The problem was that when using clang + asan, we do not get a correct value
for the thread stack as some local variables are not allocated at the
normal stack.
It looks like that for example clang 18.1.3, when compiling with
-O2 -fsanitize=addressan it puts local variables and things allocated by
alloca() in other areas than on the stack.
The following code shows the issue
Thread 6 "mariadbd" hit Breakpoint 3, do_handle_one_connection
(connect=0x5080000027b8,
put_in_cache=<optimized out>) at sql/sql_connect.cc:1399
THD *thd;
1399 thd->thread_stack= (char*) &thd;
(gdb) p &thd
(THD **) 0x7fffedee7060
(gdb) p $sp
(void *) 0x7fffef4e7bc0
The address of thd is 24M away from the stack pointer
(gdb) info reg
...
rsp 0x7fffef4e7bc0 0x7fffef4e7bc0
...
r13 0x7fffedee7060 140737185214560
r13 is pointing to the address of the thd. Probably some kind of
"local stack" used by the sanitizer
I have verified this with gdb on a recursive call that calls alloca()
in a loop. In this case all objects was stored in a local heap,
not on the stack.
To solve this issue in a portable way, I have added two functions:
my_get_stack_pointer() returns the address of the current stack pointer.
The code is using asm instructions for intel 32/64 bit, powerpc,
arm 32/64 bit and sparc 32/64 bit.
Supported compilers are gcc, clang and MSVC.
For MSVC 64 bit we are using _AddressOfReturnAddress()
As a fallback for other compilers/arch we use the address of a local
variable.
my_get_stack_bounds() that will return the address of the base stack
and stack size using pthread_attr_getstack() or NtCurrentTed() with
fallback to using the address of a local variable and user provided
stack size.
Server changes are:
- Moving setting of thread_stack to THD::store_globals() using
my_get_stack_bounds().
- Removing setting of thd->thread_stack, except in functions that
allocates a lot on the stack before calling store_globals(). When
using estimates for stack start, we reduce stack_size with
MY_STACK_SAFE_MARGIN (8192) to take into account the stack used
before calling store_globals().
I also added a unittest, stack_allocation-t, to verify the new code.
Reviewed-by: Sergei Golubchik <serg@mariadb.org>
Some fixes related to commit f838b2d799 and
Rows_log_event::do_apply_event() and Update_rows_log_event::do_exec_row()
for system-versioned tables were provided by Nikita Malyavin.
This was required by test versioning.rpl,trx_id,row.
Warnings are added to net_server.cc when
global_system_variables.log_warnings >= 4.
When the above condition holds then:
- All communication errors from net_serv.cc is also written to the
error log.
- In case of a of not being able to read or write a packet, a more
detailed error is given.
Other things:
- Added detection of slaves that has hangup to Ack_receiver::run()
- vio_close() is now first marking the socket closed before closing it.
The reason for this is to ensure that the connection that gets a read
error can check if the reason was that the socket was closed.
- Add a new state to vio to be able to detect if vio is acive, shutdown or
closed. This is used to detect if socket is closed by another thread.
- Testing of the new warnings is done in rpl_get_lock.test
- Suppress some of the new warnings in mtr to allow one to run some of
the tests with -mysqld=--log-warnings=4. All test in the 'rpl' suite
can now be run with this option.
- Ensure that global.log_warnings are restored at test end in a way
that allows one to use mtr --mysqld=--log-warnings=4.
Reviewed-by: <serg@mariadb.org>,<brandon.nesterenko@mariadb.com>
rpl_semi_sync_slave_enabled_consistent.test and the first part of
the commit message comes from Brandon Nesterenko.
A test to show how to induce the "Read semi-sync reply magic number
error" message on a primary. In short, if semi-sync is turned on
during the hand-shake process between a primary and replica, but
later a user negates the rpl_semi_sync_slave_enabled variable while
the replica's IO thread is running; if the io thread exits, the
replica can skip a necessary call to kill_connection() in
repl_semisync_slave.slave_stop() due to its reliance on a global
variable. Then, the replica will send a COM_QUIT packet to the
primary on an active semi-sync connection, causing the magic number
error.
