Partial commit of the greater MDEV-34348 scope.
MDEV-34348: MariaDB is violating clang-16 -Wcast-function-type-strict
The functions queue_compare, qsort2_cmp, and qsort_cmp2
all had similar interfaces, and were used interchangable
and unsafely cast to one another.
This patch consolidates the functions all into the
qsort_cmp2 interface.
Reviewed By:
============
Marko Mäkelä <marko.makela@mariadb.com>
Search conditions were evaluated using val_int(), which was wrong.
Fixing the code to use val_bool() instead.
Details:
- Adding a new item_base_t::IS_COND flag which marks Items used
as <search condition> in WHERE, HAVING, JOIN ON, CASE WHEN clauses.
The flag is at the parse time.
These expressions must be evaluated using val_bool() rather than val_int().
Note, the optimizer creates more Items which are used as search conditions.
Most of these items are not marked with IS_COND yet. This is OK for now,
but eventually these Items can also be fixed to have the flag.
- Adding a method Item::is_cond() which tests if the Item has the IS_COND flag.
- Implementing Item_cache_bool. It evaluates the cached expression using
val_bool() rather than val_int().
Overriding Type_handler_bool::Item_get_cache() to create Item_cache_bool.
- Implementing Item::save_bool_in_field(). It uses val_bool() rather than
val_int() to evaluate the expression.
- Implementing Type_handler_bool::Item_save_in_field()
using Item::save_bool_in_field().
- Fixing all Item_bool_func descendants to implement a virtual val_bool()
rather than a virtual val_int().
- To find places where val_int() should be fixed to val_bool(), a few
DBUG_ASSERT(!is_cond()) where added into val_int() implementations
of selected (most frequent) classes:
Item_field
Item_str_func
Item_datefunc
Item_timefunc
Item_datetimefunc
Item_cache_bool
Item_bool_func
Item_func_hybrid_field_type
Item_basic_constant descendants
- Fixing all places where DBUG_ASSERT() happened during an "mtr" run
to use val_bool() instead of val_int().
When calculate_cond_selectivity_for_table() takes into account multi-
column selectivities from range access, it tries to take-into account
that selectivity for some columns may have been already taken into account.
For example, for range access on IDX1 using {kp1, kp2}, the selectivity
of restrictions on "kp2" might have already been taken into account
to some extent.
So, the code tries to "discount" that using rec_per_key[] estimates.
This seems to be wrong and unreliable: the "discounting" may produce a
rselectivity_multiplier number that hints that the overall selectivity
of range access on IDX1 was greater than 1.
Do a conservative fix: if we arrive at conclusion that selectivity of
range access on condition in IDX1 >1.0, clip it down to 1.
my_like_range*() can create longer keys than Field::char_length().
This caused warnings during print_range().
Fix:
Suppressing warnings in print_range().
The optimizer deals with Rowid Filters this way:
1. First, range optimizer is invoked. It saves information
about all potential range accesses.
2. A query plan is chosen. Suppose, it uses a Rowid Filter on
index $IDX.
3. JOIN::make_range_rowid_filters() calls the range optimizer
again to create a quick select on index $IDX which will be used
to populate the rowid filter.
The problem: KILL command catches the query in step #3. Quick
Select is not created which causes a crash.
Fixed by checking if query was killed. Note: the problem also
affects 10.6, even if error handling for
SQL_SELECT::test_quick_select is different there.
(Variant for 10.6: return error code from SQL_SELECT::test_quick_select)
The optimizer deals with Rowid Filters this way:
1. First, range optimizer is invoked. It saves information
about all potential range accesses.
2. A query plan is chosen. Suppose, it uses a Rowid Filter on
index $IDX.
3. JOIN::make_range_rowid_filters() calls the range optimizer
again to create a quick select on index $IDX which will be used
to populate the rowid filter.
The problem: KILL command catches the query in step #3. Quick
Select is not created which causes a crash.
