MDEV-34171 denied removing indirect routines/tables after
recover_from_failed_open() for auto-create partition case. Now we are
going further and keep them for any failed table reopen.
MDEV-34171 did not handle correctly open_and_process_routine() after
that skip of sp_remove_not_own_routines(). Now it is fixed by
sroutine_to_open correct usage.
table->move_fields has some limitations:
1. It cannot be used in cascade
2. It should always have a restoring pair
In this case, an error has occurred before the field ptr was restored, returning
from the function in that state. Even in case of an error, the table can be
reused afterwards and table->field[i]->ptr is not reset in between.
The solution is to restore the field pointers immanently whenever they've been
deviated.
Also add an assertion that ensures that table fields are restored after the use
in close_thread_tables.
it's incorrect to zero out table->triggers->extra_null_bitmap
before a statement, because if insert uses an explicit field list
and omits a field that has no default value, the field should
get NULL implicitly. So extra_null_bitmap should have 1s for all
fields that have no defaults
* create extra_null_bitmap_init and initialize it as above
* copy extra_null_bitmap_init to extra_null_bitmap for inserts
* still zero out extra_null_bitmap for updates/deletes where
all fields definitely have a value
* make not_null_fields_have_null_values() to send
ER_NO_DEFAULT_FOR_FIELD for fields with no default and no value,
otherwise creation of a trigger with an empty body would change the
error message
Note: Changes to the test innodb.stats_persistent
in commit e5c4c0842d (MDEV-35443)
are not merged, because the test scenario is impossible
due to commit e66928ab28 (MDEV-33462).
Fix a regression introduced by commit d98ac851 (MDEV-29935, MDEV-26247) causing
MAX_TABLES overflow in `setup_table_map()`. The check for MAX_TABLES was moved
outside of the loop that increments table numbers, allowing overflows during
loop iterations. Since setup_table_map() operates on a 64-bit bitmap, table
numbers exceeding 64 triggered the UBSAN check.
This commit returns the overflow check within the loop and adds a debug
assertion to `setup_table_map()` to ensure no bitmap overrun occurs.
This problem occured for statements like `INSERT INTO t1 SELECT 1`,
which do not have tables in the SELECT part. In such scenarios
SELECT_LEX::insert_tables was not properly set at `setup_tables()`,
and this led to either incorrect execution or a crash
Reviewer: Oleksandr Byelkin <sanja@mariadb.com>
This bug has the same nature as the issues
MDEV-34718: Trigger doesn't work correctly with bulk update
MDEV-24411: Trigger doesn't work correctly with bulk insert
To fix the issue covering all use cases, resetting the thd->bulk_param
temporary to the value nullptr before invoking triggers and restoring
its original value on finishing execution of a trigger is moved to the method
Table_triggers_list::process_triggers
that be invoked ultimately for any kind of triggers.
The problem was that when using clang + asan, we do not get a correct value
for the thread stack as some local variables are not allocated at the
normal stack.
It looks like that for example clang 18.1.3, when compiling with
-O2 -fsanitize=addressan it puts local variables and things allocated by
alloca() in other areas than on the stack.
The following code shows the issue
Thread 6 "mariadbd" hit Breakpoint 3, do_handle_one_connection
(connect=0x5080000027b8,
put_in_cache=<optimized out>) at sql/sql_connect.cc:1399
THD *thd;
1399 thd->thread_stack= (char*) &thd;
(gdb) p &thd
(THD **) 0x7fffedee7060
(gdb) p $sp
(void *) 0x7fffef4e7bc0
The address of thd is 24M away from the stack pointer
(gdb) info reg
...
rsp 0x7fffef4e7bc0 0x7fffef4e7bc0
...
r13 0x7fffedee7060 140737185214560
r13 is pointing to the address of the thd. Probably some kind of
"local stack" used by the sanitizer
I have verified this with gdb on a recursive call that calls alloca()
in a loop. In this case all objects was stored in a local heap,
not on the stack.
To solve this issue in a portable way, I have added two functions:
my_get_stack_pointer() returns the address of the current stack pointer.
The code is using asm instructions for intel 32/64 bit, powerpc,
arm 32/64 bit and sparc 32/64 bit.
Supported compilers are gcc, clang and MSVC.
For MSVC 64 bit we are using _AddressOfReturnAddress()
As a fallback for other compilers/arch we use the address of a local
variable.
my_get_stack_bounds() that will return the address of the base stack
and stack size using pthread_attr_getstack() or NtCurrentTed() with
fallback to using the address of a local variable and user provided
stack size.
