Partial commit of the greater MDEV-34348 scope.
MDEV-34348: MariaDB is violating clang-16 -Wcast-function-type-strict
Various additional fixes, each too small to put into
their own commit.
Reviewed By:
============
Marko Mäkelä <marko.makela@mariadb.com>
The `Item` class methods `get_copy()`, `build_clone()`, and `clone_item()`
face an issue where they may be defined in a descendant class
(e.g., `Item_func`) but not in a further descendant (e.g., `Item_func_child`).
This can lead to scenarios where `build_clone()`, when operating on an
instance of `Item_func_child` with a pointer to the base class (`Item`),
returns an instance of `Item_func` instead of `Item_func_child`.
Since this limitation cannot be resolved at compile time, this commit
introduces runtime type checks for the copy/clone operations.
A debug assertion will now trigger in case of a type mismatch.
`get_copy()`, `build_clone()`, and `clone_item()` are no more virtual,
but virtual `do_get_copy()`, `do_build_clone()`, and `do_clone_item()`
are added to the protected section of the class `Item`.
Additionally, const qualifiers have been added to certain methods
to enhance code reliability.
Reviewer: Oleksandr Byelkin <sanja@mariadb.com>
rpl_semi_sync_slave_enabled_consistent.test and the first part of
the commit message comes from Brandon Nesterenko.
A test to show how to induce the "Read semi-sync reply magic number
error" message on a primary. In short, if semi-sync is turned on
during the hand-shake process between a primary and replica, but
later a user negates the rpl_semi_sync_slave_enabled variable while
the replica's IO thread is running; if the io thread exits, the
replica can skip a necessary call to kill_connection() in
repl_semisync_slave.slave_stop() due to its reliance on a global
variable. Then, the replica will send a COM_QUIT packet to the
primary on an active semi-sync connection, causing the magic number
error.
The test in this patch exits the IO thread by forcing an error;
though note a call to STOP SLAVE could also do this, but it ends up
needing more synchronization. That is, the STOP SLAVE command also
tries to kill the VIO of the replica, which makes a race with the IO
thread to try and send the COM_QUIT before this happens (which would
need more debug_sync to get around). See THD::awake_no_mutex for
details as to the killing of the replica’s vio.
Notes:
- The MariaDB documentation does not make it clear that when one
enables semi-sync replication it does not matter if one enables
it first in the master or slave. Any order works.
Changes done:
- The rpl_semi_sync_slave_enabled variable is now a default value for
when semisync is started. The variable does not anymore affect
semisync if it is already running. This fixes the original reported
bug. Internally we now use repl_semisync_slave.get_slave_enabled()
instead of rpl_semi_sync_slave_enabled. To check if semisync is
active on should check the @@rpl_semi_sync_slave_status variable (as
before).
- The semisync protocol conflicts in the way that the original
MySQL/MariaDB client-server protocol was designed (client-server
send and reply packets are strictly ordered and includes a packet
number to allow one to check if a packet is lost). When using
semi-sync the master and slave can send packets at 'any time', so
packet numbering does not work. The 'solution' has been that each
communication starts with packet number 1, but in some cases there
is still a chance that the packet number check can fail. Fixed by
adding a flag (pkt_nr_can_be_reset) in the NET struct that one can
use to signal that packet number checking should not be done. This
is flag is set when semi-sync is used.
- Added Master_info::semi_sync_reply_enabled to allow one to configure
some slaves with semisync and other other slaves without semisync.
Removed global variable semi_sync_need_reply that would not work
with multi-master.
- Repl_semi_sync_master::report_reply_packet() can now recognize
the COM_QUIT packet from semisync slave and not give a
"Read semi-sync reply magic number error" error for this case.
The slave will be removed from the Ack listener.
- On Windows, don't stop semisync Ack listener just because one
slave connection is using socket_id > FD_SETSIZE.
- Removed busy loop in Ack_receiver::run() by using
"Self-pipe trick" to signal new slave and stop Ack_receiver.
- Changed some Repl_semi_sync_slave functions that always returns 0
from int to void.
- Added Repl_semi_sync_slave::slave_reconnect().
