The invariant of write-ahead logging is that before any change to a
page is written to the data file, the corresponding log record must
must first have been durably written.
In crash recovery, there were some sloppy checks for this. Let us
implement accurate checks and flag an inconsistency as a hard error,
so that we can avoid further corruption of a corrupted database.
For data extraction from the corrupted database, innodb_force_recovery
can be used.
Before recovery is reading any data pages or invoking
buf_dblwr_t::recover() to recover torn pages from the
doublewrite buffer, InnoDB will have parsed the log until the
final LSN and updated log_sys.lsn to that. So, we can rely on
log_sys.lsn at all times. The doublewrite buffer recovery has been
refactored in such a way that the recv_sys.dblwr.pages may be consulted
while discovering files and their page sizes, but nothing will be
written back to data files before buf_dblwr_t::recover() is invoked.
recv_max_page_lsn, recv_lsn_checks_on: Remove.
recv_sys_t::validate_checkpoint(): Validate the write-ahead-logging
condition at the end of the recovery.
recv_dblwr_t::validate_page(): Keep track of the maximum LSN
(if we are checking a non-doublewrite copy of a page) but
do not complain LSN being in the future. The doublewrite buffer
is a special case, because it will be read early during recovery.
Besides, starting with commit 762bcb81b5
the dblwr=true copies of pages may legitimately be "too new".
recv_dblwr_t::find_page(): Find a valid page with the smallest
FIL_PAGE_LSN that is in the valid range for recovery.
recv_dblwr_t::restore_first_page(): Replaced by find_page().
Only buf_dblwr_t::recover() will write to data files.
buf_dblwr_t::recover(): Simplify the message output. Do attempt
doublewrite recovery on user page read error. Ignore doublewrite
pages whose FIL_PAGE_LSN is outside the usable bounds. Previously,
we could wrongly recover a too new page from the doublewrite buffer.
It is unlikely that this could have lead to an actual error.
Write back all recovered pages from the doublewrite buffer here,
including for the first page of any tablespace.
buf_page_is_corrupted(): Distinguish the return values
CORRUPTED_FUTURE_LSN and CORRUPTED_OTHER.
buf_page_check_corrupt(): Return the error code DB_CORRUPTION
in case the LSN is in the future.
Datafile::read_first_page_flags(): Split from read_first_page().
Take a copy of the first page as a parameter.
recv_sys_t::free_corrupted_page(): Take the file as a parameter
and return whether a message was displayed. This avoids some duplicated
and incomplete error messages.
buf_page_t::read_complete(): Remove some redundant output and always
display the name of the corrupted file. Never return DB_FAIL;
use it only in internal error handling.
IORequest::read_complete(): Assume that buf_page_t::read_complete()
will have reported any error.
fil_space_t::set_corrupted(): Return whether this is the first time
the tablespace had been flagged as corrupted.
Datafile::validate_first_page(), fil_node_open_file_low(),
fil_node_open_file(), fil_space_t::read_page0(),
fil_node_t::read_page0(): Add a parameter for a copy of the
first page, and a parameter to indicate whether the FIL_PAGE_LSN
check should be suppressed. Before buf_dblwr_t::recover() is
invoked, we cannot validate the FIL_PAGE_LSN, but we can trust the
FSP_SPACE_FLAGS and the tablespace ID that may be present in a
potentially too new copy of a page.
Reviewed by: Debarun Banerjee
In any test that uses wait_all_purged.inc, ensure that InnoDB tables
will be created without persistent statistics.
This is a follow-up to commit cd04673a17
after a similar failure was observed in the innodb_zip.blob test.
The motivation of introducing the parameter
innodb_purge_rseg_truncate_frequency in
mysql/mysql-server@28bbd66ea5 and
mysql/mysql-server@8fc2120fed
seems to have been to avoid stalls due to freeing undo log pages
or truncating undo log tablespaces. In MariaDB Server,
innodb_undo_log_truncate=ON should be a much lighter operation
than in MySQL, because it will not involve any log checkpoint.
Another source of performance stalls should be
trx_purge_truncate_rseg_history(), which is shrinking the history list
by freeing the undo log pages whose undo records have been purged.
To alleviate that, we will introduce a purge_truncation_task that will
offload this from the purge_coordinator_task. In that way, the next
innodb_purge_batch_size pages may be parsed and purged while the pages
from the previous batch are being freed and the history list being shrunk.
The processing of innodb_undo_log_truncate=ON will still remain the
responsibility of the purge_coordinator_task.
purge_coordinator_state::count: Remove. We will ignore
innodb_purge_rseg_truncate_frequency, and act as if it had been
set to 1 (the maximum shrinking frequency).
purge_coordinator_state::do_purge(): Invoke an asynchronous task
purge_truncation_callback() to free the undo log pages.
purge_sys_t::iterator::free_history(): Free those undo log pages
that have been processed. This used to be a part of
trx_purge_truncate_history().
purge_sys_t::clone_end_view(): Take a new value of purge_sys.head
as a parameter, so that it will be updated while holding exclusive
purge_sys.latch. This is needed for race-free access to the field
in purge_truncation_callback().