Server changes are:
- Moving setting of thread_stack to THD::store_globals() using
my_get_stack_bounds().
- Removing setting of thd->thread_stack, except in functions that
allocates a lot on the stack before calling store_globals(). When
using estimates for stack start, we reduce stack_size with
MY_STACK_SAFE_MARGIN (8192) to take into account the stack used
before calling store_globals().
I also added a unittest, stack_allocation-t, to verify the new code.
Reviewed-by: Sergei Golubchik <serg@mariadb.org>
Fixed by checking handler_stats if it's active instead of
thd->variables.log_slow_verbosity & LOG_SLOW_VERBOSITY_ENGINE.
Reviewed-by: Sergei Petrunia <sergey@mariadb.com>
Running an UPDATE statement in PS mode and having positional
parameter(s) bound with an array of actual values (that is
prepared to be run in bulk mode) results in incorrect behaviour
in presence of on update trigger that also executes an UPDATE
statement. The same is true for handling a DELETE statement in
presence of on delete trigger. Typically, the visible effect of
such incorrect behaviour is expressed in a wrong number of
updated/deleted rows of a target table. Additionally, in case UPDATE
statement, a number of modified rows and a state message returned
by a statement contains wrong information about a number of modified rows.
The reason for incorrect number of updated/deleted rows is that
a data structure used for binding positional argument with its
actual values is stored in THD (this is thd->bulk_param) and reused
on processing every INSERT/UPDATE/DELETE statement. It leads to
consuming actual values bound with top-level UPDATE/DELETE statement
by other DML statements used by triggers' body.
To fix the issue, reset the thd->bulk_param temporary to the value
nullptr before invoking triggers and restore its value on finishing
its execution.
The second part of the problem relating with wrong value of affected
rows reported by Connector/C API is caused by the fact that diagnostics
area is reused by an original DML statement and a statement invoked
by a trigger. This fact should be take into account on finalizing a
state of diagnostics area on completion running of a statement.
Important remark: in case the macros DBUG_OFF is on, call of the method
Diagnostics_area::reset_diagnostics_area()
results in reset of the data members
m_affected_rows, m_statement_warn_count.
Values of these data members of the class Diagnostics_area are used on
sending OK and EOF messages. In case DML statement is executed in PS bulk
mode such resetting results in sending wrong result values to a client
for affected rows in case the DML statement fires a triggers. So, reset
these data members only in case the current statement being processed
is not run in bulk mode.
Improve performance of queries like
SELECT * FROM t1 WHERE field = NAME_CONST('a', 4);
by, in this example, replacing the WHERE clause with field = 4
in the case of ref access.
The rewrite is done during fix_fields and we disambiguate this
case from other cases of NAME_CONST by inspecting where we are
in parsing. We rely on THD::where to accomplish this. To
improve performance there, we change the type of THD::where to
be an enumeration, so we can avoid string comparisons during
Item_name_const::fix_fields. Consequently, this patch also
changes all usages of THD::where to conform likewise.
The special logic used by the memory storage engine
to keep slaves in sync with the master on a restart can
break replication. In particular, after a restart, the
master writes DELETE statements in the binlog for
each MEMORY-based table so the slave can empty its
data. If the DELETE is not executable, e.g. due to
invalid triggers, the slave will error and fail, whereas
the master will never see the problem.
Instead of DELETE statements, use TRUNCATE to
keep slaves in-sync with the master, thereby bypassing
triggers.
Reviewed By:
===========
Kristian Nielsen <knielsen@knielsen-hq.org>
Andrei Elkin <andrei.elkin@mariadb.com>
One of possible use cases that reproduces the memory leakage listed below:
set timestamp= unix_timestamp('2000-01-01 00:00:00');
create or replace table t1 (x int) with system versioning
partition by system_time interval 1 hour auto
partitions 3;
create table t2 (x int);
create trigger tr after insert on t2 for each row update t1 set x= 11;
create or replace procedure sp2() insert into t2 values (5);
set timestamp= unix_timestamp('2000-01-01 04:00:00');
call sp2;
set timestamp= unix_timestamp('2000-01-01 13:00:00');
call sp2; # <<=== Memory leak happens there. In case MariaDB server is built
with the option -DWITH_PROTECT_STATEMENT_MEMROOT,
the second execution would hit assert failure.
The reason of leaking a memory is that once a new partition be created
the table should be closed and re-opened. It results in calling the function
extend_table_list() that indirectly invokes the function sp_add_used_routine()
to add routines implicitly used by the statement that makes a new memory
allocation.
To fix it, don't remove routines and tables the statement implicitly depends
on when a table being closed for subsequent re-opening.