- Removed dummy_function Repl_semi_sync_slave::reset_slave().
- Removed some duplicate semisync notes from the error log.
- Add test of "if (get_slave_enabled() && semi_sync_need_reply)"
before calling Repl_semi_sync_slave::slave_reply().
(Speeds up the code as we can skip all initializations).
- If epl_semisync_slave.slave_reply() fails, we disable semisync
for that connection.
- We do not call semisync.switch_off() if there are no active slaves.
Instead we check in Repl_semi_sync_master::commit_trx() if there are
no active threads. This simplices the code.
- Changed assert() to DBUG_ASSERT() to ensure that the DBUG log is
flushed in case of asserts.
- Removed the internal rpl_semi_sync_slave_status as it is not needed
anymore. The @@rpl_semi_sync_slave_status status variable is now
mapped to rpl_semi_sync_enabled.
- Removed rpl_semi_sync_slave_enabled as it is not needed anymore.
Repl_semi_sync_slave::get_slave_enabled() contains the active status.
- Added checking that we do not add a slave twice with
Ack_receiver::add_slave(). This could happen with old code.
- Removed Repl_semi_sync_master::check_and_switch() as it is not
needed anymore.
- Ensure that when we call Ack_receiver::remove_slave() that the slave
is removed from the listener before function returns.
- Call listener.listen_on_sockets() outside of mutex for better
performance and less contested mutex.
- Ensure that listening is ignoring newly added slaves when checking for
responses.
- Fixed the master ack_receiver listener is not killed if there are no
connected slaves (and thus stop semisync handling of future
connections). This could happen if all slaves sockets where would be
marked as unreliable.
- Added unlink() to base_ilist_iterator and remove() to
I_List_iterator. This enables us to remove 'dead' slaves in
Ack_recever::run().
- kill_zombie_dump_threads() now does killing of dump threads properly.
- It can now kill several threads (should be impossible but could
happen if IO slaves reconnects very fast).
- We now wait until the dump thread is done before starting the
dump.
- Added an error if kill_zombie_dump_threads() fails.
- Set thd->variables.server_id before calling
kill_zombie_dump_threads(). This simplies the code.
- Added a lot of comments both in code and tests.
- Removed DBUG_EVALUATE_IF "failed_slave_start" as it is not used.
Test changes:
- rpl.rpl_session_var2 added which runs rpl.rpl_session_var test with
semisync enabled.
- Some timings changed slight with startup of slave which caused
rpl_binlog_dump_slave_gtid_state_info.text to fail as it checked the
error log file before the slave had started properly. Fixed by
adding wait_for_pattern_in_file.inc that allows waiting for the
pattern to appear in the log file.
- Tests have been updated so that we first set
rpl_semi_sync_master_enabled on the master and then set
rpl_semi_sync_slave_enabled on the slaves (this is according to how
the MariaDB documentation document how to setup semi-sync).
- Error text "Master server does not have semi-sync enabled" has been
replaced with "Master server does not support semi-sync" for the
case when the master supports semi-sync but semi-sync is not
enabled.
Other things:
- Some trivial cleanups in Repl_semi_sync_master::update_sync_header().
- We should in 11.3 changed the default value for
rpl-semi-sync-master-wait-no-slave from TRUE to FALSE as the TRUE
does not make much sense as default. The main difference with using
FALSE is that we do not wait for semisync Ack if there are no slave
threads. In the case of TRUE we wait once, which did not bring any
notable benefits except slower startup of master configured for
using semisync.
Co-author: Brandon Nesterenko <brandon.nesterenko@mariadb.com>
This solves the problem reported in MDEV-32960 where a new
slave may not be registered in time and the master disables
semi sync because of that.
Use SELECT_LEX to save lists for ORDER BY and GROUP BY before parsing
WINDOW clauses / specifications. This is needed for proper parsing
of a nested WINDOW clause when a WINDOW clause is used in a subquery
contained in another WINDOW clause.
Fix assignment of empty SQL_I_List to another one (in case of empty list
next shoud point on first).
For "const char *" replace() and after() accepted const as "T *" and
passed forward "void *". This cannot be cast implicitly, so we better
use "const void *" instead of "void *" in the input interface. This
way we avoid problems with using List for any const type.
