Create a MY_WARNING_FLAGS_NON_FATAL for testing warnings
Add -Weffc++ as no-error espect, disabling from rocksdb due
to excessive errors that will be corrected later.
into a separate transaction_participant structure
handlerton inherits it, so handlerton itself doesn't change.
but entities that only need to participate in a transaction,
like binlog or online alter log, use a transaction_participant
and no longer need to pretend to be a full-blown but invisible
storage engine which doesn't support create table.
the information about index algorithm was stored in two
places inconsistently split between both.
BTREE index could have key->algorithm == HA_KEY_ALG_BTREE, if the user
explicitly specified USING BTREE or HA_KEY_ALG_UNDEF, if not.
RTREE index had key->algorithm == HA_KEY_ALG_RTREE
and always had key->flags & HA_SPATIAL
FULLTEXT index had key->algorithm == HA_KEY_ALG_FULLTEXT
and always had key->flags & HA_FULLTEXT
HASH index had key->algorithm == HA_KEY_ALG_HASH or HA_KEY_ALG_UNDEF
long unique index always had key->algorithm == HA_KEY_ALG_LONG_HASH
In this commit:
All indexes except BTREE and HASH always have key->algorithm
set, HA_SPATIAL and HA_FULLTEXT flags are not used anymore (except
for storage to keep frms backward compatible).
As a side effect ALTER TABLE now detects FULLTEXT index renames correctly
Step#1: fixing the return type of strnxfrm() from size_t to this structure:
typedef struct
{
size_t m_output_length;
size_t m_source_length_used;
uint m_warnings;
} my_strnxfrm_ret_t;
Updated tests: cases with bugs or which cannot be run
with the cursor-protocol were excluded with
"--disable_cursor_protocol"/"--enable_cursor_protocol"
Fix for v.10.5
Columns added to TABLE_STATISTICS
- ROWS_INSERTED, ROWS_DELETED, ROWS_UPDATED, KEY_READ_HITS and
KEY_READ_MISSES.
Columns added to CLIENT_STATISTICS and USER_STATISTICS:
- KEY_READ_HITS and KEY_READ_MISSES.
User visible changes (except new columns):
- CLIENT_STATISTICS and USER_STATISTICS has columns KEY_READ_HITS and
KEY_READ_MISSES added after column ROWS_UPDATED before SELECT_COMMANDS.
Other changes:
- Do not collect table statistics for system tables like index_stats
table_stats, performance_schema, information_schema etc as the user
has no control of these and the generate noice in the statistics.
- All row variables that are part of user_stats are moved to
'struct rows_stats' to make it easy to clear all of them at once.
- ha_read_key_misses added to STATUS_VAR
Notes:
- userstat.result has a change of numbers of rows for handler_read_key.
This is because use-stat-tables is now disabled for the test.
Two new variables added:
- max_tmp_space_usage : Limits the the temporary space allowance per user
- max_total_tmp_space_usage: Limits the temporary space allowance for
all users.
New status variables: tmp_space_used & max_tmp_space_used
New field in information_schema.process_list: TMP_SPACE_USED
The temporary space is counted for:
- All SQL level temporary files. This includes files for filesort,
transaction temporary space, analyze, binlog_stmt_cache etc.
It does not include engine internal temporary files used for repair,
alter table, index pre sorting etc.
- All internal on disk temporary tables created as part of resolving a
SELECT, multi-source update etc.
Special cases:
- When doing a commit, the last flush of the binlog_stmt_cache
will not cause an error even if the temporary space limit is exceeded.
This is to avoid giving errors on commit. This means that a user
can temporary go over the limit with up to binlog_stmt_cache_size.
Noteworthy issue:
- One has to be careful when using small values for max_tmp_space_limit
together with binary logging and with non transactional tables.
If a the binary log entry for the query is bigger than
binlog_stmt_cache_size and one hits the limit of max_tmp_space_limit
when flushing the entry to disk, the query will abort and the
binary log will not contain the last changes to the table.
This will also stop the slave!
This is also true for all Aria tables as Aria cannot do rollback
(except in case of crashes)!
One way to avoid it is to use @@binlog_format=statement for
queries that updates a lot of rows.
Implementation:
- All writes to temporary files or internal temporary tables, that
increases the file size, are routed through temp_file_size_cb_func()
which updates and checks the temp space usage.