Fixed by checking if query was killed.
Some fixes related to commit f838b2d799 and
Rows_log_event::do_apply_event() and Update_rows_log_event::do_exec_row()
for system-versioned tables were provided by Nikita Malyavin.
This was required by test versioning.rpl,trx_id,row.
MDEV-33502 Slowdown when running nested statement with many partitions
caused this error as I failed to take into account bigendian architectures.
This patch also introduces bitmap_import() and bitmap_export() to be used
when one wants to store bitmaps in files/logs in a portable way.
Reviewed-by: Kristian Nielsen <knielsen@knielsen-hq.org>
MDEV-33502 Slowdown when running nested statement with many partitions
This change was triggered to help some MariaDB users with close to
10000 bits in their bitmaps.
- Change underlaying storage to be 64 bit instead of 32bit.
- This reduses number of loops to scan bitmaps.
- This can cause some bitmaps to be 4 byte large.
- Ensure that all not used top-bits are always 0 (simplifes code as
the last 64 bit storage is not a special case anymore).
- Use my_find_first_bit() to find the first set bit which is much faster
than scanning trough things byte by byte and then bit by bit.
Other things:
- Added a bool to remember if my_bitmap_init() did allocate the bitmap
array. my_bitmap_free() will only free arrays it did allocate.
This allowed me to remove setting 'bitmap=0' before calling
my_bitmap_free() for cases where the bitmap's where allocated externally.
- my_bitmap_init() sets bitmap to 0 in case of failure.
- Added 'universal' asserts to most bitmap functions.
- Change all remaining calls to bitmap_init() to my_bitmap_init().
- To finish the change from 2014.
- Changed all usage of uint32 in my_bitmap.h to my_bitmap_map.
- Updated bitmap_copy() to handle bitmaps of different size.
- Removed const from bitmap_exists_intersection() as this caused casts
on all usage.
- Removed not used function bitmap_set_above().
- Renamed create_last_word_mask() to create_last_bit_mask() (to match
name changes in my_bitmap.cc)
- Extended bitmap-t with test for more bitmap functions.
Variant#3: moved the logic out of create_key_parts_for_pseudo_indexes
Range Analyzer (get_mm_tree functions) can only process up to MAX_KEY=64
indexes. The problem was that calculate_cond_selectivity_for_table used
it to estimate selectivities for columns, and since a table can
have > MAX_KEY columns, would invoke Range Analyzer with more than MAX_KEY
"pseudo-indexes".
Fixed by making calculate_cond_selectivity_for_table() to run Range
Analyzer with at most MAX_KEY pseudo-indexes. If there are more
columns to process, Range Analyzer will be invoked multiple times.
Also made this change:
- param.real_keynr[0]= 0;
+ MEM_UNDEFINED(¶m.real_keynr, sizeof(param.real_keynr));
Range Analyzer should have no use on real_keynr when it is run with
pseudo-indexes.
Enable unusable key notes for non-equality predicates:
<, <=, =>, >, BETWEEN, IN, LIKE
Note, in some scenarios it displays duplicate notes, e.g.
for queries with ORDER BY:
SELECT * FROM t1
WHERE indexed_string_column >= 10
ORDER BY indexed_string_column
LIMIT 5;
This should be tolarable. Getting rid of the diplicate note
completely would need a much more complex patch, which is
not desiable in 10.6.
Details:
- Changing RANGE_OPT_PARAM::note_unusable_keys from bool
to a new data type Item_func::Bitmap, so the caller can
choose with a better granuality which predicates
should raise unusable key notes inside the range optimizer:
a. all predicates (=, <=>, <, <=, =>, >, BETWEEN, IN, LIKE)
b. all predicates except equality (=, <=>)
c. none of the predicates
"b." is needed because in some scenarios equality predicates (=, <=>)
send unusable key notes at an earlier stage, before the range optimizer,
during update_ref_and_keys(). Calling the range optimizer with
"all predicates" would produce duplicate notes for = and <=> in such cases.
