Running an UPDATE statement in PS mode and having positional
parameter(s) bound with an array of actual values (that is
prepared to be run in bulk mode) results in incorrect behaviour
in presence of on update trigger that also executes an UPDATE
statement. The same is true for handling a DELETE statement in
presence of on delete trigger. Typically, the visible effect of
such incorrect behaviour is expressed in a wrong number of
updated/deleted rows of a target table. Additionally, in case UPDATE
statement, a number of modified rows and a state message returned
by a statement contains wrong information about a number of modified rows.
The reason for incorrect number of updated/deleted rows is that
a data structure used for binding positional argument with its
actual values is stored in THD (this is thd->bulk_param) and reused
on processing every INSERT/UPDATE/DELETE statement. It leads to
consuming actual values bound with top-level UPDATE/DELETE statement
by other DML statements used by triggers' body.
To fix the issue, reset the thd->bulk_param temporary to the value
nullptr before invoking triggers and restore its value on finishing
its execution.
The second part of the problem relating with wrong value of affected
rows reported by Connector/C API is caused by the fact that diagnostics
area is reused by an original DML statement and a statement invoked
by a trigger. This fact should be take into account on finalizing a
state of diagnostics area on completion running of a statement.
Important remark: in case the macros DBUG_OFF is on, call of the method
Diagnostics_area::reset_diagnostics_area()
results in reset of the data members
m_affected_rows, m_statement_warn_count.
Values of these data members of the class Diagnostics_area are used on
sending OK and EOF messages. In case DML statement is executed in PS bulk
mode such resetting results in sending wrong result values to a client
for affected rows in case the DML statement fires a triggers. So, reset
these data members only in case the current statement being processed
is not run in bulk mode.
The MDEV-29693 conflict resolution is from Monty, as well as is
a bug fix where ANALYZE TABLE wrongly built histograms for
single-column PRIMARY KEY.
Also includes a fix for safe_malloc error reporting.
Other things:
- Copied main.log_slow from 10.4 to avoid mtr issue
Disabled test:
- spider/bugfix.mdev_27239 because we started to get
+Error 1429 Unable to connect to foreign data source: localhost
-Error 1158 Got an error reading communication packets
- main.delayed
- Bug#54332 Deadlock with two connections doing LOCK TABLE+INSERT DELAYED
This part is disabled for now as it fails randomly with different
warnings/errors (no corruption).
Raise notes if indexes cannot be used:
- in case of data type or collation mismatch (diferent error messages).
- in case if a table field was replaced to something else
(e.g. Item_func_conv_charset) during a condition rewrite.
Added option to write warnings and notes to the slow query log for
slow queries.
New variables added/changed:
- note_verbosity, with is a set of the following options:
basic - All old notes
unusable_keys - Print warnings about keys that cannot be used
for select, delete or update.
explain - Print unusable_keys warnings for EXPLAIN querys.
The default is 'basic,explain'. This means that for old installations
the only notable new behavior is that one will get notes about
unusable keys when one does an EXPLAIN for a query. One can turn all
of all notes by either setting note_verbosity to "" or setting sql_notes=0.
- log_slow_verbosity has a new option 'warnings'. If this is set
then warnings and notes generated are printed in the slow query log
(up to log_slow_max_warnings times per statement).
- log_slow_max_warnings - Max number of warnings written to
slow query log.
Other things:
- One can now use =ALL for any 'set' variable to set all options at once.
For example using "note_verbosity=ALL" in a config file or
"SET @@note_verbosity=ALL' in SQL.
- mysqldump will in the future use @@note_verbosity=""' instead of
@sql_notes=0 to disable notes.
- Added "enum class Data_type_compatibility" and changing the return type
of all Field::can_optimize*() methods from "bool" to this new data type.
Reviewer & Co-author: Alexander Barkov <bar@mariadb.com>
- The code that prints out the notes comes mainly from Alexander
At the moment we cannot support
wsrep_forced_binlog_format=[MIXED|STATEMENT]
during CREATE TABLE AS SELECT.
Statement will use ROW instead and give
a warning.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
This patch is the result of running
run-clang-tidy -fix -header-filter=.* -checks='-*,modernize-use-equals-default' .
Code style changes have been done on top. The result of this change
leads to the following improvements:
1. Binary size reduction.
* For a -DBUILD_CONFIG=mysql_release build, the binary size is reduced by
~400kb.
* A raw -DCMAKE_BUILD_TYPE=Release reduces the binary size by ~1.4kb.
2. Compiler can better understand the intent of the code, thus it leads
to more optimization possibilities. Additionally it enabled detecting
unused variables that had an empty default constructor but not marked
so explicitly.
Particular change required following this patch in sql/opt_range.cc
result_keys, an unused template class Bitmap now correctly issues
unused variable warnings.
Setting Bitmap template class constructor to default allows the compiler
to identify that there are no side-effects when instantiating the class.