The test in this patch exits the IO thread by forcing an error;
though note a call to STOP SLAVE could also do this, but it ends up
needing more synchronization. That is, the STOP SLAVE command also
tries to kill the VIO of the replica, which makes a race with the IO
thread to try and send the COM_QUIT before this happens (which would
need more debug_sync to get around). See THD::awake_no_mutex for
details as to the killing of the replica’s vio.
Notes:
- The MariaDB documentation does not make it clear that when one
enables semi-sync replication it does not matter if one enables
it first in the master or slave. Any order works.
Changes done:
- The rpl_semi_sync_slave_enabled variable is now a default value for
when semisync is started. The variable does not anymore affect
semisync if it is already running. This fixes the original reported
bug. Internally we now use repl_semisync_slave.get_slave_enabled()
instead of rpl_semi_sync_slave_enabled. To check if semisync is
active on should check the @@rpl_semi_sync_slave_status variable (as
before).
- The semisync protocol conflicts in the way that the original
MySQL/MariaDB client-server protocol was designed (client-server
send and reply packets are strictly ordered and includes a packet
number to allow one to check if a packet is lost). When using
semi-sync the master and slave can send packets at 'any time', so
packet numbering does not work. The 'solution' has been that each
communication starts with packet number 1, but in some cases there
is still a chance that the packet number check can fail. Fixed by
adding a flag (pkt_nr_can_be_reset) in the NET struct that one can
use to signal that packet number checking should not be done. This
is flag is set when semi-sync is used.
- Added Master_info::semi_sync_reply_enabled to allow one to configure
some slaves with semisync and other other slaves without semisync.
Removed global variable semi_sync_need_reply that would not work
with multi-master.
- Repl_semi_sync_master::report_reply_packet() can now recognize
the COM_QUIT packet from semisync slave and not give a
"Read semi-sync reply magic number error" error for this case.
The slave will be removed from the Ack listener.
- On Windows, don't stop semisync Ack listener just because one
slave connection is using socket_id > FD_SETSIZE.
- Removed busy loop in Ack_receiver::run() by using
"Self-pipe trick" to signal new slave and stop Ack_receiver.
- Changed some Repl_semi_sync_slave functions that always returns 0
from int to void.
- Added Repl_semi_sync_slave::slave_reconnect().
- Removed dummy_function Repl_semi_sync_slave::reset_slave().
- Removed some duplicate semisync notes from the error log.
- Add test of "if (get_slave_enabled() && semi_sync_need_reply)"
before calling Repl_semi_sync_slave::slave_reply().
(Speeds up the code as we can skip all initializations).
- If epl_semisync_slave.slave_reply() fails, we disable semisync
for that connection.
- We do not call semisync.switch_off() if there are no active slaves.
Instead we check in Repl_semi_sync_master::commit_trx() if there are
no active threads. This simplices the code.
- Changed assert() to DBUG_ASSERT() to ensure that the DBUG log is
flushed in case of asserts.
- Removed the internal rpl_semi_sync_slave_status as it is not needed
anymore. The @@rpl_semi_sync_slave_status status variable is now
mapped to rpl_semi_sync_enabled.
- Removed rpl_semi_sync_slave_enabled as it is not needed anymore.
Repl_semi_sync_slave::get_slave_enabled() contains the active status.
- Added checking that we do not add a slave twice with
Ack_receiver::add_slave(). This could happen with old code.
- Removed Repl_semi_sync_master::check_and_switch() as it is not
needed anymore.
- Ensure that when we call Ack_receiver::remove_slave() that the slave
is removed from the listener before function returns.
- Call listener.listen_on_sockets() outside of mutex for better
performance and less contested mutex.