New iterator has the fastest possible implementation: just moves one pointer.
It's faster that List_iterator and List_iterator_fast: both do more on increment.
Overall patch brings:
1) work compile times
2) possibly(!) worse debug build performance
3) definitely better optimized build performance
4) ability to write less code
5) ability to write less bug-prone code
Problem:-
If we try to run this query with -WITH_ASAN=ON compiled server
CREATE TABLE t1 (i INT);
SET debug_dbug="+d,test_completely_invisible,test_invisible_index";
CREATE TABLE t2 LIKE t1;
This will generate a stack buffer overflow error.
==8922==ERROR: AddressSanitizer: stack-buffer-overflow on address #ADDR
Analyze:-
Error is generated on this line
if (((*last)=new list_node(info, &end_of_list)))
So info is our Key*, &end_of_list is global variable and last == #ADDR
So last is suspicious variable. And last is the variable present in alter_info
->key_list. Now the question is how this key_list->last gets wrong/
different stack variable. In the backtrace, we can see that key_list is
generated in mysql_create_table_like_table by calling
mysql_preapre_alter_table_function and dummy key_list is created by
mysql_create_like_table. In the end on mysql_prepare_alter_table we call
alter_info->key_list.swap(new_key_list);
So there is two options either key_list is empty or not empty , IF it is not
empty then there is no issues last ptr is replaced by thd->mem_root (allocated ptr)
So problem arises when key_list is empty. It swaps the dummy last ptr by
mysql_prepare_alter_table declared ptr. which is wrong.
Solution:-
We wont swap variable if list does not have any element.
Remove unused InnoDB function parameters and functions.
i_s_sys_virtual_fill_table(): Do not allocate heap memory.
mtr_is_block_fix(): Replace with mtr_memo_contains().
mtr_is_page_fix(): Replace with mtr_memo_contains_page().
TRASH was mapped to TRASH_FREE and was supposed to be used for memory
that should not be accessed anymore, while TRASH_ALLOC() is to be
used for uninitialized but to-be-used memory.
But sometimes TRASH() was used in the latter sense.
Remove TRASH() macro, always use explicit TRASH_ALLOC() or TRASH_FREE().
- Remove not used thd_rpl_is_parallel()
- Remove not used mysql_notify_thread_having_shared_lock()
- Remove not needed LOCK_thread_count from MYSQL_BIN_LOG::reset_logs()
- LOCK_thread_count is not protecting against rollback, so this
code and comment is not needed
- Remove mutex_locks in slave.cc that are not needed.
Added THD::assert_not_linked() to ensure that it was safe to remove
- Fixed not repeatable test load_data_stmt_view
- Updated binlog_killed to test removal of mutex
(thanks to Andrei Elkin for test)
- More code comments
- Added sql/mariadb.h file that should be included first by files in sql
directory, if sql_plugin.h is not used (sql_plugin.h adds SHOW variables
that must be done before my_global.h is included)
- Removed a lot of include my_global.h from include files
- Removed include's of some files that my_global.h automatically includes
- Removed duplicated include's of my_sys.h
- Replaced include my_config.h with my_global.h
Benefits of this patch:
- Removed a lot of calls to strlen(), especially for field_string
- Strings generated by parser are now const strings, less chance of
accidently changing a string
- Removed a lot of calls with LEX_STRING as parameter (changed to pointer)
- More uniform code
- Item::name_length was not kept up to date. Now fixed
- Several bugs found and fixed (Access to null pointers,
access of freed memory, wrong arguments to printf like functions)
- Removed a lot of casts from (const char*) to (char*)
Changes:
- This caused some ABI changes
- lex_string_set now uses LEX_CSTRING
- Some fucntions are now taking const char* instead of char*
- Create_field::change and after changed to LEX_CSTRING
- handler::connect_string, comment and engine_name() changed to LEX_CSTRING
- Checked printf() related calls to find bugs. Found and fixed several
errors in old code.
- A lot of changes from LEX_STRING to LEX_CSTRING, especially related to
parsing and events.