Previously the compiler could not issue the warning as it assumed Bitmap
class (being a template) would not be performing a NO-OP for its default
constructor. This prevented the "unused variable warning".
When creating a recursive CTE, the column types are taken from the
non recursive part of the CTE (this is according to the SQL standard).
This patch adds code to abort the CTE if the calculated values in the
recursive part does not fit in the fields in the created temporary table.
The new code only affects recursive CTE, so it should not cause any notable
problems for old applications.
Other things:
- Fixed that we get correct row numbers for warnings generated with
WITH RECURSIVE
Reviewer: Alexander Barkov <bar@mariadb.com>
procedure
Analysis: m_current_row_for_warning is reset to 1 during cleanup phase of
stored procedure. When we perform a copy because some statement of procedure
created warning, this reset value is passed to push_warning().
Hence the output is always 1.
Fix: Add a parameter in relevant functions to pass correct value of
row_number and don't use m_current_row_for_warning directly.
Fixup for MDEV-10075
Analysis: ERROR_INDEX implemented in MDEV-10075 was not intuitively clear.
Fix: changed parser to use ROW_NUMBER instead of ERROR_INDEX. Removed
ERROR_INDEX and ERROR_INDEX_SYM from related files. Changed m_error_index
to m_row_number.
use existing Warning_info::m_current_row_for_warning instead
of a newly introduced counter.
But use m_current_row_for_warning to count rows also in the parser
and during prepare.
Extended the parser for GET DIAGNOSTICS to use ERROR_INDEX to get
warning/error index.
Error information is stored in Sql_condition. So it can be used to
store the index of warning/error too. THD::current_insert_index keeps a
track of count for each row that is processed or going to be inserted in the
table (or first row in case of prepare phase). When an error occurs,
first we need to fetch corrected error index (using correct_error_index())
for an error number. This is needed because in prepare phase, the error
may not be because of rows/values. In such case, correct value of
error_index should be 0. Once correct value if fetched, assign it to
Sql_condition::error_index when the object is created during error/warning.
This error_index variable is returned when ERROR_INDEX is used in
GET DIAGNOSTICS.
The problem is that array binding uses net buffer to read parameters for each
execution while each execiting with RETURNING write in the same buffer.
Solution is to allocate new net buffer to avoid changing buffer we are reading
from.
The COM_MULTI did not take off. No connector is using it.
Remove related code from server, and client.
If anything it is a step simplification of already-bloated
dispatch_command(), and related code.
MDEV-17625 Different warnings when comparing a garbage to DATETIME vs TIME
- Splitting processes of data type conversion (to TIME/DATE,DATETIME)
and warning generation.
Warning are now only get collected during conversion (in an "int" variable),
and are pushed in the very end of conversion (not in parallel).
Warnings generated by the low level routines str_to_xxx() and number_to_xxx()
can now be changed at the end, when TIME_FUZZY_DATES is applied,
from "Invalid value" to "Truncated invalid value".
Now "Illegal value" is issued only when the low level routine returned
an error and TIME_FUZZY_DATES was not set. Otherwise, if the low level
routine returned "false" (success), or if NULL was converted to a zero
datetime by TIME_FUZZY_DATES, then "Truncated illegal value"
is issued. This gives better warnings.
- Methods Type_handler::Item_get_date() and
Type_handler::Item_func_hybrid_field_type_get_date() now only
convert and collect warning information, but do not push warnings.
- Changing the return data type for Type_handler::Item_get_date()
and Type_handler::Item_func_hybrid_field_type_get_date() from
"bool" to "void". The conversion result (success vs error) can be
checked by testing ltime->time_type. MYSQL_TIME_{NONE|ERROR}
mean mean error, other values mean success.
- Adding new wrapper methods Type_handler::Item_get_date_with_warn() and
Type_handler::Item_func_hybrid_field_type_get_date_with_warn()
to do conversion followed by raising warnings, and changing
the code to call new Type_handler::***_with_warn() methods.
- Adding a helper class Temporal::Status, a wrapper
for MYSQL_TIME_STATUS with automatic initialization.
- Adding a helper class Temporal::Warn, to collect warnings
but without actually raising them. Moving a part of ErrConv
into a separate class ErrBuff, and deriving both Temporal::Warn
and ErrConv from ErrBuff. The ErrBuff part of Temporal::Warn
is used to collect textual representation of the input data.
- Adding a helper class Temporal::Warn_push. It's used
to collect warning information during conversion, and
automatically pushes warnings to the diagnostics area
on its destructor time (in case of non-zero warning).
- Moving more code from various functions inside class Temporal.
- Adding more Temporal_hybrid constructors and
protected Temporal methods make_from_xxx(),
which convert and only collect warning information, but do not
actually raise warnings.
- Now the low level functions str_to_datetime() and str_to_time()
always set status->warning if the return value is "true" (error).