- Ensure that listening is ignoring newly added slaves when checking for
responses.
- Fixed the master ack_receiver listener is not killed if there are no
connected slaves (and thus stop semisync handling of future
connections). This could happen if all slaves sockets where would be
marked as unreliable.
- Added unlink() to base_ilist_iterator and remove() to
I_List_iterator. This enables us to remove 'dead' slaves in
Ack_recever::run().
- kill_zombie_dump_threads() now does killing of dump threads properly.
- It can now kill several threads (should be impossible but could
happen if IO slaves reconnects very fast).
- We now wait until the dump thread is done before starting the
dump.
- Added an error if kill_zombie_dump_threads() fails.
- Set thd->variables.server_id before calling
kill_zombie_dump_threads(). This simplies the code.
- Added a lot of comments both in code and tests.
- Removed DBUG_EVALUATE_IF "failed_slave_start" as it is not used.
Test changes:
- rpl.rpl_session_var2 added which runs rpl.rpl_session_var test with
semisync enabled.
- Some timings changed slight with startup of slave which caused
rpl_binlog_dump_slave_gtid_state_info.text to fail as it checked the
error log file before the slave had started properly. Fixed by
adding wait_for_pattern_in_file.inc that allows waiting for the
pattern to appear in the log file.
- Tests have been updated so that we first set
rpl_semi_sync_master_enabled on the master and then set
rpl_semi_sync_slave_enabled on the slaves (this is according to how
the MariaDB documentation document how to setup semi-sync).
- Error text "Master server does not have semi-sync enabled" has been
replaced with "Master server does not support semi-sync" for the
case when the master supports semi-sync but semi-sync is not
enabled.
Other things:
- Some trivial cleanups in Repl_semi_sync_master::update_sync_header().
- We should in 11.3 changed the default value for
rpl-semi-sync-master-wait-no-slave from TRUE to FALSE as the TRUE
does not make much sense as default. The main difference with using
FALSE is that we do not wait for semisync Ack if there are no slave
threads. In the case of TRUE we wait once, which did not bring any
notable benefits except slower startup of master configured for
using semisync.
Co-author: Brandon Nesterenko <brandon.nesterenko@mariadb.com>
This solves the problem reported in MDEV-32960 where a new
slave may not be registered in time and the master disables
semi sync because of that.
Semisync ack (master side) receiver thread is made to report
details of faced errors.
In case of 'magic byte' error, a hexdump of the received packet
is always (level) NOTEd into the error log.
In other cases an exact server level error is print out
as a warning (as it may not be critical) under log_warnings > 2.
An MTR test added for the magic byte error. For others existing mtr
tests cover that, provided log_warnings > 2 is set.
Dead code cleanup:
part_info->num_parts usage was wrong and working incorrectly in
mysql_drop_partitions() because num_parts is already updated in
prep_alter_part_table(). We don't have to update part_info->partitions
because part_info is destroyed at alter_partition_lock_handling().
Cleanups:
- DBUG_EVALUATE_IF() macro replaced by shorter form DBUG_IF();
- Typo in ER_KEY_COLUMN_DOES_NOT_EXITS.
Refactorings:
- Splitted write_log_replace_delete_frm() into write_log_delete_frm()
and write_log_replace_frm();
- partition_info via DDL_LOG_STATE;
- set_part_info_exec_log_entry() removed.
DBUG_EVALUATE removed
DBUG_EVALUTATE was only added for consistency together with
DBUG_EVALUATE_IF. It is not used anywhere in the code.
DBUG_SUICIDE() fix on release build
On release DBUG_SUICIDE() was statement. It was wrong as
DBUG_SUICIDE() is used in expression context.