- Fixing get_quick_record_count() to call the range optimizer
with "all predicates except equality" instead of "none of the predicates".
Before this change the range optimizer suppressed all notes for
non-equality predicates: <, <=, =>, >, BETWEEN, IN, LIKE.
This actually fixes the reported problem.
- Fixing JOIN::make_range_rowid_filters() to call the range optimizer
with "all predicates except equality" instead of "all predicates".
Before this change the range optimizer produced duplicate notes
for = and <=> during a rowid_filter optimization.
- Cleanup:
Adding the op_collation argument to Field::raise_note_cannot_use_key_part()
and displaying the operation collation rather than the argument collation
in the unusable key note. This is important for operations with more than
two arguments: BETWEEN and IN, e.g.:
SELECT * FROM t1
WHERE column_utf8mb3_general_ci
BETWEEN 'a' AND 'b' COLLATE utf8mb3_unicode_ci;
SELECT * FROM t1
WHERE column_utf8mb3_general_ci
IN ('a', 'b' COLLATE utf8mb3_unicode_ci);
The note for 'a' now prints utf8mb3_unicode_ci as the collation.
which is the collation of the entire operation:
Cannot use key key1 part[0] for lookup:
"`column_utf8mb3_general_ci`" of collation `utf8mb3_general_ci` >=
"'a'" of collation `utf8mb3_unicode_ci`
Before this change it printed the collation of 'a',
so the note was confusing:
Cannot use key key1 part[0] for lookup:
"`column_utf8mb3_general_ci`" of collation `utf8mb3_general_ci` >=
"'a'" of collation `utf8mb3_general_ci`"
When QUICK_GROUP_MIN_MAX_SELECT is initialized or being reset
it stores the prefix of the last group of the index chosen for
retrieving data (last_value). Later, when looping through records
at get_next() method, the server checks whether the retrieved
group is the last, and if so, it finishes processing.
At the same time, it looks like there is no need for that additional
check since method next_prefix() returns HA_ERR_KEY_NOT_FOUND
or HA_ERR_END_OF_FILE when there are no more satisfying records.
If we do not perform the check, we do not need to retrieve and
store last_value either.
This commit removes using of last_value from QUICK_GROUP_MIN_MAX_SELECT.
Reviewer: Sergei Petrunia <sergey@mariadb.com>
...errors, then failing ASSERT.
UPDATE queries treat warnings as errors. In this case, an invalid
condition "datetime_key_col >= '2012-01'" caused warning-as-error inside
SQL_SELECT::test_quick_select().
The code that called test_quick_select() ignored this error and continued
join optimization. Then it eventually reached a thd->is_error() check
and failed to setup SJ-Materialization which failed an assert.
Fixed this by making SQL_SELECT::test_quick_select() return error in
its return value, and making any code that calls it to check for error
condition and abort the query if the error is returned.
Places in the code that didn't check for errors from
SQL_SELECT::test_quick_select but now do:
- get_quick_record_count() call in make_join_statistics(),
- test_if_skip_sort_order(),
- "Range checked for each record" code.
Extra error handling fixes and commit text wording by Sergei Petrunia,
Reviewed-by: Sergei Petrunia, Oleg Smirnov
(Variant#3: Allow cross-charset comparisons, use a special
CHARSET_INFO to create lookup keys. Review input addressed.)
Equalities that compare utf8mb{3,4}_general_ci strings, like:
WHERE ... utf8mb3_key_col=utf8mb4_value (MB3-4-CMP)
can now be used to construct ref[const] access and also participate
in multiple-equalities.
This means that utf8mb3_key_col can be used for key-lookups when
compared with an utf8mb4 constant, field or expression using '=' or
'<=>' comparison operators.
This is controlled by optimizer_switch='cset_narrowing=on', which is
OFF by default.