- Some changes from LEX_STRING and LEX_STRING & to LEX_CSTRING*
- Some changes for char* to const char*
- Added printf argument checking for my_snprintf()
- Introduced null_clex_str, star_clex_string, temp_lex_str to simplify
code
- Added item_empty_name and item_used_name to be able to distingush between
items that was given an empty name and items that was not given a name
This is used in sql_yacc.yy to know when to give an item a name.
- select table_name."*' is not anymore same as table_name.*
- removed not used function Item::rename()
- Added comparision of item->name_length before some calls to
my_strcasecmp() to speed up comparison
- Moved Item_sp_variable::make_field() from item.h to item.cc
- Some minimal code changes to avoid copying to const char *
- Fixed wrong error message in wsrep_mysql_parse()
- Fixed wrong code in find_field_in_natural_join() where real_item() was
set when it shouldn't
- ER_ERROR_ON_RENAME was used with extra arguments.
- Removed some (wrong) ER_OUTOFMEMORY, as alloc_root will already
give the error.
TODO:
- Check possible unsafe casts in plugin/auth_examples/qa_auth_interface.c
- Change code to not modify LEX_CSTRING for database name
(as part of lower_case_table_names)
- Rename Window_funcs_computation to Window_funcs_computation_step
- Introduce Window_func_sort which invokes filesort and then
invokes computation of all window functions that use this ordering.
- Expose Window functions' sort operations in EXPLAIN|ANALYZE FORMAT=JSON
that the call-back comparison function returns a positive
number when arg1 < arg2, and a negative number when arg1 > arg2.
This is not in line with other implementation of sorting
algorithm.
Changed bubble_sort: now a negative result from the comparison
function means that arg1 < arg2, and positive result means
that arg1 > arg2.
Changed accordingly all call-back functions that are used as
parameters in the call of bubble_sort.
Added a test case to check the proper sorting of window functions.
Creating a CONNECT object on client connect and pass this to the working thread which creates the THD.
Split LOCK_thread_count to different mutexes
Added LOCK_thread_start to syncronize threads
Moved most usage of LOCK_thread_count to dedicated functions
Use next_thread_id() instead of thread_id++
Other things:
- Thread id now starts from 1 instead of 2
- Added cast for thread_id as thread id is now of type my_thread_id
- Made THD->host const (To ensure it's not changed)
- Removed some DBUG_PRINT() about entering/exiting mutex as these was already logged by mutex code
- Fixed that aborted_connects and connection_errors_internal are counted in all cases
- Don't take locks for current_linfo when we set it (not needed as it was 0 before)
The following left in semi-improved state to keep patch size reasonable:
- Field operator new: left thd_alloc(current_thd)
- Sql_alloc operator new: left thd_alloc(thd_get_current_thd())
- Item_args constructors: left thd_alloc(thd)
- Item_func_interval::fix_length_and_dec(): no THD arg, have to call current_thd
- Item_func_dyncol_exists::val_int(): same
- Item_dyncol_get::val_str(): same
- Item_dyncol_get::val_int(): same
- Item_dyncol_get::val_real(): same
- Item_dyncol_get::val_decimal(): same
- Item_singlerow_subselect::fix_length_and_dec(): same
- Changed ER(ER_...) to ER_THD(thd, ER_...) when thd was known or if there was many calls to current_thd in the same function.
- Changed ER(ER_..) to ER_THD_OR_DEFAULT(current_thd, ER...) in some places where current_thd is not necessary defined.
- Removing calls to current_thd when we have access to thd
Part of this is optimization (not calling current_thd when not needed),
but part is bug fixing for error condition when current_thd is not defined
(For example on startup and end of mysqld)
Notable renames done as otherwise a lot of functions would have to be changed:
- In JOIN structure renamed:
examined_rows -> join_examined_rows
record_count -> join_record_count
- In Field, renamed new_field() to make_new_field()
Other things:
- Added DBUG_ASSERT(thd == tmp_thd) in Item_singlerow_subselect() just to be safe.
- Removed old 'tab' prefix in JOIN_TAB::save_explain_data() and use members directly
- Added 'thd' as argument to a few functions to avoid calling current_thd.