- Most of the temporary file monitoring is done inside IO_CACHE.
Temporary file monitoring is done inside the Aria engine.
- MY_TRACK and MY_TRACK_WITH_LIMIT are new flags for ini_io_cache().
MY_TRACK means that we track the file usage. TRACK_WITH_LIMIT means
that we track the file usage and we give an error if the limit is
breached. This is used to not give an error on commit when
binlog_stmp_cache is flushed.
- global_tmp_space_used contains the total tmp space used so far.
This is needed quickly check against max_total_tmp_space_usage.
- Temporary space errors are using EE_LOCAL_TMP_SPACE_FULL and
handler errors are using HA_ERR_LOCAL_TMP_SPACE_FULL.
This is needed until we move general errors to it's own error space
so that they cannot conflict with system error numbers.
- Return value of my_chsize() and mysql_file_chsize() has changed
so that -1 is returned in the case my_chsize() could not decrease
the file size (very unlikely and will not happen on modern systems).
All calls to _chsize() are updated to check for > 0 as the error
condition.
- At the destruction of THD we check that THD::tmp_file_space == 0
- At server end we check that global_tmp_space_used == 0
- As a precaution against errors in the tmp_space_used code, one can set
max_tmp_space_usage and max_total_tmp_space_usage to 0 to disable
the tmp space quota errors.
- truncate_io_cache() function added.
- Aria tables using static or dynamic row length are registered in 8K
increments to avoid some calls to update_tmp_file_size().
Other things:
- Ensure that all handler errors are registered. Before, some engine
errors could be printed as "Unknown error".
- Fixed bug in filesort() that causes a assert if there was an error
when writing to the temporay file.
- Fixed that compute_window_func() now takes into account write errors.
- In case of parallel replication, rpl_group_info::cleanup_context()
could call trans_rollback() with thd->error set, which would cause
an assert. Fixed by resetting the error before calling trans_rollback().
- Fixed bug in subselect3.inc which caused following test to use
heap tables with low value for max_heap_table_size
- Fixed bug in sql_expression_cache where it did not overflow
heap table to Aria table.
- Added Max_tmp_disk_space_used to slow query log.
- Fixed some bugs in log_slow_innodb.test
- FLUSH GLOBAL STATUS now resets most global_status_vars.
At this stage, this is mainly to be used for testing.
- FLUSH SESSION STATUS added as an alias for FLUSH STATUS.
- FLUSH STATUS does not require any privilege (before required RELOAD).
- FLUSH GLOBAL STATUS requires RELOAD privilege.
- All global status reset moved to FLUSH GLOBAL STATUS.
- Replication semisync status variables are now reset by
FLUSH GLOBAL STATUS.
- In test cases, the only changes are:
- Replace FLUSH STATUS with FLUSH GLOBAL STATUS
- Replace FLUSH STATUS with FLUSH STATUS; FLUSH GLOBAL STATUS.
This was only done in a few tests where the test was using SHOW STATUS
for both local and global variables.
- Uptime_since_flush_status is now always provided, independent if
ENABLED_PROFILING is enabled when compiling MariaDB.
- @@global.Uptime_since_flush_status is reset on FLUSH GLOBAL STATUS
and @@session.Uptime_since_flush_status is reset on FLUSH SESSION STATUS.
- When connected, @@session.Uptime_since_flush_status is set to 0.
This task is to ensure we have a clear definition and rules of how to
repair or optimize a table.
The rules are:
- REPAIR should be used with tables that are crashed and are
unreadable (hardware issues with not readable blocks, blocks with
'unexpected data' etc)
- OPTIMIZE table should be used to optimize the storage layout for the
table (recover space for delete rows and optimize the index
structure.
- ALTER TABLE table_name FORCE should be used to rebuild the .frm file
(the table definition) and the table (with the original table row
format). If the table is from and older MariaDB/MySQL release with a
different storage format, it will convert the data to the new
format. ALTER TABLE ... FORCE is used as part of mariadb-upgrade
Here follows some more background:
The 3 ways to repair a table are:
1) ALTER TABLE table_name FORCE" (not other options).
As an alias we allow: "ALTER TABLE table_name ENGINE=original_engine"
2) "REPAIR TABLE" (without FORCE)
3) "OPTIMIZE TABLE"
All of the above commands will optimize row space usage (which means that
space will be needed to hold a temporary copy of the table) and
re-generate all indexes. They will also try to replicate the original
table definition as exact as possible.