IMPLEMENTATION
Item value comparison in (MB3-4-CMP) is done using utf8mb4_general_ci.
This is valid as any utf8mb3 value is also an utf8mb4 value.
When making index lookup value for utf8mb3_key_col, we do "Charset
Narrowing": characters that are in the Basic Multilingual Plane (=BMP) are
copied as-is, as they can be represented in utf8mb3. Characters that are
outside the BMP cannot be represented in utf8mb3 and are replaced
with U+FFFD, the "Replacement Character".
In utf8mb4_general_ci, the Replacement Character compares as equal to any
character that's not in BMP. Because of this, the constructed lookup value
will find all index records that would be considered equal by the original
condition (MB3-4-CMP).
Approved-by: Monty <monty@mariadb.org>
The MDEV-29693 conflict resolution is from Monty, as well as is
a bug fix where ANALYZE TABLE wrongly built histograms for
single-column PRIMARY KEY.
Also includes a fix for safe_malloc error reporting.
Other things:
- Copied main.log_slow from 10.4 to avoid mtr issue
Disabled test:
- spider/bugfix.mdev_27239 because we started to get
+Error 1429 Unable to connect to foreign data source: localhost
-Error 1158 Got an error reading communication packets
- main.delayed
- Bug#54332 Deadlock with two connections doing LOCK TABLE+INSERT DELAYED
This part is disabled for now as it fails randomly with different
warnings/errors (no corruption).
This allows a user to to change the default value of MAX_SEL_ARGS (16000)
in the rare case where they neeed more generated SEL_ARGS (as part of
the range optimizer)
Raise notes if indexes cannot be used:
- in case of data type or collation mismatch (diferent error messages).
- in case if a table field was replaced to something else
(e.g. Item_func_conv_charset) during a condition rewrite.
Added option to write warnings and notes to the slow query log for
slow queries.
New variables added/changed:
- note_verbosity, with is a set of the following options:
basic - All old notes
unusable_keys - Print warnings about keys that cannot be used
for select, delete or update.
explain - Print unusable_keys warnings for EXPLAIN querys.
The default is 'basic,explain'. This means that for old installations
the only notable new behavior is that one will get notes about
unusable keys when one does an EXPLAIN for a query. One can turn all
of all notes by either setting note_verbosity to "" or setting sql_notes=0.
- log_slow_verbosity has a new option 'warnings'. If this is set
then warnings and notes generated are printed in the slow query log
(up to log_slow_max_warnings times per statement).
- log_slow_max_warnings - Max number of warnings written to
slow query log.
Other things:
- One can now use =ALL for any 'set' variable to set all options at once.
For example using "note_verbosity=ALL" in a config file or
"SET @@note_verbosity=ALL' in SQL.
- mysqldump will in the future use @@note_verbosity=""' instead of
@sql_notes=0 to disable notes.
- Added "enum class Data_type_compatibility" and changing the return type
of all Field::can_optimize*() methods from "bool" to this new data type.
Reviewer & Co-author: Alexander Barkov <bar@mariadb.com>
- The code that prints out the notes comes mainly from Alexander
don't construct open ranges from prefix blob keys for < (less than)
just as it's already done for > (greater than)
because prefix KEY_PART doesn't create prefix Field for blobs
(see open_table_from_share() near "Create a new field for the key part"),
so stored_field_cmp_to_item() will compare the original field to the
value not taking the prefix length into account.
LooseScan code set opt_range_condition_rows to be the
MIN(loose_scan_plan->records, table->records)
totally ignoring possible quick range selects. If there was a quick
select $QUICK on another index with
$QUICK->records < loose_scan_plan->records
this would create a situation where
opt_range_condition_rows > $QUICK->records
which causes an assert in 10.6+ and potentially wrong query plan
choice in 10.5.
Fixed by making opt_range_condition_rows to be the minimum #rows
of any quick select.
Approved-by: Monty <monty@mariadb.org>