Reviewed by: Vladislav Lesin
The approach to handling corruption that was chosen by Oracle in
commit 177d8b0c12
is not really useful. Not only did it actually fail to prevent InnoDB
from crashing, but it is making things worse by blocking attempts to
rescue data from or rebuild a partially readable table.
We will try to prevent crashes in a different way: by propagating
errors up the call stack. We will never mark the clustered index
persistently corrupted, so that data recovery may be attempted by
reading from the table, or by rebuilding the table.
This should also fix MDEV-13680 (crash on btr_page_alloc() failure);
it was extensively tested with innodb_file_per_table=0 and a
non-autoextend system tablespace.
We should now avoid crashes in many cases, such as when a page
cannot be read or allocated, or an inconsistency is detected when
attempting to update multiple pages. We will not crash on double-free,
such as on the recovery of DDL in system tablespace in case something
was corrupted.
Crashes on corrupted data are still possible. The fault injection mechanism
that is introduced in the subsequent commit may help catch more of them.
buf_page_import_corrupt_failure: Remove the fault injection, and instead
corrupt some pages using Perl code in the tests.
btr_cur_pessimistic_insert(): Always reserve extents (except for the
change buffer), in order to prevent a subsequent allocation failure.
btr_pcur_open_at_rnd_pos(): Merged to the only caller ibuf_merge_pages().
btr_assert_not_corrupted(), btr_corruption_report(): Remove.
Similar checks are already part of btr_block_get().
FSEG_MAGIC_N_BYTES: Replaces FSEG_MAGIC_N_VALUE.
dict_hdr_get(), trx_rsegf_get_new(), trx_undo_page_get(),
trx_undo_page_get_s_latched(): Replaced with error-checking calls.
trx_rseg_t::get(mtr_t*): Replaces trx_rsegf_get().
trx_rseg_header_create(): Let the caller update the TRX_SYS page if needed.
trx_sys_create_sys_pages(): Merged with trx_sysf_create().
dict_check_tablespaces_and_store_max_id(): Do not access
DICT_HDR_MAX_SPACE_ID, because it was already recovered in dict_boot().
Merge dict_check_sys_tables() with this function.
dir_pathname(): Replaces os_file_make_new_pathname().
row_undo_ins_remove_sec(): Do not modify the undo page by adding
a terminating NUL byte to the record.
btr_decryption_failed(): Report decryption failures
dict_set_corrupted_by_space(), dict_set_encrypted_by_space(),
dict_set_corrupted_index_cache_only(): Remove.
dict_set_corrupted(): Remove the constant parameter dict_locked=false.
Never flag the clustered index corrupted in SYS_INDEXES, because
that would deny further access to the table. It might be possible to
repair the table by executing ALTER TABLE or OPTIMIZE TABLE, in case
no B-tree leaf page is corrupted.
dict_table_skip_corrupt_index(), dict_table_next_uncorrupted_index(),
row_purge_skip_uncommitted_virtual_index(): Remove, and refactor
the callers to read dict_index_t::type only once.
dict_table_is_corrupted(): Remove.
dict_index_t::is_btree(): Determine if the index is a valid B-tree.
BUF_GET_NO_LATCH, BUF_EVICT_IF_IN_POOL: Remove.
UNIV_BTR_DEBUG: Remove. Any inconsistency will no longer trigger
assertion failures, but error codes being returned.
buf_corrupt_page_release(): Replaced with a direct call to
buf_pool.corrupted_evict().
fil_invalid_page_access_msg(): Never crash on an invalid read;
let the caller of buf_page_get_gen() decide.
btr_pcur_t::restore_position(): Propagate failure status to the caller
by returning CORRUPTED.
opt_search_plan_for_table(): Simplify the code.
row_purge_del_mark(), row_purge_upd_exist_or_extern_func(),
row_undo_ins_remove_sec_rec(), row_undo_mod_upd_del_sec(),
row_undo_mod_del_mark_sec(): Avoid mem_heap_create()/mem_heap_free()
when no secondary indexes exist.
row_undo_mod_upd_exist_sec(): Simplify the code.
row_upd_clust_step(), dict_load_table_one(): Return DB_TABLE_CORRUPT
if the clustered index (and therefore the table) is corrupted, similar
to what we do in row_insert_for_mysql().
fut_get_ptr(): Replace with buf_page_get_gen() calls.
buf_page_get_gen(): Return nullptr and *err=DB_CORRUPTION
if the page is marked as freed. For other modes than
BUF_GET_POSSIBLY_FREED or BUF_PEEK_IF_IN_POOL this will
trigger a debug assertion failure. For BUF_GET_POSSIBLY_FREED,
we will return nullptr for freed pages, so that the callers
can be simplified. The purge of transaction history will be
a new user of BUF_GET_POSSIBLY_FREED, to avoid crashes on
corrupted data.
buf_page_get_low(): Never crash on a corrupted page, but simply
return nullptr.
fseg_page_is_allocated(): Replaces fseg_page_is_free().
fts_drop_common_tables(): Return an error if the transaction
was rolled back.
fil_space_t::set_corrupted(): Report a tablespace as corrupted if
it was not reported already.
fil_space_t::io(): Invoke fil_space_t::set_corrupted() to report
out-of-bounds page access or other errors.
