
sql/table.cc:
WL#4144 - Lock MERGE engine children
Moved is_children_attached() method from TABLE to ha_myisammrg.
sql/table.h:
WL#4144 - Lock MERGE engine children
Moved all MERGE specific members from TABLE to ha_myisammrg.
storage/myisammrg/ha_myisammrg.cc:
WL#4144 - Lock MERGE engine children
Set proper back links in the child list (prev_global).
Added a function for removal of the child list from the query list.
Remove children from the query list when the parent is closed.
Make parent lock handling a dummy (zero locks).
Moved MERGE specific functionality from SQL layer to here.
Moved all MERGE specific members from TABLE to ha_myisammrg.
Renamed children list pointers.
Added initialization and free for the children list mem_root.
Fixed comments.
Added purecov comments.
storage/myisammrg/ha_myisammrg.h:
WL#4144 - Lock MERGE engine children
Added method add_children_list().
Moved all MERGE specific members from TABLE to ha_myisammrg.
Renamed children list pointers.
Added a mem_root for the children list.
storage/myisammrg/myrg_extra.c:
WL#4144 - Lock MERGE engine children
Changed handling of ::reset() for non-attached children.
* Finished Monty and Jani's merge
* Some InnoDB tests still fail (because it's old xtradb code run against
newer testsuite). They are expected to go after mergning with the latest
xtradb.
it returns misleading 'table is full'
Innodb returns a misleading error message "table is full"
when the number of active concurrent transactions is greater
than 1024.
Fixed by adding errorcode "ER_TOO_MANY_CONCURRENT_TRXS" to the
error codes. Innodb should return HA_TOO_MANY_CONCURRENT_TRXS
to mysql which is then mapped to ER_TOO_MANY_CONCURRENT_TRXS
Note: testcase is not written as this was reproducible only by
changing innodb code.
extra/perror.c:
Add error number and message for HA_ERR_TOO_MANY_CONCURRENT_TRXS
include/my_base.h:
Add error number and message for HA_ERR_TOO_MANY_CONCURRENT_TRXS
sql/ha_innodb.cc:
Return HA_ERR_TOO_MANY_CONCURRENT_TRXS to mysql server
sql/handler.cc:
Add error number and message for HA_ERR_TOO_MANY_CONCURRENT_TRXS
sql/share/errmsg.txt:
Add error message for ER_TOO_MANY_CONCURRENT_TRXS
Add all HA error numbers and descriptions to perror.
Add reminder to header.
This is already fixed in smarter ways in future codebases, and this
codebase is unlikely to change, since new development is forbidden
here.
- The problem was that we didn't inform the handler that we are going to close tables that are locked and may have (at least in Maria) be part of an active transaction.
Fix for Bug#39227 Maria: crash with ALTER TABLE PARTITION
Fix for Bug #39987 main.partition_not_windows fails under debug build
Fixed some compiler errors & warnings found by pushbuild
include/my_base.h:
Added HA_EXTRA_PREPARE_FOR_FORCED_CLOSE for signaling the handler that the file will be forced closed
include/my_global.h:
Removed 'register' from 'swap_variables' as this gives a warnings when the variables are structs. Compilers should also now be smart enough to figure out this themselves
mysql-test/r/subselect_debug.result:
Reset value of the debug variable; Without setting this the subselect_innodb test will fail when run after this one
mysql-test/suite/maria/r/maria.result:
Merged test with myisam.test
Added tests for new fixed bugs
mysql-test/suite/maria/t/maria.test:
Merged test with myisam.test
Added tests for new fixed bugs
mysql-test/t/subselect_debug.test:
Reset value of the debug variable; Without setting this the subselect_innodb test will fail when run after this one
mysys/my_uuid.c:
Fixed compiler error on windows
sql/ha_partition.cc:
Added support for the new extra flag: HA_EXTRA_PREPARE_FOR_FORCED_CLOSE (Bug #39226)
Ensure that we call extra() for HA_EXTRA_PREPARE_FOR_DROP (Bug#39227)
sql/mysqld.cc:
Fix for Bug #39987 main.partition_not_windows fails under debug build
The problem was that when compiling for purify/valgrind realpath() is not used, which causes test_if_data_home_dir to fail when it shouldn't
sql/sql_base.cc:
Call HA_EXTRA_PREPARE_FOR_FORCED_CLOSE for tables that are locked but we are going to force close without doing a commit
sql/sql_parse.cc:
More DBUG_PRINT. Fixed comments
storage/maria/ma_extra.c:
If HA_EXTRA_PREPARE_FOR_FORCED_CLOSE is called and the table is part of a transaction, remove the table from beeing part of a transaction.
This is safe as this is only used as part of flush tables or when the table is not part of a transaction
storage/myisam/mi_open.c:
Indentation fix
unittest/mysys/waiting_threads-t.c:
Remove not needed 'volatile' to get rid of compiler warnings on windows