For ALTER TABLE and "REPAIR TABLE without FORCE", the following will hold:
If the table is from an older MariaDB version and data conversion is
needed (for example for old type HASH columns, MySQL JSON type or new
TIMESTAMP format) "ALTER TABLE table_name FORCE, algorithm=COPY" will be
used.
The differences between the algorithms are
1) Will use the fastest algorithm the engine supports to do a full repair
of the table (except if data conversions are is needed).
2) Will use the storage engine internal REPAIR facility (MyISAM, Aria).
If the engine does not support REPAIR then
"ALTER TABLE FORCE, ALGORITHM=COPY" will be used.
If there was data incompatibilities (which means that FORCE was used)
then there will be a warning after REPAIR that ALTER TABLE FORCE is
still needed.
The reason for this is that REPAIR may be able to go around data
errors (wrong incompatible data, crashed or unreadable sectors) that
ALTER TABLE cannot do.
3) Will use the storage engine internal OPTIMIZE. If engine does not
support optimize, then "ALTER TABLE FORCE" is used.
The above will ensure that ALTER TABLE FORCE is able to
correct almost any errors in the row or index data. In case of
corrupted blocks then REPAIR possible followed by ALTER TABLE is needed.
This is important as mariadb-upgrade executes ALTER TABLE table_name
FORCE for any table that must be re-created.
Bugs fixed with InnoDB tables when using ALTER TABLE FORCE:
- No error for INNODB_DEFAULT_ROW_FORMAT=COMPACT even if row length
would be too wide. (Independent of innodb_strict_mode).
- Tables using symlinks will be symlinked after any of the above commands
(Independent of the setting of --symbolic-links)
If one specifies an algorithm together with ALTER TABLE FORCE, things
will work as before (except if data conversion is required as then
the COPY algorithm is enforced).
ALTER TABLE .. OPTIMIZE ALL PARTITIONS will work as before.
Other things:
- FORCE argument added to REPAIR to allow one to first run internal
repair to fix damaged blocks and then follow it with ALTER TABLE.
- REPAIR will not update frm_version if ha_check_for_upgrade() finds
that table is still incompatible with current version. In this case the
REPAIR will end with an error.
- REPAIR for storage engines that does not have native repair, like InnoDB,
is now using ALTER TABLE FORCE.
- REPAIR csv-table USE_FRM now works.
- It did not work before as CSV tables had extension list in wrong
order.
- Default error messages length for %M increased from 128 to 256 to not
cut information from REPAIR.
- Documented HA_ADMIN_XX variables related to repair.
- Added HA_ADMIN_NEEDS_DATA_CONVERSION to signal that we have to
do data conversions when converting the table (and thus ALTER TABLE
copy algorithm is needed).
- Fixed typo in error message (caused test changes).
* use new deprecated printer for all deprecated server options
* restore alphabetic option sorting order
* move deprecated printer from mysqld.cc to my_getopt.c
* in --help print deprecation message at the end of the option help
* move 'ALL' help text where it belongs - to other SET options, and
with a correct indentation.
* consistently end all or none command-line option help strings
with a dot - my_print_help() needs that.
It's about 50/50 now, so let's do none, less line wraps in --help
* remove trailing spaces from command-line option help strings
Currently there are mechanism to mark a system variable as
deprecated, but they are only used to print warning messages
when a deprecated variable is set.
Leverage the existing mechanisms in order to make the
deprecation information available at the --help output of mysqld by:
* Moving the deprecation information (i.e `deprecation_substitute`
attribute) from the `sys_var` class into the `my_option` struct.
As every `sys_var` contains its own `my_option` struct, the access
to the deprecation information remains available to `sys_var`
objects. `my_getotp` functions, which works directly with
`my_option` structs, gain access to this information while building
the --help output.
* For plugin variables, leverages the `PLUGIN_VAR_DEPRECATED` flag
and set the `deprecation_substitute` attribute accordingly when
building the `my_option` objects.
* Change the `option_cmp` function to use the `deprecation_substitute`
attribute instead of the name when sorting the options. This way
deprecated options and the substitutes will be grouped together.
All new code of the whole pull request, including one or several files
that are either new files or modified ones, are contributed under the
BSD-new license. I am contributing on behalf of my employer
Amazon Web Services, Inc.