Clean up mtr_t::page_lock()
buf_page_get_low(): Validate the page identifier (to check for
recently read corrupted pages) after acquiring the page latch.
buf_page_t::read_complete(): Flag uninitialized (all-zero) pages
with DB_FAIL. Return DB_PAGE_CORRUPTED on page number mismatch.
mtr_t::defer_drop_ahi(): Renamed from mtr_defer_drop_ahi().
recv_sys_t::free_corrupted_page(): Only set_corrupt_fs()
if any log records exist for the page. We do not mind if read-ahead
produces corrupted (or all-zero) pages that were not actually needed
during recovery.
recv_recover_page(): Return whether the operation succeeded.
recv_sys_t::recover_low(): Simplify the logic. Check for recovery error.
Thanks to Matthias Leich for testing this extensively and to the
authors of https://rr-project.org for making it easy to diagnose
and fix any failures that were found during the testing.
mtr_t::page_lock(): Validate the page number.
ibuf_tree_root_get(): Remove assertions that became redundant.
The assertions in btr_validate_level() are kind of redundant as well,
but because they are ut_a(), they are also present in release builds,
while the ones in mtr_t::page_lock() are only present in debug builds.
btr_cur_position(): Do not duplicate an assertion that is part of
page_cur_position().
dict_load_tablespace(): Introduce a new option
DICT_ERR_IGNORE_TABLESPACE that will suppress loading a tablespace
when a table is going to be dropped.
Historically, InnoDB supported a buggy page checksum algorithm that did not
compute a checksum over the full page. Later, well before MySQL 4.1
introduced .ibd files and the innodb_file_per_table option, the algorithm
was corrected and the first 4 bytes of each page were redefined to be
a checksum.
The original checksum was so slow that an option to disable page checksum
was introduced for benchmarketing purposes.
The Intel Nehalem microarchitecture introduced the SSE4.2 instruction set
extension, which includes instructions for faster computation of CRC-32C.
In MySQL 5.6 (and MariaDB 10.0), innodb_checksum_algorithm=crc32 was
implemented to make of that. As that option was changed to be the default
in MySQL 5.7, a bug was found on big-endian platforms and some work-around
code was added to weaken that checksum further. MariaDB disables that
work-around by default since MDEV-17958.
Later, SIMD-accelerated CRC-32C has been implemented in MariaDB for POWER
and ARM and also for IA-32/AMD64, making use of carry-less multiplication
where available.
Long story short, innodb_checksum_algorithm=crc32 is faster and more secure
than the pre-MySQL 5.6 checksum, called innodb_checksum_algorithm=innodb.
It should have removed any need to use innodb_checksum_algorithm=none.
The setting innodb_checksum_algorithm=crc32 is the default in
MySQL 5.7 and MariaDB Server 10.2, 10.3, 10.4. In MariaDB 10.5,
MDEV-19534 made innodb_checksum_algorithm=full_crc32 the default.
It is even faster and more secure.
The default settings in MariaDB do allow old data files to be read,
no matter if a worse checksum algorithm had been used.
(Unfortunately, before innodb_checksum_algorithm=full_crc32,
the data files did not identify which checksum algorithm is being used.)
The non-default settings innodb_checksum_algorithm=strict_crc32 or
innodb_checksum_algorithm=strict_full_crc32 would only allow CRC-32C
checksums. The incompatibility with old data files is why they are
not the default.
The newest server not to support innodb_checksum_algorithm=crc32
were MySQL 5.5 and MariaDB 5.5. Both have reached their end of life.
A valid reason for using innodb_checksum_algorithm=innodb could have
been the ability to downgrade. If it is really needed, data files
can be converted with an older version of the innochecksum utility.
Because there is no good reason to allow data files to be written
with insecure checksums, we will reject those option values:
innodb_checksum_algorithm=none
innodb_checksum_algorithm=innodb
innodb_checksum_algorithm=strict_none
innodb_checksum_algorithm=strict_innodb
Furthermore, the following innochecksum options will be removed,
because only strict crc32 will be supported:
innochecksum --strict-check=crc32
innochecksum -C crc32
innochecksum --write=crc32
innochecksum -w crc32
If a user wishes to convert a data file to use a different checksum
(so that it might be used with the no-longer-supported
MySQL 5.5 or MariaDB 5.5, which do not support IMPORT TABLESPACE
nor system tablespace format changes that were made in MariaDB 10.3),
then the innochecksum tool from MariaDB 10.2, 10.3, 10.4, 10.5 or
MySQL 5.7 can be used.
Reviewed by: Thirunarayanan Balathandayuthapani
Added the condition in innochecksum tool to check page id mismatch.
This could catch the write corruption caused by InnoDB.
Added the debug insert inside fil_io() to check whether it writes
the page to wrong offset.