- Now the low level functions number_to_time() and number_to_datetime()
set the "*was_cut" argument if the return value is "true" (error).
- Adding a few DBUG_ASSERTs to make sure that str_to_xxx() and
number_to_xxx() always set warnings on error.
- Adding new warning flags MYSQL_TIME_WARN_EDOM and MYSQL_TIME_WARN_ZERO_DATE
for the code symmetry. Before this change there was a special
code path for (rc==true && was_cut==0) which was treated by
Field_temporal::store_invalid_with_warning as "zero date violation".
Now was_cut==0 always means that there are no any error/warnings/notes
to be raised, not matter what rc is.
- Using new Temporal_hybrid constructors in combination with
Temporal::Warn_push inside str_to_datetime_with_warn(),
double_to_datetime_with_warn(), int_to_datetime_with_warn(),
Field::get_date(), Item::get_date_from_string(), and a few other places.
- Removing methods Dec_ptr::to_datetime_with_warn(),
Year::to_time_with_warn(), my_decimal::to_datetime_with_warn(),
Dec_ptr::to_datetime_with_warn().
Fixing Sec6::to_time() and Sec6::to_datetime() to
convert and only collect warnings, without raising warnings.
Now warning raising functionality resides in Temporal::Warn_push.
- Adding classes Longlong_hybrid_null and Double_null, to
return both value and the "IS NULL" flag. Adding methods
Item::to_double_null(), to_longlong_hybrid_null(),
Item_func_hybrid_field_type::to_longlong_hybrid_null_op(),
Item_func_hybrid_field_type::to_double_null_op().
Removing separate classes VInt and VInt_op, as they
have been replaced by a single class Longlong_hybrid_null.
- Adding a helper method Temporal::type_name_by_timestamp_type(),
moving a part of make_truncated_value_warning() into it,
and reusing in Temporal::Warn::push_conversion_warnings().
- Removing Item::make_zero_date() and
Item_func_hybrid_field_type::make_zero_mysql_time().
They provided duplicate functionality.
Now this code resides in Temporal::make_fuzzy_date().
The latter is now called for all Item types when data type
conversion (to DATE/TIME/DATETIME) is involved, including
Item_field and Item_direct_view_ref.
This fixes MDEV-17563: Item_direct_view_ref now correctly converts
NULL to a zero date when TIME_FUZZY_DATES says so.
The problem happened because {{Field_xxx::store(longlong nr, bool unsigned_val)}} erroneously passed {{unsigned_flag}} to the {{usec}} parameter of this constructor:
{code:cpp}
Datetime(int *warn, longlong sec, ulong usec, date_conv_mode_t flags)
{code}
1. Changing Time and Datetime constructors to accept data as Sec6 rather than as
longlong/double/my_decimal, so it's not possible to do such mistakes
in the future. Additional good effect of these changes:
- This reduced some amount of similar code (minus ~35 lines).
- The code now does not rely on the fact that "unsigned_flag" is
not important inside Datetime().
The constructor always gets all three parts: sign, integer part,
fractional part. The simple the better.
2. Fixing Field_xxx::store() to use the new Datetime constructor format.
This change actually fixes the problem.
3. Adding "explicit" keyword to all Sec6 constructors,
to avoid automatic hidden conversion from double/my_decimal to Sec6,
as well as from longlong/ulonglong through double to Sec6.
4. Change#1 caused (as a dependency) changes in a few places
with code like this:
bool neg= nr < 0 && !unsigned_val;
ulonglong value= m_neg ? (ulonglong) -nr : (ulonglong) nr;
These fragments relied on a non-standard behavior with
the operator "minus" applied to the lowest possible negative
signed long long value. This can lead to different results
depending on the platform and compilation flags.
We have fixed such bugs a few times already.
So instead of modifying the old wrong code to a new wrong code,
replacing all such fragments to use Longlong_hybrid,
which correctly handles this special case with -LONGLONG_MIN
in its method abs().
This also reduced the amount of similar code
(1 or 2 new lines instead 3 old lines in all 6 such fragments).
5. Removing ErrConvInteger(longlong nr, bool unsigned_flag= false)
and adding ErrConvInteger(Longlong_hybrid) instead, to encourage
use of safe Longlong_hybrid instead of unsafe pairs nr+neg.
6. Removing unused ErrConvInteger from Item_cache_temporal::get_date()
Handle string length as size_t, consistently (almost always:))
Change function prototypes to accept size_t, where in the past
ulong or uint were used. change local/member variables to size_t
when appropriate.
This fix excludes rocksdb, spider,spider, sphinx and connect for now.
This preserves const str for constant strings
Other things
- A few variables where changed from LEX_STRING to LEX_CSTRING
- Incident_log_event::Incident_log_event and record_incident where
changed to take LEX_CSTRING* as an argument instead of LEX_STRING