Back port upstream fix
commit 1800b015a1d487330f7b15f2020b887be348a66b
Author: Venkatesh Duggirala <venkatesh.duggirala@oracle.com>
Date: Fri Sep 8 20:29:22 2017 +0530
Bug#26027024 SLAVE_COMPRESSED_PROTOCOL DOESN'T WORK WITH
SEMI-SYNC REPLICATION IN MYSQL-5.7
Analysis: In mysql-5.6, dump thread (the thread that is created
on Master after Slave requested for a binlog dump) is also used
to receive acknowledgements from the Slave and act on them accordingly.
For performance reasons, a special thread called Ack Receiver thread
is added in mysql-5.7 Semi synchronous replication plugin.
This thread does not have special handling to receive acknowledgements
if Slave has enabled compression in the protocol. Hence Master is
unable to handle any slave if Slave_compressed_protocol is enabled
on it.
Fix: Enable compress flag on the communication channels if the Slave
has Slave_compressed_protocol ON.
Originally introduced by e972125f1 to avoid harmless wait for
LOCK_global_system_variables in a newly created thread, which creation was
initiated by system variable update.
At the same time it opens dangerous hole, when system variable update
thread already released LOCK_global_system_variables and ack_receiver
thread haven't yet completed new THD construction. In this case THD
constructor goes completely unprotected.
Since ack_receiver.stop() waits for the thread to go down, we have to
temporarily release LOCK_global_system_variables so that it doesn't
deadlock with ack_receiver.run(). Unfortunately it breaks atomicity
of rpl_semi_sync_master_enabled updates and makes them not serialized.
LOCK_rpl_semi_sync_master_enabled was introduced to workaround the above.
TODO: move ack_receiver start/stop into repl_semisync_master
enable_master/disable_master under LOCK_binlog protection?
Part of MDEV-14984 - regression in connect performance
In contrast to thread_count, which is decremented by THD destructor,
this one was most probably intended to be decremented after all THD
destructors are done.
THD_count class was added to achieve similar effect with thread_count.
Aim is to reduce usage of LOCK_thread_count and COND_thread_count.
Part of MDEV-15135.
The semisync ack collector hits fd's out-of-bound value assert through
a stack of
/usr/sbin/mysqld(_ZN12Ack_receiver17get_slave_socketsEP6fd_setPj+0x70)[0x7fa3bbe27400]
/usr/sbin/mysqld(_ZN12Ack_receiver3runEv+0x540)[0x7fa3bbe27980]
/usr/sbin/mysqld(ack_receive_handler+0x19)[0x7fa3bbe27a79]
The reason of the failure must be the same as in https://bugs.mysql.com/bug.php?id=79865
whose fixes are applied with minor changes.
Specifically, the semisync ack thread is changed to use poll()
instead of select() on platforms where the former is defined.
On the systems that still use select(), Ack receive thread will generate
an error and semi sync will be switched off. Windows systems is exception
case because on windows this limitation does not exists.
The sustain manual testing with `mysqlslap --concurrency > 1024' in "background" while the slave io thread is restarting multiple times.
Handle string length as size_t, consistently (almost always:))
Change function prototypes to accept size_t, where in the past
ulong or uint were used. change local/member variables to size_t
when appropriate.
This fix excludes rocksdb, spider,spider, sphinx and connect for now.
and specifically the ack receiving functionality.
Semisync is turned to be static instead of plugin so its functions
are invoked at the same points as RUN_HOOKS.
The RUN_HOOKS and the observer interface remain to be removed by later
patch.
Todo:
React on killed status by repl_semisync_master.wait_after_sync(). Currently
Repl_semi_sync_master::commit_trx does not check the killed status.
There were few bugfixes found that are present in mysql and its unclear
whether/how they are covered. Those include:
Bug#15985893: GTID SKIPPED EVENTS ON MASTER CAUSE SEMI SYNC TIME-OUTS
Bug#17932935 CALLING IS_SEMI_SYNC_SLAVE() IN EACH FUNCTION CALL
HAS BAD PERFORMANCE
Bug#20574628: SEMI-SYNC REPLICATION PERFORMANCE DEGRADES WITH A HIGH NUMBER OF THREADS
